Commit graph

81 commits

Author SHA1 Message Date
Fabio Estevam
67ee3dd35e mx53: Make PLL2 to be the parent of UART clock
Change the parent UART clock to be PLL2, so that U-boot can also boot
a Freescale 2.6.35 kernel for mx53.

FSL kernel and U-boot changed the UART parent from PLL3 to PLL2 to avoid
conflicts with IPU clocks, so that the video resolution can be changed
without affecting the UART clock.

On a 2.6.35 kernel the serial console is messed up after IPU driver is loaded
and this patch fixes this problem.

Tested on a mx53loco board booting a FSL kernel and also a mainline kernel.

Reported-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2012-03-27 09:41:17 +02:00
Jason Liu
0d8a749950 i.mx: i.mx5: update imx_get_mac_from_fuse function
FEC does not work on the i.mx51/53evk board, it will hangup
In:    serial
Out:   serial
Err:   serial
Net:

After bisect, it due to the following commit:
be252b6 net: imx: Add multi-FEC support for imx_get_mac_from_fuse
has change the imx_get_mac_from_fuse fucntion prototype, but fail
to update i.mx5, here it does it.

After apply this patch, u-boot works again on i.mx51/53 evk boards.

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-02-12 10:11:27 +01:00
Wolfgang Grandegger
5d2947a3fc USB: MX5: add helper functions to enable USB clocks
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>

V2: Fix spacing in crm_regs.h
2011-12-11 14:49:25 +01:00
Jason Liu
18936ee2ad i.mx: introduce the armv7/imx-common folder
In order to support the coming MX6 platform and to reducde
the duplicated code, we had better move some common files
or functions to the imx-common folder for sharing.

This patch does the following:
- move speed.c file from armv7/mx5/speed.c to armv7/imx-common/speed.c
- move armv7/mx5/timer.c to armv7/imx-common/timer.c, no any new feature
  added but just fix the checkpatch errors in the old file and remove
  the CONFIG_SYS_MX5_CLK32 reference in the file
- create one new file cpu.c file to store the common function with i.mx5/6

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc:Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2011-12-09 17:30:10 +01:00
Simon Glass
5acc907294 mx5: Correct a warning in clock.c
This corects the warning below, obtained with my gcc 4.6 compiler.

arch/arm/cpu/armv7/mx5/libmx5.o: In function `decode_pll':
arch/arm/cpu/armv7/mx5/clock.c:94: undefined reference to `__aeabi_uldivmod'

I am not able to test this on MX5x hardware, but it does improve the
MAKEALL output for me. You may already have a similar patch, but I cannot
see it on the list.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-12-06 23:59:39 +01:00
Fabio Estevam
41c881c0ca mx53: Turn off child clocks before reconfigure perclk_root
In addition to ensuring that PERCLK remains at least 2.5 times slower
than the AHB clock, certain steps need to be followed to ensure robust
operation of PERCLK when reconfiguring the PERCLK clock source.

To properly configure the PERCLK clock source, the following steps are
required:

1.In the CCGR registers, gate the clocks to all PERCLK-dependent
  modules.
2.Select the desired input clock for the PERCLK root clock (to be either
  source from the peripherals main source clock or the
  lp_apm clock source). Refer to the CMCBR register,  perclk_lp_apm_sel bit.
3.Configure the perclk_pred1, perclk_pred2, and perclk_podf dividers
  to the desired setting.  Refer to the CBCDR register for details.
4.In the CCGR registers, enable the desired clocks for the
  PERCLK-dependent module clocks.

If these steps aren't followed, GPT timer may stop and the kernel stops
at "Calibrating delay loop".

Signed-off-by: Terry Lv <r65388@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-11-04 22:06:37 +01:00
Fabio Estevam
77f11a99e1 imx: fix coding style
Fix checkpatch warning and errors in several i.MX related files.

While at it also address a checkpatch warning at arch/arm/cpu/armv7/mx5/soc.c
regarding the usage of extern in a C file.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-10-27 21:56:32 +02:00
Marek Vasut
37a6d2085e MX5: Clean up the output of "clocks" command
The new output looks like this:
> clocks
PLL1            800 MHz
PLL2            665 MHz
PLL3            216 MHz

AHB          133000 kHz
IPG           66500 kHz
IPG PERCLK   665000 kHz

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Jason Liu <jason.hui@linaro.org>
2011-09-30 22:01:05 +02:00
Marek Vasut
95c0eb198d MX5: Add AHB clock reporting and fix IPG clock reporting
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
2011-09-30 22:01:05 +02:00
Marek Vasut
bf2eaf5112 MX5: Modify the PLL decoding algorithm
The PLL decoding algorithm didn't take into account many configuration bits.
Adjust it according to Linux kernel. Also, add PLL4 for MX53.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Jason Hui <jason.hui@linaro.org>
Tested-by: Jason Liu <Jason.hui@linaro.org>
2011-09-30 22:01:05 +02:00
Stefano Babic
a4814a69d3 Makefile : fix generation of cpu related asm-offsets.h
commit 0edf8b5b2f breaks
building on a different directory with the O= parameter.
The patch wil fix this issue, generating always asm-offsets.h before
the other targets.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Wolfgang Denk <wd@denx.de>
2011-09-07 21:41:27 +02:00
Stefano Babic
7acec25948 MX: MX35 / MX5: uniform clock command with powerpc
There was already a command to show the processor clocks
for PowerPC (clocks). For i.MX, the "clockinfo" command
was introduce. The patch sets the same command name used on
PowerPC.
A nasty and not needed newline is also dropped in the help for
the command.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
David Jander
9db1bfa110 ARM: MX51: PLL errata workaround
This is a port of the official PLL errata workaround from Freescale to
mainline u-boot.
The PLL's in the i.MX51 processor can go out of lock due to a metastable
condition in an analog flip-flop when used at high frequencies.
This workaround implements an undocumented feature in the PLL (dither
mode), which causes the effect of this failure to be much lower (in terms
of frequency deviation), avoiding system failure, or at least decreasing
the likelihood of system failure.

Signed-off-by: David Jander <david@protonic.nl>
2011-09-04 11:36:11 +02:00
Graeme Russ
17659d7de9 Timer: Remove reset_timer_masked()
In some circumstances, reset_timer_masked() was called be timer_init() in
order to perform architecture specific timer initialisation. In such
cases, the required code in reset_timer_masked() has been moved into
timer_init()
2011-07-26 14:54:15 +02:00
Graeme Russ
4769be21cc Timer: Remove reset_timer() for non-Nios2 arches 2011-07-26 14:53:30 +02:00
Graeme Russ
5c8404aff1 Timer: Remove set_timer completely 2011-07-26 14:52:17 +02:00
David Jander
6e25b6ce5d ARM: MX5: Fix broken leftover TO-2 errata workaround
This check was broken. r3 does not contain the silicon revision anymore, so
we need to reload it. Also, this errata only applies to i.MX51.

Signed-off-by: David Jander <david@protonic.nl>
Acked-by: Stefano Babic <sbabic@denx.de>
2011-07-18 14:41:48 +02:00
Stefano Babic
0edf8b5b2f MX5: Update to autogenerated asm-offsets.h
On i.MX5, the asm-offsets.h file is not yet generated as it should be.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Matthias Weisser <weisserm@arcor.de>
2011-07-14 15:41:24 +02:00
Fabio Estevam
a6e961c292 MX5: Introduce a function for setting the chip select size
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-07-04 10:55:26 +02:00
Fabio Estevam
aa1cb689d5 MX53: Handle silicon revision 2.1 case
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-23 08:36:46 +02:00
Jason Liu
7517a793f0 MX5: factor out boot cause funciton to common code
factor out boot cause function to common code to avoid
the duplicate code in each board support package

Signed-off-by: Jason Liu <jason.hui@linaro.org>
2011-04-27 19:38:05 +02:00
Stefano Babic
db106ef7eb MX5: Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc bss
The usage of bss values in drivers before initialisation of bss is forbidden.
In that special case some data in .rel.dyn gets corrupted.

This patch is the same as recently applied for arm926js architecture.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Heiko Schocher <hs@denx.de>
2011-02-02 00:54:43 +01:00
Liu Hui-R64343
595f3e5645 MX5: Add initial support for MX53 processor
Add initial support for Freescale MX53 processor,

- Add the iomux support and the pin definition,
- Add the regs definition, clean up some unused def from mx51,
- Add the low level init support, make use the freq input of setup_pll macro

Signed-off-by: Jason Liu  <r64343@freescale.com>
2011-02-02 00:54:41 +01:00
John Rigby
2956532625 Move DECLARE_GLOBAL_DATA_PTR to file scope
It can be optimised out by the compiler otherwise resulting
in obscure errors like a board not booting.

This has been documented in README since 2006 when these were
first fixed up for GCC 4.x.

Signed-off-by: John Rigby <john.rigby@linaro.org>

Fix some additional places.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-By: Albert ARIBAUD <albert.aribaud@free.fr>
2010-12-21 11:33:36 +01:00
Wolfgang Denk
ac8983bcba Merge branch 'master' of git://git.denx.de/u-boot-imx 2010-12-09 20:52:44 +01:00
Liu Hui-R64343
565e39c577 imx: Get fec mac address from fuse
The patch is to support getting FEC MAC address from fuse bank.

Signed-off-by: Jason Liu <r64343@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
2010-11-21 18:24:20 +01:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Stefano Babic
9a0044183a MX51: remove warning in clock.c
The patch removes the warning:

clock.c:291: warning: initialization from incompatible pointer type

after  constification of args[]

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-28 11:08:52 +02:00
Jason Liu
95707aaa9e MX5:use common u-boot.lds of cpu layer
Remove u-boot.lds from mx5 and use the common u-boot.lds
of cpu layer. This patch also fix the building errors:

arch/arm/cpu/armv7/start.o: In function `_rel_dyn_start_ofs':
arch/arm/cpu/armv7/start.S:283: undefined reference to `__rel_dyn_start'
arch/arm/cpu/armv7/start.o: In function `_rel_dyn_end_ofs':
arch/arm/cpu/armv7/start.S:283: undefined reference to `__rel_dyn_end'
arch/arm/cpu/armv7/start.o: In function `_dynsym_start_ofs':
arch/arm/cpu/armv7/start.S:283: undefined reference to `__dynsym_start'

Signed-off-by: Jason Liu <r64343@freescale.com>
2010-10-28 10:32:20 +02:00
Jason Liu
65e62d6941 MX5: Remove dead code with ENABLE_IMPRECISE_ABORT
This code section is dead due to we never define
ENABLE_IMPRECISE_ABORT for MX5

Signed-off-by: Jason Liu <r64343@freescale.com>
2010-10-19 12:28:08 +02:00
Jason Liu
ff9f475d5d MX5: rename mx51 to mx5
Rename mx51 to mx5 in order to support more mx51
like-style SOCs such as MX53 and the followings.

Signed-off-by: Jason Liu <r64343@freescale.com>
2010-10-18 10:43:19 +02:00