Commit graph

18 commits

Author SHA1 Message Date
Patrice Chotard
fe63d3cfb7 ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7
Synchronize stm32f7 device tree with kernel v4.20.

All pinctrl bindings are updated.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:06 +02:00
Patrice Chotard
01aabf97d1 ARM: dts: stm32: Migrate U-boot nodes to U-boot DT files for stm32f7
In order to prepare and ease future DT synchronization with kernel
DT, migrate all U-boot specific nodes/properties/addons to
U-boot DT files.

Migrate also DT nodes which are not yet available on kernel DT side
as ethernet, ltdc and qspi nodes.

Fix ethernet_mii pins and add missing qspi_pins for stm32746g-eval

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:01 +02:00
Neil Armstrong
ffd4c7c2ec dts: switch spi-flash to jedec, spi-nor compatible
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot
dts files. This compatible has been added in sf_probe, let use it.

This patch switches to jedec,spi-nor when spi-flash is used in the DTS
and DTSI files, and removed spi-flash when jedec,spi-nor is already
present.

The x86 dts are switched in a separate commit since it depends on a change
in fdtdec.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-04-12 10:54:27 +05:30
Patrice Chotard
6effb56fbc ARM: dts: stm32: remove cd-inverted for stm32f746-disco
As cd-inverted property is no more used by arm_pl180_mmci driver,
remove it. Update cd-gpios active level accordingly.

Reported-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-13 14:04:04 -04:00
yannick fertre
455141636f arm: dts: stm32: add display for STM32F746 disco board
Enable the display controller, panel & backlight.
Set panel display timings & set the RGB data bus.

Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19 11:00:23 +01:00
Patrice Chotard
77729bd744 ARM: DTS: stm32: add MMC nodes for stm32f746-disco and stm32f769-disco
Add DT nodes to enable ARM_PL180_MMCI IP support for STM32F746
and STM32F769 discovery boards

There is a hardware issue on these boards, it misses a pullup on the GPIO line
used as card detect to allow correct SD card detection.
As workaround, cd-gpios property is not present in DT.
So SD card is always considered present in the slot.

Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-10 08:05:48 -05:00
Patrice Chotard
4eefb0070d ARM: DTS: stm32: remove useless mr-nbanks property
FMC driver is now able to discover the bank number by
parsing bank subnodes.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-26 11:29:15 -04:00
Vikas Manocha
bd4a985f50 stm32f7: move board specific pin muxing to dts
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:57:24 -04:00
Vikas Manocha
bfea69ad27 stm32f7: sdram: correct sdram configuration as per micron sdram
Actually the sdram memory on stm32f746 discovery board is micron part
MT48LC_4M32_B2B5_6A. This patch does the modification required in the
device tree node & driver for the same.

Also we are passing here all the timing parameters in terms of clock
cycles, so no need to convert time(ns or ms) to cycles.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:57:22 -04:00
Vikas Manocha
2f80a9f72e stm32f746: to switch on user LED1 & read user button
All discovery boards have one user button & one user LED. Here we are
just reading the button status & switching ON the user LED.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:57:21 -04:00
Vikas Manocha
d33a6a2f06 ARM: DT: stm32f7: add gpio device tree nodes
Also created alias for gpios for stm32f7 discovery board. Based on these
aliases, it would be possible to get gpio devices by sequence.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:57:20 -04:00
Vikas Manocha
6c9a10034a stm32f7: sdram: use sdram device tree node to configure sdram controller
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:39:05 -04:00
Vikas Manocha
fd198ee1a8 ARM: DT: stm32f7: add sdram pin contol node
Also added DT binding doc for stm32 fmc(flexible memory controller).

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:39:03 -04:00
Vikas Manocha
e245f1a5db ARM: DT: stm32f7: add qspi pin contol node
It also removes the qspi pin configuration done during the
board initialization.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17 14:15:16 -04:00
Vikas Manocha
c428a95833 ARM: DT: stm32f7: add ethernet pin contol node
It also removes the ethernet pin configuration done during the board
initialization.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17 14:15:16 -04:00
Vikas Manocha
e34e19feb7 ARM: DT: stm32f7: add pin control node for serial port pins
And remove the uart pin configuration from board initialization.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17 14:15:15 -04:00
Vikas Manocha
84bfdc17b5 ARM: DT: stm32f7: add usart1 & clock device tree nodes
Also created alias for usart1 and specified oscillator clock for stm32f7
discovery board.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17 14:15:13 -04:00
Michael Kurz
b1a8de7e07 ARM: DTS: stm32: add stm32f746-disco device tree files
This patch adds the DTS source files needed for stm32f746-disco board
The files are based on the stm32f429/469 files from current linux
kernel.

Source for "arch/arm/dts/armv7-m.dtsi": Linux: "arch/arm/boot/dts/armv7-m.dtsi"

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-01-28 14:04:42 -05:00