Commit graph

9 commits

Author SHA1 Message Date
Eugen Hristev
5dc68b07e7 ARM: dts: at91: sama7g5ek: enable pull-up for serial debug line
If the serial tx/rx are floating, it can happen that bogus characters
are detected on the line at boot time. This leads to U-boot accidentally
thinking someone pressed a key to stop autoboot, thus stopping booting process.
This can happen if the serial cable is not connected. There are hardware
pull-ups on the board connected to serial cable VBUS.
To solve this when the cable is not plugged, enable internal pull-ups as well
for the tx/rx lines.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-02-11 09:26:40 +02:00
Nicolas Ferre
aeaef07c51 ARM: dts: sama7g5ek: fix TXC pin configuration
TXC line is directly connected from the SoC to the KSZ9131 PHY. There
is a transient state on this signal, before configuring it to RGMII,
which leads to packet transmit being blocked.
Keeping a pull-up when muxing this pin as function A (G0_TXCK) fixes
the issue.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
9b614c87bb ARM: dts: sama7g5ek: add i2c1 bus and eeproms
Add node for flx1 i2c1 subnode (and alias to bus 0)
This bus has two eeprom devices connected.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Eugen Hristev
7f4c89cc5c ARM: dts: at91: sama7g5ek: enable sdmmc0 with pinctrl
Enable sdmmc0 on this board. A non-removable eMMC is connected on this
block.
Configure pincontrol accordingly.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:16 +02:00
Claudiu Beznea
3e5853e6a1 ARM: dts: sama7g5: add GMAC1
Add GMAC1.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
e95af87e9b ARM: dts: sama7g5: add GMAC0
Add GMAC0.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Eugen Hristev
7d41a8da84 ARM: dts: at91: sama7g5ek: add pinctrl for sdmmc1 and flx3
Add pinctrl for sdmmc1 and flx3.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:15 +02:00
Claudiu Beznea
3b86096a59 ARM: dts: sama7g5: move clock frequencies for xtals in board file
Move clock frequencies for crystals on board specific files.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-01-07 09:44:15 +02:00
Eugen Hristev
1d463d6735 board: atmel: sama7g5ek: add initial support for sama7g5ek
Add initial support for sama7g5 evaluation kit board.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-01-07 09:44:15 +02:00