Commit graph

40 commits

Author SHA1 Message Date
Masahiro Yamada
25b4adbba0 include: remove CONFIG_SPL/CONFIG_TPL definition in config headers
Now CONFIG_SPL and CONFIG_TPL are defined in Kconfig.

Remove the redundant definition in config headers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2014-07-30 14:42:03 -04:00
Masahiro Yamada
4ce9957029 include: define CONFIG_SPL and CONFIG_TPL as 1
We are about to switch to Kconfig in the next commit.
But there are something to get done beforehand.

In Kconfig, include/generated/autoconf.h defines boolean
CONFIG macros as 1.

CONFIG_SPL and CONFIG_TPL, if defined, must be set to 1.
Otherwise, when switching to Kconfig, the build log
would be sprinkled with warning messages like this:
  warning: "CONFIG_SPL" redefined [enabled by default]

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:02 -04:00
Michal Simek
2b25721645 ARM: zynq: Enable generic board for Xilinx Zynq
Enable CONFIG_SYS_GENERIC_BOARD for all Zynq boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [on ZC706 board]
2014-07-23 15:28:22 +02:00
Heiko Schocher
21d29f7f9f bootm: make use of legacy image format configurable
make the use of legacy image format configurable through
the config define CONFIG_IMAGE_FORMAT_LEGACY.

When relying on signed FIT images with required signature check
the legacy image format should be disabled. Therefore introduce
this new define and enable legacy image format if CONFIG_FIT_SIGNATURE
is not set. If CONFIG_FIT_SIGNATURE is set disable per default
the legacy image format.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Lars Steubesand <lars.steubesand@philips.com>
Cc: Mike Pearce <mike@kaew.be>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: Simon Glass <sjg@chromium.org>
2014-06-05 14:44:56 -04:00
Albert ARIBAUD
c534d2fdcf Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master' 2014-05-23 22:50:23 +02:00
Siva Durga Prasad Paladugu
1a897668ac fpga: Added support to load bit stream from SD/MMC
Added support to load a bitstream image in chunks by reading it in
chunks from SD/MMC.
Command format:
loadfs [dev] [address] [image size] [blocksize] <interface>
       [<dev[:part]>] <filename>
Example: fpga loadfs 0 1000000 3dbafc 4000 mmc 0 fpga.bin

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-20 15:23:46 +02:00
Michal Simek
26ea9ce5b8 zynq: Enable fpga loadp and loadbp commands
Use new fpga commands for loading partial bitstreams.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-20 15:23:46 +02:00
Siva Durga Prasad Paladugu
64e809afea fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK
Guard the LOADMK functionality with config to provide
an option to enable or disable it.
Enable it for all platforms in mainline which enable CONFIG_CMD_FPGA.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-20 15:23:46 +02:00
Masahiro Yamada
0dfbcf02de zynq: load u-boot-dtb.img if CONFIG_OF_SEPARATE is defined
SPL should load "u-boot-dtb.img" if both CONFIG_OF_CONTROL
and CONFIG_OF_SEPARATE are defined.
Otherwise, "u-boot.img" should be loaded.

Since CONFIG_OF_CONTROL is always undefined for SPL_BUILD,
the undef block should be moved below the conditional definition
of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-15 13:57:28 +02:00
Michal Simek
841426ad9f ARM: zynq: Extend maximum number of command arguments
15 was too small for variables stored in file on MMC.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-14 07:46:40 +02:00
Siva Durga Prasad Paladugu
2e38a90672 ARM: zynq: Enable EXT4 configs
Enabled the EXT4 configs.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-14 07:43:35 +02:00
Siva Durga Prasad Paladugu
47b35a516b ARM: zynq: Move USB/SD/MMC common FAT configs
Moved the USB/SD/MMC common FAT configs separately
to avoid redefinition warnings.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-14 07:43:35 +02:00
Siva Durga Prasad Paladugu
00cf6b4e22 ARM: zynq: Enable the FAT write capability
Enable the FAT write capability for SD/MMC write
functionality.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-14 07:43:35 +02:00
Siva Durga Prasad Paladugu
c6024c8edd ARM: zynq: Added USB host support for zynq boards
Added configs to support USB host for zynq boards.
Also added a command usbboot to boot from usb.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-14 07:43:35 +02:00
Michal Simek
3d456eec43 ARM: zynq: Extend kernel image size to 60MB
Extend max kernel image size. Gunzip is checking
this value. If kernel is larger, message below is shown.

Uncompressing Kernel Image ... Error: inflate() returned -5
GUNZIP: uncompress, out-of-mem or overwrite error -
must RESET board to recover

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-14 07:43:34 +02:00
Michal Simek
1540fb725b ARM: zynq: Call zynq board_init() in SPL
Call board_init() if SPL is configured with CONFIG_SPL_BOARD_INIT.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2014-05-14 07:43:34 +02:00
Michal Simek
7450a7f730 zynq: Do not use SPL OF initialization
Disable CONFIG_OF_CONTROL for SPL compilation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-03-04 09:27:34 -05:00
Tom Rini
6853e6aa77 Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-02-20 12:18:59 -05:00
Michael Burr
18948632a9 i2c: zynq: Add support for the second i2c controller
Initialize the second i2c controller.

Signed-off-by: Michael Burr <michael.burr@logicpd.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-20 06:46:55 +01:00
Michal Simek
d7e269cfbd zynq: Add support for U-BOOT SPL
SPL is using ps7_init.c/h files which are generated
from design tools which have to be copied to
boards/xilinx/zynq folder before compilation.

BSS section is moved to SDRAM because fat support
requires more space than SRAM size.

Added:
- MMC and QSPI support
- Boot OS directly from SPL
- Enable SPL command

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>
2014-02-19 09:41:22 +01:00
Soren Brinkmann
d6c9bbaad1 zynq: Implement dump clock command
Enable and implement dump clock command which shows
soc frequencies.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19 09:41:22 +01:00
Soren Brinkmann
6c3e61de3c zynq: Provide a framework to read clock frequencies
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19 09:41:21 +01:00
Michal Simek
bf83495040 zynq: serial: Simplify serial driver initialization
Define both serial uarts in the driver and return
default uart based on board configuration.

- Move baseaddresses to hardware.h
- Define default baudrate and clock values

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19 09:41:21 +01:00
Michal Simek
427b2d4e5a zynq: Enable tftp put command
For saving content of memory via tftp to file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19 09:41:21 +01:00
Michal Simek
ae9f489977 zynq: Extend kernel image size to 20MB
Extend max kernel image size. Gunzip is checking
this value. If kernel is larger, message below is shown.

Uncompressing Kernel Image ... Error: inflate() returned -5
GUNZIP: uncompress, out-of-mem or overwrite error -
must RESET board to recover

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-19 09:41:21 +01:00
Michal Simek
38716189d4 zynq: Fix elf header generation
This patch is here because of:
"arm: keep all sections in ELF file"
(sha1: 47ed5dd031)

Our tools expect to have elf with only LOAD header.
Without this fix also PHDR, INTERP and DYNAMIC headers
are available in ELF.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-13 15:33:00 +01:00
Michal Simek
dfa94058f5 zynq: Use full tftpboot command instead of shortcut tftp
The reason is enabling tftpput command where
tftp shorcut stops to work for tftpboot.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-13 15:25:52 +01:00
Jagannadha Sutradharudu Teki
a8826eb4b3 zynq-common: Enable verified boot(RSA)
CONFIG_FIT_SIGNATURE - signature node support in FIT image
CONFIG_RSA - RSA lib support

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
f8f36c5dda dts: zynq: Add basic fdt support
This patch provides a basic fdt support for zynq u-boot.

zynq-7000.dtsi-> initial arch dts file
zynq-zed.dts -> initial zed board dts file
more devices should be added in subsequent patches.

u-boot build: once configuring of a board done
for building dtb with zynq-zed.dts as an input
zynq-uboot> make DEVICE_TREE=zynq-zed

Enabled CONFIG_OF_SEPARATE for building dtb separately.
There is a new binary called u-boot-dtb.bin which is a u-boot
with devicetree supported.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
b660ca13a8 zynq-common: Define CONFIG_ENV_OVERWRITE
Defined CONFIG_ENV_OVERWRITE, which allow to
overwrite serial baudrate and ethaddr.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
ed53e4d690 zynq-common: Define flash env. partition
Last 128Kb sector of 1Mb flash is defined as u-boot
environment partition.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
18eee22f4c zynq-common: Change Env. Sector size to 128Kb
Changed Env. Sector size from 0x10000 to 128Kb

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
e83f61a6b3 zynq-common: Define default environment
Defined default env. for autoboot FIT image from
respective boot devices.

Default settings:
fit_image=fit.itb
load_addr=0x2000000
fit_size=0x800000
flash_off=0x100000
nor_flash_off=0xE2100000

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
b3de92495f zynq: Add support to find bootmode
Added support to find the bootmodes by reading
slcr bootmode register. this can be helpful to
autoboot the configurations w.r.t a specified bootmode.

Added this functionality on board_late_init as it's not
needed for normal initializtion part.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
fe5eddbf98 zynq: Add zynq_zc770 xm012 board support
ZC770 is a complete development board based on the Xilinx Zynq-7000
All Programmable SoC, similar to ZC70x board but which has four
different daughter cards, like XM010, XM011, XM012 and XM013

ZC770 XM012:
- 1GB DDR3
- 64MiB Numonyx NOR flash
- USB-UART

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Cc: Stefan Roese <sr@denx.de>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
65da1efde2 zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
Adds configurations for Catalyst 24WC08 EEPROM, which
is present on the zynq boards.

Enable EEPROM support for zc70x boards.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
0f5c215650 zynq-common: Define exact TEXT_BASE
Defined TEXT_BASE for u-boot starts from 0x4000000
w.r.t zynq memory-map.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
86737bcf07 zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
CONFIG_SYS_SDRAM_SIZE is specific to a board hence moved
to specific pre-config board files.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:33 +01:00
Jagannadha Sutradharudu Teki
022b02064a zynq: Add zynq zc70x board support
The Zynq-7000 APSOC zc702 and zc706 enabled complte embedded
processing includes ASIC and FPGA design.

ZC702-:

APSOC:
- XC7Z020-CLG484-1
Memory:
- DDR3 Component Memory 1GB
- 16MB Quad SPI Flash
- IIC - 1 KB EEPROM
Connectivity:
- Gigabit Ethernet GMII, RGMII and SGMII.
- USB OTG - Host USB
- IIC Bus Headers/HUB
- 1 CAN with Wake on CAN
- USB-UART
Video/Display:
- HDMI Video OUT
- 8X LEDs
Control & I/O:
- 3 User Push Buttons
- 2 User Switches
- 8 User LEDs

For more info on zc702 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm

ZC706-:

APSOC:
- XC7Z045 FFG900 -2 AP SoC
Memory:
- DDR3 Component Memory 1GB (PS)
- DDR3 SODIM Memory 1GB (PL)
- 2X16MB Quad SPI Flash (dual parallel)
- IIC - 1 KB EEPROM
Connectivity:
- PCIe Gen2x4
- SFP+ and SMA Pairs
- GigE RGMII Ethernet (PS)
- USB OTG 1 (PS) - Host USB
- IIC Bus Headers/HUB (PS)
- 1 CAN with Wake on CAN (PS)
- USB-UART
Video/Display:
- HDMI 8 color RGB 4.4.4 1080P-60 OUT
- HDMI IN 8 color RGB 4.4.4
Control & I/O:
- 2 User Push Buttons/Dip Switch, 2 User LEDs
- IIC access to GPIO
- SDIO (SD Card slot)
- 3 User Push Buttons, 2 User Switches, 8 User LEDs

For more info on zc706 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:32 +01:00
Jagannadha Sutradharudu Teki
06fe8daeb5 zynq-common: Rename zynq with zynq-common
zynq.h -> zynq-common.h, zynq-common is Common
configuration options for all Zynq boards.

zynq.h is no longer exists hense removed from boards.cfg

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-10 15:18:32 +01:00
Renamed from include/configs/zynq.h (Browse further)