Commit graph

76 commits

Author SHA1 Message Date
Simon Glass
38f159c05b buildman: Show the build rate at the end
It is interesting to note the number of builds completed per second to
track machine performance and build speed. Add a 'rate' value at the end
of the build to show this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-28 19:30:39 -06:00
Ovidiu Panait
7664b03ffc buildman: Remove _of_#_ from results directory paths
Currently, the following scenario will rebuild the first commit even
though it is not really necessary - the commit sha or the position in the
patchset did not change:

$ git am <local-patch-0001>
$ tools/buildman/buildman -P -E -W -b master mx6
<do some more development work>
$ git am <local-patch-0002>
$ tools/buildman/buildman -P -E -W -b master mx6 <- will rebuild the first
						    commit as well, even
						    though nothing has
						    changed about it.

This is due to the fact that previous results directories get removed
when the number of commits change. By removing the _of_#_ part of the
directory path, the commits will be rebuilt only if the commit sha or the
position in the patchset changes. Also, update the testcase to reflect this
change.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-06-11 20:52:11 -06:00
Simon Glass
bf776679a7 patman: Move to absolute imports
At present patman sets the python path on startup so that it can access
the libraries it needs. If we convert to use absolute imports this is not
necessary.

Move patman to use absolute imports. This requires changes in tools which
use the patman libraries (which is most of them).

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-26 14:25:21 -06:00
Simon Glass
0ede00fdaf buildman: Move to absolute imports
At present buildman sets the python path on startup so that it can access
the libraries it needs. If we convert to use absolute imports this is not
necessary.

Move buildman to use absolute imports. Also adjust moveconfig.py too since
it uses some buildman modules and cannot work without this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-26 14:25:21 -06:00
Simon Glass
60b285f8c3 buildman: Write output files when using -w
At present buildman does not write its own output files (err, done, the
environment) when using -w. However this is useful for when the build is
run with -s to check it.

In fact ProduceResultSummary() reads the result from those files rather
than using the 'result' info directly. So ProcessResult() does not work
with -w at present. It does not print any output.

Fix this by writing output files even when -w is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-26 14:24:08 -06:00
Simon Glass
113a8a5ff3 buildman: Add an option to ignore migration warnings
These are becoming more common now. They cause boards to show warnings
which can be mistaking for compiler warnings.

Add a buildman option to ignore them. This option works only with the
summary option (-s). It does not affect the build process.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
174592b964 buildman: Add an option to ignore device-tree warnings
Unfortunately the plague of device-tree warnings has not lifted. These
warnings infiltrate almost every build, adding noise and confusion.

Add a buildman option to ignore them. This option works only with the
summary option (-s). It does not affect the build process.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
eb70a2c059 buildman: Make -I the default
At present buildman defaults to running 'mrproper' on every thread before
it starts building commits for each board. This can add a delay of about 5
seconds to the start of the process, since the tools and other invariants
must be rebuilt.

In particular, a build without '-b', to build current source, runs much
slower without -I, since any existing build is removed, thus losing the
possibility of an incremental build.

Partly this behaviour was to avoid strange build-system problems caused by
running 'make defconfig' for one board and then one with a different
architecture. But these problems were fixed quite a while ago.

The -I option (which disabled mrproper) was introduced four years ago and
does not seem to cause any problems with builds.

So make -I the default and deprecate the option. To allow use of
'mrproper', add a new -m flag.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
7b33f21804 buildman: Show a summary of the build result
When buildman finishes it leaves the last summary line visible, which
shows the number of successful builds, builds with warnings and builds
with errors.

It is useful also to see how many builds were done in total along with
the time taken. Show these on a separate line before buildman finishes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
95ed0a2dbf buildman: Limit the length of progress messages
If a progress message is longer than the terminal line it will scroll the
terminal. Limit the messages to the terminal width.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
6eb76cac1c buildman: Show the number of builds remaining
It is nice to see the actual number of builds remaining to complete. Add
this in the progress message, using a different colour.

Drop the unnecessary 'name' variable while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
edae4ad3bc buildman: Drop unused output code
The commit counter is a hangover from when buildman processed each board
for a commit. Now buildman processes each commit for a board, so this
output is never triggered.

Delete it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
212c0b8170 buildman: Show a message when fetching a repo
Fetching updated versions of a repo can take time. At present buildman
gives no indication that it is doing this.

Add a message to explain the delay.

Tidy up a few other messages while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
102969bb2c buildman: Drop the line-clearing code in Builder
The new feature in terminal can be used by buildman. Update the Builder
class accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
9ef0ceb730 buildman: Use spaces in the board list
At present the board names shown with -l are separated by commas. This
makes it hard to double-click to select a particular board. Also it is not
possible to select all boards and paste them as arguments to a subsequent
buildman run, since buildman requires spaces to separate the list on the
command line, not commas.

Change the output format to use spaces instead of commas.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
8c9a2674ee buildman: Show the list of boards in magenta
It is quite hard to see the list of board for each error line since the
colour is the same as the actual error line. Show the board list in
magenta so that it is easier to distinguish them.

There is no point in checking the colour of the overall line, since there
are now multiple colours. So drop those tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
35d696dbe5 buildman: Use an object to hold error lines
At present the string for each error line is created in _CalcErrorDelta()
and used to create the summary output. This is inflexible since all the
information (error/warning character, error line, list of boards with that
error line) is munged together in a string.

Create an object to hold this information and only convert it to a string
when printing the actual output.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
5627bd9d96 buildman: Use yellow consistently for warning lines
At present warnings are shown in yellow in the summary (-s) but magenta in
the detail listing (-e). Use yellow in both.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
b206d87d52 buildman: Refactor error-line output int a function
Reduce the amount of repeated code by creating an _OutputErrLines()
function to hold this code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21 06:33:47 -06:00
Simon Glass
b2d89bc538 buildman: Allow building within a subdir of the current dir
This is useful in some situations, in particular with -w and when building
in-tree. Now that we are more careful about what we remove in
_PrepareOutputSpace(), it should be safe to relax this restriction.

Update the progress information also so it is clear what buildman is
doing. Remove files can take a long time.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-10 21:21:06 -04:00
Simon Glass
925f6adfa5 buildman: Be more selective about which directories to remove
At present buildman removes any directory it doesn't intend to write
output into. This is overly expansive since if the output directory
happens to be somewhere with existing files, they may be removed. Using
an existing directory for buildman is not a good practice, but since the
result might be catastrophic, it is best to guard against it.

A previous commit[1] fixed this by refusing to write to a subdirectory
of the current directory, assumed to have U-Boot source code. But we can
do better by only removing directories that look like the ones buildman
creates.

Update the code to do this and add a test.

Signed-off-by: Simon Glass <sjg@chromium.org>

[1] 409fc029c4 tools: buildman: Don't use the working dir as build dir
2020-04-10 21:21:06 -04:00
Simon Glass
f9c094bbce buildman: Update help for -d
This help is a bit ambiguous. It only does anything if asked to show size
changes with -S. Update the help and the function comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-10 21:21:06 -04:00
Simon Glass
d829f1217c bulidman: Add support for a simple build
It is useful to run a simple build and put all the output in a single
directory. Add a -w option to support this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-10 21:21:06 -04:00
Flavio Suligoi
9de5c397b2 tools: buildman: fix typo
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-30 13:30:35 -05:00
Tom Rini
d08c38c32f buildman: Ignore blank lines during size checks
Today when parsing the .sizes files we get a warning about an invalid
line in the file as it's blank.  Solve this by checking that we have a
non-blank line prior to processing.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-12-10 21:11:31 -07:00
Simon Glass
c05aa03642 buildman: Convert to Python 3
Convert buildman to Python 3 and make it use that, to meet the 2020
deadline.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04 18:15:32 -07:00
Simon Glass
347ea0b63e buildman: Deal more nicely with invalid build-status file
The 'done' files created by buildman may end up being empty if buildman
runs out of disk space while writing them. At present buildman dies with
an exception when using -s to check the build status. Fix this.

Seriesl-cc: trini

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-05-21 17:33:23 -06:00
Simon Glass
6af7101b75 buildman: Show boards with warning with w+
At present we should boards with warnings in the same way as those with
errors. This is not ideal. Add a new 'warn' state and show these listed
in yellow to match the actual warning lines printing with -e.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20 19:14:22 -07:00
Simon Glass
4cf2b221c6 buildman: Rename the good, better, worse variables
At present we don't distinguish between errors and warnings when printing
the architecture summary. Rename the variables to better describe their
purpose.

'Worse' at present means we got an error, so use that as the name.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20 19:14:22 -07:00
Simon Glass
2d48333e44 buildman: Detect dtc warnings
At present messages from the device-tree compiler like this:

  arch/arm/dts/socfpga_arria10_socdk_sdmmc.dtb: Warning
     (avoid_unnecessary_addr_size): /clocks: unnecessary
     #address-cells/#size-cells without "ranges" or child "reg" property

are detected as errors since they don't match the gcc warning regex. Add a
new one for dtc to fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20 19:14:22 -07:00
Simon Glass
e62a24ce27 buildman: Avoid hanging when the config changes
Something has changed in the last several month such that when buildman
builds U-Boot incrementally and a new CONFIG option has been added to the
Kconfig, the build hanges waiting for input:

    Test new config (NEW_CONFIG) [N/y/?] (NEW)

Since binamn does not connect the build's stdin to anything this waits on
stdin to the build thread, which never comes. Eventually I suspect all the
threads end up in this state and the build does not progress.

Fix this by passing /dev/null as input to the build. That way, if there is
a new CONFIG, the build will stop (and fail):

    Test new config (NEW_CONFIG) [N/y/?] (NEW)

    Error in reading or end of file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-29 11:49:35 -06:00
Alex Kiernan
48ae412424 buildman: Add support for environment delta in summary
When summarising the builds, add the -U option to emit delta lines for
the default environment built into U-Boot at each commit.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-07 11:25:07 -08:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Daniel Schwierzeck
2371d1bcbf buildman: add option -E for treating compiler warnings as errors
Add a new option '-E' for treating all compiler warnings as errors.
Eventually this will pass 'KCFLAGS=-Werror' to Kbuild.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-02-04 22:55:34 -05:00
Tom Rini
d5686a61d6 buildman: Fix bloat option when 'new' only drops functions
In the case where a new build only decreases sizes and does not increase
any size we still want to report what functions have been dropped when
doing a bloat comparison.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-08 20:21:59 -06:00
Simon Glass
9a6d2e2a6b buildman: Handle commit subjects containing unicode
One of these has crept in in this commit:

40a808f1 ARCv2: SLC: Make sure busy bit is set properly on SLC flushing

Adjust buildman to handle it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-13 14:44:49 -06:00
Simon Glass
960421ecb3 buildman: Clean up odd characters on the terminal
At present buildman leaves behind a few characters during its progress
updates, which looks odd. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
Simon Glass
b464f8e7de buildman: Squash useless output from -K
When using #define CONFIG_SOME_OPTION, the value it set to '1'. When using
defconfig (i.e. CONFIG_SOME_OPTION=y) the value is set to 'y'. This results
in differences showing up with -K. These differences are seldom useful.

Adjust buildman to suppress these differences by default.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
Simon Glass
b50113f373 buildman: Add an option to just create the config
Normally buildman does a full build of a board. This includes creating the
u-boot.cfg file which contains all the configuration options. Buildman uses
this file with the -K option, to show differences in effective configuration
for each commit.

Doing a full build of U-Boot just to create the u-boot.cfg file is wasteful.
Add a -D option which causes buildman to only create the configuration. This
is enough to support use of -K and can be done much more quickly (typically
5-10 times faster).

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
Simon Glass
2f2566482f buildman: Don't show a stacktrace on Ctrl-C
When Ctrl-C is pressed, just exited quietly. There is no sense in displaying
a stack trace since buildman will always be in the same place: waiting for
threads to complete building all the jobs on the queue.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
63781bd65e buildman: Drop the 'active' flag in the builder
This serves no real purpose, since when we are not active, we exit. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
d436e38189 buildman: Allow builds to terminate cleanly
It is annoying that buildman does not respond cleanly to Ctrl-C or SIGINT,
particularly on machines with lots of CPUS. Unfortunately queue.join()
blocks the main thread and does not allow it to see the signal. Use a
separate thread instead,

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
745b395aef buildman: Print a message indicating the build is starting
Make it clear when buildman actually starts building. This happens when it
has prepared the threads, working directory and output directories.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
b222abe736 buildman: Print a message when removing old directories
When buildman starts, it prepares its output directory by removing any old
build directories which will not be used this time. This can happen if a
previous build left directories around for commit hashes which are no-longer
part of the branch.

This can take quite a while, so print a message to indicate what is going
on.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Simon Glass
21f0eb332f buildman: Tidy up the 'cloning' message
On a machine with a lot of CPUs this prints a lot of useless lines of the
form:

   Cloning repo for thread <n>

Adjust the output so that these all appear on one line, and disappear when
the cloning is complete.

Note: This cloning is actually unnecessary and very wasteful on disk space
(about 3.5GB each time). It would be better to create symlinks.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-09 09:30:32 -06:00
Stephen Warren
f79f1e0c0e buildman: allow more incremental building
One use-case for buildman is to continually run it interactively after
each small step in a large refactoring operation. This gives more
immediate feedback than making a number of commits and then going back and
testing them. For this to work well, buildman needs to be extremely fast.
At present, a couple issues prevent it being as fast as it could be:

1) Each time buildman runs "make %_defconfig", it runs "make mrproper"
first. This throws away all previous build results, requiring a
from-scratch build. Optionally avoiding this would speed up the build, at
the cost of potentially causing or missing some build issues.

2) A build tree is created per thread rather than per board. When a thread
switches between building different boards, this often causes many files
to be rebuilt due to changing config options. Using a separate build tree
for each board would avoid this. This does put more strain on the system's
disk cache, but it is worth it on my system at least.

This commit adds two command-line options to implement the changes
described above; -I ("--incremental") turns of "make mrproper" and -P
("--per-board-out-dir") creats a build directory per board rather than per
thread.

Tested:

    ./tools/buildman/buildman.py tegra
    ./tools/buildman/buildman.py -I -P tegra
    ./tools/buildman/buildman.py -b tegra_dev tegra
    ./tools/buildman/buildman.py -b tegra_dev -I -P tegra

... each once after deleting the buildman result/work directory, and once
"incrementally" after a previous identical invocation.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org> # v1
Tested-by: Simon Glass <sjg@chromium.org> # v1
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
8270e3c12e buildman: Improve the config comparison feature
At present buildman can compare configurations between commits but the
feature is less useful than it could be. There is no summary by architecture
and changes are not reported on a per-board basis.

Correct these deficiencies so that it is possible to see exactly what is
changing for any number of boards.

Note that 'buildman -b <branch> -C' is recommended for any build where you
will be comparing configuration. Without -C the correct configuration will
not be reported since changes will often not be picked up.

Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-09 07:48:03 -06:00
Simon Glass
843312dcdd buildman: Allow comparison of build configuration
It is useful to be able to see CONFIG changes made by commits. Add this
feature to buildman using the -K flag so that all CONFIG changes are
reported.

The CONFIG options exist in a number of files. Each is reported
individually as well as a summary that covers all files. The output
shows three parts: green for additions, red for removals and yellow for
changes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 16:24:25 -06:00
Simon Glass
40f11fce7c buildman: Show 'make' command line when -V is used
When a verbose build it selected, show the make command before the output of
that command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 16:24:24 -06:00
Simon Glass
63c619eefd buildman: Add a space before the list of boards
Tweak the output slightly so we don't get things like:

   - board1 board2+  board3 board4

There should be a space before the '+'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-05 16:14:32 -07:00