Commit graph

38 commits

Author SHA1 Message Date
Patrick Delaunay
fb90fcf826 board: stm32mp1: fixup the usb product id for USB download gadget
Select the correct USB product id used by the download gadget
for ST stm32mp1 boards.

The board stm32mp1 select the correct product id, as defined in
http://www.linux-usb.org/usb.ids for the STMicroelectronics
vendor id = 0x0483 (CONFIG_USB_GADGET_VENDOR_NUM):
- dfu = 0xdf11 : STM Device in DFU mode
  it is the value used by ROM code and reused for stm32prog
  command
- fasboot = 0x0afb : Android Fastboot device
- others = 0x5720 (CONFIG_USB_GADGET_PRODUCT_NUM)
  Mass Storage Device
  it is used for UMS command / usb_dnl_ums

This patch avoid conflict when the same USB VID/PID is used for
ums, fastboot or dfu command (two different protocols associated
to the same PID).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2019-10-22 11:00:07 +02:00
Patrick Delaunay
53e3d52c6c net: dwc_et_qos: update weak function board_interface_eth_init
Align the board and driver prototype for board_interface_eth_init
to avoid execution issue (the interface_type parameter is defined
as int or phy_interface_t).

To have a generic weak function (it should be reused by other driver)
I change the prototype to use directly udevice.

This prototype is added in netdev.h to allow compilation check
and avoid warning when compiling with W=1 on file
board/st/stm32mp1/stm32mp1.c

warning: no previous prototype for 'board_interface_eth_init'\
[-Wmissing-prototypes]
     int board_interface_eth_init(int interface_type, ....
         ^~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Patrick Delaunay
a68ae8dceb stm32mp1: Add copro image support for M4 firmware
Implements copro image loading with FIT.
Once image is loaded with remoteproc,
the M4 coprocessor is automatically started.

Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
ff6618e9b2 stm32mp1: update sysconf_init on misc_read result
Update management of misc_read in sysconf_init, which now return
length of data after the commit 8729b1ae2c ("misc: Update read()
and write() methods to return bytes xfered")

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
19efa39556 stm32mp1: update test on misc_read result
Update the stm32mp1 baord after the commit 8729b1ae2c
("misc: Update read() and write() methods to return bytes xfered")

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
d1a597fcb7 stm32mp1: board: cosmetic: cleanup file
- reorder include files
- remove one comment

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
4154247371 stm32mp1: board: remove board_check_usb_power when ADC is not activated
Avoid compilation issue when CONFIG_ADC is not activated

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
5e959ab85e stm32mp1: board: Update the way vdd-supply is retrieved from DT
Due to kernel DT alignment, pwr-supply is renamed to vdd-supply
and is a subnode of pwr-regulators.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
55f9cd2afe stm32mp1: board: check the boot-source to disable bootdelay
Allows to avoid to wait 2 second in U-Boot before to
start STM32CubeProgrammer command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
4616ff425c stm32mp1: board: protect the led function calls
Avoid compilation issue when CONFIG_LED is not activated

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
dd2810851e stm32mp1: board: support of error led on ed1/ev1 board
Create a function led_error_blink and add node in device
tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
d573e46168 stm32mp1: board: enable v1v2_hdmi and v3v3_hdmi regulator on dk2 boot
As for Audio codec IC, HDMI IC is not "IO safe".
HDMI regulators (v3v3 and v1v2) must be enabled to allow
I2C1 bus usage. HDMI IC must be under reset during power up
and keep HDMI and AUDIO devices in reset while they are not
used in U-Boot to keep them in low power mode
(each device can be kept in reset independently keeping their
power supplies ON until kernel).

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
8b8b3d6b55 stm32mp1: board: add environment variable for board id and board rev
Add variable to identify board with HW id (read from OTP)
and revision.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Simon Glass
f3998fdc4d env: Rename environment.h to env_internal.h
This file contains lots of internal details about the environment. Most
code can include env.h instead, calling the functions there as needed.

Rename this file and add a comment at the top to indicate its internal
nature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Fixup apalis-tk1.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11 19:27:31 -04:00
Simon Glass
3a7d55716d env: Move env_get_f() to env.h
Move this function over to the new header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11 16:43:41 -04:00
Patrick Delaunay
8e1947774e board: stm32mp1: Fix warnings when compiling with W=1
This patch solves the following warnings:

warning: no previous prototype for 'board_quiesce_devices' [-Wmissing-prototypes]
 void board_quiesce_devices(void)
      ^~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:54 +02:00
Patrick Delaunay
e81f8d16e2 stm32mp1: activate OF_BOARD_SETUP and FDT_FIXUP_PARTITIONS
Update kernel MTD partition in device tree with U-Boot information.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:53 +02:00
Patrick Delaunay
152c84bce9 stm32mp1: add configuration op-tee
Add support of Trusted boot chain with OP-TEE
- reserved 32MB at the end of the DDR for OP-TEE

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:52 +02:00
Patrick Delaunay
f59ad456ff stm32mp1: call regulators_enable_boot_on in board_init
U-Boot activates regulators by reading the "regulator-boot-on"
property in DT; it is requested by M4 early Boot feature.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:18:53 +02:00
Christophe Roullier
edacf26821 board: stm32mp1: Add board_interface_eth_init
Called to configure Ethernet PHY interface selection and
configure clock selection in RCC Ethernet clock tree.

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
2019-06-06 17:40:18 +02:00
Patrice Chotard
28c064e66b board: stm32mp1: Update power supply check via USB TYPE-C
Add 2 new checks:
 - detect when USB TYPE-C cable is not plugged correctly.
   In this case, GND and VBUS pins are connected but not CC1
   and CC2 pins.

 - detect is an USB Type-C charger supplies more than 3 Amps
   which is not compliant with the USB Type-C specification

In these 2 situations, stop the boot process and let red led
blinks forever.

   V cc1      |   V cc2     | power supply | red led | console message
range (Volts) |range (Volts)|   (Amps)     | blinks  |
--------------|-------------|--------------|---------|-----------------------------------
    > 2.15    |   < 0.2     |     > 3      | for ever| USB TYPE-C charger not compliant with specification
[2.15 - 1.23[ |   < 0.2     |     3        |   NO    | NO
[1.23 - 0.66[ |   < 0.2     |     1.5      | 3 times | WARNING 1.5A power supply detected
[0.66 - 0]    |   < 0.2     |     0.5      | 2 times | WARNING 500mA power supply detected
    < 0.2     |   < 0.2     |              | for ever| ERROR USB TYPE-C connection in unattached mode
    > 0.2     |   > 0.2     |              | for ever| ERROR USB TYPE-C connection in unattached mode

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:17 +02:00
Patrice Chotard
e5c38fdd3a stm32mp1: Update env_get_location for NOR support
Update env_get_location() to be able to save environment into
NOR (SPI_FLASH).

Series-cc: pde, cke, pch, uboot-stm32

Cover-letter:
Add saveenv support for STM32MP1

This series adds saveenv support for STM32MP1 on several boot
devices. STM32MP1 is able to boot on eMMC, sdcard and NOR
(NAND support is not fully supported).

On eMMC and sdcard, environment is saved in EXT4 partition
On NOR, environment is saved in a dedicated partition
On NAND, environment is saved in a UBI volume.

This series:
  - enables NAND and NOR support on ev1 board
  - enables ENV_IS_IN_SPI_FLASH, ENV_IS_IN_UBI, ENV_IS_IN_EXT4
    flags
  - fixes get_mtdparts()
  - allows to override interface, device and partition for ext4
    environment
  - updates rule to set ENV_IS_NOWHERE value
  - introduce ENV_IS_IN_DEVICE
END

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:15 +02:00
Patrice Chotard
8f24b1a4a9 stm32mp1: Add env_get_location()
In case of several environment location support, env_get_location
is needed to select the correct location depending of the boot
device .

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:14 +02:00
Patrice Chotard
7f90cd6150 board: stm32mp1: Add env_ext4_get_dev_part() and env_ext4_get_intf()
This allows to :
- select the current device to save the environment file
- select the correct EXT4 boot device instance
  and partition to save the environment file.

For EXT4, device is mmc, device instance is 0 for sdcard or 1 for eMMC.
The partition is set to "auto" to select the first partition with
bootable flag.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:13 +02:00
Patrice Chotard
87471649a5 stm32mp1: support dynamic MTDPARTS
This patch configure the default value for mtdids and mtparts
dynamically according the presence of nor and nand in
the board device tree

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:12 +02:00
Patrick Delaunay
6fe7dd3327 stm32mp1: add stusb1600 support for DK1 and DK2 board
The DK1 and DK2 boards use the USB Type-C controller STUSB1600.
This patch updates:
- the device tree to add the I2C node in the DT
- the board stm32mp1 to probe this I2C device and use this controller
  to check cable detection.
- the DWC2 driver to support a new dt property
  "u-boot,force-b-session-valid" which forces B session and
  device mode; it is a workaround because the VBUS sensing and
  ID detection isn't available with stusb1600.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:52 +02:00
Patrick Delaunay
c31000c534 stm32mp1: migrate USBOTG device to driver model
Use the DWC2 device driver with DM_USB_GADGET support and
cleanup the USB support in STM32MP1 board.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21 10:26:52 +02:00
Patrice Chotard
8b4afe8070 board: stm32mp1: Force pinctrl driver probe in board_init()
In order to insure that hog GPIOs are configured early during
the boot process, force all pinctrl driver probing in board_init().

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12 16:09:13 +02:00
Patrice Chotard
395f12976c Board: stm32mp1: Add supply current boot information
For DK1/DK2 boards, check if power supply provides enough current
to allow the board to boot correctly.
ADC@0 channel 18 and 19 are connected to USB type-C CC1 and CC2
signals. The table below shows the behavior for different range of
CC1 or CC2:

  range       | power supply | red led |          console message
  (Volts)     |   (Amps)     | blinks  |
--------------|--------------|---------|-----------------------------------
[2.10 - 1.23[ |     3        |   NO    |    NO
[1.23 - 0.66[ |     1.5      | 3 times | WARNING 1.5A power supply detected
[0.66 - 0]    |     0.5      | 2 times | WARNING 500mA power supply detected

If detected current is < 3A, red led is kept ON after blinking.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
45459747ca stm32mp1: add syscfg initialization
Initialize the system configuration for basic boot
- update interconnect setting
- disable pull-down for boot pin
- enable High Speed Low Voltage Pad mode for SPI, SDMMC, ETH, QSPI
- activate I/O compensation

Done by SSBL = TF-A for trusted boot

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
9a2ba2838b stm32mp1: support forced boot mode
The boot mode can be forced by key press
or by TAMP register, requested in kernel by syscon-reboot-mode

tamp: tamp@5c00a000 {
	compatible = "simple-bus", "syscon", "simple-mfd";
	reg = <0x5c00a000 0x400>;

	reboot-mode {
		compatible = "syscon-reboot-mode";
		offset = <0x150>; /* reg20 */
		mask = <0xff>;
		mode-normal = <0>;
		mode-fastboot = <0x1>;
		mode-recovery = <0x2>;
		mode-stm32cubeprogrammer = <0x3>;
		mode-ums_mmc0 = <0x10>;
		mode-ums_mmc1 = <0x11>;
		mode-ums_mmc2 = <0x12>;
	};
};

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
842ebb5f40 stm32mp1: update bootcmd
Clearly separate bootcmd for stm32mp1 board
(bootcmd_stm32mp) and preboot management.
That solve issue for fastboot continue command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
b4ae34b66b stm32mp1: add runtime information in environment
Set board name with the first dts compatible found in DT
code under CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

The result with DEVICE_TREE=stm32mp157c-ev1 is:
    STM32MP> env print
    	board=stm32mp1
    	board_name=stm32mp157c-ev1

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
d461f10036 stm32mp1: display board information
Implement checkboard() function to display
- the boot chain used: basic or trusted
- the board compatible in device tree
- the board identifier and revision, saved in OTP59 for ST boards

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrice Chotard
4c834b965a board: st: stm32mp1: Add usb gadget support
Enable USB gadget support using DWC2 driver
Populate board_usb_init() to initialize clocks,
phy, reset and data needed for DWC2 IP.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-09-25 21:48:43 -04:00
Patrick Delaunay
1f5118b4d3 stm32mp1: use new function led default state
Initialize the led with the default state defined in device tree.

Reviewed-by: Simon Glass <sjg@chromium.org>

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-08-10 10:27:32 -04:00
Tom Rini
4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00
Patrick Delaunay
f8598d9815 board: st: add generic board for STM32MP1 family
Add first support for STM32MP157C-ED1 board with "Basic" boot chain
1/ Boot Rom: load SPL with STM32 image header in SYSRAM
2/ SPL: power up and initialize the DDR and load U-Boot image
        from SDCARD in DDR
3/ U-Boot: search and load extlinux.conf in SDCARD
           (DISTRO activated)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00