Commit graph

6246 commits

Author SHA1 Message Date
Kumar Gala
bac6a1d1fa 85xx: Remove setting of *cache-line-size in device trees
ePAPR says if the *cache-block-size is the same as *cache-line-size
than we don't need the *cache-line-size property.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-07 10:28:59 -05:00
Stefan Roese
8fd4166c46 ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
Depending on the configuration jumper "SATA SELECT", U-Boot disabled
either one PCIe node or the SATA node in the device tree blob. This
patch removes the unnecessary and even confusing warning, when the node
is not found at all.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-22 23:17:31 +02:00
Remy Bohmer
6e24a1eb14 Add missing device types to dev_print() in part.c
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2008-09-22 23:10:37 +02:00
Wolfgang Denk
5fdc215f0b Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
eventually leads to a machine check. This change assures that DPRAM
is allocated only once in that case.

Signed-off-by: Gary Jennejohn <garyj@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-22 22:23:06 +02:00
Laurent Pinchart
a07faf7b9a Fix Spartan-3 definitions.
A few Spartan-3 definitions erroneously use Spartan-3E size
constants. This patch fixes them.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
2008-09-22 22:07:20 +02:00
Laurent Pinchart
28113e1f0d Remove duplicate Spartan-3E definition.
Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-22 22:03:33 +02:00
Anatolij Gustschin
5c65ecf7cd socrates: change default mtest address range
Running mtest command on socrates without specifying
an address range crashes the board. This patch changes
default mtest address range to prevent this behavior.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-09-22 21:49:19 +02:00
Anatolij Gustschin
d666b2d596 socrates: fix crash after relocation
Currently U-Boot crashes after relocation to RAM.
Changing the CPO value of the DDR SDRAM TIMING_CFG_2
register to READ_LAT + 1 (to the value it was before
conversion of socrates to new DDR code) fixes the
problem.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-09-22 21:48:07 +02:00
Anatolij Gustschin
562788b0a3 socrates: fix SPD EEPROM address
Commit be0bd8234b
changed SPD EEPROM address to 0x51 and DDR SDRAM
detection stopped working. Change this address
back to 0x50.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-09-22 21:46:56 +02:00
Wolfgang Denk
3a9a000d9f Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2008-09-21 22:36:23 +02:00
Nobuhiro Iwamatsu
b5d10a1352 sh: Fix compile warning
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-19 11:05:22 +09:00
Nobuhiro Iwamatsu
4a065abf92 sh: Add support watchdog for SH4A core
Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
And fix some compile warning.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-19 11:05:22 +09:00
Nobuhiro Iwamatsu
a03c09c5fd sh: Fix typo in SH serial driver
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-19 11:05:22 +09:00
Nobuhiro Iwamatsu
6b44a43921 sh: Add support any page size and empty_zero_page to SH Linux uImage
Old U-Boot supported 4KB page size only. If this version, Linux
kernel can not get command line from U-Boot.
SH Linux kernel can change page size and empty_zero_page.
This patch support this function and fix promlem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-19 11:05:22 +09:00
Nobuhiro Iwamatsu
ce9f99ddb5 sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
Add function of smc911x, pkt_data_pull and pkt_data_push.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-09-19 11:05:22 +09:00
Wolfgang Denk
dd820b03a2 ADS5121: fix typo in "rootpath" default setting
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-18 13:57:32 +02:00
Wolfgang Denk
87b4ef560c Coding style cleanup; update CHANEGLOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-17 10:17:55 +02:00
Peter Tyser
ce47eb402c Support for multiple SGMII/TBI interfaces for TSEC ethernet
Fix TBI PHY accesses to use the proper offset in CPU register space. The
previous code would incorrectly access the TBI PHY by reading/writing to CPU
register space at the same location as would be used to access external PHYs.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2008-09-16 11:32:45 -05:00
Wolfgang Denk
7c803be2eb TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
After switching to using the CFI flash driver, the correct remapping
of the flash banks was forgotten.

Also, some boards were not adapted, and the old legacy flash driver
was not removed yet.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-16 18:02:19 +02:00
Wolfgang Denk
c0d2f87d6c Prepare v2008.10-rc2
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-14 00:59:35 +02:00
Wolfgang Denk
f12e4549b6 Coding style cleanup, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-13 02:23:05 +02:00
Peter Tyser
0c32565f53 Update mailing list email and archive addresses
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-09-13 02:12:41 +02:00
u-boot@bugs.denx.de
fb661ea444 85xx: socrates: autoprobe Lime chip
This patch is an attempt to implement autoprobing for the Lime
presence on the bus.
Configure GPCM for Lime CS2 and try to access chip ID registers.
Second read atempt delivers register values if the chip is present.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-09-13 02:07:39 +02:00
u-boot@bugs.denx.de
e99b607a5e 85xx: socrates: Add support for new image format.
Signed-off-by: Detlev Zundel <dzu@denx.de>
2008-09-13 02:05:37 +02:00
Nobuhiro Iwamatsu
3c094b652d sh: Fix compile error for r2dplus
netdev.h was not include by r2dplus.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
2008-09-13 02:04:15 +02:00
Heiko Schocher
56844a22b7 powerpc: Fix bootm to boot up again with a Ramdisk
Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
and this stopped Linux from booting with a Ramdisk. This patch fixes
this, by deleting the useless dummy mem reservation.

When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
added to of_size, so we dont need anymore a dummy mem reservation.

I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
system (=0x44 bytes) and rounded it up to 0x80).

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-13 02:03:38 +02:00
Luigi 'Comio' Mantellini
fc9c1727b5 Add support for LZMA uncompression algorithm.
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-13 01:59:07 +02:00
Wolfgang Denk
508eb85db7 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2008-09-13 01:45:56 +02:00
Anton Vorontsov
0008b6d968 fsl_elbc_nand: ecclayout cleanups
This patch deletes oobavail assignments, they're calculated by the nand
core code in nand_scan_tail, plus current oobavail values are wrong for
the LP NANDs.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-09-12 14:58:33 -05:00
Anton Vorontsov
8f42bf1c39 fsl_elbc_nand: implement support for flash-based BBT
This patch implements support for flash-based BBT for chips working
through ELBC NAND controller, so that NAND core will not have to re-scan
for bad blocks on every boot.

Because ELBC controller may provide HW-generated ECCs we should adjust
bbt pattern and bbt version positions in the OOB free area.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-09-12 14:57:20 -05:00
Anton Vorontsov
97ae023648 fsl_elbc_nand: fix OOB workability for large page NAND chips
For large page chips, nand_bbt is looking into OOB area, and checking
for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
reserved for bbt means.

But ELBC driver is specifying ecclayout so that oobfree area starts at
offset 1, so only one byte left for the bbt purposes.

This causes problems with any OOB users, namely JFFS2: after first mount
JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:

  OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

And on the next boot, NAND core will rescan for bad blocks, then will
see "0xff 0x19" pattern, and will mark all blocks as bad ones.

To fix the issue we should implement our own bad block pattern: just one
byte at OOB start. Though, this will work only for x8 chips. For x16
chips two bytes must be checked. Since ELBC driver does not support x16
NANDs (yet), we're safe for now.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-09-12 14:56:03 -05:00
Wolfgang Denk
225f0eaa74 Merge branch 'master' of /home/wd/git/u-boot/custodians 2008-09-12 16:14:28 +02:00
Wolfgang Denk
afbc526336 Merge branch 'Makefile-next' of git://git.denx.de/u-boot-arm 2008-09-12 16:13:12 +02:00
Wolfgang Denk
6b8be3e58e Merge branch 'master' of /home/wd/git/u-boot/custodians 2008-09-12 15:24:54 +02:00
Wolfgang Denk
b476b03256 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2008-09-12 15:23:20 +02:00
Wolfgang Denk
7238ada313 MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-12 13:52:21 +02:00
Stefan Roese
b18410e508 ppc4xx: Enable device tree (FDT) support in zeus board port
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12 07:12:39 +02:00
Stefan Roese
7bf5ecfa50 ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
This patch fixes a problem introdiced with patch
bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
initdram()].

The boards affected are:
- PCI405
- PPChameleonEVB
- quad100hd
- taihu
- zeus

Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12 07:12:33 +02:00
Ricardo Ribalda Delgado
61737c59a3 ppc4xx: Add .gitignore file to xilinx-ppc440 boards
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12 07:11:48 +02:00
Ricardo Ribalda Delgado
2bec498ed1 ppc4xx: Fix compilation of v5fx30teval_flash
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12 07:10:31 +02:00
Ricardo Ribalda Delgado
4bed9deebb ppc4xx: Fix in-tree build for ppc440-generic boards
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12 07:08:08 +02:00
Jean-Christophe PLAGNIOL-VILLARD
06c4ab50f5 ARM: synchronize mach-types.h with linux 2.6.27-rc6
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-12 02:20:47 +02:00
Jens Scharsig
3ee9f03f58 at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
This patch prevents linker error on AT91RM9200 boards, if
CONFIG_CMD_I2_TREE is set.
It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.

Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
2008-09-12 02:20:47 +02:00
Hugo Villeneuve
b5b0344957 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
2008-09-12 02:20:47 +02:00
Shinya Kuribayashi
03db53335c make: Remove redundant __ARM__ addition when cross-compiling on *BSD
__ARM__ is given by arm_config.mk automatically.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-09-12 02:20:46 +02:00
Claudio Scordino
8cc62a7d9c Fix MACH_TYPE for the AT91RM9200DK board.
Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
2008-09-12 02:20:46 +02:00
Andrew Dyer
274737e5eb i.mx change get_timer(base) to return time since base
This patch changes get_timer() for i.MX to return the time since
'base' instead of the time since the counter was at zero.

Symptom seen is flash timeout errors when erasing or programming a
sector using the common cfi flash code.

Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
2008-09-12 02:20:46 +02:00
Andrew Dyer
48fed40575 i.MX use u-boot baud rate and don't assume UART master clock
1) Change the i.MX serial driver to use the baud rate set in the
 u-boot environment

2) don't assume a 16MHz value for PERCLK1 in baud rate calculations

3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
 one to clear" like other status bits in the reg.)

Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
2008-09-12 02:20:46 +02:00
Andrew Dyer
6e1551a870 arm920t fix constant error in start.S
Code in cpu/arm920t/start.S will die with a compilation error if
CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
the ARM sub instruction.  Change the code so that each is subtracted
independently to avoid the error.

Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
2008-09-12 02:20:46 +02:00
Gururaja Hebbar K R
b23253835f ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
- Correct Invalid #define of MPUTIM_PTV_MASK for
   omap1510 & omap730 register definition

 MPUTIM_PTV_MASK is defined as
 #define MPUTIM_PTV_MASK		(0x7<<PTV_BIT)

 while it should have been
 #define MPUTIM_PTV_MASK		(0x7<<MPUTIM_PTV_BIT)

- Below Patch corrects the same

Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
2008-09-12 02:20:40 +02:00