Commit graph

4326 commits

Author SHA1 Message Date
Tom Rini
4125bbcef6 Merge branch 'master' of git://git.denx.de/u-boot-mmc
- Add #undef CONFIG_DM_MMC_OPS to omap3_logic in the SPL build case, to
  match other TI platforms in the same situation.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-16 08:10:50 -04:00
Tom Rini
d09ec7f816 Merge branch 'master' of git://git.denx.de/u-boot-video 2017-05-15 20:16:02 -04:00
Philipp Tomsich
10ba6b3339 video: bmp: rename CONFIG_BMP_24BMP to CONFIG_BMP_24BPP
Due to a typo, the 24 bit-per-pixel configuration ends in 24BMP
instead of 24BPP. This change renames it throughout the source tree
for consistency and to make moving these options into Kconfig easier
and less error-prone.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2017-05-15 20:55:13 +02:00
Jernej Skrabec
43c6bdd020 edid: Add HDMI flag to timing info
Some DVI monitors don't show anything in HDMI mode since audio stream
confuses them. To solve this situation, this commit adds HDMI flag in
timing data and sets it accordingly during edid parsing.

First existence of extension block is checked. If it exists and it is
CEA861 extension, then data blocks are checked for presence of HDMI
vendor specific data block. If it is present, HDMI flag is set.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-15 20:32:12 +02:00
Jernej Skrabec
dc8cae4df3 edid: Set timings flags according to edid
Timing flags are never set, so they may contain garbage. Since some
drivers check them, video output may be broken on those drivers.

Initialize them to 0 and check for few common flags.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-15 20:28:12 +02:00
Tom Rini
cb33bda44f Merge branch 'master' of git://git.denx.de/u-boot-i2c 2017-05-15 13:01:26 -04:00
Tom Rini
8850c5d57c Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD
In order to be able to migrate the various SoC EHCI CONFIG options we
first need to finish the switch from CONFIG_USB_EHCI to
CONFIG_USB_EHCI_HCD.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15 10:40:05 -04:00
Angelo Dureghello
0ce452872f board_f: skip timer_init() on Coldfire archs
Coldfire arch is not happy with timer_init since interrupt handlers
are still not set at that stage, and the boot hangs silently.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-05-15 10:38:09 -04:00
Kever Yang
bcc1726a7b spl: add support to booting with ATF
ATF(ARM Trusted Firmware) is used by ARM arch64 SoCs, find more infomation
about ATF at: https://github.com/ARM-software/arm-trusted-firmware

SPL is considered as BL2 in ATF terminology, it needs to load other parts
of ATF binary like BL31, BL32, SCP-BL30, and BL33(U-Boot). And needs to
prepare the parameter for BL31 which including entry and image information
for all other images. Then the SPL handle PC to BL31 with the parameter,
the BL31 will do the rest of work and at last get into U-Boot(BL33).

This patch needs work with patches from Andre for SPL support multi
binary in FIT.

The entry point of bl31 and bl33 are still using hard code because we
still can not get them from the FIT image information.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-15 10:38:09 -04:00
Masahiro Yamada
792f0054a4 mmc: descend into drivers/mmc only when CONFIG_MMC is enabled
This simplifies makefiles.  Also, arrange the order of objects in
drivers/mmc/Makefile so that the framework objects are listed before
drivers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-15 18:28:23 +09:00
Masahiro Yamada
4aa2ba3a34 mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC
Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig.
We do not need two options for the same feature.  Deprecate the
former.

This commit was generated with the sed script 's/GENERIC_MMC/MMC/'
and manual fixup of drivers/mmc/Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-15 18:28:23 +09:00
Simon Glass
213f27f3f9 Drop CONFIG_I2CFAST
This option is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-15 06:19:00 +02:00
Simon Glass
69153988a6 i2c: Finish dropping use of CONFIG_I2C_HARD
Drop use of this long-deprecated option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-15 06:18:30 +02:00
Tom Rini
82b9dc63db common: Only build cli_readline.o for CMDLINE on non-SPL
With gcc-6 and later we may get a warning such as:
.../common/cli_readline.c:20:21: warning: ‘tab_seq’ defined but not used [-Wunused-const-variable=]
 static const char   tab_seq[] = "        "; /* used to expand TABs */
                     ^~~~~~~
.../common/cli_readline.c:19:19: warning: ‘erase_seq’ defined but not used [-Wunused-const-variable=]
 static const char erase_seq[] = "\b \b"; /* erase sequence */
                   ^~~~~~~~~

Because in SPL we're normally not doing interactive commands anyhow, so
lets just not compile this at all in SPL.  This also means that we need
to correct the logic (and comment) about what the drivers/ddr/fsl/ and
CONFIG_FSL_DDR_INTERACTIVE requires and this will be included in SPL
there.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-12 08:37:33 -04:00
xypron.glpk@gmx.de
902f5bcfbc env: avoid possible NULL pointer access
env_attr_lookup call env_attr_walk with
callback = regex_callback.

In env_attr_walk
attributes = strchr(entry_cpy, ENV_ATTR_SEP)
will return NULL if ENV_ATTR_SEP is not found.

In the aftermath regex_callback may call
strlen(attributes)
with a NULL value which will lead to a failure.

The problem was indicated by scan-clam.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-05-12 08:37:17 -04:00
xypron.glpk@gmx.de
9b57e252ff env: correct sign for error code
Error codes should be negative.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-05-12 08:37:16 -04:00
B, Ravi
66928afb6b common: dfu: ignore reset for spl-dfu
The SPL-DFU feature enable to load and
execute u-boot from RAM over usb from
PC using dfu-util.
Hence dfu-reset should not be issued
when dfu-util -R switch is issued.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
2017-05-12 08:37:09 -04:00
B, Ravi
1b19cbdbf7 spl: Kconfig: dfu: spl-dfu depends on SPL_RAM_SUPPORT
Since SPL_DFU_SUPPORT is depends on SPL_RAM_SUPPORT,
hence select SPL_DFU_SUPPORT only when
SPL_RAM_SUPPORT is chosen.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-12 08:37:09 -04:00
B, Ravi
6e7585bb64 boot: fdt: Perform arch_fixup_fdt() on the given device tree for falcon boot
In single stage bootmode or falcon boot mode, the SPL shall update the
device tree that we load with the normal fixups done via
arch_fixup_fdt(), when possible (ie we have enough information in this
restricted environment to be able to do that still).  This will include
for example updating them memory nodes.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
[trini: Reword commit message]
2017-05-11 22:21:26 -04:00
B, Ravi
984a3c8777 spl: fdt: support for fdt fixup for falcon boot
Adding support for fdt fixup to update the
memory node in device tree for falcon boot.

This is needed for single stage or falcon
bootmode, to pass memory configuration to
kernel through DT memory node.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-05-11 22:04:26 -04:00
Lokesh Vutla
15eb1d43bf spl: reorder the assignment of board info to global data
Move the assignment of board info to global data a bit early which is
safe,
so that ram details can be used to enable caches.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-11 22:03:41 -04:00
Philipp Tomsich
2bac55bc16 spl: spi: override CONFIG_SYS_SPI_U_BOOT_OFFS via /config-property
For the RK3399-Q7, we need some flexibility (depending on the feature
set we include in the SPL stage and how large our SPI flash is) in
positioning the SPL payload (i.e. the FIT image containing U-Boot, ATF
and the M0 payload) in our SPI flash.

To avoid having to deal with this through different U-Boot images, we
introduce a the '/config/u-boot,spl-payload-offset' property node
allow it to override the default setting.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-05-11 22:03:39 -04:00
Alex Deymo
88b6329cce disk: Return the partition number in part_get_info_by_name()
Similar to what blk_get_device_part_str() does, this patch makes
part_get_info_by_name() return the partition number in case of a match.
This is useful when the partition number is needed and not just the
descriptor.

Signed-off-by: Alex Deymo <deymo@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-11 22:03:37 -04:00
Alex Deymo
210a7176ee image: Update include/android_image.h
Update the Android image header format to the latest version published
in AOSP. The original code moved to a new repository, so this patch also
updates the reference to that path.

Signed-off-by: Alex Deymo <deymo@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-11 22:03:37 -04:00
Simon Glass
d08e42a8cb dm: video: Add driver-model support to lcd_simplefb
Allow this to work with CONFIG_DM_VIDEO enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2017-05-09 20:20:41 -04:00
Simon Glass
452614556c dm: video: Refactor lcd_simplefb to prepare for driver model
Adjust this function so that we can convert it to support CONFIG_DM_VIDEO
without a lot of code duplication.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2017-05-09 20:20:40 -04:00
Jean-Jacques Hiblot
d52063b84f scsi: dm: split scsi_scan()
The DM version of scsi_scan() is becoming a bit long, it can be split:
scsi_scan() iterates over the IDs and LUNs and for each id/lun pair calls
do_scsi_scan_one() to do the work of:
 - detecting an attached drive
 - creating the associated block device if a drive is found.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09 12:14:16 -06:00
Tom Rini
2f92629112 Merge branch 'next' of git://git.denx.de/u-boot-spi 2017-05-08 15:44:52 -04:00
Vikas Manocha
5bf5250e9d spl: make image arg or fdt blob address reconfigurable
At present fdt blob or argument address being passed to kernel is fixed at
compile time using macro CONFIG_SYS_SPL_ARGS_ADDR. FDT blob from
different media like nand, nor flash are copied to the address pointed
by the macro.
The problem is, it makes args/fdt blob compulsory to copy which is not required
in cases like for NOR Flash. This patch removes this limitation.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-08 11:38:40 -04:00
Andreas Fenkart
0b2e5bbe6a env_sf: use DIV_ROUND_UP to calculate number of sectors to erase
simpler to read

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-03 11:18:20 +05:30
Andreas Fenkart
c041c60c6c env_sf: re-order error handling in single-buffer env_relocate_spec
this makes it easier comparable to the double-buffered version

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-03 11:18:06 +05:30
Andreas Fenkart
8fee8845e7 enf_sf: reuse setup_flash_device instead of open coding it
setup_flash_device selects one of two code paths depending on the driver
model being used (=CONFIG_DM_SPI_FLASH). env_relocate_spec only used
the non driver-model code path. I'm unsure why, either none of the
platforms that need relocation use the driver model, or - worse - the
driver model is not yet usable when relocating.

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-03 11:17:54 +05:30
Andreas Fenkart
afa81a7750 env_sf: factor out prepare_flash_device
copy&paste code found in single/double buffered code path

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
2017-05-03 11:17:10 +05:30
Tom Rini
26d61195f8 fdt: Move fdt_fixup_ethernet to a common place
With 3f66149d9f we no longer have a common call fdt_fixup_ethernet.
This was fine to do on PowerPC as they largely had calls already in
ft_cpu_fixup.  On ARM however we largely relied on this call.  Rather
than introduce a large number of changes to ft_cpu_fixup /
ft_board_fixup we recognize that this is a common enough call that we
should be doing it in a central location.  Do it early enough that we
can do any further updates in ft_cpu_fixup / ft_board_fixup.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thomas Chou <thomas@wytron.com.tw> (maintainer:NIOS)
Cc: York Sun <york.sun@nxp.com> (maintainer:POWERPC MPC85XX)
Cc: Stefan Roese <sr@denx.de> (maintainer:POWERPC PPC4XX)
Cc: Simon Glass <sjg@chromium.org>
Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Fixes: 3f66149d9f ("Remove extra fdt_fixup_ethernet() call")
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: York Sun <york.sun@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-01 09:11:59 -04:00
Jean-Jacques Hiblot
4e27b9a584 dm: scsi: fix divide-by-0 error in scsi_scan()
With DM_SCSI enabled, blk_create_devicef() is called with blkz = 0, leading
to a divide-by-0 exception.
scsi_detect_dev() can be used to get the required parameters (block size
and number of blocks) from the drive before calling blk_create_devicef().

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-14 19:38:57 -06:00
Jean-Jacques Hiblot
1330a726ff scsi: move the partition initialization out of the scsi detection
We might want to get information about the scsi device without initializing the partition.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-14 19:38:57 -06:00
Jean-Jacques Hiblot
e39cecfdaf scsi: make the LUN a parameter of scsi_detect_dev()
This is a cosmetic change. target and LUN have kind of the same role in
this function. One of them was passed as a parameter and the other was
embedded in a structure. For consistency, pass both of them as parameters.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-14 19:38:57 -06:00
Tom Rini
bdf1ea11c8 Merge branch 'master' of git://git.denx.de/u-boot-usb 2017-04-14 10:58:49 -04:00
Troy Kisky
1e5eca7d42 usb: return 0 from usb_stor_get_info even if removable media
This fixes a regression caused by

commit 07b2b78ce4
    dm: usb: Convert USB storage to use driver-model for block devs

which caused part_init to be called when it was not previously.
Without this patch, the following happens when a USB sd card reader is used.

=> usb start
starting USB...
USB0:   Port not available.
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 3 USB Device(s) found
       scanning usb for storage devices... Device NOT ready
   Request Sense returned 02 3A 00
 ### ERROR ### Please RESET the board ###

This happens because dev_desc->blksz is 0.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2017-04-14 16:44:17 +02:00
Simon Glass
f1683aa73c board_f: Rename initdram() to dram_init()
This allows us to use the same DRAM init function on all archs. Add a
dummy function for arc, which does not use DRAM init here.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Dummy function on nios2]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-13 09:40:57 -04:00
Stefano Babic
9d80b49a67 env: split fw_env.h in public and private parts
Move U-Boot private data into a separate file. This
lets export fw_env.h to be used by external programs
that want to change the environment using the library
built in tools/env.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2017-04-12 13:28:28 -04:00
Stefano Babic
b80c0b9934 Rename aes.h to uboot_aes.h
aes.h is a too generic name if this file can
be exported and used by a program.
Rename it to avoid any conflicts with
other files (for example, from openSSL).

Signed-off-by: Stefano Babic <sbabic@denx.de>
2017-04-12 13:28:27 -04:00
Andrew F. Davis
6dca5e8ab5 spl: net: Add FIT image support over network boot
FIT support in the net boot case is much like the RAM boot case in that
we load our image to "load_addr" and pass a dummy read function into
"spl_load_simple_fit()". As the load address is no longer hard-coded to
the final execution address, legacy image loading will require load_addr
to be set correctly in the image header.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-08 21:35:08 -04:00
Tom Rini
089795090a Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2017-04-08 09:28:02 -04:00
Alexandru Gagniuc
b09ece0836 common/xyzModem.c: Do not use hard-coded address for debug buffer
Under the plethora of #ifdefs, the xyzModem code hid this pearl:
static char *zm_out = (char *) 0x00380000;
This was only enabled when DEBUG is defined, so it's probably why it
went unnoticed for so long. No idea what platform had memory at that
exact location, but the this approach is extremely hacky.
Use a static buffer instead.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-04-08 09:26:55 -04:00
Alexandru Gagniuc
306b236bc1 common/xyzModem.c: unifdef (Remove useless #ifdefs)
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-04-08 09:26:54 -04:00
Alexandru Gagniuc
0dcf18c69d spl: Kconfig: SPL_MMC_SUPPORT depends on GENERIC_MMC
spl_mmc.c calls mmc_initialize(). This symbol is provided in
drivers/mmc/mmc.c when CONFIG_GENERIC_MMC is enabled.
The sunxi Kconfig case is an oddball because it redefines
SPL_MMC_SUPPORT.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
[trini: Update arch/arm/cpu/armv8/zynqmp/Kconfig]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-08 09:26:54 -04:00
Nobuhiro Iwamatsu
fad6a2b771 common, kconfig: Fix defaut value of BOOTSTAGE_STASH_SIZE
The default value of BOOTSTAGE_STASH_SIZE should be set to hexadecimal,
but an integer value is set. This fixes the BOOTSTAGE_STASH_SIZE number
from hexadecimal to integer.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-04-08 09:26:53 -04:00
Vikas Manocha
634fcf0848 spl: armv7m: keep ARM v7M in thumb mode while jumping to entry point
On ARM v7M, the processor will return to ARM mode when executing blx
instruction with bit 0 of the address == 0. Always set it to 1 to stay
in thumb mode.

Similar commit:
f99993c108
Author: Matt Porter <mporter@konsulko.com>
Date:   Tue May 5 15:00:23 2015 -0400
common/cmd_boot: keep ARM v7M in thumb mode during do_go_exec()

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-04-08 09:26:53 -04:00
Joakim Tjernlund
3f66149d9f Remove extra fdt_fixup_ethernet() call
ft_cpu_setup() already calls fdt_fixup_ethernet(), calling it
in image_setup_libfdt() is both redundant and breaks any modifications
done by ft_board_setup(). Restore the old behavior by removing
the call in image_setup_libfdt()

Fixes: 13d06981a9 ("image: Add device tree setup to image library")
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
2017-04-08 09:26:50 -04:00