Commit graph

245 commits

Author SHA1 Message Date
Patrice Chotard
1f0d5885db sandbox: dts: Add compatible string for bind-test node
Usage of lists_bind_fdt() in bind command imposes to add
a compatible string for bind-test node.

Others impacts are:
  - bind-test node is binded at sandbox start, so no need to bind it
    in test_bind_unbind_with_node() test.
  - As explained just above, after sandbox start, now a phy exist.
    In test/dm/phy.c, it was verified that a third phy didn't exist,
    now we must verified that a fourth phy doesn't exist.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22 07:58:39 -06:00
Michal Simek
f692b479f0 i2c: eeprom: Use reg property instead of offset and size
Remove adhoc dt binding for fixed-partition definition for i2c eeprom.
fixed-partition are using reg property instead of offset/size pair.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-20 09:49:20 +02:00
Philippe Reynes
a6c6f0f0c8 test/py: add tests for the button commands
Adds tests for the button commands.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28 19:30:39 -06:00
Philippe Reynes
bd3e4882c7 sandbox: dtsi: add buttons
Adds two buttons on sandbox so button framework may be tested.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28 19:30:39 -06:00
Philippe Reynes
037a56d6b1 sandbox, test: change hog gpio
Since commit 9ba84329dc ("sandbox, test: add test for GPIO_HOG
function"), the gpio_a 0,1,2 and 3 are used by hog in test.dts.
But 2 leds 'sandbox:red' and 'sandbox:green' are using gpio_a 0
and 1. As hog always request his gpios, the led command on both
led is broken:

=> led sandbox:red
LED 'sandbox:red' not found (err=-16)

The gpio is already requested by hog, so it can't be enabled
for led 'sandbox:red'.

This commit change the gpio used by hog to 10, 11, 12 and 13,
so the led command could be used again with 'sandbox:red' and
'sandbox:green'.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-28 19:30:39 -06:00
Dave Gerlach
21e3c219ae test: Add tests for SOC uclass
Add a sandbox SOC driver, and some tests for the SOC uclass.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Tom Rini
7208396bbf Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"
This reverts commit 5d3a21df66, reversing
changes made to 56d37f1c56.

Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 08:42:06 -04:00
Dave Gerlach
fbde39f417 test: Add tests for SOC uclass
Add a sandbox SOC driver, and some tests for the SOC uclass.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-20 11:37:47 -06:00
Simon Glass
fefac0b064 dm: acpi: Enhance acpi_get_name()
For many device types it is possible to figure out the name just by
looking at its uclass or parent. Add a function to handle this, since it
allows us to cover the vast majority of cases automatically.

However it is sometimes impossible to figure out an ACPI name for a device
just by looking at its uclass. For example a touch device may have a
vendor-specific name. Add a new "acpi,name" property to allow a custom
name to be created.

With this new feature we can drop the get_name() methods in the sandbox
I2C and SPI drivers. They were only added for testing purposes. Update the
tests to use the new values.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
01694589af acpi: Add support for DSDT generation
Some devices need to inject extra code into the Differentiated System
Descriptor Table (DSDT). Add a method to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: correct one typo in inject_dsdt() comments]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
0f7b111f70 acpi: Support ordering SSDT data by device
Add a /chosen property to control the order in which the data appears
in the SSDT. This allows matching up U-Boot's output from a dump of the
known-good data obtained from within Linux.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
b5183172f0 acpi: Add support for SSDT generation
Some devices need to generate code for the Secondary System Descriptor
Table (SSDT). Add a method to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
0667900049 acpi: Support copying properties from device tree to ACPI
Some drivers in Linux support both device tree and ACPI. U-Boot itself
uses Linux device-tree bindings for its own configuration but does not use
ACPI.

It is convenient to copy these values over to the ACPI DP table for
passing to linux. Add some convenience functions to help with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
1361a53c1a acpi: Add a function to get a device path and scope
Add a function to build up the ACPI path for a device and another for its
scope.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Tom Rini
6e7d7aa2e2 Merge branch 'next'
Merge all outstanding changes from the current next branch in now that
we have released.
2020-07-06 15:46:38 -04:00
Heiko Schocher
9ba84329dc sandbox, test: add test for GPIO_HOG function
currently gpio hog function is not tested with "ut dm gpio"
so add some basic tests for gpio hog functionality.

For this enable GPIO_HOG in sandbox_defconfig, add
in DTS some gpio hog entries, and add testcase in
"ut dm gpio" command.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-05 08:06:09 -04:00
Sean Anderson
038b13ee81 reset: Add generic reset driver
This patch adds a generic reset driver. It is designed to be useful when
one has a register in a regmap which contains bits that reset other
devices. I thought this seemed like a very generic use, so here is a
generic driver. The overall structure has been modeled on the syscon-reboot
driver.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-01 15:01:21 +08:00
Sean Anderson
4a3390f1d3 dm: Add support for simple-pm-bus
This type of bus is used in Linux to designate buses which have power
domains and/or clocks which need to be enabled before their child devices
can be used. Because power domains are automatically enabled before probing
in U-Boot, we just need to enable any clocks present.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-01 15:01:21 +08:00
Michael Walle
be1a6e9425 dm: uclass: don't assign aliased seq numbers
If there are aliases for an uclass, set the base for the "dynamically"
allocated numbers next to the highest alias.

Please note, that this might lead to holes in the sequences, depending
on the device tree. For example if there is only an alias "ethernet1",
the next device seq number would be 2.

In particular this fixes a problem with boards which are using ethernet
aliases but also might have network add-in cards like the E1000. If the
board is started with the add-in card and depending on the order of the
drivers, the E1000 might occupy the first ethernet device and mess up
all the hardware addresses, because the devices are now shifted by one.

Also adapt the test cases to the new handling and add test cases
checking the holes in the seq numbers.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Alex Marginean <alexandru.marginean@nxp.com>
Tested-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <michal.simek@xilinx.com> [on zcu102-revA]
2020-06-11 20:52:11 -06:00
Michael Walle
c03b7612ea usb: provide a device tree node to USB devices
It is possible to specify a device tree node for an USB device. This is
useful if you have a static USB setup and want to use aliases which
point to these nodes, like on the Raspberry Pi.
The nodes are matched against their hub port number, the compatible
strings are not matched for now.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11 20:52:11 -06:00
Neil Armstrong
9bf87e256c test: dm: update test for open-drain/open-source emulation in gpio-uclass
Add tests for testing open-drain/open-source emulation in gpio-uclass.
It also adds two test3-gpios configured as GPIO_ACTIVE_LOW.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-11 15:12:56 +02:00
Chunfeng Yun
00c82acfe9 test: dm: phy: add a test item for the phy_bulk API
Add a test item for the phy_bulk API

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
bf6ad91629 test: dm: add test item for ofnode_get_child_count()
Add a test item for ofnode_get_child_count()

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Simon Glass
93f7f82782 acpi: Add a method to write tables for a device
A device may want to write out ACPI tables to describe itself to Linux.
Add a method to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Patrick Delaunay
e5301bac5d test: pinmux: add pincontrol-gpio for pin configuration
Add a simple pincontrol associated to the sandbox gpio driver,
that allows to check pin configuration with the command pinmux.

The pinmux test is also updated to test behavior with 2 pincontrols.

Example to check LED pin configuration:

=> pinmux list
| Device                        | Driver                        | Parent
| pinctrl-gpio                  | sandbox_pinctrl_gpio          | root_driver
| pinctrl                       | sandbox_pinctrl               | root_driver

=> pinmux dev pinctrl-gpio

=> pinmux status

a0        : gpio input .
a1        : gpio input .
a2        : gpio input .
a3        : gpio input .
a4        : gpio input .
a5        : gpio output .
a6        : gpio output .
...

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
ff52665d03 test: dm: update test for pins configuration in gpio
Add tests for new API set_dir_flags and set_dir_flags and associated
code in gpio uclass.

Test support for new flags GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE
GPIO_PULL_UP and GPIO_PULL_DOWN.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
2c0f782e0f gpio: sandbox: cleanup binding support
Cleanup binding support, use the generic binding by default
(test u-class gpio_xlate_offs_flags function) and add
specific binding for added value.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
d15c05b5d0 test: dm: update test for pins configuration in pinctrl node
Add test for "pins" configuration in gpio uclass with set_state() ops
and test for generic parsing of pinconf_param array).

set_state() is called by:
- pinctrl_generic_set_state
 |- pinctrl_generic_set_state_subnode

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Tom Rini
f51b4bcf61 Functions for reading indexed values from device tree
Enhancements to 'dm' command
 Log test enhancements and syslog driver
 DM change to read parent ofdata before children
 Minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl6YdaMRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreYLRwf8C+vKmERVLLcrMZMMiLctbY2kVflJV8zG
 RjFwBcazZDPYjtHqClFZtJyIDYzgkVQRo+QPcdLxjcA+gjSXdteeRa0XTsBTXOZQ
 kbs7yBkL+rCIO2WyXtuyajsmDMQtqM5vYgeBdTeYnJu7NVxwRMYrUqqAKLolNpIN
 SKNYz+a8OEOG2EetbTdwwrmSpNy/cZ3wDGYK25DFTte8/vCZMRBTPiiNSrLp/RsM
 xIojRcLqzARwpvPfFZ8psASKei9+5oIICUrNvwwQGtjepvZwdFQEl90SKaHw8kMf
 sP9rxuqlEN5ec6xnMTUgwfnyBZgNIMSeb4KVPP1rxN2eAa5+bK1OlQ==
 =gyyY
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-10apr20-take2' of git://git.denx.de/u-boot-dm

Functions for reading indexed values from device tree
Enhancements to 'dm' command
Log test enhancements and syslog driver
DM change to read parent ofdata before children
Minor fixes
2020-04-16 13:45:03 -04:00
Dario Binacchi
4bb7075c83 dm: core: support reading a single indexed u32 value
The patch adds helper functions to allow reading a single indexed u32
value from a device-tree property containing multiple u32 values, that
is an array of integers.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
Dario Binacchi
70573c6c46 dm: test: add test case for dev_read_u64 function
Add test case to cover dev_read_u64 and dev_read_u64_default functions.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
Heinrich Schuchardt
1ecea74e2e sandbox: add reserved-memory node in device tree
For testing the handling of memory reservations create a reserved-memory
node in sandbox.dts and sandbox64.dts.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromum.org>
2020-04-16 08:07:58 -06:00
Tom Rini
42c64d1bc9 sandbox: Update PCI nodes in dts files
The way the PCI nodes are written today causes a number of warnings if
we stop disabling some of the warnings we pass to DTC.  As these
warnings aren't disabled in current Linux Kernel builds, we should aim
to not disable them here either, so rewrite these slightly.  Update the
driver model doc as well.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-16 08:07:57 -06:00
Simon Glass
f50cc95288 acpi: Add a simple sandbox test
Add a sandbox test for the basic ACPI functionality we have so far.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-16 14:36:28 +08:00
Tom Rini
9a8942b53d sandbox conversion to SDL2
TPM TEE driver
 Various minor sandbox video enhancements
 New driver model core utility functions
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl48iogACgkQfxc6PpAI
 reaVzAf/an3/yKe6r3CVWlcRV6H/dVg1ApnnLpX7jS0p0b++oCVvOiy7z1WPXj3k
 b1SSgENDeeZ/8EHio+Gf7ZidH/TGEj7L6YEFwd1t60GMkZiWEkNf4Z53tw482YG+
 96hoPD+ySTW+ddIdVHWAFG2I4aEiKHANJAp/ItNdD+rLbrEwNQy+eiK5JTOk80B6
 /X8AJCLZeAC1s7vs+2+WolgjT78QGzA9HHalMiublcqh0ivKKk0QeQiOKKPe8JYJ
 om5YY1TxayQ60Xmo5f39/SBfzEEklxw83sU9o1tBeYzyVUpu7fQdkxiDbWdsij77
 DgwLdeYQJGbN+hdSWE0gjTqyhW+lWA==
 =KRoA
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

sandbox conversion to SDL2
TPM TEE driver
Various minor sandbox video enhancements
New driver model core utility functions
2020-02-11 10:58:41 -05:00
Simon Glass
025543554c dm: irq: Add support for requesting interrupts
At present driver model supports the IRQ uclass but there is no way to
request a particular interrupt for a driver.

Add a mechanism, similar to clock and reset, to read the interrupts
required by a device from the device tree and to request those interrupts.

U-Boot itself does not have interrupt-driven handlers, so just provide a
means to read and clear an interrupt. This can be useful to handle
peripherals which must use an interrupt to determine when data is
available, for example.

Bring over the basic binding file as well, from Linux v5.4. Note that the
older binding is not supported in U-Boot; the newer 'special form' must be
used.

Add a simple test of the new functionality.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07 22:46:32 +08:00
Simon Glass
a466db5adb sandbox: Support changing the LCD colour depth
Add a new device-tree property to control the colour depth. At present we
support 16bpp and 32bpp.

While we are here, update the code to use livetree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05 19:33:46 -07:00
Simon Glass
bd933bfd83 dm: core: Add ofnode_get_chosen_prop()
Add a function to read a property from the chosen node, providing access
to its length. Update ofnode_get_chosen_string() to make use of it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:45 -07:00
Simon Glass
14ca9f7f5a dm: core: Rename ofnode_get_chosen_prop()
This function is actually intended to read a string rather than a
property. All of its current callers use it that way. Also there is no way
to return the length of the property from this function.

Rename it to better indicate its purpose, using ofnode_read as the prefix
since this matches most other functions.

Also add some tests which are missing for these functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:45 -07:00
Tom Rini
d6b92b9742 dm: Increased separation of ofdata_to_platdata() and probe methods
-----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl4WGTURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreaB9wf+P/DA1udn1JKSL7sGkqzXlWGtC6qTU5eY
 em6GpotS3BiJx40vvKCYc1LbVbVEwXNKvs0AcxvqTxA+9ZiNAFERjbtmxPaqFUHe
 +vBcqTkYOSOIoSkWTAK+leqVirfGQULdLhITI7sHoF+37UbsDKlSlHjHQZ4XL9Xn
 fey1eGNaT+QThJ23GTZtZJAHUzoK870+qUhkqifUdHpvnxOJ/j75/AU7zNYlJJHW
 12H3DqeoBRnQU0sPsyY/4Bm0e5+GalYMS9XCcWKxxFqPh7/NQoV7Z7yqvKsm7KXc
 2VsZk8D+3lU4486JKpfOeCcdUCfgNPSR35AQwQttzNNc9nfYJRpfxA==
 =56sP
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-8jan20' of git://git.denx.de/u-boot-dm

dm: Increased separation of ofdata_to_platdata() and probe methods
2020-01-09 08:52:21 -05:00
Simon Glass
dc12ebbbdb dm: test: Add a test driver for devres
Add a driver which does devres allocations so that we can write tests for
devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07 16:02:39 -07:00
Sughosh Ganu
ff0dada9b8 sandbox: rng: Add a random number generator(rng) driver
Add a sandbox driver for random number generation. Mostly aimed at
providing a unit test for rng uclass.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07 18:08:21 +01:00
Simon Glass
fbb0efdd27 sandbox: Add a test for IRQ
Add a simple sandbox test for this uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:12 +08:00
Simon Glass
3e17ffbb44 sandbox: Add PCI driver and test for p2sb
Add a sandbox driver and PCI-device emulator for p2sb. Also add a test
which uses a simple 'adder' driver to test the p2sb functionality.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:11 +08:00
Simon Glass
3b65ee34b9 x86: sandbox: Add a PMC emulator and test
Add a simple PMC for sandbox to permit tests to run.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:11 +08:00
Heinrich Schuchardt
15ab77c203 sandbox: add missing compatible property in device tree
In the device tree UEFI unit test the compatible property of the device is
read.

Provide the missing property.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-10 05:42:25 -07:00
Jean-Jacques Hiblot
9a52be129c test: clk: test clock self assignment
Make sure that the clock self-assignment works by having a clock of
clk-sbox be configured automatically when clk-sbox is probed.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-22 16:14:05 +02:00
Jean-Jacques Hiblot
dd2e0ce2a4 test: clk: Update tests to also check the managed API
Add a few more clocks the clk_sandbox clock provider and get them using
the managed API.
Make sure they are released when the device is removed.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-22 16:14:05 +02:00
AKASHI Takahiro
073e6d65d1 sandbox: fix cpu property in test.dts for pytest
When I tried to run some new efi tests with pytest, efi_smbios_register()
triggered a segmentation fault. Here is the location where it happened:
efi_init_obj_list()
  efi_smbios_register()
    write_smbios_table()
      smbios_write_type4()
        smbios_write_type4_dm()

where dev_get_parent_platdata() should return a pointer to struct
cpu_platdata, but it is actually NULL because any cpu device on
sandbox is attached to "root_driver."

With this patch, this issue will be fixed by moving all the definitions
of cpus under "cpus" node so that they have a "cpu_bus" parent.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15 08:40:02 -06:00
Yannick Fertré
23f965a4c6 dm: Add a dsi host uclass
Display Serial Interface (DSI) host can usefully be modelled
as their own uclass.
DSI defines a serial bus and a communication protocol
between the host and the device (panel, bridge).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:34:43 +02:00
Simon Glass
33c215af4b dm: pci: Add a function to read a PCI BAR
At present PCI address transaction is not supported so drivers must
manually read the correct BAR after reading the device tree info. The
ns16550 has a suitable implementation, so move this code into the core
DM support.

Note that there is no live-tree equivalent at present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: correct the unclear comments in test.dts]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:43 +08:00
Simon Glass
9b69ba4a78 pci: sandbox: Move the emulators into their own node
Sandbox pci works using emulation drivers which are currently children of
the pci device:

	pci-controller {
		pci@1f,0 {
			compatible = "pci-generic";
			reg = <0xf800 0 0 0 0>;
			emul@1f,0 {
				compatible = "sandbox,swap-case";
			};
		};
	};

In this case the emulation device is attached to pci device on address
f800 (device 1f, function 0) and provides the swap-case functionality.

However this is not ideal, since every device on a PCI bus has a child
device. This is only really the case for sandbox, but we want to avoid
special-case code for sandbox.

Worse, child devices cannot be probed before their parents. This forces
us to use 'find' rather than 'get' to obtain the emulator device. In fact
the emulator devices are never probed. There is code in
sandbox_pci_emul_post_probe() which tries to track when emulators are
active, but at present this does not work.

A better approach seems to be to add a separate node elsewhere in the
device tree, an 'emulation parent'. This could be given a bogus address
(such as -1) to hide the emulators away from the 'pci' command, but it
seems better to keep it at the root node to avoid such hacks.

Then we can use a phandle to point from the device to the correct
emulator, and only on sandbox. The code to find an emulator does not
interfere with normal pci operation.

Add a new UCLASS_PCI_EMUL_PARENT uclass which allows finding an emulator
given a bus, and finding a bus given an emulator. Update the existing
device trees and the code for finding an emulator.

This brings PCI emulators more into line with I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fix 3 typos in the commit message;
        encode bus number in the labels of swap_case_emul nodes;
        mention commit 4345998ae9 in sandbox_pci_get_emul()]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:41 +08:00
Simon Glass
b0e2c23d3e sandbox: pci: Increase the memory space
Increase the memory space so we can support the p2sb bus which needs
multiples of 1MB.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:41 +08:00
Simon Glass
a605b0f767 sandbox: spmi: Add ranges property for address translation
At present address translation does not work since there is no ranges
property in the spmi nodes. Add empty ranges properties and a little more
logging so that this shows the error:

   /tmp/b/sandbox/u-boot -d /tmp/b/sandbox/arch/sandbox/dts/test.dtb \
	-c "ut dm spmi_access_peripheral" -L7 -v
   ...
   pm8916_gpio_probe() bad address: returning err=-22

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:39 +08:00
Tom Rini
df9a7a195b u-boot-imx-20190719
- CCF for i.MX6
 - nandbcb command to write SPL into NAND
 - Switch to DM (i.MX28)
 - Boards: Toradex, engicam, DH
 - Fixes for i.MX8
 - Fixes for i.MX7ULP
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl0y6dgPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3iDYL/AgznVr7kSHoYpSGfBp8pH3R1UdUiQFg437+
 9/wqMJM5Txm1aK7qTW2u5I7qzIpGw0LMPZ7CDQhWJa1Z0hdNWf/1lMzCVOPvCl1v
 C0TK5hx3ufyfgpkGdkPvVXTmn0f8tdiqtS8zQOLVntPe5dIuOySS0MbD9K4Xewfm
 sVYO0p6F1q+EHbRGw33kIX3/ST8wuj7Iki0AFiZ2hAImHO7UeZP2X3k31kbhs+ZB
 /uhUit3Rn0nc5sIqiiP6Ptfjp8eq13LwWbSwJzezCQssmkTn14z6rrgwUcNuXNlh
 Vi88kJr2ObkFgwUpQCWss+sHzyJQkTX/iLz52FCWB4Ruzr6zGr/4ONLT/iDP0Ydl
 ncO3v8uqLpAeB7kdkt8JRJhq62qihdZc6mdN2YJoCYUZSlR3gxzKmXvT+drglsOi
 B78KoU/MgQ10REQ9IoTRLhQc1gwTF8LJSyfz5hjRGoMhD/Ek5WAQJaMlxDg67Ai8
 HB4lUNjkCV58HdP1+zIWJbbxrDc/lg==
 =LNOs
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190719' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20190719

- CCF for i.MX6
- nandbcb command to write SPL into NAND
- Switch to DM (i.MX28)
- Boards: Toradex, engicam, DH
- Fixes for i.MX8
- Fixes for i.MX7ULP

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-27 09:35:05 -04:00
Tom Rini
ff8c23e784 - add rtc driver for stm32mp1
- add remoteproc driver for stm32mp1
 - use kernel qspi compatible string for stm32
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdNrGIAAoJEOKyvdngqpN1SVQH+gKENb24GRDN0VReylxbAB+v
 eEIN51GdnmwV2nxDAcpswUF9Vsf4rE5ZNO4qFDubvFEIltMknE6VBi1ywSqQKI4P
 Ft8xHX/xvTJ8hppVrCf0/nWCcULBesknbFncTlyey0AHUoqamKdQknp5wV7eC6sI
 IqpLV09i1Ftswc7XhYLpCsYpfmv15iGtZnvVtUAN1c/ArM9T1ZrApXrnJ/R3+/Xc
 ih0LMJr2tfEOHBEn03WcB9bMKmEqytQEv70nVcZ15ORw7Wh1vL+Lu5EGNv5HazF3
 AY/PnQ2P+J2v2OgrKjhEl7sUGDVBcanqchiaJzdnjYqy3uGXaJngNAV7hMqpsV4=
 =C8bt
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190723' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- add rtc driver for stm32mp1
- add remoteproc driver for stm32mp1
- use kernel qspi compatible string for stm32
2019-07-23 14:16:21 -04:00
Fabien Dessenne
641067fb0c dm: core: Introduce xxx_translate_dma_address()
Add the following functions to translate DMA address to CPU address:
- dev_translate_dma_address()
- ofnode_translate_dma_address()
- of_translate_dma_address()
- fdt_translate_dma_address()
These functions work the same way as xxx_translate_address(), with the
difference that the translation relies on the "dma-ranges" property
instead of the "ranges" property.

Add related test. Test report:
=> ut dm fdt_translation
Test: dm_test_fdt_translation: test-fdt.c
Test: dm_test_fdt_translation: test-fdt.c (flat tree)
Failures: 0

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-22 09:21:28 +02:00
Lukasz Majewski
87e460c304 clk: sandbox: Add sandbox test code for Common Clock Framework [CCF]
This patch provides code to implement the CCF clock tree in sandbox. It
uses all the introduced primitives; some generic ones are reused, some
sandbox specific were developed.

In that way (after introducing the real CCF tree in sandbox) the recently
added to clk-uclass.c: clk_get_by_id() and clk_get_parent_rate() are tested
in their natural work environment.

Usage (sandbox_defconfig and sandbox_flattree_defconfig):
./u-boot --fdt arch/sandbox/dts/test.dtb --command "ut dm clk_ccf"

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19 14:50:30 +02:00
Lukasz Majewski
4ab8e783f3 dts: sandbox: Add 'osc' clock for Common Clock Framework [CCF] testing
This patch adds the 'osc' fixed clock to facilitate the CCF testing in
the sandbox U-Boot. It is a starting point for building CCF hierarchy of
clocks.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19 14:50:30 +02:00
Alex Marginean
c3d9f3f899 test: dm: add a test for MDIO MUX DM uclass
Adds a test using a makeshift MDIO MUX.  The test is based on the existing
MDIO test.  It uses the last emulated PHY register to verify MUX selection.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-18 16:37:13 -05:00
Alex Marginean
ec9594a50f test: dm: add MDIO test
A very simple test for DM_MDIO, mimicks a register write/read through the
sandbox bus to a dummy PHY.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15 13:32:25 -05:00
Tom Rini
a9758ece08 - Sandbox improvements including .dts refactor
- Minor tracing and PCI improvements
 - Various other minor fixes
 - Conversion of patman, dtoc and binman to support Python 3
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl0nbDoRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZcBQgAn+ojgq/hD89bihuhz2oEe6rhzHB9OkcC
 sHrVL8Jbmby/BuzISGe4oeeM5yVygBVtUiN/72JiiAHLmykqc4CpRjNvgOOAgKCy
 Ml8UyiBNNVNfrD6f9PxAKvPZf6S0gfLnomGOQ/psdEojpY5AvQxQ36D+QFZ0AMP5
 67/xjSfN9bNPw8UbgE/VhJ+WFbU948BP2EBt6+NBAtv7HW4AX9vT0famJfWEjwq8
 ftmcFOSNGgYcDQ5BwQWX1sFhnwb9XSfurlQsVYBsFA4cx4gj0DfUm1Ugr4wDD+lo
 91P+76hSBQ+mHp1HJ90WMd2vAaElG7/SoaicXo9pW6Rc7WIgTjk7gg==
 =SdZy
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-9jul19-take2' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

- Sandbox improvements including .dts refactor
- Minor tracing and PCI improvements
- Various other minor fixes
- Conversion of patman, dtoc and binman to support Python 3
2019-07-11 18:10:11 -04:00
Ramon Fried
bb41333782 pci_ep: add pci endpoint sandbox driver
Add a dummy PCI endpoint for sandbox.
Supporting only a single function, it allows setting
and reading header configuration.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-11 10:05:15 -04:00
Alex Marginean
21ebbafde8 test: dm: Add a test for PCI Enhanced Allocation
This test is built on top of the existing swap_case driver.  It adds EA
capability structure support to swap_case and uses that to map BARs.
BAR1 works as it used to, swapping upper/lower case.  BARs 2,4 map to a
couple of magic values.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-10 16:52:58 -06:00
Patrick Delaunay
099ed45c6c test: check u-boot properties in SPL device tree
Add a test to check the management of the U-boot relocation properties
for device tree SPL generation (fdtgrep result) and platdata:
- 'dm-pre-proper' and 'dm-tpl' not included in SPL
- 'dm-pre-reloc' and 'dm-spl' included in SPL

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-10 16:52:58 -06:00
Simon Glass
24c2776ba9 sandbox: Correct spi flash operation
Since the SPI nor conversion, 'sf probe' does not work on sandbox. Fix
this by using the expected compatible string in the flash node.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: cd35365762 (mtd: sf_probe: remove spi-flash compatible)
2019-07-10 16:52:58 -06:00
Simon Glass
e676f4397c sandbox: Add a memory {} node
Add a memory node which indicates the size of sandbox memory.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-10 16:52:58 -06:00
Simon Glass
87dac6b074 sandbox: Add an alias for SPI
At present 'sf probe' does not work since it cannot find SPI bus 0. Add
an alias to correct this, now that we no-longer have the --spi_sf option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-10 16:52:58 -06:00
Simon Glass
dc8c91abb7 sandbox: Create a common sandbox DT
At present sandbox and sandbox64 have duplicated nodes. This is hard to
maintain since changes in one need to be manually added to the other.

Create a common file to solve this problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-10 16:52:58 -06:00
Simon Glass
e8726da226 sandbox: Sync up sandbox64.dts with main DT
Various nodes have been added and adjusted with sandbox. Move these
changes over to sandbox64.dts to keep these in sync.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-10 16:52:58 -06:00
Jean-Jacques Hiblot
07e33711fe dm: Add a No-op uclass
This uclass is intended for devices that do not need any features from the
uclass, including binding children.
This will typically be used by devices that are used to bind child devices
but do not use dm_scan_fdt_dev() to do it. That is for example the case of
several USB wrappers that have 2 child devices (1 for device and 1 for
host) but bind only one at a any given time.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-05 14:19:41 +02:00
Tom Rini
216800acf1 Merge branch 'master' of git://git.denx.de/u-boot-spi
Conflicts:
	arch/arm/dts/armada-385-amc.dts
	arch/arm/dts/armada-xp-theadorable.dts
	arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-14 00:03:06 -04:00
Neil Armstrong
ffd4c7c2ec dts: switch spi-flash to jedec, spi-nor compatible
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot
dts files. This compatible has been added in sf_probe, let use it.

This patch switches to jedec,spi-nor when spi-flash is used in the DTS
and DTSI files, and removed spi-flash when jedec,spi-nor is already
present.

The x86 dts are switched in a separate commit since it depends on a change
in fdtdec.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-04-12 10:54:27 +05:30
Patrick Delaunay
a442e61e24 syscon: update syscon_regmap_lookup_by_phandle
Change the function syscon_regmap_lookup_by_phandle()
introduced by commit 6c3af1f24e ("syscon: dm: Add a
new method to get a regmap from DTS") to have
Linux-compatible syscon API.

Same modification than commit e151a1c288 ("syscon: add
Linux-compatible syscon API") solves issue when the node
identified by the phandle has several compatibles and is
already bound to a dedicated driver.

See Linux commit bdb0066df96e ("mfd: syscon: Decouple syscon
interface from platform devices").

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-11 20:10:05 -06:00
Anup Patel
b630d57d0a clk: Add fixed-factor clock driver
This patch adds fixed-factor clock driver which derives clock
rate by dividing (div) and multiplying (mult) fixed factors
to a parent clock.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-27 09:12:33 +08:00
Simon Glass
ecc7973d1c sandbox: sound: Silence sound for testing
When testing the sound system we don't need the hear the beeps. The
testing works by checking the data that would be emitted. Add a
device-tree property to silence the sound, and enable it for testing.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:27:09 +08:00
Simon Glass
b45c833c71 sandbox: pch: Add a test for the PCH uclass
This uclass currently has no tests. Add a sandbox driver and some simple
tests to provide basic coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: Use "sandbox,pch" for the compatible string, for consistency]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20 15:26:36 +08:00
Tom Rini
aac0c29d4b Fix recent changes to serial API for driver model
Buildman clang support and a few fixes
 Small fixes to 'dm tree' and regmap test
 Improve sandbox build compatibility
 A few other minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlw+AlIACgkQfxc6PpAI
 reYchAf+L/P5JsLoCKAY84v11eWQkCS44idAYStD8Q023dyuyNC/W6G3qEQVGkHu
 SXBzNrZ5wSJanN5I3h3ktJ7yfMOYIvSO2qLHphxDstPaZbCY4Zac6NywHrHxQpA9
 fbSilQRbcVWrPo5rsjjZhXmMdQRZVOmGD6CYZj1AihWAiHfYth7f6laNWNTWQA8C
 z+aoiF70t/PbvwFbgdzzYOjoGdXI9XML0xTqdLWRlsBKjf3z54pCV6LmN2xrsrDZ
 k7lr+x7ajJUFhivxzjowf4aOjhDB+/+I3sr+hJ5vkMM0Kqg14bbEU+xJRGpDc18K
 QPvVHT5JGe/nq1cZXuCqzrYxTrrA7A==
 =w9ln
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-15jan19' of git://git.denx.de/u-boot-dm

Fix recent changes to serial API for driver model
Buildman clang support and a few fixes
Small fixes to 'dm tree' and regmap test
Improve sandbox build compatibility
A few other minor fixes
2019-01-15 22:05:34 -05:00
Heinrich Schuchardt
d0a30a8ae2 sandbox: i2c_emul_find() No emulators for device 'rtc@43'
when running the date command on sandbox_defconfig an error occurs:

    ./u-boot -D u-boot.dtb

    => date
    i2c_emul_find() No emulators for device 'rtc@43'
    ## Get date failed

Correct the references to the emulator devices in the sandbox device trees
using test.dts as a reference.

Fixes: 031a650e13 ("dm: sandbox: i2c: Use new emulator parent uclass")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Dropped unnecessary #address/size-cells property in i2c_emul:
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-01-14 17:47:13 -07:00
Philipp Tomsich
6f2d59cb7f test: bootcount: add bootcount-uclass test
Add a test for the bootcount uclass, which uses the RTC bootcount backend
(i.e. drivers/bootcount/rtc.c is implictly also tested).

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-14 17:41:23 -05:00
Simon Glass
282e29eb47 dm: sandbox: sound: Convert to use driver model
Update sandbox's device tree and config to use driver model for sound. Use
the double buffer for sound output so that we don't need to wait for the
sound to complete before returning.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:36:30 -07:00
Simon Glass
a1b17e4f4c dm: core: Add a function to read into a unsigned int
The current dev_read...() functions use s32 and u32 which are convenient
for device tree but not so useful for normal code, which often wants to
use normal integers for values.

Add a helper which supports returning an unsigned int. Also add signed
versions of the unsigned readers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
d490189865 dm: sound: Create a uclass for sound
The sound driver pulls together the audio codec and i2s drivers in order
to actually make sounds. It supports setup() and play() methods. The
sound_find_codec_i2s() function allows locating the linked codec and i2s
devices. They can be referred to from uclass-private data.

Add a uclass and a test for sound.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
e96fa6c911 dm: sound: Create a uclass for i2s
The i2s bus is commonly used with audio codecs. It provides a way to
stream digital data sychronously in both directions. U-Boot only supports
audio output, so this uclass is very simple, with a single tx_data()
method.

Add a uclass and a test for i2s.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
ce6d99a056 dm: sound: Create a uclass for audio codecs
An audio codec provides a way to convert digital data to sound and vice
versa. Add a simple uclass which just supports setting the parameters for
the codec.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Tom Rini
48d299a799 Merge branch 'master' of git://git.denx.de/u-boot-usb
- DWC3 and UDC cleanup
2018-12-10 07:15:12 -05:00
Jean-Jacques Hiblot
6c3af1f24e syscon: dm: Add a new method to get a regmap from DTS
syscon_regmap_lookup_by_phandle() can be used to get the regmap of a syscon
device from a reference in the DTS. It operates similarly to the linux
version of the namesake function.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-07 16:31:45 +01:00
Grygorii Strashko
b330991874 test: dma: add dma-uclass test
Add a sandbox DMA driver implementation (provider) and corresponding DM
test.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-07 08:13:45 -05:00
Benjamin Gaignard
7f84fc670b dm: Add Hardware Spinlock class
This is uclass for Hardware Spinlocks.
It implements two mandatory operations: lock and unlock
and one optional relax operation.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06 23:26:32 -05:00
Álvaro Fernández Rojas
7959882049 dm: core: add functions to get/remap I/O addresses by name
This functions allow us to get and remap I/O addresses by name, which is useful when there are multiple reg addresses indexed by reg-names property.
This is needed in bmips dma/eth patch series, but can also be used on many
other drivers.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05 06:06:44 -07:00
Simon Glass
031a650e13 dm: sandbox: i2c: Use new emulator parent uclass
Update the device tree, sandbox i2c driver and tests to use the new
emulation parent to hold emulators.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-29 09:30:05 -07:00
Simon Glass
4a5b5e1a46 sandbox: Update some drivers to work in SPL/TPL
At present sandbox drivers are mostly not used before relocation. Some of
these are needed by Chromium OS verified boot, since it uses sandbox TPL,
so update them accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20 19:14:22 -07:00
Patrice Chotard
f41a824b23 test/py: test pinmux command
Add pinmux test which test the following commands:
  - pinmux list
  - pinmux dev
  - pinmux status

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Mark some tests as sandbox-centric]
Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-16 16:51:57 -05:00
Bin Meng
25d0fe743d cpu: sandbox: Add "u-boot, dm-pre-reloc" for all cpu nodes
To support CONFIG_DISPLAY_CPUINFO, add "u-boot,dm-pre-reloc" for
all cpu nodes in Sandbox test.dts.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2018-11-14 09:16:28 -08:00
Bin Meng
4f89d4947c test: dm: virtio: Add test cases for virtio uclass
Now that we have a sandbox virtio transport driver, add some test
cases to test virtio uclass driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:28 -08:00
Mario Six
82744c20e6 test: regmap: Increase size of syscon0 memory
The upcoming changes to the regmap interface will contain a proper check
for plausibility when reading/writing from/to a register map. To still
have the current tests pass, increase the size of the memory region for
the syscon0 device, since one of the tests reads and writes beyond this
range.

Reviewed-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-11-14 09:16:27 -08:00
Bin Meng
2786cd740e test: dm: core: Add a test case for driver marked with DM_FLAG_PRE_RELOC flag
Now that we fixed the pre-relocation driver binding for driver marked
with DM_FLAG_PRE_RELOC flag, add a test case to cover that scenario.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:27 -08:00
Marek Vasut
b59349a0c0 test: Add PCI device entry without compat string and with DT node
Add PCI entry without compatible string and with a DT node only with
reg = <...> property into the DT. This is needed for the tests to
verify whether such a setup creates an U-Boot PCI device with the
DT node associated with it in udevice.node.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-20 15:23:38 -04:00
Simon Glass
5d9a88f44a test: panel: Add a test for the panel uclass
At present this uclass has no tests. Add a simple one which checks the PWM
configuration, regulator and GPIO.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:27 -06:00
Simon Glass
e6c5c94a79 dm: core: Update ofnode to read binman-style flash entry
At present ofnode_read_fmap_entry() reads a flash map entry in a format
which is not supported by binman. To allow use to use binman-format
descriptions, update this function.

Also add a simple test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:27 -06:00