Commit graph

1506 commits

Author SHA1 Message Date
Wolfgang Denk
445093d175 Fix "par[t]ition" typo.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-21 22:05:05 +02:00
York Sun
bcb6c2bb84 Enabled support for Rev 1.3 SPD for DDR2 DIMMs
SPD has minor change from Rev 1.2 to 1.3. This patch enables Rev 1.3.
The difference has ben examined and the code is compatible.
Speed bins is not verified on hardware for CL7 at this moment.

This patch also enables SPD Rev 1.x where x is up to "F". According to SPD
spec, the lower nibble is optionally used to determine which additinal bytes
or attribute bits have been defined. Software can safely use defaults. However,
the upper nibble should always be checked.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-12 04:54:30 -05:00
Serge Ziryukin
65d342541e cmd_usb.c: show cmd usage if no args given
Signed-off-by: Serge Ziryukin <ftrvxmtrx@gmail.com>
2010-05-06 23:35:34 +02:00
Larry Johnson
54fa2c5b51 Move test for unnecessary memmove to memmove_wd()
Signed-off-by: Larry Johnson <lrj@acm.org>
2010-05-06 00:38:06 +02:00
Trübenbach, Ralf
39f7aacf3f command.c: Enable auto tab for the editenv command
Enable the auto completion (with TAB) of the environment variable name
after the editenv command.

Signed-off-by: Ralf Trbenbach <ralf.truebenbach@men.de>
2010-05-06 00:37:50 +02:00
Graeme Russ
bf16500f79 x86: Use CONFIG_SERIAL_MULTI
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-06 00:16:46 +02:00
Frans Meulenbroeks
8cd852824d cmd_onenand.c: moved to standard subcommand handling
On the fly also fixed the following things:
- write help talked about a parameter oob, but that one was not used, so
  removed it from the help message.
- the test command also allowed a force subcommand but didn't use it.
  eliminated the code.
- do_onenand made static
- do_onenand contained
	int blocksize;
	...
	mtd = &onenand_mtd;
	this = mtd->priv;
	blocksize = (1 << this->erase_shift);
  As blocksize was not used the last two statements were unneeded so
  removed them.
  The first statement (mtd = ....) assigns to a global. Not sure if it
  is needed, and since I could not test this, left the line for now

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-05-05 23:57:17 +02:00
Wolfgang Denk
900a1fe8c8 Merge branch 'master' of git://git.denx.de/u-boot-arm 2010-05-04 22:49:15 +02:00
Minkyu Kang
46a3b5c8df SAMSUNG: serial: modify name from s5pc1xx to s5p
Because of other s5p series SoC will use these serial functions,
modify function's name and structure's name.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-04-30 05:23:23 -05:00
Wolfgang Denk
e1d2950d0f mtdparts: get rid of custom DEBUG macro, use debug()
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-04-28 10:58:10 +02:00
Wolfgang Denk
2697eff1af mtdparts: fix write through NULL pointer
The "mtdparts add" command wrote through a NULL pointer - on many
systems this went unnoticed (PowerPC has writable RAM there, some ARM
systems have ROM where a write has no effect), but on arm1136
(i.MX31) it crashed the system.

Add appropriate checks.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-04-28 10:53:47 +02:00
Anatolij Gustschin
e3b28e6732 mpc512x: add multi serial PSC support
Extend mpc512x serial driver to support multiple PSC ports.

Subsequent patches for PDM360NG board support make use of this
functionality by defining CONFIG_SERIAL_MULTI in the board config
file. Additionally the used PSC devices are specified by defining
e.g. CONFIG_SYS_PSC1, CONFIG_SYS_PSC4 and CONFIG_SYS_PSC6.

Support for PSC devices other than 1, 3, 4 and 6 is not added
by this patch because these aren't used currently. In the future
it can be easily added using DECLARE_PSC_SERIAL_FUNCTIONS(N) and
INIT_PSC_SERIAL_STRUCTURE(N) macros in cpu/mpc512x/serial.c.
Additionally you have to add code for registering added
devices in serial_initialize() in common/serial.c.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24 22:56:30 +02:00
Stefan Roese
a47a12becf Move arch/ppc to arch/powerpc
As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>
2010-04-21 23:42:38 +02:00
Jens Scharsig
30dc165a76 FIX: watchdog timeout, while waiting for input
* add WATCHDOG_RESET to !tstc() loops
* prevents watchdog timeout, while waiting for input,
  if CONFIG_BOOT_RETRY_TIME or CONFIG_SHOW_ACTIVITY defined

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-04-10 23:31:31 +02:00
karl.beldan@gmail.com
ae30b8c200 malloc: sbrk() should return MORECORE_FAILURE instead of NULL on failure
Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
2010-04-10 00:30:27 +02:00
Frans Meulenbroeks
9acd4f0e91 cmd_bmp.c: add standard subcommand handling
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2010-04-09 23:37:06 +02:00
Wolfgang Denk
74b86d2d51 Merge branch 'master' of git://git.denx.de/u-boot-ubi 2010-04-09 21:49:42 +02:00
Peter Tyser
3b653fdb32 cmd_ubi: Fix uninitialized variable warning
gcc 3.4.6 previously reported the following error on many MIPS boards
which utilize UBI:
  cmd_ubi.c:193: warning: 'vol' might be used uninitialized in this function

The current code is structured such that 'vol' will never be used when
it is NULL anyway, but gcc isn't smart enough to figure this out.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-04-09 16:30:29 +02:00
Kim B. Heino
fac71cc49f USB storage probe
While debugging one ill behaving USB device I found two bugs in USB
storage probe.

usb_stor_get_info() returns -1 (error), 0 (skip) or 1 (ok). First part
of this patch fixes error case.

Second part fixes usb_inquiry()'s retry counter handling. Original code
had retry = -1 on error case, not retry = 0 as checked in the next line.

Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
2010-04-08 21:40:00 +02:00
Kim B. Heino
aaad108b88 USB storage count
Here's another USB storage patch. Currently U-Boot handles storage
devices #0 - #4 as valid devices, even if there is none connected. This
patch fixes usb_stor_get_dev() to check detected device count instead
of MAX-define.

This is very important for ill behaving devices. usb_dev_desc[] can be
partially initialized if device probe fails.

After fixing get_dev() it was easy to fix "usb part" etc commands.
Previously it outputed "Unknown partition table" five times, now it's
"no USB devices available".

Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
2010-04-08 21:40:00 +02:00
Kumar Gala
49b97d9c8e fdt: Add fdt_del_node_and_alias helper
Add a helper function that given an alias will delete both the node
the alias points to and the alias itself

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2010-04-07 00:08:18 -05:00
Wolfgang Denk
ffa37fc98d Merge branch 'next' 2010-04-01 11:28:32 +02:00
Heiko Schocher
24de2f4be0 bootm, linux: fix booting Multi-File Image with "kernel+ramdisk+fdt"
Booting a "Multi-File Image" including a linux kernel, ramdisk and
fdt, generated with

mkimage -A ppc \
    -O linux \
    -T multi \
    -C gzip \
    -a 00000000 \
    -e 00000000 \
    -n "kernel-2.6+initrd+dtb" \
    -d "vmlinux.bin.gz:ramdisk_image.gz:board.dtb" \
    multi.bin

actually fails, because ramdisk start and end addresses
didn;t get initialized. This patch fixes this issue.

Tested on the KUP4K board.

Signed-off-by: Heiko Schocher <hs@denx.de>
2010-03-29 14:31:42 +02:00
Frans Meulenbroeks
fd03ea8964 i2c: made unused function i2c_mux_add_device static
and removed it from the .h file

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-29 13:29:12 +02:00
Frans Meulenbroeks
2c0dc99020 cmd_i2c: introduced get_alen helper function
The code to parse alen appeared 6 times in the function.
Factored this out in a small helper function

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-29 13:28:57 +02:00
Frans Meulenbroeks
a266fe955a cmd_i2c: moved a define to before the functions
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-29 13:28:49 +02:00
Frans Meulenbroeks
4a8cf3382a cmd_i2c: moved mispositioned comment for i2c md
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-29 13:28:40 +02:00
Frans Meulenbroeks
3a6dcb988e cmd_i2c.c: declared local functions as static
Declared all functions that were not called outside the file as static

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-29 13:25:43 +02:00
Wolfgang Denk
0020db3f0d Merge remote branch 'origin/master' into next 2010-03-29 12:33:43 +02:00
Wolfgang Denk
060f28532b cmd_usb.c: print debug messages only when DEBUG is defined
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-28 00:19:45 +01:00
Wolfgang Denk
be1a91320c Merge branch 'next' of git://git.denx.de/u-boot-coldfire into next 2010-03-28 00:04:18 +01:00
Philippe De Muyter
116095eb1f fix cmd_bdinfo.c:354: warning: 'print_eth' defined but not used
This fixes the following warnings when running MAKEALL for coldfire :
cmd_bdinfo.c:354: warning: 'print_eth' defined but not used

Signed-off-by: Philippe De Muyter <phdm at macqel.be>
2010-03-24 11:08:53 -05:00
Alessandro Rubini
acb1386893 lcd: make 16bpp work
Support for 16bpp was supposed to be in the code but was not working.
This makes it work and has been tested in the nhk8815 board.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-03-24 11:23:15 +01:00
Florian Fainelli
6b94b49622 cmd_nand: show nand scrub confirmation character
When issuing a nand scrub command, the entered character is not displayed
this may be confusing. This patch makes the input character being
displayed if it is a 'y' so that an user knows he is about to scrub his
nand.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2010-03-23 14:29:10 -05:00
Wolfgang Denk
b46b353b90 Merge remote branch 'origin/master' into next 2010-03-21 22:45:36 +01:00
Anatolij Gustschin
3c950e2ebf fdt_support: add partitions fixup in mtd node
Allow overwriting defined partitions in the device tree blob
using partition info defined in the 'mtdparts' environment
variable.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Gerald Van Baren <vanbaren@cideas.com>
2010-03-21 22:44:59 +01:00
John Schmoller
d611295032 cmd history: Match history buffer size to console buffer
Match history buffer size to console buffer size. History buffer size
was hard coded to 256, artificially limiting the command buffer size.
The history buffer now tracks CONFIG_SYS_CBSIZE.

Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
2010-03-21 22:44:59 +01:00
John Schmoller
6475b9f91b console: Fix console buffer overrun
When CONFIG_SYS_CBSIZE equals MAX_CMDBUF_SIZE, a command string of
maximum length will overwrite part of the history buffer, causing the
board to die. Expand the console_buffer and hist_lines buffer by one
character each to hold the missing NULL char.

Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
2010-03-21 22:44:58 +01:00
Frans Meulenbroeks
47ab5ad145 cmd_setexpr: allow memory addresses in expressions
This patch add functionality to use memory addresses in expressions.
This increases the power of expressions substantially

It adheres to the standard convemtions: memory addresses can be given
in the format *address (e.g. *1000)

Rationale for this change is that it allows masking off bits from a
byte that is obtained by reading data from e.g. i2c.

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

Fix warning: control reaches end of non-void function
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-21 22:44:43 +01:00
Frans Meulenbroeks
652e53546b cmd_i2c.c: added i2c read to memory function
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-21 22:44:43 +01:00
Frans Meulenbroeks
fb0070e910 cmd_i2c.c: sorted commands alphabetically
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-21 22:44:43 +01:00
Frans Meulenbroeks
bfc3b77ebe cmd_i2c.c: reworked subcommand handling
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-21 22:44:43 +01:00
Frans Meulenbroeks
f74d9bd2a2 cmd_bootm.c: made subcommand array static
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-21 22:44:43 +01:00
Frans Meulenbroeks
faffe14f01 cmd_i2c.c: reduced subaddress length to 3 bytes
according to some of the comments the subaddress length is 1 or 2, but we are being
prepared for the case it becomes 3. However the code also accepted 4.
This repairs this by changing the constand 4 to 3.

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-21 22:44:42 +01:00
Anatolij Gustschin
a74908161a console.c: fix problem with splashimage
If a board uses cfb_console driver and splash image
and also defines CONFIG_SILENT_CONSOLE, the user is
locked out even if "silent" is not set. It is not
possible to get any output, neither on vga console
device nor on serial console after redirecting the
output to the serial console, since the GD_FLG_SILENT
flag remains set.

Fix the problem by redirecting the output from frame
buffer to serial console if splashimage is used.
Only suppress the output if "silent" environment
variable was set and don't set the GD_FLG_SILENT
flag arbitrarily.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-03-21 22:22:53 +01:00
Frans Meulenbroeks
9d90a93d36 cmd_mmc remove \n
This patch removes the \n after the help message for mmcinfo.
This resulted in an empty line being displayed after the mmcinfo line
when the help command was given.

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-21 16:44:04 +01:00
Wolfgang Denk
93910edb59 Prepare v2010.03-rc1
Coding style cleanup, update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-12 23:06:04 +01:00
Michael Zaidman
5f8419597f Cosmetic change - indentation correction.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
2010-03-12 00:19:11 +01:00
Anatolij Gustschin
a693447cea cmd_mtdparts.c: prevent printbuffer overflows
The length of configured MTDPARTS_DEFAULT string
could be greater than console printbuffer size.
Replace printf() by puts() to avoid potential buffer
overflows.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-03-12 00:18:08 +01:00
Wolfgang Denk
143cd21fe2 Move CONFIG_UPDATE_TFTP code after CONFIG_PREBOOT
The auto-update feature (CONFIG_UPDATE_TFTP) requires that the env
variable serverip be set for the TFTP access. If DHCP is to be used
to get the serverip env variable, this doesn't work as DHCP happens
after the auto-update attempt has run. A solution is to run DHCP in
PREBOOT, but even this is too late.

To solve this, we move update_tftp() below the PREBOOT stuff.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-11 23:56:03 +01:00
Richard Retanubun
4b99327a41 PPC: Record U-Boot's relocated address in RAM and show in bdinfo.
This patch uses gd->relocaddr variable to store uboot's relocated
address in RAM and shows it in bdinfo command.

This patch moves CONFIG_AMIGAONEG3SE style copying of the address
in board_init_f to just before relocation is actually done.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Tested-by: Detlev Zundel <dzu@denx.de>
2010-03-11 23:49:16 +01:00
Frans Meulenbroeks
f3651764e5 cmd_itest.c: fix pointer dereferencing
fix pointer dereferencing
if the size is .b and .w an 8 or 16 bit access is done.

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2010-02-24 00:09:45 +01:00
Stefan Roese
ab5a0dcb9c net: Use 0.5 sec timeout in miiphy_reset() instead of counting loop
This patch fixes a problem I've notived on a buggy PPC4xx system. This
system has problems with the PHY MDIO communication and seemed to be
stuck/crashed in miiphy_reset(). But degugging revealed, that the CPU
didn't crash, but "only" hung in this counting loop for about 2 minutes.

This patch now uses a real timeout of 0.5 seconds (as mentioned in the
comment in miiphy_reset).

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-02-06 22:52:21 -08:00
Remy Bohmer
84d36b3018 USB: usb_control_msg wait for driver ISR to set status.
This patch changes usb_control_msg back to the state prior to commit
4886720844.

The USB driver ISR routine may update the status.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2010-02-03 22:06:59 +01:00
Wolfgang Denk
5c1a1a3069 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2010-02-03 20:05:27 +01:00
Wolfgang Denk
0ae016f1ff Merge branch 'master' of git://git.denx.de/u-boot-video 2010-02-03 20:03:46 +01:00
Wolfgang Denk
5f566f4547 cmd_ximg.c: fix error: 'i' undeclared
Fix compile error:

	cmd_ximg.c: In function 'do_imgextract':
	cmd_ximg.c:234: error: 'i' undeclared (first use in this function)
	cmd_ximg.c:234: error: (Each undeclared identifier is reported only once
	cmd_ximg.c:234: error: for each function it appears in.)

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-01-31 21:51:43 +01:00
Anatolij Gustschin
a6e42ed097 lcd: remove CONFIG_ATMEL_LCD ifdefs from lcd_setfgcolor
Not all boards defining LCD_COLOR16 are able to set
lcd_color_fg/lcd_color_bg correctly. The issue seems to
be caused by CONFIG_ATMEL_LCD ifdefs in lcd_setfgcolor()
and lcd_setbgcolor(). Actually, the color values passed
to these functions are already correct, we don't need
to fix them. So remove ifdefs here.

Reported-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-01-27 21:23:30 +01:00
Wolfgang Denk
15b86c3d6c env_nand.c: print error message and fail gracefully
env_nand.c would crash silently if a malloc() for the environment
buffers failed; make it print an error message and fail gracefully,
i. e. use the default environment then.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: John Rigby <jcrigby@gmail.com>
2010-01-27 14:22:41 -06:00
Kumar Gala
4194b3668a Add support to disable cpu's in multicore processors
Add a disable sub-command to the cpu command that allows for disabling
cores in multicore processors.  This can be useful for systems that are
using multicore chips but aren't utilizing all the cores as a way to
reduce power and possibly improve performance.

Also updated an added missing copyright.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-26 23:17:49 -06:00
Wolfgang Wegner
5912d36507 add ability to handle compressed images to imxtract
imxtract currently can not handle compressed images. This patch adds
handling for bzip2 and zip compression. In both cases, a destination
address has to be specified for extraction.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
2010-01-26 19:36:07 +01:00
Mike Frysinger
2903ad33a7 jffs2: fix hangs/crashs when not using CONFIG_JFFS2_PART_SIZE
Commit b5b004ad8a caused the sector_size to
be calculated incorrectly when the part size was not hardcoded.  This is
because the new code relied on part->size but tried to do the calculation
before it was initialized properly, and it did not take into consideration
the magic SIZE_REMAINING define.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-26 00:07:50 +01:00
Mike Frysinger
44431cabbb gzip/zlib: make features optional
If you really want to slim down U-Boot and you would rather use a higher
compression scheme (like LZMA), it'd be nice to disable gzip/zlib since
these code bases take up a significant amount of space.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-26 00:04:57 +01:00
Stefano Babic
8edcde5e4e mkimage: Add Freescale imx Boot Image support (imximage)
This patch adds support for "imximage" (MX Boot Image)
to the mkimage utility. The imximage is used on the Freescales's
MX.25, MX.35 and MX.51 processors.

Further details under doc/README.imximage.

This patch was tested on a Freescale mx51evk board.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-01-25 23:58:29 +01:00
Mike Frysinger
a16028da63 lmb: only force on arches that use it
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-21 22:26:00 +01:00
Heiko Schocher
88ffb2665c CRAMFS: support cramfs in RAM
cramfsls and cramfsload are added to the command list.
A cramfs placed at 'cramfs_addr' can the be listed with 'cramfsls' and files
can be loaded with 'cramfsload'. 'cramfs_addr' is an environment variable
specifying the address the cramfs is located.
This works for powerpc and for ARM.

Use CONFIG_CMD_CRAMFS.

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
2010-01-18 00:44:13 +01:00
Heiko Schocher
1567b596d9 env, eeprom: add redundant environment support
Add redundant environment support for environment lying on a EEPROM.

Tested on uppcoming suen3 support

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
2010-01-18 00:43:16 +01:00
Heiko Schocher
548738b4d4 cmd_eeprom: I2C updates
- CONFIG_ENV_EEPROM_IS_ON_I2C
  define this, if you have I2C and SPI activated, and your
  EEPROM, which holds the environment, is on the I2C bus.

- CONFIG_I2C_ENV_EEPROM_BUS
  if you have an Environment on an EEPROM reached over
  I2C muxes, you can now define, how to reach this
  EEPROM.

Signed-off-by: Heiko Schocher <hs@denx.de>
2010-01-18 00:42:37 +01:00
Detlev Zundel
c3d7eec6d8 cmd_bootm.c: Change interpretation of standalone image parameters.
Current code uses the second argument to bootm for standalone images to
override the load address specified in the image instead of passing all
parameters as is to the application.  This behaviour is not documented
and not in line with how the go command works for standalone applications,
so we simply drop it.

Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-01-18 00:26:36 +01:00
Detlev Zundel
8b828a8f44 cmd_bootm.c: Do not load a ramdisk when not booting a kernel.
In case we boot an image marked as 'standalone' and 'linux', the current
code erroneously tried to load a ramdisk.

Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-01-18 00:26:34 +01:00
Robin Getz
16035bcd8c kgdb: update mem2hex/hex2mem funcs
Convert the funcs to do the conversion inline so that we can do the copy
all at once with memcpy.  This let's us push out an weird arch-specific
issue with accessing different regions of memory to the memcpy function
like the MMRs on Blackfin systems, and it should be a bit faster.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-18 00:24:21 +01:00
Robin Getz
0c909551f8 kgdb: add default generic stubs
The default kgdb functions can be implemented with common U-Boot functions,
so rather than force everyone to copy & paste these things, create a set of
weak stubs.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-18 00:23:00 +01:00
Mike Frysinger
10c32ff59f config_defaults.h: new header for common u-boot config defaults
There are a bunch of features in U-Boot that we want to enable by default,
and it's best if we centralize them in one place rather than updating all
the board files out there.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-18 00:04:42 +01:00
Wolfgang Denk
2740544881 malloc: return NULL if not initialized yet
When malloc() was called before it was properly initialized
(as would happen if when used before relocation to RAM) it returned
random, non-NULL values, which called all kinds of difficult to debug
subsequent errors.

Make sure to return NULL when initialization was not done yet.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-01-15 13:26:20 +01:00
Sanjeev Premi
b821cead7d onenand: Fix compile errors due to FlexOneNAND
This patch fixes the compile error while trying to
compile for omap3evm.

env_onenand.c: In function 'env_relocate_spec':
env_onenand.c:70: error: 'CONFIG_ENV_ADDR_FLEX' undeclared
 (first use in this function)
env_onenand.c:70: error: (Each undeclared identifier is re
ported only once
env_onenand.c:70: error: for each function it appears in.)
env_onenand.c: In function 'saveenv':
env_onenand.c:106: error: 'CONFIG_ENV_ADDR_FLEX' undeclare
d (first use in this function)
env_onenand.c:107: error: 'CONFIG_ENV_SIZE_FLEX' undeclare
d (first use in this function)

Signed-off-by: Sanjeev Premi <premi@ti.com>
Acked-by: Tom Rix <Tom.Rix@windriver.com>
2010-01-06 16:28:00 -06:00
Wolfgang Wegner
87d93a1ba2 move prototypes for gunzip() and zunzip() to common.h
Prototype for gunzip/zunzip was only in lib_generic/gunzip.c and thus
repeated in every file using it. This patch moves the prototypes to
common.h and removes all prototypes distributed anywhere else.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
2009-12-21 21:39:59 +01:00
Mahavir Jain
127e10842b usb: write command for RAW partition.
This patch implements write support to usb device with raw partition.
It will be useful for filesystem write support to usb device from
u-boot in future.

Tested with writing kernel image to raw usb disk & booting with usb
read command into ram.

[Note:  run usb part to get info about start sector & number of
sectors on a partition for usb write operation.]

Signed-off-by: Mahavir Jain <mjain@marvell.com>
2009-12-20 12:53:00 +01:00
Tom Rix
8f8bd565f3 USB Consolidate descriptor definitions
The header files usb.h and usbdescriptors.h have the same nameed
structure definitions for

usb_config_descriptor
usb_interface_descriptor
usb_endpoint_descriptor
usb_device_descriptor
usb_string_descriptor

These are out right duplicates in usb.h

usb_device_descriptor
usb_string_descriptor

This one has extra unused elements

usb_endpoint_descriptor

	unsigned char	bRefresh
	unsigned char	bSynchAddress;

These in usb.h have extra elements at the end of the usb 2.0
specified descriptor and are used.

usb_config_descriptor
usb_interface_descriptor

The change is to consolidate the definition of the descriptors
to usbdescriptors.h.  The dublicates in usb.h are removed.
The extra element structure will have their name shorted by
removing the '_descriptor' suffix.

So

usb_config_descriptor -> usb_config
usb_interface_descriptor -> usb_interface

For these, the common descriptor elements are accessed now
by an element 'desc'.

As an example

-	if (iface->bInterfaceClass != USB_CLASS_HUB)
+	if (iface->desc.bInterfaceClass != USB_CLASS_HUB)

This has been compile tested on MAKEALL arm, ppc and mips.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20 12:47:37 +01:00
Heiko Schocher
4b142febff common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-08 22:14:07 +01:00
Wolfgang Denk
35e3717772 Merge branch 'master' of ../work into next 2009-12-07 23:42:33 +01:00
Heiko Schocher
df002fa6b9 i2c: fix dangling comment in do_i2c_mw()
commit bd3784df94 deleted some unused
code in do_i2c_mw(), but missed to also remove the respective
commment. This patch fixes this.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-12-07 22:58:46 +01:00
Wolfgang Denk
206c00f26f Merge branch 'master' into next
Conflicts:
	lib_generic/zlib.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-07 22:47:17 +01:00
Peter Tyser
224c90d106 bootm: Fix help message's sub-command ordering
The help message for the 'bootm' command listed the 'cmdline' and 'bdt'
sub-commands in the wrong order which resulted in the error below when
following the 'help' command's instructions:

  "Trying to execute a command out of order"

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-12-07 22:12:49 +01:00
Wolfgang Denk
2a49bf3149 Merge branch 'master' into next
Conflicts:
	board/esd/plu405/plu405.c
	drivers/rtc/ftrtc010.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-05 02:11:59 +01:00
Peter Korsgaard
20dde48bca add lzop decompression support
Add lzop decompression support to the existing lzo bitstream handling
(think gzip versus zlib), and support it for uImage decompression if
CONFIG_LZO is enabled.

Lzop doesn't compress as good as gzip (~10% worse), but decompression
is very fast (~0.7s faster here on a slow ppc). The lzop decompression
code is based on Albin Tonnerre's recent ARM Linux lzo support patch.

Cc: albin.tonnerre@free-electrons.com
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-12-05 01:30:23 +01:00
Graeme Russ
b4feeb4e8a i386: Fix malloc initialization
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-12-05 01:02:10 +01:00
Robert P. J. Day
bcb324d68f Remove superfluous preprocessor tests from some cmd_*.c files.
A small number of common/cmd_*.c files contain preprocessor tests that
are apparently superfluous since those same tests are used in the
Makefile to control the compilation of those files.  Those tests are
clearly redundant as long as they surround the entirety of the source
in those files.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2009-12-02 23:46:45 +01:00
Pratap Chandu
bd3784df94 Removes dead code in the file common/cmd_i2c.c
There is some dead code enclosed by #if 0 .... #endif in the file
common/cmd_i2c.c
This patch removes the dead code.

Signed-off-by: Pratap Chandu <pratap.rrke@gmail.com>
2009-12-02 23:35:24 +01:00
Magnus Lilja
d52e3e0176 cmd_date: Fix spelling in error message.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2009-12-02 23:28:10 +01:00
Peter Tyser
c253122395 Move do_irqinfo() to common/cmd_irq.c
cmd_irq.c is a much better home and it is already conditionally
compiled based on CONFIG_CMD_IRQ.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-12-02 23:23:20 +01:00
Peter Tyser
a5dd4dc64f cmd_license: Remove unneeded #ifdef CONFIG_CMD_LICENSE
cmd_license is already conditionally compiled at the Makefile-level.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-12-02 23:22:26 +01:00
Peter Tyser
9ef78511cd circbuf: Move to lib_generic and conditionally compile
circbuf could be used as a generic library and is only currently
needed when CONFIG_USB_TTY is defined.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-12-02 23:19:32 +01:00
Mike Frysinger
bf44f3f327 exports: rewrite jump table init
The current jump table init fails to initialize a bunch of exported
symbols (forceenv/do_reset/etc...).  Rather than fix just these few
missing pieces, rewrite the code to utilize the existing list of
exported symbols -- _exports.h.  Since every exported symbol has to
be listed in this header, it makes sense to use it so that we only
ever have one list that needs to be updated and things can't fall
out of sync again.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-02 22:53:51 +01:00
Mike Frysinger
0008555f4d bootm: mark local boot_os[] table static
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-24 23:40:03 +01:00
Remy Bohmer
b25e38fc36 Repair build fail in case CONFIG_PPC=n and CONFIG_FIT=y
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-11-24 22:40:20 +01:00
Peter Tyser
396fd17338 Add 'true' and 'false' commands
These commands are only enabled when the hush shell is enabled and can
be useful in scripts such as:

while true do
    echo "Booting OS...";
    run $bootcmd;
    echo "Booting OS failed";
    sleep 10;
done

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-11-23 00:06:13 +01:00
Peter Tyser
4e1ca93b6b cmd_help: General cleanup
Shorten the overly-verbose help message of 'help' and clean up some
redundant ifdefery while we're at it.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-11-23 00:06:12 +01:00
Peter Tyser
6b8f5ad10f command.c: Break commands out to appropriate cmd_*.c files
command.c should contain common code related to commands, not
miscellaneous command implementations.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-11-23 00:06:11 +01:00
Amul Kumar Saha
c758e947aa ENV Variable support for Flex-OneNAND
Define and use CONFIG_ENV_ADDR_FLEX and CONFIG_ENV_SIZE_FLEX
for storing environment variables.

Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com>
Signed-off-by: Amul Kumar Saha <amul.saha@samsung.com>
2009-11-13 16:56:18 -06:00
Peter Tyser
581d04f14d cmd_nand: Move conditional compilation to Makefile
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-11-13 16:56:14 -06:00
Peter Tyser
9574fd63a9 cmd_nand: Remove duplicate include
Also remove vague, unnecessary comment

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-11-13 16:56:13 -06:00
Peter Tyser
246c69225c Add 'editenv' command
The editenv command can be used to edit an environment variable.
Editing an environment variable is useful when one wants to tweak an
existing variable, for example fix a typo or change the baudrate in the
'bootargs' environment variable.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-27 20:58:25 +01:00
Peter Tyser
b0fa8e5063 setenv(): Delete 0-length environment variables
Previously setenv() would only delete an environment variable if it
was passed a NULL string pointer as a value.  It should also delete an
environment variable when it encounters a valid string pointer of
0-length.

This change/fix is generally useful and is necessary for the upcoming
"editenv" command.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-27 20:58:25 +01:00
Peter Tyser
ecc5500ee4 readline(): Add ability to modify a string buffer
If the 'buf' parameter is a non-0-length string, its contents will be
edited.  Previously, the initial contents of 'buf' were ignored and the
user entered its contents from scratch.

This change is necessary to support the upcoming "editenv" command but
could also be used for future commands which require a user to modify
an existing string.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-27 20:58:25 +01:00
Peter Tyser
f923943843 cread_line(): Remove unused variables
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-27 20:58:25 +01:00
Peter Tyser
e491a71e57 Check for NULL prompt in readline_into_buffer()
Previously, passing readline() or readline_into_buffer() a NULL 'prompt'
parameter would result in puts() printing garbage when
CONFIG_CMDLINE_EDITING was enabled.

Note that no board currently triggers this bug.  Enabling
CONFIG_CMDLINE_EDITING on some boards (eg bab7xx) would result in
the bug appearing.  This change is only intended to prevent someone
from running into this issue in the future.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-27 20:58:25 +01:00
Wolfgang Denk
98cecb610f Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2009-10-27 20:56:31 +01:00
Wolfgang Denk
a747a7f310 Revert "env: only build env_embedded and envcrc when needed"
Breaks building on many boards, and no really clean fix available yet.

This reverts commit 6dab6add2d.
2009-10-27 20:46:31 +01:00
Anton Vorontsov
3e303f748c fdt_support: Add multi-serial support for stdout fixup
Currently fdt_fixup_stdout() is using hard-coded CONFIG_CONS_INDEX
constant. With multi-serial support, the CONS_INDEX may no longer
represent actual console, so we should try to extract port number
from the current stdio device name instead of always hard-coding the
constant value.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-26 21:35:50 -05:00
Mike Frysinger
4166ee58d3 sf: add GPL-2 license info
Some of the new spi flash files were missing explicit license lines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-10-24 22:44:18 +02:00
Kumar Gala
d535a49300 fdt: Fix fdt padding issue for initrd mem_rsv
Its possible that we end up with a device tree that happens to be a
particular size that after we call fdt_resize() we don't have any
space left for the initrd mem_rsv.

Fix this be adding a second mem_rsv into the size calculation.  We
had one to cover the fdt itself and we have the potential of adding
a second for the initrd.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2009-10-24 22:39:51 +02:00
Wolfgang Denk
922754cc82 Merge branch 'master-sync' of git://git.denx.de/u-boot-arm 2009-10-24 22:26:09 +02:00
Stefan Roese
30d45c0d3e fdt: Add fdt_fixup_nor_flash_size() to fixup NOR FLASH size in dtb
This function can be used to update the size in the "reg" property
of the NOR FLASH device nodes. This is necessary for boards with
non-fixed NOR FLASH sizes.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Acked-by: Wolfgang Denk <wd@denx.de>
2009-10-23 15:55:23 +02:00
Alessandro Rubini
8c0a92c8f4 lcd: remove '#if 0' 32-bit scroll, now memcpy does it
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
2009-10-18 23:10:43 +02:00
Alessandro Rubini
9c5586aa19 setenv: do console redirection even if previously unset
If "stdout" is not previously set, doing "setenv stdout lcd" had no
effect, since console redirection only worked if the environment
variable was already set; the second time you run setenv it worked.
Most default environments lack stdin/out/err definitions, so I'm sure
I'm not alone with this problem.

This patch simply moves a block of code out of a conditional, to do
the same work even if the variable was previously unset.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
2009-10-18 23:07:03 +02:00
Paul Gortmaker
87b22b7787 mem_mtest: fix error reporting, allow escape with ^C
The basic memtest function tries to watch for ^C after each
pattern pass as an escape mechanism, but if things are horribly
wrong, we'll be stuck in an inner loop flooding the console with
error messages and never check for ^C.  To make matters worse,
if the user waits for all the error messages to complete, we
then incorrectly report the test passed without errors.

Adding a check for ^C after any error is printed will give
the end user an escape mechanism from a console flood without
slowing down the overall test speed on a slow processor.

Also, the more extensive memtest quit after just a single error,
which is inconsistent with the normal memtest, and not useful if
if you are doing dynamic environmental impact testing, such as
heating/cooling etc.

Both tests now track the error count and report it properly
at test completion.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2009-10-18 22:57:06 +02:00
Mike Frysinger
6dab6add2d env: only build env_embedded and envcrc when needed
The env code is protected by the ENV_IS_EMBEDDED define, so attempting to
compile the code when this isn't defined is pointless.  Now that the env
headers have unified around CONFIG_ENV_IS_EMBEDDED, convert the build
system to only build the env objects when this is enabled.  And now that
the env code is conditionally compiled, we can drop the source code checks.

For people who want to extract the environment manually, add a new option
CONFIG_BUILD_ENVCRC that only enables the envcrc utility.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-18 22:53:18 +02:00
Niklaus Giger
7936b51165 Cleanup: use constant
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2009-10-18 22:41:33 +02:00
Minkyu Kang
dd2c9e6a3b s5pc1xx: support serial driver
This patch includes the serial driver for s5pc1xx.
s5pc1xx uart driver needs own register setting and clock configuration.
So, need to special driver.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2009-10-13 21:13:55 -05:00
Wolfgang Denk
cd77dd109c Merge branch 'reloc' 2009-10-09 00:03:18 +02:00
Niklaus Giger
78d2a64137 ppc4xx: Rework cmd reginfo
The command "reginfo" got an overhaul for the ppc4xx. It dumps all the
relevant HW configuration registers (address, symbolic name, content).
This allows to easily detect errors in *.h files and changes in the HW
configuration.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-10-07 09:15:26 +02:00
Peter Tyser
0630535e2d arm/microblaze/nios/nios2/sh: Remove relocation fixups
These architectures don't need relocation fixups, so reduce their
codesize a bit by defining CONFIG_RELOC_FIXUP_WORKS.

Also remove the reloc_off field from their global data structures
as it is no longer needed.

Note that the location of the standalone application jump table pointer
in the global data structure is affected by this change, breaking
execution of standalone applications compiled for previous versions of
U-Boot. We will therefore increment XF_VERSION in the next commit,
which also touches this area.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-10-03 10:17:57 +02:00
Peter Tyser
521af04d85 Conditionally perform common relocation fixups
Add #ifdefs where necessary to not perform relocation fixups.  This
allows boards/architectures which support relocation to trim a decent
chunk of code.

Note that this patch doesn't add #ifdefs to architecture-specific code
which does not support relocation.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-03 10:17:57 +02:00
Wolfgang Denk
9ae7ae6b4d Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2009-09-30 23:26:59 +02:00
Stefan Roese
95b602bab5 ppc4xx: Convert PPC4xx SDRAM defines from lower case to upper case
The latest PPC4xx register cleanup patch missed some SDRAM defines.
This patch now changes lower case UIC defines to upper case. Also
some names are changed to match the naming in the IBM/AMCC users
manuals (e.g. mem_mcopt1 -> SDRAM0_CFG).

Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-28 10:45:54 +02:00
Stefan Roese
952e7760bf ppc4xx: Convert PPC4xx UIC defines from lower case to upper case
The latest PPC4xx register cleanup patch missed the UIC defines.
This patch now changes lower case UIC defines to upper case.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-28 10:45:42 +02:00
Ken MacLeod
6e748ea004 cmd_fdt.c: fix parse of byte streams and strings
Commit 4abd844d8e extended the fdt command parser to handle property
strings which are split across multiple arguments but it was broken for
byte streams and strings.

Byte stream parsing:

 * Fixes where it would terminate early or go into an endless loop.

 * Fixes a 0x00 being inserted into the data if there is a space after
   '[' or a separate argument.

 * Fixes dereferencing the argument pointer after the last argument.

 * Checks for bad characters.

String parsing:

 * Treat multiple arguments as a string list.  This fixes an issue where
   only the last argument was stored.

Signed-off-by: Ken MacLeod <ken@bitsko.slc.ut.us>
2009-09-24 21:57:30 -04:00
Heiko Schocher
3887c3fbdb mucmc52, uc101: delete ata@3a00 node, if no CF card is detected
U-Boot can detect if an IDE device is present or not.
If not, and this new config option is activated, U-Boot
removes the ATA node from the DTS before booting Linux,
so the Linux IDE driver does not probe the device and
crash. This is needed for buggy hardware (uc101) where
no pull down resistor is connected to the signal IDE5V_DD7.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-09-25 01:22:13 +02:00
Peter Tyser
3202d33169 Remove deprecated 'autoscr' command/variables
The more standard 'source' command provides identical functionality to
the autoscr command.

Environment variable names/values on the MVBC_P, MVBML7, kmeter1,
mgcoge, and km8xx boards are updated to no longer refernce 'autoscr'.

The 'autoscript' and 'autoscript_uname' environment variables are
also removed.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Acked-by: Heiko Schocher <hs@denx.de>
2009-09-22 23:03:24 +02:00
Stefan Roese
d1c3b27525 ppc4xx: Big cleanup of PPC4xx defines
This patch cleans up multiple issues of the 4xx register (mostly
DCR, SDR, CPR, etc) definitions:

- Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
- Change the defines to better match the names from the
  user's manuals (e.g. cprpllc -> CPR0_PLLC)
- Removal of some unused defines

Please test this patch intensive on your PPC4xx platform. Even though
I tried not to break anything and tested successfully on multiple
4xx AMCC platforms, testing on custom platforms is recommended.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-11 10:35:58 +02:00
Prafulla Wadaskar
aa0c7a86cd mkimage: Add Kirkwood Boot Image support (kwbimage)
This patch adds support for "kwbimage" (Kirkwood Boot Image)
image types to the mkimage code.

For details refer to docs/README.kwbimage

This patch is tested with Sheevaplug board

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Ron Lee <ron@debian.org>

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-09-10 22:58:48 +02:00
Prafulla Wadaskar
b029dddc9a mkimage: Make table_entry code global
- make get_table_entry_id() global
- make get_table_entry_name() global
- move struct table_entry to image.h

Currently this code is used by image.c only.

This patch makes this API global so it can be used by other parts of
code, too.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Ron Lee <ron.debian.org>

Edit comments and commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-10 22:58:48 +02:00
Prafulla Wadaskar
f666dea8ab mkimage: Make genimg_print_size() global
Currently it is used by image.c only, but the the function can be
used to support additional mkimage types like for example kwbimage,
so make this function globally visible.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-10 22:58:48 +02:00
Wolfgang Denk
3a2003f61e tools/mkimage: fix compiler warnings, use "const"
This fixes some compiler warnings:
tools/default_image.c:141: warning: initialization from incompatible pointer type
tools/fit_image.c:202: warning: initialization from incompatible pointer type
and changes to code to use "const" attributes in a few places where
it's appropriate.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-10 22:58:48 +02:00
Wolfgang Denk
37daa77f3c cmd_mtdparts.c: fix compiler warning in debug code
Fix warning messages:
cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long
unsigned int', but argument 6 has type 'u32'
cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long
unsigned int', but argument 7 has type 'u32'

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-09-04 22:58:57 +02:00
Kumar Gala
3dfad40a04 Add ability for arch code to make changes before we boot
Added a arch_preboot_os() function that cpu specific code can implement to
allow for various modifications to the state of the machine right before
we boot.  This can be useful to setup register state to a specific
configuration.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-04 22:11:23 +02:00
Peter Tyser
d4e8ada0f6 Consolidate arch-specific mem_malloc_init() implementations
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-04 21:47:07 +02:00
Peter Tyser
5e93bd1c9a Consolidate arch-specific sbrk() implementations
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-09-04 21:45:39 +02:00
Wolfgang Denk
3aa8b68d80 Merge branch 'next' of ../next 2009-08-31 22:21:47 +02:00
David Brownell
52f6c34c85 bugfix CONFIG_SYS_CONSOLE_INFO_QUIET
The "console: unify printing current devices" patch goofed:
CONFIG_SYS_CONSOLE_INFO_QUIET is supposed to *REMOVE* boot
time noise, not add it.  Said patch changed the #ifndefs
to #ifdef; this one restores them to the proper sense.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-08-30 21:00:21 +02:00
Poonam Aggrwal
0e870980a6 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
The number of CPUs are getting detected dynamically by checking the
processor SVR value.  Also removed CONFIG_NUM_CPUS references from all
the platforms with 85xx/86xx processors.

This can help to use the same u-boot image across the platforms.

Also revamped and corrected few Freescale Copyright messages.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Robin Getz
02c9aa1d41 Add md5sum and sha1 commands...
Now that we have sha1 and md5 in lib_generic, allow people to use
them on the command line, for checking downloaded files.

Signed-off-by: Robin Getz <rgetz@analog.com>
2009-08-25 12:57:54 +02:00
Kumar Gala
cfd700be9f fdt: Fix fdt_pci_dma_ranges handling of 64-bit ranges
If the size of a region equal to 4G it can't be represnted in a 32-bit
BAR so we should have marked that case as MEM64.

Additionally bump the number of inbound windows up to 4 to handle the
fact that Freescale PPCs that have an implicit window for CCSRBAR.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-09 23:13:56 +02:00
Peter Tyser
197324d7d9 hush: Fix bogus free() call
An off-by-one error in hush.c resulted in an unintentional free() call
every time a command was executed

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-08-09 23:02:42 +02:00
Mike Frysinger
18304f7675 env: kill off default_environment_size
The only environment type that uses this variable is spi flash, and that is
only because it is reimplementing the common set_default_env() function.
So fix the spi flash code and kill off the default_environment_size in the
process.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-08-09 22:41:42 +02:00
Mike Frysinger
bedd8403f7 export SPI functions to standalone apps
While we're here, fix the broken #ifdef handling in _exports.h.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-08-09 22:34:51 +02:00
Wolfgang Denk
cb32ed1fc2 Merge branch 'next' of git://git.denx.de/u-boot-coldfire 2009-08-04 21:54:11 +02:00
Wolfgang Denk
4b7511478b Fix ext2load return code
Make the ext2load command return 0 on success (instead of the file
length).

Also fix output format (get rid of random newlines) and some coding
style issues (long lines etc.).

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-28 22:38:53 +02:00
Niklaus Giger
3c972849f2 Less verbose output when loading vxworks 6.x images
Loading vxWorks 5.x images resulted just into 3 or 4 lines of output.
With vxWorks 6.x and the new GCC it emits about 30 lines, which is
far too noisy in my opinion.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
2009-07-27 00:15:53 +02:00
Kyungmin Park
4828779238 Fix compiler warnings after loff_t change
Now 'env_addr' type is loff_t so use correct field type.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2009-07-27 00:08:50 +02:00