Commit graph

95 commits

Author SHA1 Message Date
Leo Yu-Chi Liang
d5af15bf51 riscv: Clean up asm/io.h
Clean up asm/io.h by
- removing commented code
- removing outdated comments
- removing unused definitions (for mem_isa, mem_pci)

This massively improves the readability of the file.

Suggested by commits:
7ab2e47d27 ("arm: Clean up asm/io.h")
909d0399a5 ("ARM: asm/io.h: kill off confusing #ifdef __mem_pci block")

Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-26 18:41:21 +08:00
Michal Simek
8ac37b461c riscv: remove CONFIG_ARCH_MAP_SYSMEM from io.h
Commit ba1ed5b022 ("Convert CONFIG_ARCH_MAP_SYSMEM to Kconfig") clearly
defined that this option is available for SANDBOX (was also for already
removed NDS32). That's why there is no way how this code can be enabled
with current Kconfig layout for riscv.
Based on this removing this code.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-26 18:38:02 +08:00
Heinrich Schuchardt
ca7e93fa9f riscv: provide missing base extension functions
Provide library functions to read:

* machine vendor ID
* machine architecture ID
* machine implementation ID

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2022-04-06 09:40:05 +08:00
Heinrich Schuchardt
70ae54bd25 cmd: sbi: add Performance Monitoring Unit Extension
Version 1.0-rc3 of the RISC-V Supervisor Binary Interface Specification
has added the Performance Monitoring Unit Extension.

The sbi command should be able to detect it.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-04-06 09:40:05 +08:00
Simon Glass
7fe32b3442 event: Convert arch_cpu_init_dm() to use events
Instead of a special function, send an event after driver model is inited
and adjust the boards which use this function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-10 08:28:36 -05:00
Heinrich Schuchardt
185f812c41 doc: replace @return by Return:
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 18:11:34 +01:00
Wei Fu
41635cca6e riscv: add #define in asm/io.h for some device drivers
This patch adds memcpy_fromio and memcpy_toio definitions for some device
drivers which have these definitions, like cadence_qspi_apb.c

Signed-off-by: Wei Fu <wefu@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-08 15:35:55 +08:00
Heinrich Schuchardt
afb8e1f067 riscv: function to retrieve SBI implementation version
Provide function sbi_get_impl_version() to retrieve the SBI implementation
version.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-11-08 15:35:55 +08:00
Nick Hu
ddf4972834 riscv: Avoid io read/write cause wrong result
io read/write may cause wrong result because they may read/write data
from/to register instead of memory. Add 'volatile' to avoid it.

Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-10-20 10:59:17 +08:00
Heinrich Schuchardt
24ed5317d4 sysreset: provide SBI based sysreset driver
Provide sysreset driver using the SBI system reset extension.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Samuel Holland <samuel@sholland.org>
2021-10-07 16:08:23 +08:00
Heinrich Schuchardt
3fbcfaa6f3 riscv: add missing SBI extension definitions
Add the System Reset Extension and the Hart State Management Extension
definitions.

Add missing RFENCE Extension enum values.

The SBI 0.1 extension constants are needed for the sbi command. Remove
an #ifdef.

Cf. https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-10-07 16:08:23 +08:00
Zong Li
30fa33dc80 riscv: lib: modify the indent
We usually use a space in function declaration, rather than a tab.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-07 10:34:29 +08:00
Zong Li
835210a125 board: sifive: use ccache driver instead of helper function
Invokes the common cache_init function to initialize ccache.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-07 10:34:29 +08:00
Zong Li
05e254862f board: sifive: Add an interface to get PCB revision
There are different DDR parameter settings for different board
revisions. Add a new interface to get the PCB revision to determine
which DT should be selected at runtime.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-06 20:24:25 +08:00
Green Wan
a74e9d899d riscv: cpu: fu740: Add support for cpu fu740
Add SiFive fu740 cpu to support RISC-V arch

Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-31 16:35:53 +08:00
Bin Meng
a6d7e8c914 riscv: Split SiFive CLINT support between SPL and U-Boot proper
At present there is only one Kconfig option CONFIG_SIFIVE_CLINT to
control the enabling of SiFive CLINT support in both SPL (M-mode)
and U-Boot proper (S-mode). So for a typical SPL config that the
SiFive CLINT driver is enabled in both SPL and U-Boot proper, that
means the S-mode U-Boot tries to access the memory-mapped CLINT
registers directly, instead of the normal 'rdtime' instruction.

This was not a problem before, as the hardware does not forbid the
access from S-mode. However this becomes an issue now with OpenSBI
commit 8b569803475e ("lib: utils/sys: Add CLINT memregion in the root domain")
that the SiFive CLINT register space is protected by PMP for M-mode
access only. U-Boot proper does not boot any more with the latest
OpenSBI, that access exceptions are fired forever from U-Boot when
trying to read the timer value via the SiFive CLINT driver in U-Boot.

To solve this, we need to split current SiFive CLINT support between
SPL and U-Boot proper, using 2 separate Kconfig options.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-05-17 16:42:24 +08:00
Patrick Delaunay
77b8cfef53 lmb: move CONFIG_LMB in Kconfig
Migrate CONFIG_LMB in Kconfig.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-22 14:09:45 -04:00
Heinrich Schuchardt
8f0dc4cfd1 riscv: assembler versions of memcpy, memmove, memset
Provide optimized versions of memcpy(), memmove(), memset() copied from
the Linux kernel.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08 15:37:29 +08:00
Bin Meng
86c915628d riscv: Change phys_addr_t and phys_size_t to 64-bit
phys_addr_t and phys_size_t are currently defined as `unsigned long`,
but RV32 supports 34-bit physical address, hence both phys_addr_t and
phys_size_t should be defined to 64-bit using `unsigned long long`.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
2021-02-03 03:38:41 -07:00
Padmarao Begari
5af3574f6a riscv: Add DMA 64-bit address support
dma_addr_t holds any valid DMA address. If the DMA API only uses 32/64-bit
addresses, dma_addr_t need only be 32/64 bits wide.

Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-01-18 11:06:38 +08:00
Simon Glass
8a8d24bdf1 dm: treewide: Rename ..._platdata variables to just ..._plat
Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Sean Anderson
f760c9a1fd riscv: Use a valid bit to ignore already-pending IPIs
Some IPIs may already be pending when U-Boot is started. This could be a
problem if a secondary hart tries to handle an IPI before the boot hart has
initialized the IPI device.

To be specific, the Kendryte K210 ROM-based bootloader does not clear IPIs
before passing control to U-Boot. Without this patch, the secondary hart
jumps to address 0x0 as soon as it enters secondary_hart_loop, and then
hangs in its trap handler.

This commit introduces a valid bit so secondary harts know when and IPI
originates from U-Boot, and it is safe to use the IPI API. The valid bit is
initialized to 0 by board_init_f_init_reserve. Before this, secondary harts
wait in wait_for_gd_init.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Leo Liang <ycliang@andestech.com>
2020-09-30 08:54:52 +08:00
Sean Anderson
e86463f8e3 riscv: Rework Andes PLMT as a UCLASS_TIMER driver
This converts the PLMT driver from the riscv-specific timer interface to be
a DM-based UCLASS_TIMER driver.

The clock-frequency/clocks properties are preferred over timebase-frequency
for two reasons. First, properties which affect a device should be located
near its binding in the device tree. Using timebase-frequency only really
makes sense when the cpu itself is the timer device. This is the case when
we read the time from a CSR, but not when there is a separate device.
Second, it lets the device use the clock subsystem which adds flexibility.
If the device is configured for a different clock speed, the timer can
adjust itself.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-09-30 08:54:45 +08:00
Heinrich Schuchardt
6b9966e1aa riscv: define function set_gd()
Function set_gd() is needed in the UEFI sub-system if the global data
pointer is stored in a register.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-14 23:28:52 +02:00
Heinrich Schuchardt
c92b50a44b cmd: provide command sbi
Provide a command to display information about the SBI implementation.

The output might look like:

=> sbi
SBI 0.2
OpenSBI
Extensions:
  sbi_set_timer
  sbi_console_putchar
  sbi_console_getchar
  sbi_clear_ipi
  sbi_send_ipi
  sbi_remote_fence_i
  sbi_remote_sfence_vma
  sbi_remote_sfence_vma_asid
  sbi_shutdown
  SBI Base Functionality
  Timer Extension
  IPI Extension
  RFENCE Extension
  Hart State Management Extension

The command can be used to construct a unit test checking that the
communication with the SEE is working.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@openfive.com>
Tested-by:  Pragnesh Patel <pragnesh.patel@openfive.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Tested-by: Rick Chen <rick@andestech.com>
2020-08-25 09:34:47 +08:00
Bin Meng
d6a01704b0 riscv: sifive/fu540: spl: Rename soc_spl_init()
spl_soc_init() seems to be a better name, as all SPL functions
names start from the spl_ prefix.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14 14:38:53 +08:00
Bin Meng
71672b784c riscv: Call spl_board_init_f() in the generic SPL board_init_f()
The generic SPL version of board_init_f() should give a call to
board specific codes to initialize board in the SPL phase.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-08-14 14:38:53 +08:00
Sagar Shrikant Kadam
d04a46426b sifive: reset: add DM based reset driver for SiFive SoC's
PRCI module within SiFive SoC's has register with which we can
reset the sub-systems within the SoC. The resets to DDR and ethernet
sub systems within FU540-C000 SoC are active low, and are hold low
by default on power-up. Currently these are directly asserted within
prci driver via register read/write.
With the DM based reset driver support here, we bind the reset
driver with clock (prci) driver and assert the reset signals of
both sub-system's appropriately.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
2020-08-04 09:19:41 +08:00
Tom Rini
6e7d7aa2e2 Merge branch 'next'
Merge all outstanding changes from the current next branch in now that
we have released.
2020-07-06 15:46:38 -04:00
Pragnesh Patel
5ce50206ed riscv: sifive: fu540: enable all cache ways from U-Boot proper
Add L2 cache node to enable all cache ways from U-Boot proper.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-03 15:09:06 +08:00
Sean Anderson
b8bc120927 riscv: Add option to support RISC-V privileged spec 1.9
Some older processors (notably the Kendryte K210) use an older version of
the RISC-V privileged specification. The primary changes between the old
and new are in virtual memory, and in the merging of three separate counter
enable CSRs.  Using the new CSR on an old processor causes an illegal
instruction exception.  This patch adds an option to use the old CSRs
instead of the new one.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-01 15:01:22 +08:00
Sean Anderson
40686c394e riscv: Clean up IPI initialization code
The previous IPI code initialized the device whenever the first call was
made to a riscv_*_ipi function. This made it difficult to determine when
the IPI device was initialized. This patch introduces a new function
riscv_init_ipi. It is called once during arch_cpu_init_dm. In SPL, it is
called in spl_invoke_opensbi. Before this point, no riscv_*_ipi functions
should be called.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-07-01 15:01:22 +08:00
Sean Anderson
309c79f3de riscv: Add headers for asm/global_data.h
This header depended on bd_t and ulong, but did not include the appropriate
headers.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-01 15:01:21 +08:00
Simon Glass
b46f989bb7 bdinfo: riscv: Use generic bd_info
At present riscv still uses its own private bd_info struct. Move it over
to use the generic one like other archs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-25 13:24:10 -04:00
Bin Meng
fe94355716 riscv: sbi: Remove sbi_spec_version
U-Boot defaults to use SBI v0.2. Howerver there is a global variable
sbi_spec_version that stills refers to v0.1. Since it is not used
anywhere, let's remove it.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-06-04 09:44:21 +08:00
Pragnesh Patel
01cdef22ee riscv: sifive: fu540: add SPL configuration
Add a support for SPL which will boot from L2 LIM (0x0800_0000) and
then SPL will boot U-Boot FIT image (OpenSBI FW_DYNAMIC + u-boot.bin)
from MMC boot devices.

SPL related code is leveraged from FSBL
(https://github.com/sifive/freedom-u540-c000-bootloader.git)

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04 09:44:09 +08:00
Pragnesh Patel
7c45fc9870 riscv: cpu: fu540: Add support for cpu fu540
Add SiFive fu540 cpu to support RISC-V arch

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04 09:44:09 +08:00
Atish Patra
7e249bc13a riscv: Move all SMP related SBI calls to SBI_v01
SMP support for S-mode U-Boot is enabled only if SBI_V01 is enabled.
There is no point in supporting SMP related (IPI and fences) SBI calls
when SBI_V02 is enabled.

Modify all the SMP related SBI calls to be defined only for SBI_V01.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-26 15:50:08 +08:00
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Atish Patra
d4ea649f17 riscv: Provide a mechanism to fix DT for reserved memory
In RISC-V, M-mode software can reserve physical memory regions
by setting appropriate physical memory protection (PMP) csr. As the
PMP csr are accessible only in M-mode, S-mode U-Boot can not read
this configuration directly. However, M-mode software can pass this
information via reserved-memory node in device tree so that S-mode
software can access this information.

This patch provides a framework to copy to the reserved-memory node
from one DT to another. This will be used to update the DT used by
U-Boot and the DT passed to the next stage OS.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-23 10:14:16 +08:00
Bin Meng
191636e448 riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL
With SBI v0.2 HSM extension, only a single hart need to boot and
enter operating system. The booting hart can bring up secondary
harts one by one afterwards.

For U-Boot running in SPL, SMP can be turned on, while in U-Boot
proper, SMP can be optionally turned off if using SBI v0.2 HSM.

Introduce a new SPL_SMP Kconfig option to support this.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-23 10:14:06 +08:00
Bin Meng
5bde2152d4 riscv: Implement new SBI v0.2 extensions
Few v0.1 SBI calls are being replaced by new SBI calls that follows
v0.2 calling convention.

Implement the replacement extensions and few additional new SBI
function calls that makes way for a better SBI interface in future.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17 11:29:54 +08:00
Bin Meng
1b3c8d6402 riscv: Introduce a new config for SBI v0.1
We now have SBI v0.2 which is more scalable and extendable to handle
future needs for RISC-V supervisor interfaces.

Introduce a new config and move all SBI v0.1 code under that config.
This allows to implement the new replacement SBI extensions cleanly
and remove v0.1 extensions easily in future. Currently, the config
is enabled by default. Once all M-mode software, with v0.1, is no
longer in use, this config option and all relevant code can be easily
removed.

This commit is inspired from Linux kernel patch:
https://patchwork.kernel.org/patch/11407361/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17 11:29:54 +08:00
Bin Meng
1e32715602 riscv: Add SBI v0.2 extension definitions
Few v0.1 SBI calls are being replaced by new SBI calls that follows
v0.2 calling convention.

This patch just defines these new extensions.

This commit is inspired from Linux kernel patch:
https://patchwork.kernel.org/patch/11407359/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17 11:29:54 +08:00
Bin Meng
f58fc34a2b riscv: Add basic support for SBI v0.2
The SBI v0.2 introduces a base extension which is backward compatible
with v0.1. Implement all helper functions and minimum required SBI
calls from v0.2 for now. All other base extension function will be
added later as per need.

As v0.2 calling convention is backward compatible with v0.1, remove
the v0.1 helper functions and just use v0.2 calling convention.

Add a new Kconfig options CONFIG_SBI for the new SBI v0.2 codes, and
let CONFIG_SBI_IPI depend on it.

This commit is inspired from Linux kernel patch:
https://patchwork.kernel.org/patch/11407363/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17 11:29:54 +08:00
Bin Meng
215c3a7701 riscv: Mark existing SBI as v0.1 SBI
As per the new SBI specification, current SBI implementation version
is defined as 0.1 and will be removed/replaced in future. Each of the
function call in 0.1 is defined as a separate extension which makes
easier to replace them one at a time.

Rename existing implementation to reflect that. This patch is just
a preparatory patch for SBI v0.2 and doesn't introduce any functional
changes.

This commit is inspired from Linux kernel patch:
https://patchwork.kernel.org/patch/11407355/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17 11:29:54 +08:00
Bin Meng
fe13692e23 riscv: Fix sbi_remote_sfence_vma{,_asid}
Currently sbi_remote_sfence_vma{,_asid} does not pass their arguments
to SBI at all, which is semantically incorrect.

This keeps in sync with Linux kernel commit:
  a21344dfc6ad: fix sbi_remote_sfence_vma{,_asid}

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas@auer.io>
2020-03-17 11:29:40 +08:00
Masahiro Yamada
9d86b89c59 dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>
The implementation of dma_map_single() and dma_unmap_single() is
exactly the same for all the architectures that support them.

Factor them out to <linux/dma-mapping.h>, and make all drivers to
include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>.

If we need to differentiate them for some architectures, we can
move the generic definitions to <asm-generic/dma-mapping.h>.

Add some comments to the helpers. The concept is quite similar to
the DMA-API of Linux kernel. Drivers are agnostic about what is
going on behind the scene. Just call dma_map_single() before the
DMA, and dma_unmap_single() after it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19 21:27:30 +08:00
Masahiro Yamada
950c596867 dma-mapping: fix the prototype of dma_unmap_single()
dma_unmap_single() takes the dma address, not virtual address.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19 21:27:30 +08:00
Masahiro Yamada
c22c0dbd7d dma-mapping: fix the prototype of dma_map_single()
Make dma_map_single() return the dma address, and remove the
pointless volatile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19 21:27:30 +08:00