Commit graph

1047 commits

Author SHA1 Message Date
Simon Glass
deb9599915 fs: Kconfig: Add a separate config for FS_CBFS
Rather than using CMD_CBFS for both the filesystem and its command, we
should have a separate option for each. This allows us to enable CBFS
support without the command, if desired, which reduces U-Boot's size
slightly.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: imply FS_CBFS on SYS_COREBOOT]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30 13:40:57 -04:00
Simon Glass
d66a10fc00 fs: Convert CONFIG_CMD_CBFS to Kconfig
This converts the following to Kconfig:
   CONFIG_CMD_CBFS

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: imply CMD_CBFS on SYS_COREBOOT]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30 13:40:56 -04:00
Simon Glass
3ff0900aaf x86: Display the SPL banner only once
At present on a cold reboot we must reset the CPU to get it to full speed.
With 64-bit U-Boot this happens in SPL. At present we print the banner
before doing this, the end result being that we print the banner twice.
Print the banner a little later (after the CPU is ready) to avoid this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2017-04-18 15:51:21 +08:00
Simon Glass
a6eb6769c6 x86: Drop leading spaces in cpu_x86_get_desc()
The Intel CPU name can have leading spaces. Remove them since they are not
useful.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-04-18 15:51:21 +08:00
Andy Shevchenko
ca0d29e4f0 x86: Introduce minimal PMU driver for Intel MID platforms
This simple PMU driver allows to tyrn power on and off for selected
devices. In particularly Intel Tangier needs to power on SDHCI
controllers in order to access to them during board initialization.

In the future it might be expanded to cover other Intel MID platforms,
that's why it's located under arch/x86/lib and called pmu.c.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-10 10:02:03 +08:00
Felipe Balbi
bb416465fd x86: Add SCU IPC driver for Intel MID platforms
Intel MID platforms have few microcontrollers inside SoC, one of them
is so called System Controller Unit (SCU).

Here is the driver to communicate with microcontroller.

Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-04-10 10:02:03 +08:00
Stefan Roese
13c531e52a x86: bootm: Fix FIT image booting on x86
Checking 'is_zimage' at this time will always fail and therefore booting
a FIT style image will always lead to this error message:

"## Kernel loading failed (missing x86 kernel setup) ..."

This change now removes this check and booting of FIT images works just
fine.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-04-10 10:02:03 +08:00
Stefan Roese
cccab03a52 x86: Add file names from Kconfig in descriptor/intel-me nodes in u-boot.dtsi
Since we now have the file names configurable via Kconfig for the flash
descriptor and intel-me files, add these from Kconfig in the corresponding
dts nodes.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-04-10 10:02:03 +08:00
Stefan Roese
3dc0f8446a x86: Kconfig: Add options to configure the descriptor.bin / me.bin filenames
This introduces two Kconfig options to enable board specific filenames
for the Intel binary blobs to be used to generate the SPI flash image.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-04-10 10:02:03 +08:00
Simon Glass
e47b2d674f board_f: Make relocation functions generic
This header file is used by three archs. It could be used by all of them
since relocation is a common function. Move it into a generic file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05 16:36:57 -04:00
Simon Glass
96d4b75c0d board_f: Make init_helpers generic
This header file is used by two archs. It could be used by all of them
since it allows the cache to be on during relocation. Move it into a
generic file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05 16:36:56 -04:00
Simon Glass
5e924a13e7 Move dram_init_banksize() to a common header
This is an weak function present on all archs so we should have it in the
common header file. Remove it from arch-specific headers and add a
function comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-05 16:36:51 -04:00
Simon Glass
76b00aca4f board_f: Drop setup_dram_config() wrapper
By making dram_init_banksize() return an error code we can drop the
wrapper. Adjust this and clean up all implementations.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 16:36:51 -04:00
Simon Glass
76d1d02fd2 board_f: x86: Use checkcpu() for CPU init
At present we misuse print_cpuinfo() do so CPU init on x86. This is done
because it is the next available call after the console is enabled. But
several arches use checkcpu() instead. Despite the horrible name (which
we can fix), it seems a better choice.

Adjust the various x86 CPU implementations to move their init code into
checkcpu() and use print_cpuinfo() only for printing CPU info.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:55:09 -04:00
Simon Glass
671549e5b0 board_f: x86: Rename x86_fsp_init() to arch_fsp_init()
While x86 is the only user and this could in principle be moved to
arch_cpu_init() there is some justification for this being a separate
call. It provides a way to handle init which is not CPU-specific, but
must happen before the CPU can be set up.

Rename the function to be more generic.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:52:36 -04:00
Stefan Roese
706865afe5 dm: core: Add flags parameter to device_remove()
This patch adds the flags parameter to device_remove() and changes all
calls to this function to provide the default value of DM_REMOVE_NORMAL
for "normal" device removal.

This is in preparation for the driver specific pre-OS (e.g. DMA
cancelling) remove support.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2017-04-04 20:15:10 -06:00
Andy Shevchenko
308c75e08d x86: Intel MID platforms has no microcode update
There is no microcode update available for SoCs used on Intel MID
platforms.

Use conditional to bypass it.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-02-21 15:10:56 +08:00
Vincent Tinelli
20bfac0599 x86: zImage: add Intel MID platforms support
Intel MID platform boards have special treatment, such as boot parameter
setting.

Assign hardware_subarch accordingly if CONFIG_INTEL_MID is set.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-02-21 15:10:50 +08:00
Andy Shevchenko
7a96fd8ef0 x86: Introduce INTEL_MID quirk option
Intel Mobile Internet Device (MID) platforms have special treatment in
some cases, such as CPU enumeration or boot parameters configuration.

Besides that several drivers are specifically developed for the IP
blocks found on Intel MID platforms. Those drivers will be dependent to
this option.

Here we introduce specific quirk option for such cases.

It is supposed to be selected by Intel MID platform boards, for example,
Intel Edison.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-02-21 15:10:46 +08:00
J. Tang
3c03f4928e x86: Force 32-bit jumps in interrupt handlers
Depending upon the compiler used, IRQ entries could vary in sizes. With
GCC 5.x, the code generator will use short jumps for some IRQ entries
but near jumps for others. For example, GCC 5.4.0 generates the
following:

$ objdump -d interrupt.o
<snip>
00000207 <irq_18>:
207:   6a 12                   push   $0x12
209:   eb 85                   jmp    190 <irq_common_entry>

0000020b <irq_19>:
20b:   6a 13                   push   $0x13
20d:   eb 81                   jmp    190 <irq_common_entry>

0000020f <irq_20>:
20f:   6a 14                   push   $0x14
211:   e9 7a ff ff ff          jmp    190 <irq_common_entry>

00000216 <irq_21>:
216:   6a 15                   push   $0x15
218:   e9 73 ff ff ff          jmp    190 <irq_common_entry>

This causes a problem in cpu_init_interrupts(), because the IDT setup
assumed same sizes for all IRQ entries. GCC 4.x always generated 32-bit
jumps, so this previously was not a problem.

The fix is to force 32-bit near jumps for all entries within the
inline assembly. This works for GCC 5.x, and 4.x was already using
that form of jumping.

Signed-off-by: Jason Tang <tang@jtang.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-21 14:53:29 +08:00
Simon Glass
e160f7d430 dm: core: Replace of_offset with accessor
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08 06:12:14 -07:00
Andy Shevchenko
446d4e048e x86: make LOAD_FROM_32_BIT visible for platforms
This option is useful not only for development, but for the platforms
where U-Boot is run from custom ROM bootloader. For example, Intel
Edison is that board.

Make this option visible that platforms can select it if needed.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07 13:36:50 +08:00
Bin Meng
399de922ff x86: qemu: Mark ucode as optional for SPL in u-boot.dtsi
QEMU does not need ucode and this is indicated in u-boot.dtsi
for U-Boot proper. Now add the same for SPL.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07 13:27:13 +08:00
Bin Meng
2cffd90f14 x86: qemu: Set up device tree for SPL
Add the correct pre-relocation tag so that the required device tree
nodes are present in the SPL device tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07 13:27:11 +08:00
Bin Meng
63767071d9 x86: qemu: Fix compiler warnings for 64-bit
This fixes compiler warnings for QEMU in 64-bit.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07 13:27:08 +08:00
Bin Meng
e760feb19f x86: qemu: Hide arch_cpu_init() and print_cpuinfo() for U-Boot proper
arch_cpu_init() and print_cpuinfo() should be only available in SPL
build.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07 13:23:42 +08:00
Bin Meng
d8f25c2a5a x86: Compile irq.c for 64-bit
There is no reason not to compile irq.c for 64-bit.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07 13:23:39 +08:00
Bin Meng
8f60ea0039 x86: spl: Add weak arch_cpu_init_dm()
arch_cpu_init_dm() might not be implemented by every platform.
Implement a weak version for SPL.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07 13:23:36 +08:00
Bin Meng
020a5d4f63 x86: Wrap print_ch() with config option
print_ch() should not be used if DEBUG_UART is off.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07 13:23:07 +08:00
Bin Meng
45ffa122f2 x86: qemu: Add missing DECLARE_GLOBAL_DATA_PTR in e820.c
DECLARE_GLOBAL_DATA_PTR is missing which causes 64-bit build error.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07 13:22:01 +08:00
Simon Glass
3a03703afc x86: Update compile/link flags to support 64-bit U-Boot
Update config.mk settings to support both 32-bit and 64-bit U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07 13:14:54 +08:00
Simon Glass
6935dc1b7d x86: link: Set up device tree for SPL
Add the correct pre-relocation tag so that the required device tree nodes
are present in the SPL device tree.

On x86 it doesn't make a lot of sense to have a separate SPL device tree.
Since everything is in the same ROM we might as well just use the main
device tree in both SPL and U-Boot proper. But we haven't implemented that,
so this is a good first step.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07 13:10:59 +08:00
Simon Glass
164f0414da x86: link: Add SPL declarations to the binman image
When building for 64-bit we need to put an SPL binary into the image. Update
the binman image description to reflect this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07 13:10:56 +08:00
Simon Glass
c780069f1e x86: Add a dummy setjmp implementation for x86_64
We don't have the code for this yet. Add a dummy version for now, so that
EFI builds correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07 13:10:50 +08:00
Simon Glass
4d3ac6c326 x86: Move setjmp to the i386 directory
This code is only used in 32-bit mode. Move it so that it does not get
built with 64-bit U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07 13:07:36 +08:00
Simon Glass
8cfc966c77 x86: Move call64 to the i386 directory
This code is only used in 32-bit mode. Move it so that it does not get
built with 64-bit U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07 13:07:33 +08:00
Simon Glass
337705833c x86: Change irq_already_routed to a local variable
This avoids using BSS before SDRAM is set up in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07 13:07:30 +08:00
Simon Glass
a0c75f9080 x86: Move turbo_state to global_data
To avoid using BSS in SPL before SDRAM is set up, move this field to
global_data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07 13:07:26 +08:00
Simon Glass
1bff83637f x86: Move pirq_routing_table to global_data
To avoid using BSS in SPL before SDRAM is set up, move this field to
global_data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07 13:07:23 +08:00
Simon Glass
fa5fcb3bc6 x86: Support jumping from SPL to U-Boot
Add a rough function to handle jumping from 32-bit SPL to 64-bit U-Boot.
This still needs work to clean it up.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
c2bf0dfaa3 x86: Drop interrupt support in 64-bit mode
This is not currently supported, so drop the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
ca5114f9af x86: Don't try to boot Linux from SPL
Booting into linux from 64-bit U-Boot is not yet supported. Avoid bringing
in the bootm code until it is implemented.

Of course 32-bit U-Boot still supports booting into both 32- and 64-bit
kernels.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
e1b610b084 x86: Don't build 32-bit efi files on x86_64
These cannot be built in this mode, so drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
fb355619b2 x86: Don't build cpu files which are not supported on 64-bit
Some files cannot be built with 64-bit and mostly don't make sense in that
context. Disable them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
23b89d4d6e x86: Don't build call64 and setjmp on 64-bit
These are currently not supported. Calling 64-bit code from 64-bit U-Boot is
much simpler, so this code is not needed. setjmp() is not yet implemented for
64-bit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
05cbd985c0 x86: Don't try to run the VGA BIOS in 64-bit mode
This is not supported, so disable it for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
1b4086307e x86: ivybridge: Provide a dummy SDRAM init for 64-bit
We don't support SDRAM init in 64-bit mode since it is essentially
impossible to get into that mode before SDRAM set up. Provide dummy functions
for now. At some point we will need to pass the SDRAM parameters through from
SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
45cc9e4cc5 x86: ivybridge: Skip SATA init in SPL
This doesn't work at present. Disable it for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
db357236e3 x86: Fix up type sizes for 64-bit
Adjust types as needed to support 64-bit compilation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
4b57414a62 x86: Drop flag_is_changable() on x86_64
This doesn't build at present and is not used in a 64-bit build. Disable it
for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00