Commit graph

1033 commits

Author SHA1 Message Date
Tom Rini
db8b46120a Xilinx changes for v2021.07
net:
 - Fix gem PCS support
 
 spi:
 - Small trivial fixes
 
 zynq:
 - Enable time/timer commands
 - Update bitmain platform
 - Several DT changes
 
 zynqmp:
 - Update clock driver
 - mini config alignments
 - Add/update psu_init for zcu208/zcu216/zc1275
 - Several DT changes
 - Enable efi debug command (also for Versal)
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYGRy+AAKCRDKSWXLKUoM
 IUN9AKCQHHdbKIciyhucUj5ThwT3CDaUswCeLQkRB1SrM6E8k6KkErWEA+xOxsU=
 =fIEs
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.07' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2021.07

net:
- Fix gem PCS support

spi:
- Small trivial fixes

zynq:
- Enable time/timer commands
- Update bitmain platform
- Several DT changes

zynqmp:
- Update clock driver
- mini config alignments
- Add/update psu_init for zcu208/zcu216/zc1275
- Several DT changes
- Enable efi debug command (also for Versal)
2021-03-31 09:47:30 -04:00
T Karthik Reddy
d999a7b7b6 spi: xilinx_spi: Trivial fixes in axi qspi driver
Use __func__ instead for function name in debug.
Use Linux style u32 instead of uint32_t.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
T Karthik Reddy
346df7d4fa spi: spi-uclass: Add support to manually relocate spi memory ops
Add spi memory operations to relocate manually when
CONFIG_NEEDS_MANUAL_RELOC is enabled.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
2021-03-27 16:26:48 +13:00
Patrice Chotard
e48ec51b43 spi: stm32_qspi: Add WATCHDOG_RESET in _stm32_qspi_read_fifo()
In case of reading large area and memory-map mode is misconfigured
(memory-map size declared lower than the real size of the memory chip)
watchdog can be triggered.

Add WATCHDOG_RESET() in _stm32_qspi_read_fifo to fix it.

Issue reproduced with stm32mp157c-ev1 board and memory map size set to
1, with following command:
sf read 0xC0000000 0 0x4000000

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-11 16:59:16 +01:00
Adam Ford
90d76f812b spi: nxp_fspi: Fix error reporting
On the i.MX8M Mini, ret = clk_set_rate() sets ret to the value of the
rate the clock was able to set.  When checking for errors, it only
checks that it is not NULL.  Since positive numbers are not errors,
only check for negative numbers when handling errors.

Fixes: 383fded70c ("spi: nxp_fspi: new driver for the FlexSPI controller")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-02-26 15:09:38 +05:30
Marek Vasut
c1d264e84e spi: imx: Implement set_speed
The set_speed() callback should configure the bus speed, make it so.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-02-26 13:25:21 +05:30
Tom Rini
cbe607b920 Xilinx changes for v2021.04-rc3
qspi:
 - Support for dual/quad mode
 - Fix speed handling
 
 clk:
 - Add clock enable function for zynq/zynqmp/versal
 
 gem:
 - Enable clock for Versal
 - Fix error path
 - Fix mdio deregistration path
 
 fpga:
 - Fix buffer alignment for ZynqMP
 
 xilinx:
 - Fix reset reason clearing in ZynqMP
 - Show silicon version in SPL for Zynq/ZynqMP
 - Fix DTB selection for ZynqMP
 - Rename zc1275 to zcu1275 to match DT name
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYDUezQAKCRDKSWXLKUoM
 IbtgAJ9jZ+BOtwFaHR19TENC2DsHTINnnwCfSDn3fU0OFJRI0HD7pRxXr4xrb3M=
 =Kr8x
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.04-rc3

qspi:
- Support for dual/quad mode
- Fix speed handling

clk:
- Add clock enable function for zynq/zynqmp/versal

gem:
- Enable clock for Versal
- Fix error path
- Fix mdio deregistration path

fpga:
- Fix buffer alignment for ZynqMP

xilinx:
- Fix reset reason clearing in ZynqMP
- Show silicon version in SPL for Zynq/ZynqMP
- Fix DTB selection for ZynqMP
- Rename zc1275 to zcu1275 to match DT name
2021-02-23 10:45:55 -05:00
Brandon Maier
d9aa19efa8 spi: zynqmp_gqspi: fix set_speed bug on multiple runs
If zynqmp_qspi_set_speed() is called multiple times with the same speed,
then on the second call it will skip recalculating the baud_rate_val as
it assumes the speed is already configured correctly. But it will still
write the baud_rate_val to the configuration register and call
zynqmp_gqspi_set_tapdelay(). Because it skipped recalculating the
baud_rate_val, it will use the initial value of 0 . This causes the
driver to run at maximum speed which for many spi flashes is too fast and
causes data corruption.

Instead only write out a new baud_rate_val if we have calculated the
correct baud_rate_val.

This opens up another issue with the "if (speed == 0)", we don't save
off the new plat->speed_hz value when setting the baud rate on the
speed=0 path. Instead mimic what the Linux zynqmp gqspi driver does, and
have speed==0 just use the same calculation as a normal speed. That will
cause the baud_rate_val to use the slowest speed possible, which is the
safest option.

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
CC: jagan@amarulasolutions.com
CC: michal.simek@xilinx.com
CC: Ashok Reddy Soma <ashokred@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23 14:56:59 +01:00
Michal Simek
9b7aac7536 clk: zynq: Add dummy clock enable function
A lot of Xilinx drivers are checking -ENOSYS which means that clock driver
doesn't have enable function. Remove this checking from drivers and create
dummy enable function as was done for clk_fixed_rate driver by
commit 6bf6d81c11 ("clk: fixed_rate: add dummy enable() function").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23 14:56:59 +01:00
Tom Rini
2ae80437fb Merge branch '2021-02-02-drop-asm_global_data-when-unused'
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-15 10:16:45 -05:00
Mathew McBride
fd20097336 spi: fsl_qspi: apply the same settings for LS1088 as LS208x
The LS1088 requires the same QUADSPI_QURIK_BASE_INTERNAL
workaround as the LS208x and also has a 64 byte TX buffer.

With the previous settings SPI-NAND reads over AHB were
corrupted.

Fixes: 91afd36f38 ("spi: Transform the FSL QuadSPI driver to use the SPI MEM API")
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:01:18 +05:30
Mathew McBride
6b4eb604ea spi: fsl_qspi: Ensure width is respected in spi-mem operations
Adapted from kernel commit b0177aca7aea
From: Michael Walle <michael@walle.cc>

Make use of a core helper to ensure the desired width is respected
when calling spi-mem operators.

Otherwise only the SPI controller will be matched with the flash chip,
which might lead to wrong widths. Also consider the width specified by
the user in the device tree.

Fixes: 91afd36f38 ("spi: Add a driver for the Freescale/NXP QuadSPI controller")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200114154613.8195-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathew McBride <matt@traverse.com.au> [adapt for U-Boot]
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:01:18 +05:30
Brandon Maier
f1fd79afad spi: zynqmp_gqspi: support dual and quad mode
The dm_spi_ops.xfer() API does not support dual and quad SPI modes. It
also doesn't allow the zynqmp_gqspi driver to calculate the correct
number of dummy cycles for some NOR ops (as doing so also requires the
buswidth).

Port the zynqmp_gqspi driver to spi_controller_mem_ops, which gives us
the buswidth values to correctly support all SNOR_PROTO_X_X_X commands
and to properly calculate dummy cycles.

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
CC: jagan@amarulasolutions.com
CC: michal.simek@xilinx.com
CC: Ashok Reddy Soma <ashokred@xilinx.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-03 13:36:44 +01:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
SkyLake.Huang
7a49d61742 spi: mtk_snor: add support for MTK SPI NOR controller
This patch adds support for MTK SPI NOR controller, which you
can see on mt7622 & mt7629.

1. This controller is designed only for SPI NOR. We can't adjust
its bus clock dynamically. Set clock in dts instead.
2. This controller only supports 1-1-1 write mode.
3. Remove mtk_snor_match_read() since upper SPI-MEM layer already
handles command.
4. sf read/write/update commands are tested with this driver.

Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
2021-01-29 10:35:14 -05:00
Tom Rini
c99be953e7 - MIPS: add support for Mediatek MT7620 SoCs
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAmAN21EACgkQKPlOlyTy
 XBgzBw/+LUzGufIop4CimnEhqrfKRuoSKinRWhx8Lo4PyjF5SAwLgIyCWY95PoQf
 eDka+Ufyj1TbvqbPR+bhJbdL7wFrku3iKE7b0Ni8AamkmsyybxAVeyByen0Q1mSF
 q4KoPhKJmpdZOfrUVrXZBBwG7/T1WTHMrCc2ZSacR0G/IeimgLplT4sRk/uG1eFo
 uiKYf0/AjD28WNvlE9Dq0EZQA+KsTe/q7GQ79nOTuxYTOjbPA59WXTOtZMo1cPgc
 GhT1EJr4N7OcGvxgkiZ8Gs4mYMbFFVvMAUNW1Bsx4v1aYJyfgP0ua58gTnWSMn69
 OJNdxTs+JYBSIZd0B8gNf0P1ZQgrGACA1Vq4O3xJUImtkzp0tMID97ZwvAdhJQbo
 MhNrWcIxijrzWDHEGhnyZ0wyqWmSwznsrvIlS9hMuIxxmnYKveTwfkCeVcvkwvn7
 Nc1Pls1Lt2ViP8/Nygc+fAMg30vtp+NvSrbA53foka62sJMqmWAjPEprPPlJV0Z2
 qGJWCxIJ/1YAUjkNrEnSo/2A3SSAM8wA1ku6aT/Ju7NZCx/3m7sYXE+wQuxYlU2I
 zxQDO+2H0v0nlVVWebQZGZx8sn6Z4O+aGCLAkpJ9tqrViJYhy0Ti2QZi0Udcl1Ny
 lADQXQM2iPoQ2zJlO4AmzXCZ7DLrKVeS3hFFiVxRWK16apckz+o=
 =fKDK
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2021-01-24' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips

- MIPS: add support for Mediatek MT7620 SoCs
2021-01-25 14:38:40 -05:00
Weijie Gao
2db6fba051 spi: add spi controller support for MediaTek MT7620 SoC
This patch adds spi controller support for MediaTek MT7620 SoC.

The SPI controller supports two chip selects. These two chip selects are
implemented as two separate register groups, but they share the same bus
(DI/DO/CLK), only CS pins are dedicated for each register group.
Appearently these two register groups cannot operates simulataneously so
they are implemented as one controller.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00
Marek Vasut
38b92ca196 spi: imx: Use clock framework if enabled
In case the clock framework is enabled, enable the SPI controller clock
and obtain max frequency from the clock framework.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-01-23 13:40:29 +01:00
Marek Vasut
6cd4f48b64 spi: imx: Define register bits in the driver
The CSPI/ECSPI register bits do not differ between newer SoCs, instead
of having multiple copies of the same thing for each iMX SoC, define
the bits in the driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-01-23 13:40:29 +01:00
Adam Ford
5fb6b82471 spi: nxp_fspi: Enable support for nxp,imx8mm-fspi
The i.MX8M Mini can use the FlexSPI driver.  Add support
for it to the driver.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-01-23 13:40:29 +01:00
Dario Binacchi
b0db69b4e1 dm: fix build errors generated by last merges
Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
 - dev_get_platdata to dev_get_plat
 - dev_get_uclass_platdata to dev_get_uclass_plat
 - ofdata_to_platdata to of_to_plat
 - plat_data_alloc_size to plat_auto
 - priv_auto_alloc_size to priv_auto
 - video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-15 13:12:38 -05:00
Patrick Delaunay
162f5888e7 spi: stm32_qspi: migrate trace to dev and log macro
Change debug/pr_* to log_* or dev_* macro and define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
7a41cb50ce spi: stm32_spi: migrate trace to dev and log macro
Change debug/pr_debug to log_debug or dev_dbg macro and
define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Vignesh Raghavendra
f3f83ad4ca spi: omap3_spi: Fix speed and mode selection
McSPI IP provides per CS specific speed and mode selection. Therefore it
is possible to apply these settings only after CS is known. But
set_speed and set_mode can be called without bus being claimed, this
would lead driver to set up wrong CS (or previously used CS).

Fix this by apply set_speed and set_mode only if bus is already claimed.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
2021-01-12 10:21:41 +05:30
Ovidiu Panait
705082d4b1 spi: ti_qspi: Fix "spi-max-frequency" error path in ti_qspi_ofdata_to_platdata
struct ti_qspi_priv->max_hz is declared as unsigned int, so the following
error path check will always be false, even when "spi-max-frequency"
property is invalid/missing:
  priv->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1);
  if (priv->max_hz < 0) {
    ...
  }

Replace the fdtdec call with dev_read_u32_default() and use 0 as the
default value. Error out if max_hz is zero.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2021-01-12 10:21:41 +05:30
Tom Rini
bc0b99bd8b Xilinx changes for v2021.04
arm64:
 - DT updates
 
 microblaze:
 - Add support for NOR device support
 
 spi:
 - Fix unaligned data write issue
 
 nand:
 - Minor code change
 
 xilinx:
 - Fru fix in limit calculation
 - Fill git repo link for all Xilinx boards
 
 video:
 - Add support for seps525 spi display
 
 tools:
 - Minor Vitis file support
 
 cmd/common
 - Minor code indentation fixes
 
 serial:
 - Uartlite debug uart initialization fix
 -----BEGIN PGP SIGNATURE-----
 
 iFsEABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX/ROlgAKCRDKSWXLKUoM
 IRC5AIkBzg4Sz8fQgdCiOK89k7tdFKMAnA9SYhgm4TSCzffZCJwnm78QoGAC
 =4FnY
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2021.04

arm64:
- DT updates

microblaze:
- Add support for NOR device support

spi:
- Fix unaligned data write issue

nand:
- Minor code change

xilinx:
- Fru fix in limit calculation
- Fill git repo link for all Xilinx boards

video:
- Add support for seps525 spi display

tools:
- Minor Vitis file support

cmd/common
- Minor code indentation fixes

serial:
- Uartlite debug uart initialization fix
2021-01-06 07:57:33 -05:00
Tom Rini
b11f634b1c Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
 dtoc: Tidy up and add more tests
 ns16550 code clean-up
 x86 and sandbox minor fixes for of-platdata
 dtoc prepration for adding build-time instantiation
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/09LURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebjwwf/fHRjYsAY/Yj/+y1xgo3L3sphIvQUqTDF
 KkLl+kHdV5r8W/HJULxLQcF2r7pcPEI6TAQxuj3qQ5SUvm2HviS8GHGPawDEwyht
 HgBp9VD56+HUadMfnbG//DVS73ycbL4XSKlYqpkINEejtnlttsCIawUXX5cTyGM/
 59VkgnKrKvJQRUXvYLa8MTugTs4fkPJGDqhActBk/7SP1SImj+rfalNSqA2/dx6y
 2RnPCSzB1x2231KSj+B1NgGlR3Xb8P8zgh20ijcEU/hrlXBTZyi7K7f4SJR30Efu
 LYkkuj4VbxcV/25RozR0fmknqCs0QyAI+/dql6TNtbTSPC/jAfj0jQ==
 =9kN3
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into next

Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
dtoc: Tidy up and add more tests
ns16550 code clean-up
x86 and sandbox minor fixes for of-platdata
dtoc prepration for adding build-time instantiation
2021-01-05 22:34:43 -05:00
Tom Rini
720620e691 Prepare v2021.01-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAl/0YVIACgkQFHw5/5Y0
 tywtEwv/cJWlKgcSnYjuJrxwuJdauUTfXdbUgtCxOtBw/BP4dsKkbGTJPw5q5M+4
 LJJSKyksmJVTX26h1dpkzQjOpWtTDnWqm5CTIxD52oQD7pxK+zCQ9T6S+QbQD0Se
 ogHmZluzFoluxbNgo8tiO52xvMhDO3TVAzxsNDdGfkd5/tAXOHClPc34RmAkdRHU
 VsR89AKdT2q543fiUfrRZYDzdctaNWhRGXMDcJ4+QU/8hQhrpcr8EtHbF+3mWX4K
 pA01pDz150Rn4UI6S2xKEWrjSTHe55fxVj/Qj0rq9z2E/+NqGXemf5s13AR0G/z3
 PqHdVLHzDe64pbOvmyU1pVQ0aMb8vMJUnqx68SQZY3On2c+MjRWQ+7aVVaKOcPGp
 uatk6QMrggHp3Li+3yZrLBE0qPr/sNMVb7mUesdZb6lFd2VIs8siwhfeGXMS+nDI
 xePzsR43Fnn5Q5KIqqvcWUb+TTTqUDUff0wyAU8NBgCaIBIZK8h2ppS1jjnbms0I
 mr8Er2vb
 =Dfum
 -----END PGP SIGNATURE-----

Merge tag 'v2021.01-rc5' into next

Prepare v2021.01-rc5

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05 16:20:26 -05:00
Simon Glass
bdf8fd76c0 dm: Rename U_BOOT_DRIVER_ALIAS to DM_DRIVER_ALIAS
We use the U_BOOT_ prefix (i.e. U_BOOT_DRIVER) to declare a driver but
in every other case we just use DM_. Update the alias macros to use the
DM_ prefix.

We could perhaps rename U_BOOT_DRIVER() to DM_DRIVER(), but this macro
is widely used and there is at least some benefit to indicating it us a
U-Boot driver, particularly for code ported from Linux. So for now, let's
keep that name.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Simon Glass
f10643cf8a dm: core: Access device ofnode through functions
At present ofnode is present in the device even if it is never used. With
of-platdata this field is not used, so can be removed. In preparation for
this, change the access to go through inline functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:41 -07:00
Simon Glass
7d14ee443c dm: core: Use dev_has_ofnode() instead of dev_of_valid()
We have two functions which do the same thing. Standardise on
dev_has_ofnode() since there is no such thing as an 'invalid' ofnode in
normal operation: it is either null or missing.

Also move the functions into one place.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-01-05 12:24:41 -07:00
Simon Glass
a53f6fad7e x86: spl: Move priv/plat structs to headers
With the new of-platdata, these need to be available to dt_platdata.c
so must be in header files. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:41 -07:00
Simon Glass
0fd3d91152 dm: Use access methods for dev/uclass private data
Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-01-05 12:24:40 -07:00
T Karthik Reddy
90217487a1 spi: zynqmp_gqspi: Fix unaligned data writes issue
When unaligned 3 bytes data write operation is performed, 3rd byte
is being over written by 1st byte of 3 bytes data. This patch
fixes it.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-04 10:51:27 +01:00
Niel Fourie
fc314300dd dm: spi: Fix spi_free_slave() freed memory write
Remove setting slave->dev to NULL after the device_remove() call.

The slave pointer points to dev->parent_priv, which has already
been freed by device_free(), called from device_remove() in the
preceding line. Writing to slave->dev may cause corruption of the
dlmalloc free chunk forward pointer of the previously freed chunk.

Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-22 20:39:26 -07:00
Ovidiu Panait
741280e9ac spi: spi-uclass: Fix spi_claim_bus() speed/mode setup logic
Currently, when different spi slaves claim the bus consecutively using
spi_claim_bus(), spi_set_speed_mode() will only be executed on the first
two calls, leaving the bus in a bad state starting with the third call.

This patch drops spi_slave->speed member and adds caching of bus
speed/mode in dm_spi_bus struct. It also updates spi_claim_bus() to call
spi_set_speed_mode() if either speed or mode is different from what the
bus is currently configured for. Current behavior is to only take into
account the speed, but not the mode, which seems wrong.

Fixes: 60e2809a84 ("dm: spi: Avoid setting the speed with every transfer")
Reviewed-by: Simon Glass <sjg@chromium.org>
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reported-by: Moshe, Yaniv <yanivmo@amazon.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-12-22 20:39:26 -07:00
Ovidiu Panait
add685fb6d test: spi: Add sandbox_spi_get_{speed, mode} interface
Introduce sandbox_spi_get_{speed, mode} public interface to retrieve the
sandbox spi bus internal state. They are meant to be used in sandbox spi
testcases.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-22 20:39:26 -07:00
Ovidiu Panait
2da1800456 spi: sandbox_spi: Implement speed/mode setup
Implement sandbox_spi_set_{speed, mode} routines, to be able to keep track
of the current bus speed/mode. This will help determine whether the values
passed from dm_spi_claim_bus() are valid.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-12-22 20:39:25 -07:00
Ovidiu Panait
1dc53ce71d sandbox: test: Add a second SPI slave on sandbox_spi bus
Place a second spi slave on the sandbox_spi bus, to be used by the
spi_claim_bus() testcase we are about to introduce. We need to make sure
that jumping between slaves calling spi_claim_bus() sets the bus speed and
mode appropriately. Use different max-hz and mode properties for this new
slave.

Also, update sandbox_spi cs_info call to allow activity on CS0/CS1 and
adapt dm_test_spi_find() testcase for this new setup.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-22 20:39:25 -07:00
Ovidiu Panait
1f6d618bb1 sandbox: spi: Drop unused sandbox_spi_parse_spec function
Commit 1289e96797 ("sandbox: spi: Drop command-line SPI option") dropped
support for specifying SPI devices on the command line, removing the only
user of sandbox_spi_parse_spec(). Remove the function too.

Fixes: 1289e96797 ("sandbox: spi: Drop command-line SPI option")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-22 20:39:25 -07:00
Simon Glass
991759196f dm: Drop the unused arg in uclass_find_device_by_seq()
Now that there is only one sequence number (rather than both requested and
assigned ones) we can simplify this function. Also update its caller to
simplify the logic.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
6d83c74db7 spi: Update for new sequence numbers
Use the new sequence number in all cases. Drop the rockchip case because
the sequence number should be 0 anyway, and assigning to the sequence
number is not permitted.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
8b85dfc675 dm: Avoid accessing seq directly
At present various drivers etc. access the device's 'seq' member directly.
This makes it harder to change the meaning of that member. Change access
to go through a function instead.

The drivers/i2c/lpc32xx_i2c.c file is left unchanged for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Pengpeng Chen
24f2794232 spi: ca_sflash: Add CAxxxx SPI Flash Controller
Add SPI Flash controller driver for Cortina Access
CAxxxx SoCs

Signed-off-by: Pengpeng Chen <pengpeng.chen@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Vignesh R <vigneshr@ti.com>
CC: Tom Rini <trini@konsulko.com>
[jagan: rebase on master]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Sean Anderson
fec7bf0460 spi: dw: Add mem_ops
The designware ssi device has "broken" chip select behaviour [1], and needs
specific manipulation to use the built-in chip select. The existing fix is
to use an external GPIO for chip select, but typically the K210 has SPI3
directly connected to a flash chip with dedicated pins. This makes it
impossible to use the spi_xfer function to use spi, since the CS is
de-asserted in between calls.  This patch adds an implementation of
exec_op, which gives correct behaviour when reading/writing spi flash.

This patch also rearranges the headers to conform to U-Boot style.

[1] https://lkml.org/lkml/2015/12/23/132

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Sean Anderson
58875790fd spi: dw: Add support for multiple CTRLR0 layouts
CTRLR0 can have several different layouts depending on the specific device
(dw-apb-ssi vs dwc-ssi), and specific parameters set during synthesis.
Update the driver to support three specific configurations: dw-apb-ssi with
SSI_MAX_XFER_SIZE=16, dw-apb-ssi with SSI_MAX_XFER_SIZE=32, and dwc-ssi.

dw-apb-ssi is the version of the device on Altera/Intel SoCFPGAs, MSCC
SoCs, and Canaan Kendryte K210 SoCs. This is the only version this driver
supported before this change. The register layout before version 3.23a is:

|   31 .. 16  |
| other stuff |

|   15 .. 10  | 9 .. 8 | 7 .. 6 | 5 .. 4 | 3 .. 0 |
| other stuff |  TMOD  |  MODE  |  FRF   |  DFS   |

Note that DFS (Data Frame Size) is only 4 bits, limiting transfers to data
frames of 16 bits or less.

In version 3.23a, the SSI_MAX_XFER_SIZE parameter was introduced. This
parameter defaults to 16 (resulting in the same layout as prior versions),
but may also be set to 32. To allow setting longer data frame sizes, a new
DFS_32 register was introduced:

|   31 .. 21  | 20 .. 16 |
| other stuff |  DFS_32  |

|   15 .. 10  | 9 .. 8 | 7 .. 6 | 5 .. 4 |  3 .. 0   |
| other stuff |  TMOD  |  MODE  |  FRF   | all zeros |

The old DFS field no longer controls the data frame size. To detect this
layout, we try writing 0xF to DFS. If we read back 0x0, then this device
has SSI_MAX_XFER_SIZE=32.

dwc-ssi is the version of the device on Intel Keem Bay SoCs and Canaan
Kendryte K210 SoCs. The layout of ctrlr0 is:

|   31 .. 16  |
| other stuff |

|   15 .. 12  | 11 .. 10 | 9 .. 8 | 7 .. 6 | 4 .. 0 |
| other stuff |   TMOD   |  MODE  |  FRF   | DFS_32 |

The semantics of the fields have not changed since the previous version.
However, SSI_MAX_XFER_SIZE is effectively always 32.

To support these different layouts, we model our approach on the one
which the Linux kernel has taken. During probe, the driver calls an init
function stored in driver_data. This init function is responsible for
determining the layout of CTRLR0, and supplying the update_cr0 function.

The style of and information behind this commit is based on the Linux MMIO
driver for these devices. Specific reference was made to the series adding
support for Intel Keem Bay SoCs [1].

[1] https://lore.kernel.org/linux-spi/20200505130618.554-1-wan.ahmad.zainie.wan.mohamad@intel.com/

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Sean Anderson
ddd3450f39 spi: dw: Rearrange struct dw_spi_priv
This should reduce the size of the struct, and also groups more similar
fields together.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Sean Anderson
934beab882 spi: dw: Remove spi_enable_chip
This function does nothing but wrap dw_write.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Sean Anderson
3004034989 spi: dw: Rename registers to match datasheet
A few registers had slightly different names from what is in the datasheet.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Sean Anderson
c785f43ffd spi: dw: Use generic function to read reg address
Using an fdt-specific function causes problems when compiled with a live
tree.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:36 +05:30