Commit graph

66670 commits

Author SHA1 Message Date
Patrick Delaunay
b4d14bc81a Convert CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_0_2 to Kconfig
This converts the following to Kconfig:
CONFIG_ARMV7_PSCI_1_0
CONFIG_ARMV7_PSCI_0_2

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-17 08:51:29 -04:00
Thomas Schaefer
ea5003ad66 spl: fix ext4fs_mount return code handling
- Despite other ext4 filesystem functions, ext4fs_mount returns
  0 in case of error.
- This leads to u-boot crash in case that an SD card
  with valid partition table but without ext4 filesystem created
  in a partition is found on SD card.
- Fix this by returning a proper error code of '-1' from spl_load_image_ext
  function in case of ext4fs_mount error.

Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com>
[hthiery: slightly reword the commit message]
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-17 08:51:01 -04:00
Tero Kristo
9b83f9c594 cmd: booti: convert the debug print about image move to printf
Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-07-17 08:51:01 -04:00
Tero Kristo
fbde7589ce common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image
These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-07-17 08:51:01 -04:00
Tero Kristo
19c6808d87 image: fdt: bail out with error if no boot time FDT image found
Currently the boot continues if the FDT image is clearly corrupted,
which just causes the loaded OS to hang. Abort boot properly if the FDT
is corrupted.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-07-17 08:51:01 -04:00
Tom Rini
e6676a34c4 Convert CONFIG_MXC_UART to Kconfig
This converts the following to Kconfig:
   CONFIG_MXC_UART

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2020-07-17 08:47:29 -04:00
Rasmus Villemoes
e7885a48bb lz4: fix decompressor on big-endian powerpc
Booting an lz4-compressed kernel image fails on our powerpc board with
-EPROTONOSUPPORT. Adding a bit of debug prints, we get

  magic: 0x184d2204
  flags: 0x64
  reserved0: 1
  has_content_checksum: 1
  has_content_size: 0
  has_block_checksum: 0
  independent_blocks: 1
  version: 0
  block_descriptor: 70
  reserved1: 7
  max_block_size: 0
  reserved2: 0

So the magic is ok, but the version check fails, also some reserved
bits are apparently set. But that's because the code interprets the
"flags" and "block_descriptor" bytes wrongly:

Using bit-fields to access individual bits of an "on the wire" format
is not portable, not even when restricted to the C flavour implemented
by gcc. Quoting the gcc manual:

   * 'The order of allocation of bit-fields within a unit (C90 6.5.2.1,
     C99 and C11 6.7.2.1).'

     Determined by ABI.

and indeed, the PPC Processor ABI supplement says

   * Bit-fields are allocated from right to left (least to most
     significant) on Little-Endian implementations and from left to
     right (most to least significant) on Big-Endian implementations.

The upstream code (github.com/lz4/lz4) uses explicit shifts and masks
for encoding/decoding:

    /* FLG Byte */
    *dstPtr++ = (BYTE)(((1 & _2BITS) << 6)    /* Version('01') */
        + ((cctxPtr->prefs.frameInfo.blockMode & _1BIT ) << 5)
        + ((cctxPtr->prefs.frameInfo.blockChecksumFlag & _1BIT ) << 4)
        + ((unsigned)(cctxPtr->prefs.frameInfo.contentSize > 0) << 3)
        + ((cctxPtr->prefs.frameInfo.contentChecksumFlag & _1BIT ) << 2)
        +  (cctxPtr->prefs.frameInfo.dictID > 0) );

    /* Flags */
    {   U32 const FLG = srcPtr[4];
        U32 const version = (FLG>>6) & _2BITS;
        blockChecksumFlag = (FLG>>4) & _1BIT;
        blockMode = (FLG>>5) & _1BIT;
        contentSizeFlag = (FLG>>3) & _1BIT;
        contentChecksumFlag = (FLG>>2) & _1BIT;
        dictIDFlag = FLG & _1BIT;
        /* validate */
        if (((FLG>>1)&_1BIT) != 0) return err0r(LZ4F_ERROR_reservedFlag_set); /* Reserved bit */
        if (version != 1) return err0r(LZ4F_ERROR_headerVersion_wrong);        /* Version Number, only supported value */
    }

Do the same here, and while at it, be more careful to use unaligned
accessors to what is most likely unaligned. Also update the comment to
make it clear that it only refers to the lz4.c file, not the following
code of lz4_wrapper.c.

This has been tested partly, of course, by seeing that my
lz4-compressed kernel now boots, partly by running the (de)compression
test-suite in the (x86_64) sandbox - i.e., it should still work just
fine on little-endian hosts.

Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-07-17 08:45:29 -04:00
Heinrich Schuchardt
aac9f284db doc: Coccinelle: move to HTML doc
Move doc/README.coccinelle to doc/develop/coccinelle.rst using the current
linux-next version of the text.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-17 08:45:29 -04:00
Tom Rini
7c3cc6f106 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- New timer API to allow delays with a 32-bit microsecond timer
- Add dynamic ACPI structs (DSDT/SSDT) generations to the DM core
- x86: Enable ACPI table generation by default
- x86: Enable the copy framebuffer on Coral
- x86: A few fixes to FSP2 with ApolloLake
- x86: Drop setup_pcat_compatibility()
- x86: Primary-to-Sideband Bus minor fixes
2020-07-17 08:04:48 -04:00
Tom Rini
42e7659db0 i.MX for 2020.10
----------------
 
 - i.MX DDR driver fix/update for i.MX8M
 - i.MX pinctrl driver fix.
 - Use arm_smccc_smc to remove imx sip function
 - i.MX8M clk update
 - support booting aarch32 kernel on aarch64 hardware
 - fused part support for i.MX8MP
 - imx6: pcm058 to DM
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/708734785
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCXxCxWw8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76bPyACcDZ8gD9jf1P/Zh+7kqrGdIWwURF8AnAiEtNnu
 FhE/WQQj4mAEWE4F2bFE
 =7ceG
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200716' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

i.MX for 2020.10
----------------

- i.MX DDR driver fix/update for i.MX8M
- i.MX pinctrl driver fix.
- Use arm_smccc_smc to remove imx sip function
- i.MX8M clk update
- support booting aarch32 kernel on aarch64 hardware
- fused part support for i.MX8MP
- imx6: pcm058 to DM

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/708734785
2020-07-17 08:04:28 -04:00
Simon Glass
d40d2c5706 acpi: Enable ACPI table generation by default on x86
This should ideally be used by all x86 boards in U-Boot. Enable it by
default. If some boards don't use it, the cost is small.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
4021ee6388 x86: Rename board_final_cleanup() to board_final_init()
This function sounds like something that is called when U-Boot is about to
jump to Linux. In fact it is an init function.

Rename it to reduce confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
22a7396f7f x86: acpi: Correct the version of the MADT
Currently U-Boot implements version 2 but reports version 4. Correct it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
a308b1fa39 x86: Drop setup_pcat_compatibility()
This function does not exist anymore. Drop it from the header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
538c9b3d29 x86: Update the comment about booting for FSP2
The comment here applies only to FSP1, so update it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
9ef168676c x86: Store the coreboot table address in global_data
At present this information is used to locate and parse the tables but is
not stored. Store it so that we can display it to the user, e.g. with the
'bdinfo' command.

Note that now the GD_FLG_SKIP_LL_INIT flag is set in get_coreboot_info(),
so it is always set when booting from coreboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
487852b51b x86: apl: Adjust FSP-M code to avoid hard-coded address
Update this code to calculate the address to use, rather than hard-coding
it. Obtain the requested stack size from the FSP.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
efd3132852 x86: apl: Set the correct boot mode in the FSP-M code
If there is MRC information we should run FSP-M with a different
boot_mode flag since it is supposed to do a 'fast path' through the
memory init. Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
b336a2b8f6 x86: Add debugging to table writing
Writing tables is currently pretty opaque. Add a bit of debugging to the
process so we can see what tables are written and where they start/end in
memory.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
b95611f67e x86: apl: Fix save/restore of ITSS priorities
The FSP-S changes the ITSS priorities. The code that tries to save it
before running FSP-S and restore it afterwards does not work as U-Boot
relocates in between the save and restore. This means that the driver
data saved before relocation is lost and the new driver just sees zeroes.

Fix this by allocating space in the relocated memory for the ITSS data.
Save it there and access it from the driver after relocation.

This fixes interrupt handling on coral.

Also drop the log_msg_ret() in irq_first_device_type() since this function
can be called speculatively in places where we are not sure if there is
an interrupt controller of that type. The resulting log errors are
confusing when there is no error.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
a8c2789c09 x86: irq: Support flags for acpi_gpe
This binding currently has a flags cell but it is not used. Make use of it
to create ACPI tables for interrupts.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
11e27ae92b pmc: Move common registers to the header file
These registers need to be accesses from ACPI code, so move them to the
header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
62fba44d6d x86: apl: Hide the p2sb on exit from U-Boot
This confuses Linux's PCI probing so needs to be hidden when booting
Linux. Add a remove() method to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Tested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
f549d9bbde x86: apl: Support set_hide() in p2sb driver
Add support for this new method in the driver and in the fsp-s setup.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Tested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
6d349e2e43 p2sb: Add a method to hide the bus
The P2SB bus needs to be hidden in some cases so that it does not get
auto-configured by Linux. Add a method for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Tested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
4b0ec52b9e i2c: designware_i2c: Support ACPI table generation
Update the PCI driver to generate ACPI information so that Linux has the
full information about each I2C bus.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
[bmeng: Correct one typo in dw_i2c_gen_speed_config() comments]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
c61c8efd47 i2c: Add log_ret() on error
Add a few of these calls to make it easier to see where an error occurs,
if CONFIG_LOG_ERROR_RETURN is enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-17 14:32:24 +08:00
Simon Glass
767abfc6ce i2c: designware_i2c: Add a little more debugging
Add debugging for a few more values and also use log to show return values
when something goes wrong. This makes it easier to see the root cause.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-17 14:32:24 +08:00
Simon Glass
43ee86cc4b x86: gpio: Add support for obtaining ACPI info for a GPIO
Implement the method that converts a GPIO into the form used by ACPI, so
that GPIOs can be added to ACPI tables.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
eb2ebbcf56 x86: apl: Use memory-mapped access for VBT
Use the new binman memory-mapping function to access the VBT, to simplify
the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
31b410a68c x86: Add error checking for csrt table generation
Generation of this table can fail, so update the function to return an
error code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
59cf26480b x86: pinctrl: Drop the acpi_path member
This is in the device tree now, so drop the unnecessary field here.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
6b651486f5 x86: pinctrl: Set up itss in the probe() method
At present the itss is probed in the ofdata_to_platdata() method. This is
incorrect since itss is a child of p2sb which itself needs to probe the
pinctrl device. This means that p2sb is effectively not probed when the
itss is probed, so we get the wrong register address from p2sb.

Fix this by moving the itss probe to the correct place.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
a9331a3388 x86: pinctrl: Add multi-ACPI control
Add a Kconfig to control whether pinctrl is represented as a single ACPI
device or as multiple devices. In the latter case (the default) we should
return the pin number relative to the pinctrl device.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
05516e3d47 x86: pinctrl: Update comment for intel_pinctrl_get_pad()
Add information about what is returned on error.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
4916f4586e x86: pinctrl: Add a way to get the pinctrl reg address
At present we can query the offset of a pinctrl register within the p2sb.
For ACPI we need to get the actual address of the register. Add a function
to handle this and rename the old one to more accurately reflect its
purpose.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
54bcca2973 sound: Add an ACPI driver for Maxim MAX98357ac
This chip is used on coral and we need to generate ACPI tables for sound
to make it work. Add a driver that does just this (i.e. at present does
not actually support playing sound).

Signed-off-by: Simon Glass <sjg@chromium.org>
[bmeng: Use the correct acpi_irq_polarity enum number]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
0324b7123e sound: Add an ACPI driver for Dialog Semicondutor da7219
This chip is used on coral and we need to generate ACPI tables for sound
to make it work. Add a driver that does just this (i.e. at present does
not actually support playing sound).

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-17 14:32:24 +08:00
Simon Glass
7f926c9648 x86: Add support for building up an NHLT structure
The Intel Non-High-Definition-Audio Link Table (NHLT) table describes the
audio codecs and connections in a system. Various devices can contribute
information to produce the table.

Add functions to allow adding to the structure that is eventually written
to the ACPI tables. Also add the device-tree bindings.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-17 14:32:24 +08:00
Simon Glass
bb6772c3ff acpi: Support writing named values
Allow writing named integers and strings to the generated ACPI code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
[bmeng: Fix the "new blank line at EOF" warning]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
91c2f9c32e acpi: Support generation of a device
Allow writing an ACPI device to the generated ACPI code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
[bmeng: Fix build failures on Sandbox]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
70303d2480 x86: Add bindings for NHLT
Add devicetree bindings for the Intel Non-High-Definition-Audio Link Table
(NHLT).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
dba7ee419d acpi: mmc: Generate ACPI info for the PCI SD Card
Write required information into the SSDT to describe the SD card
card-detect pin. Since the required GPIO properties are not present in
the device-tree binding, set them manually for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
d7d631df2d acpi: Support generation of a generic register
Allow writing out a generic register.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
[bmeng: Fix build failures on Sandbox]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
82659cc910 acpi: Support generation of a scope
Add a function to write a scope to the generated ACPI code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: Fix build failures on Sandbox]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
fea9651084 acpi: Export functions to write sized values
At present only acpigen_write_integer() is exported for use by other code.
But in some cases it is useful to call the specific function depending on
the size of the value.

Export these functions and add a test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: Fix the "new blank line at EOF" warning]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Simon Glass
b4e8433418 dm: acpi: Add support for the NHLT table
The Intel Non-High-Definition-Audio Link Table (NHLT) table describes the
audio codecs and connections in a system. Various devices can contribute
information to produce the table.

Add core support for this, based on a structure which is built up through
calls to the driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
f18589576c dm: core: Add a way of overriding the ACPI device path
Some devices such as GPIO need to override the normal path that would be
generated by driver model. Add a device-tree property for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00
Simon Glass
f02d0eb3fa dtoc: Support ACPI paths in of-platdata
The start of an ACPI path typically has backslashes in it. These are not
preserved during the translation from device tree to C code, since dtc
(correctly) uses the first backslash as an escape character, and dtoc
therefore leaves it out of the C string.

Fix this with special-case handling.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-17 14:32:24 +08:00
Simon Glass
8d7ff12e63 acpi: Allow creating the GNVS to fail
In some cases an internal error may prevent this from working. Update the
function return value and report the error. At present the API for writing
tables does not easily support reporting errors, but once it is fully
updated to use a context pointer, this will be easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17 14:32:24 +08:00