Commit graph

49449 commits

Author SHA1 Message Date
Tom Rini
2476d26fd3 Merge git://git.denx.de/u-boot-rockchip 2018-03-29 08:25:56 -04:00
Philipp Tomsich
6837c58666 rockchip: sdhci: support 8bit bus-width
The Rockchip-specific SDHCI wrapper does not process the 'bus-width'
property in the SDHCI node. Consequently, the bus is always kept in
4bit mode, even if 8bit wide operation is available, supported and
requested in the DTS.

This change adds processing of the 'bus-width' property and sets the
host capability flag for an 8bit wide bus, if set to 8. As the logic
in sdhci.c does not support clearing the 4bit capability, we assume
that 4bit operation is always supported.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:47:08 +02:00
Philipp Tomsich
47b8583f58 rockchip: mmc: update MAINTAINERS
The Rockchip-specific wrappers to the DW-MMC and the SDHCI driver
were not covered as part of what's maintained by the architecture
maintainers.  Add them here.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:47:07 +02:00
Philipp Tomsich
f0f7178e6b rockchip: defconfig: puma-rk3399: enable DMA for SDHCI controller
For the RK3399-Q7, we have a fast eMMC connected in an 8 bit wide
configuration to the SDHCI controller (sdhci@fe330000).  Enable DMA
within the SDHCI driver to get the best performance out of it.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:47:06 +02:00
Mark Kettenis
d928695ed6 rockchip: rk3399: set fdtfile
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:44:59 +02:00
Alexander Kochetkov
6b0c26fa05 rockchip: clk: rk3188: update dpll settings to make EMAC work
The patch set dpll settings for 300MHz to values used by binary
blob[1]. With new values dpll still generate 300MHz clock, but
EMAC work. Probably with new values dpll generate more stable clock.

dpll on rk3188 provide clocks to DDR and EMAC. With current
dpll settings EMAC doesn't work on radxa rock. EMAC sends packets
to network, but it doesn't receive anything. ifconfig shows a lot
of framing errors.

[1] https://github.com/linux-rockchip/u-boot-rockchip/blob/u-boot-rk3288/
    tools/rk_tools/3188_LPDDR2_300MHz_DDR3_300MHz_20130830.bin

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:44:59 +02:00
Punit Agrawal
6e60779156 video: rk3288_mipi: Combine NULL check into IS_ERR_OR_NULL()
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:44:58 +02:00
Heinrich Schuchardt
0ea91c3240 video: rk3288_mipi: check in rk_mipi_ofdata_to_platdata
The error checking should also catch the case that no range has beeen
defined.
syscon_get_first_range() returns NULL if no range is defined.
cf. rk3399_mipi.c

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:44:58 +02:00
Punit Agrawal
a89c725d2c video: rk3399_mipi: Combine NULL check into IS_ERR_OR_NULL()
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:44:58 +02:00
Heinrich Schuchardt
fca10453cf video: rk3399_mipi: correct error checking
Pointers are never negative. Use macro IS_ERR() for checking.
cf. rk3288_mipi.c

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:30:31 +02:00
Heinrich Schuchardt
e56a713eac usb: rockchip: remove duplicate assignement.
Assigning f_rkusb->reboot_flag twice doesn't make sense.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:30:31 +02:00
Heinrich Schuchardt
2ebc80e83c driver: ram: rockchip: rk3399: missing counter increment
If we want to check the duration we need to increment the counter.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:30:31 +02:00
Alexander Kochetkov
7a6d7d3e12 rockchip: pinctrl: rk3188: Move the iomux definitions into pinctrl-driver
Clean the iomux definitions at grf_rk3188.h, and move them into
pinctrl-driver for resolving the compiling error of redefinition.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:30:30 +02:00
Alexander Kochetkov
b1d093d256 rockchip: pinctrl: rk3036: Move the iomux definitions into pinctrl-driver
Clean the iomux definitions at grf_rk3036.h, and move them into
pinctrl-driver for resolving the compiling error of redefinition.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:30:30 +02:00
Philipp Tomsich
41837e8a6b rockchip: pinctrl: rk3399: add support for I2C[123467]
This adds support for the (to date unsupported) I2C controllers 1~4
and 6~7 (i.e. now all controllers except I2C5, which is not accessible
on the RK3399-Q7, are supported by pinctrl).

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:30:30 +02:00
Philipp Tomsich
339267a08d rockchip: pinctrl: rk3399: fix GPIO2B1 and GPIO2B2 shift value
The shift values for GPIO2B1 and GPIO2B2 had in fact referred to
GPIO2B0 and GPIO2B1, respectively.  This substitutes the correct
values.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:30:30 +02:00
Tom Rini
81cf7c8d45 Merge git://git.denx.de/u-boot-ubi 2018-03-25 12:02:13 -04:00
Tom Rini
2dc5165ee0 Merge git://git.denx.de/u-boot-spi 2018-03-25 12:01:44 -04:00
Tom Rini
f7c9e76fb8 Merge git://git.denx.de/u-boot-i2c 2018-03-25 12:00:48 -04:00
Tom Rini
89a650e0ff Xilinx changes for v2018.05
- Fix mkimage recognition
 - Update all my fragments
 
 ZynqMP:
 - Use clk driver
 - Support loading elfs in el1
 - Various DTS and defconfig changes
 - Enable newer pmufw versions
 - Support more clocks
 - Remove ep108
 - Secure image support
 - Fix memtest setup
 
 Zynq:
 - Enabling watchdog driver
 - Support more clocks
 - defconfig changes
 
 fpga:
 - Simplify error path
 
 net:
 - GMII case update
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlq1D5kACgkQykllyylKDCHt5gCaA4AhhC+BPrFvD8cTFKPix7vq
 ctYAnA63Ye8IkvyOhgn3QwBL5+YXbsVP
 =7++x
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.05' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.05

- Fix mkimage recognition
- Update all my fragments

ZynqMP:
- Use clk driver
- Support loading elfs in el1
- Various DTS and defconfig changes
- Enable newer pmufw versions
- Support more clocks
- Remove ep108
- Secure image support
- Fix memtest setup

Zynq:
- Enabling watchdog driver
- Support more clocks
- defconfig changes

fpga:
- Simplify error path

net:
- GMII case update
2018-03-25 12:00:00 -04:00
Petr Vorel
c0ce4ceaba Convert CONFIG_UBI_SILENCE_MSG to Kconfig
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
2018-03-24 06:37:25 +01:00
Petr Vorel
afb6fda2ae Convert CONFIG_UBIFS_SILENCE_MSG to Kconfig
Introduce another difference from upstream (kernel) source in
fs/ubifs/super.c: adding preprocessor condition as y variable in
mount_ubifs() depends on CONFIG_UBIFS_SILENCE_MSG:
fs/ubifs/super.c:1337:15: error: variable ?y? set but not used [-Werror=unused-but-set-variable]
  long long x, y;

Not setting CONFIG_UBIFS_SILENCE_MSG in am335x_igep003x_defconfig and
igep0032_defconfig. Although it was defined in their config headers, it
depends on CMD_UBIFS which is not set for them.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Heiko Schocher <hs@denx.de>
2018-03-24 06:37:10 +01:00
Petr Vorel
e995128158 ubifs: Reintroduce using CONFIG_UBIFS_SILENCE_MSG
Use of CONFIG_UBIFS_SILENCE_MSG was added in
147162dac6 ("ubi: ubifs: Turn off verbose prints")

Then it was removed in
ff94bc40af ("mtd, ubi, ubifs: resync with Linux-3.14")

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
2018-03-24 06:36:54 +01:00
Sjoerd Simons
63018a3edd omap3: spi: Correct ti, pindir-d0-out-d1-in parsing
The ti,pindir-d0-out-d1-in property is not expected to have a value
according to the device-tree binding, so treat it as a boolean not a
uint property.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-03-23 23:03:29 +05:30
Tom Rini
423effc04a Merge git://git.denx.de/u-boot-arc
Alexey:
 1. Significantly rework cache-related functionality.
    In particular that fixes coherency problems in some corner-cases,
    allows us to enable and disable caches in run-time and still
    have properly running system, finally support execution from
    real flash (before we used to run from DDR from the very beginning).

 2. Remove string routines implemented in assembly.
    That allows us to build and run U-Boot on wide range of ARC cores
    with different configurations. I.e. whatever tuning is used on GCC's
    command-line we'll get code for desired flavor of ARC.
    Otherwise for each and every corner-case we would need to add ifdefs
    in assembly code to accommodate missing instructions etc.

 3. Get use of GCC's garbage collector which helps to slim-down resulting image
    quite a bit.

 4. Also now we may disable U-Boot self-relocation for ARC if needed either
    by platform or for debugging purposes.
2018-03-23 09:31:24 -04:00
Eugeniy Paltsev
f665c14f04 ARC: bootm: Refactor GO and PREP subcommands implementation
Refactor GO and PREP subcommands implementation for a simpler
override in the boards platform code.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-03-23 15:57:51 +03:00
Michal Simek
8ae3d0b50c MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments
Fix my fragments to list all files in the repo.

Also fix path to for Xilinx Zynq SoC (mach-zynq)
It should be the part of
"ARM: zynq: move SoC sources to mach-zynq"
(sha1: 0107f24036)

And cover dts files in board MAINTAINERS files.

Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:36:15 +01:00
Michal Simek
d28baea078 tools: xilinx: Fix zynq/zynqmp image recognition
There is an issue to recognize zynq or zynqmp image because header
checking is just the same. That's why zynqmp images are recognized as
zynq one.
Check unused fields which are initialized to zero in zynq format
(__reserved1 0x38 and __reserved2 0x44) which are initialized for
zynqmp. This should ensure that images are properly recognized by:
./tools/mkimage -l spl/boot.bin

Also show image type as ZynqMP instead of Zynq which is confusing.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Alexander Graf <agraf@suse.de>
2018-03-23 09:36:15 +01:00
Siva Durga Prasad Paladugu
c436bf92f6 arm64: zynqmp: Add support for verifying secure images
This patch adds new command "zynqmp" to handle zynqmp
specific commands like "zynqmp secure". This secure command is
used for verifying zynqmp specific secure images. The secure
image can either be authenticated or encrypted or both encrypted
and authenticated. The secure image is prepared using bootgen
and will be in xilinx specific BOOT.BIN format. The optional
key can be used for decryption of encrypted image if user
key was specified while creation BOOT.BIN.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:36:15 +01:00
Michal Simek
348dbf4368 arm64: zynqmp: Remove ep108 board
ZynqMP Emulation board is no longer tested and there is no reason to
keep maintaining it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:59 +01:00
Siva Durga Prasad Paladugu
83bf2ff03d arm64: zynqmp: Correct EG/EV part detection logic
The vcu disable bit in efuse ipdisable register is valid only
if PL powered up so, consider PL powerup status for determing
EG/EV part. If PL is not powered up, ignore EG/EV part of string.
The PL powerup status will be filled by pmufw based on PL PROGB
status in the 9th bit of version field.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:44 +01:00
Vipul Kumar
a79b590f78 arm64: zynqmp: Print the value of pl clocks and wdt clock using clk dump
This patch print pl clocks (pl0...pl3) and watchdog
clock using clk dump.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:44 +01:00
Vipul Kumar
2453c69518 arm64: zynqmp: nand: Fixed NAND erase issue for size 1GiB or more
NAND erase was not happening for size 1GiB or more. Erase
command was executing successfully but in actual, it was not
erasing.
This patch fixed erase issue for 1 GiB or more size nand.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:44 +01:00
Michal Simek
2950e0b5a6 arm: zynq: Remove OF_EMBED configuration for zc770 xm011 x16
Use appended dtb which is default option for zynq boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:44 +01:00
Michal Simek
a587b501fa arm: zynq: Setup the same bootcommand as for zc770 xm011 x8
The same command should be used for x16 configuration.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:44 +01:00
Vipul Kumar
fce0a6b521 arm64: zynqmp: Changed scratch address used by the alternate memory test
This patch changed CONFIG_SYS_MEMTEST_SCRATCH address to the
accessible DDR address used by alternate memory test.
Before this, 0xfffc0000 address was used, which is the OCM
address and not enabled in MMU table. So, whenever trying
to access 0xfffc0000 address, got Synchronous Abort exception.

After changing CONFIG_SYS_MEMTEST_SCRATCH address, alternate
memory test is working fine.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:44 +01:00
Michal Simek
f5e2943b8b arm: zynq: Enable cadence driver on zc706
Enable watchdog with reset-on-timeout feature.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:43 +01:00
Michal Simek
e6cc3b25d7 arm: zynq: Wire watchdog internals
Watchdog is only enabled in full u-boot. Adoption for SPL should be also
done because that's the right place where watchdog should be enabled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:43 +01:00
Shreenidhi Shedi
42537ca4c8 watchdog: Add Cadence watchdog driver
This IP can be found on Zynq and ZynqMP devices.
The driver was tested with reset-on-timeout; feature.

Also adding WATCHDOG symbol to Kconfig because it is required.

Signed-off-by: Shreenidhi Shedi <imshedi@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:43 +01:00
Michal Simek
58afff43e3 clk: zynq: Show watchdog clock rate properly
watchdog clock is also connected to cpu 1X clocksource.

Zynq> clk dump
...

Before:
      swdt          4294967290
After:
      swdt           111111110

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:43 +01:00
Michal Simek
1cf6cac4d1 arm64: zynqmp: Enable newer pmufw versions
As of now newer pmufw is keeping old interfaces. That's why permit
u-boot to run on newer version. Recommended version will be setup later.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:43 +01:00
Siva Durga Prasad Paladugu
d77081cf50 net: zynq_gem: Dont run any phy detection logic for GMII case
This patch bypasses phy detection logic for GMII interface
and just depend on phy address received from DT. This patch
is required as phy detection logic is different for some phys
like xilinx phy which can be connected over SGMII and GMII
interface.
This fixes the issue of ethernet failures when xilinx phy is
connected over GMII interface.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-23 09:34:42 +01:00
Nitin Jain
51916864b3 arm64: zynqmp: Add support to load an app at EL1
This patch is adding support to switch to EL1 while loading an EL1
application with u-boot running at EL above EL1 in aarch64 mode.

Signed-off-by: Nitin Jain <nitinj@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:42 +01:00
Siva Durga Prasad Paladugu
429f0b9e14 arm: zynq: Enable debug uart on Zedboard
It helps with debugging.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:42 +01:00
Michal Simek
12e6c06921 arm64: zynqmp: Enable ethernet driver for zc1751-dc5
Enable missing driver on this board.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:42 +01:00
Michal Simek
cda1e3fb0f fpga: Simplify error path in fpga_add
Check !desc earlier to simplify code.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Reviewed-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
2018-03-23 09:34:42 +01:00
Michal Simek
734bf172e9 xilinx: Sync defconfigs with latest Kconfig updates
Make defconfigs up2date with current location.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:00 +01:00
Michal Simek
ee4983f73a arm64: zynqmp: Convert board to use zynqmp-clk driver
Use zynqmp clock driver instead of fixed clocks.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:30:44 +01:00
Heinrich Schuchardt
d45c2f392e i2c: lpi2c: remove superfluous assignments
In

	lpi2c_status_t result = A;
	result = B;

the first assignment has no effect. Let's remove it.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-23 08:28:49 +01:00
Tom Rini
b0af10443a Merge git://git.denx.de/u-boot-net 2018-03-22 16:35:43 -04:00