Commit graph

633 commits

Author SHA1 Message Date
Neha Malcom Francis
8048a34376 k3: pmic: Clear ESM masks
ESM MCU masks must be set to 0h so that PMIC can handle errors
that require attention for example SYS_SAFETY_ERRn. The required bits
must be cleared: ESM_MCU_RST_MASK, ESM_MCU_FAIL_MASK, ESM_MCU_PIN_MASK.

If PMIC expected to handle errors, make sure EVM is configured to
connect SOC_SAFETY_ERRz (Main) to the PMIC.

Note that even though the User Guide for TPS65941 for J721E mentions
that these bits are reset to 0h; it is not reflected once board boots to
kernel, possibly due to NVM configurations. Eithercase, it is best to
account for this from R5 SPL side as well.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
2023-05-04 13:03:54 -04:00
Vladimir Zapolskiy
1b15483deb misc: add Qualcomm GENI SE QUP device driver
This change adds a Qualcomm GENI SE QUP device driver as a wrapper for
actually enabled and used serial devices found on a board.

At the moment the driver is pretty simple, its intention is to populate
childred devices and provide I/O mem read interface to them as clients,
this is needed for GENI UART driver to set up a proper clock divider
and provide the actually asked baud rate.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
2023-05-02 14:23:58 -04:00
John Keeping
9fea3696ef rockchip: otp: fix misc_read() return values
The documentation for misc_read() says:

    Return: number of bytes read if OK (may be 0 if EOF), -ve on error

The Rockchip efuse driver implements this so it should return the number
of bytes read rather than zero on success.  Fix this so that the driver
follows the usual contract for read operations.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-04-21 15:16:01 +08:00
John Keeping
a48d13535a rockchip: efuse: fix misc_read() return values
The documentation for misc_read() says:

    Return: number of bytes read if OK (may be 0 if EOF), -ve on error

The Rockchip efuse driver implements this so it should return the number
of bytes read rather than zero on success.  Fix this so that the driver
follows the usual contract for read operations.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-04-21 15:16:01 +08:00
Marek Vasut
7d39feb137 misc: ub251xb: Fix use of CONFIG_IS_ENABLED on DM_REGULATOR
The DM_REGULATOR symbol has SPL counterpart in:
  drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR
Use CONFIG_IS_ENABLED() macro to match on the correct
variant depending on the build stage.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08 03:53:23 +02:00
Tom Rini
942ac73afc u-boot-imx-next-20230331 for next
---------------------------------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15819
 
 i.MX patches queued for next:
 
 - Conversions to DM_SERIAL
 - Fixes for Toradex boards
 - Gateworks Boards
 - i.MX8ULP
 - EQoS support / fixes, changes in boards
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZCaU0Q8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76YCKgCgk4OueoIggmes+Ccj8bu1BcQbrfYAoJAgMeKE
 It0hrVAifD62TPb2rmHt
 =hFVG
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-next-20230331' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next

u-boot-imx-next-20230331 for next
---------------------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15819

i.MX patches queued for next:

- Conversions to DM_SERIAL
- Fixes for Toradex boards
- Gateworks Boards
- i.MX8ULP
- EQoS support / fixes, changes in boards
2023-03-31 12:50:34 -04:00
Stephen Carlson
713db6f6d3 drivers: pci: sandbox: Add stub sandbox PCI MPS support
Reports the sandbox swapcase PCI Express device to support a 256 byte
Maximum Payload Size for MPS tuning tests.

Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-30 15:09:59 -04:00
Jean-Marie Lemetayer
251a3053b1 misc: imx: remove DM dependency for ocotp driver in SPL
The ocotp driver is available for regular and SPL builds using the
(SPL_)MXC_OCOTP configuration. Also, the ocotp driver does not support
the driver model (DM) configuration.

But, for SPL builds, the SPL_MXC_OCOTP configuration depends on
SPL_MISC which implies on SPL_DM.

This commit replaces the dependency on SPL_MISC with SPL_DRIVERS_MISC.
So the only requirement is to have enabled miscellaneous drivers for
the SPL.

Signed-off-by: Jean-Marie Lemetayer <j.lemetayer@kerlink.fr>
2023-03-30 08:40:27 +02:00
Ye Li
040fc2be78 misc: sentinel: s400_api: Use new command request definitions
Remove legacy command definitions, change to use new ELE_xxx command
request.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-03-29 22:27:38 +02:00
Ye Li
76c184fe3a misc: sentinel: s400_api: Add get_events API
Add get_events API to retrieve any singular events that has occurred
since the FW has started from sentinel

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-03-29 22:27:38 +02:00
Ye Li
39f700e801 misc: fuse: Lock 8ULP ECC-protected fuse when programming
The ECC fuse on 8ULP can't be written twice. If any user did it, the
ECC value would be wrong then cause accessing problem to the fuse.
The patch will lock the ECC fuse word to avoid this problem.
For iMX9, the OTP controller automatically prevents an ECC fuse word to
be written twice. So it does not need the setting.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-03-29 20:15:42 +02:00
Ye Li
fff11619a1 misc: fuse: Update fuse mapping for 8ULP S400 API
Since new 8ULP A1 S400 FW (v0.0.8-e329b760) can support to read
more fuses: like PMU trim, Test flow/USB, GP1-5, GP8-10. Update
the u-boot driver for the new mapping.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Alice Guo <alice.guo@nxp.com>
2023-03-29 20:15:42 +02:00
Jonas Karlman
dd5684b878 rockchip: efuse: Add support for RK3036
Add support for rk3036 compatible.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28 18:07:28 +08:00
Jonas Karlman
16e8afa802 rockchip: efuse: Add support for RK3128
Add support for rk3128 compatible.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28 18:07:28 +08:00
Jonas Karlman
b0828cf989 rockchip: efuse: Add support for RK3328
Add support for rk3328 compatible.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28 18:07:28 +08:00
Jonas Karlman
6f95b3e103 rockchip: efuse: Add support for RK3288 and more
Add support for rk3066a, rk3188, rk322x and rk3288 compatible.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28 18:07:28 +08:00
Jonas Karlman
433260ac1a rockchip: efuse: Refactor to use driver data and ops
Refactor the driver to use driver data and ops to simplify handling
of SoCs that require a unique read op.

Move handling of the aligned bounce buffer to main read op in order to
keep the SoC unique read op simple.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28 18:07:28 +08:00
Jonas Karlman
9a850d1fcd rockchip: otp: Add dump_otp debug command
Add a simple debug command to dump the content of the otp.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28 18:07:28 +08:00
Jonas Karlman
f888098229 rockchip: otp: Add support for RK3588
Add support for rk3588 compatible.

Adjust offset using driver data in main read op.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28 18:07:28 +08:00
Jonas Karlman
d58d55d242 rockchip: otp: Add support for RK3568
Add support for rk3568 compatible.

Handle allocation of an aligned bounce buffer in main read op in order
to keep the SoC unique read op simple.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28 18:07:28 +08:00
Jonas Karlman
8fa1870e11 rockchip: otp: Refactor to use driver data and ops
Refactor the driver to use driver data and ops to simplify handling
of SoCs that require a unique read op.

Use readl_poll_sleep_timeout instead of a custom poll loop, and add
validation of input parameter to main read op.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-02-28 18:07:28 +08:00
Simon Glass
684787e7d7 Correct SPL use of A003399_NOR_WORKAROUND
This converts 1 usage of this option to the non-SPL form, since there is
no SPL_A003399_NOR_WORKAROUND defined in Kconfig

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-09 16:32:25 -05:00
Simon Glass
e77e64b71a misc: Drop mc9sdz60 driver
Drop this unused driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:48 -05:00
Simon Glass
26de9a745c misc: Drop ali512x
Drop this unused driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07 14:33:47 -05:00
Simon Glass
dd4bd9ad86 qemu: Add a bootdev for qfw
Add a bootdev device for qfw so that it can be used with standard boot.
This simply checks for the correct method and then does the read. Most of
the other logic is handed in a new bootmeth driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-06 13:04:53 -05:00
Tom Rini
1e1cd8eb2d Merge tag 'fsl-qoriq-2023-2-1' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
make QSPI clock selection optional during SoC init for ls102xa
Fix regulator name for ls2_sfp
Update NXP RCW github repo
2023-02-01 09:31:17 -05:00
Sean Anderson
4992d8360d misc: ls2_sfp: Fix regulator name
Unlike in Linux, -supply is not automatically appended to regulator
requests. Add it.

Fixes: 2645bc0e12 ("arm: layerscape: Add sfp driver")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-02-01 14:17:29 +08:00
Ye Li
7246ec1934 imx8: scu_api: sync sc_rm_is_pad_owned api change
SCFW has fixed a overflow issue in sc_rm_is_pad_owned API. This
requires u-boot to update API implementation, since it will cause
compatible issue. Otherwise all pad checking will have problem and
cause pad setting not continue.

Due to the compatible issue, the new u-boot only works with new
SCFW (API version: 1.21 and later).

old scfw + old u-boot: API overflow issue
old scfw + new u-boot, or new scfw + old u-boot: API compatible issue
new scfw + new u-boot: Working

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by : Jason Liu <Jason.hui.liu@nxp.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-01-31 19:44:23 +01:00
Tom Rini
6e7df1d151 global: Finish CONFIG -> CFG migration
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20 12:27:24 -05:00
Sean Anderson
0998a20cfc misc: fs_loader: Add function to get the chosen loader
The fs_loader device is used to pull in settings via the chosen node.
However, there was no library function for this, so arria10 was doing it
explicitly. This function subsumes that, and uses ofnode_get_chosen_node
instead of navigating the device tree directly. Because fs_loader pulls
its config from the environment by default, it's fine to create a device
with nothing backing it at all. Doing this allows enabling
CONFIG_FS_LOADER without needing to modify the device tree.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-01-12 14:06:15 -05:00
Tom Rini
0478dac62a kbuild: Remove uncmd_spl logic
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.

The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:13 -05:00
Tom Rini
d91365203c Convert CONFIG_SMSC_LPC47M et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SMSC_LPC47M
   CONFIG_SMSC_SIO1007

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
6c03a65275 Convert CONFIG_MXS_OCOTP to Kconfig
This converts the following to Kconfig:
   CONFIG_MXS_OCOTP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:13 -05:00
Tom Rini
060613f119 Convert CONFIG_FSL_IIM to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_IIM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:43 -05:00
Tom Rini
65cc0e2a65 global: Move remaining CONFIG_SYS_* to CFG_SYS_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00
Tom Rini
cdc5ed8f1f global: Move remaining CONFIG_SYS_NUM_* to CFG_SYS_NUM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NUM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
6cc04547cb global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Stefan Herbrechtsmeier
c0facda197 misc: usb251xb: Support 8/16 bit device tree values
The device tree binding [1] specify the vendor-id, product-id, device-id
and language-id as 16 bit values and the linux driver reads the boost-up
value as 8 bit value.

[1] https://www.kernel.org/doc/Documentation/devicetree/bindings/usb/usb251xb.txt

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2022-09-14 15:23:03 -04:00
Pali Rohár
ca514d0267 misc: atsha204a: Don't check for error when waking up the device
The device ignores any levels or transitions on the SCL pin when the device
is idle, asleep or during waking up.

Linux kernel driver for atsha204a (atmel-sha204a.ko) also ignores return
value from i2c wakeup send command, see:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/crypto/atmel-i2c.c?h=v5.19#n174

And also userspace Turris libatsha204 library ignores return value from
wakeup send command, see:
https://gitlab.nic.cz/turris/libatsha204/-/blob/v29.2/src/libatsha204/layer_ni2c.c#L75-76

U-Boot driver should do same thing.

Fixes waking up ATSHA204 on Turris 1.x boards.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
2022-08-09 10:01:31 +02:00
Tom Rini
17ead040d4 Audit <flash.h> inclusion
A large number of files include <flash.h> as it used to be how various
SPI flash related functions were found, or for other reasons entirely.
In order to migrate some further CONFIG symbols to Kconfig we need to
not include flash.h in cases where we don't have a NOR flash of some
sort enabled.  Furthermore, in cases where we are in common code and it
doesn't make sense to try and further refactor the code itself in to new
files we need to guard this inclusion.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Alice Guo
5e2612f1dc misc: fuse: update the code for accessing fuse of i.MX93
Sentinel have read access of OTP shadow register 0-511, and fsb have
read access of shadow 0-51/312-511.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Alice Guo
31b3ca5527 misc: fuse: support to access fuse on i.MX93
i.MX93 fuse can be accessed through FSB and s400-api. Add mapping tables
for i.MX93. The offset address of FSB accessing OTP shadow registers is
different between i.MX8ULP and i.MX93, so use macro to define the offset
address instead of hardcode.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Alice Guo
5d78ff733d misc: imx8ulp: move fuse.c from imx8ulp to sentinel
The i.MX93 platform wants to reuse drivers/misc/imx8ulp/fuse.c. Moving
fuse.c from the folder imx8ulp to sentinel makes it can be used by other
platforms.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Ye Li
1a55a633e0 misc: S400_API: Rename imx8ulp_s400_msg to sentinel_msg
Use more generic name for S40x msg structure

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Peng Fan
2727245638 misc: s400_api: introduce ahab_release_m33_trout
Introduce Sentinel API ahab_release_m33_trout to make sure sentinel
release M33 trout and make sure M33 could boot.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Peng Fan
625473d6ce misc: S400_API: New API for FW status and chip info
Add new API to get sentinel FW status and SoC chip info

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Ye Li
e5fcf91348 misc: S400_API: Update release RDC API
To support more RDC instances on i.MX93, update API to latest
definition.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Peng Fan
45fed324b5 misc: s4mu: Support iMX93 with Sentinel MU
Support iMX93 communicate with Sentinel

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Ye Li
03fcf96651 misc: imx: S400_API: Move S400 MU and API to a common place
Since iMX9 uses S401 which shares the API with iMX8ULP. So move S400
MU driver and API to a common place and selected by CONFIG_IMX_SENTINEL

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Marek Behún
61143f741e treewide: Fix Marek's name and change my e-mail address
Fix diacritics in some instances of my name and change my e-mail address
to kabel@kernel.org.

Add corresponding .mailmap entries.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 10:14:04 +02:00