Commit graph

5141 commits

Author SHA1 Message Date
Siva Durga Prasad Paladugu
bfd092f9ca arm64: versal: Define board_late_init for versal
Define board_late_init which performs bootmode detection
and prepares corresponding distro boot commaand sequence.

Also disable it for mini platforms because simply there is no need to have
it enabled.
But also disable it for virtual platform because Qemu is not modelling this
register space that's why travis testing would fail. This configuration
should be reverted when mainline Qemu is updated.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:11:14 +02:00
Michal Simek
cbe3101018 arm64: zynqmp: Enable SPI support in SPL for zcu104
It is enabling this mode but full boot is not validated yet.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:11:14 +02:00
Michal Simek
0317a2c8c2 arm64: zynqmp: Enable gpio hog support for zcu102
Gpio hogs are used for GT mux setup after power up.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:11:13 +02:00
Michal Simek
0413f9c3e6 arm64: zynqmp: Define default SPL_TEXT_BASE address in Kconfig
Define default address via Kconfig. There is no need to change this address
for most of the boards but it is also possible. This one line save a lot of
lines in defconfigs that's why make sense to do it.

The similar change has been done by commit 9340d8fe8b
("sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-10-08 09:11:13 +02:00
Simon Goldschmidt
e263607a03 arm: socfpga: disable CONFIG_SPL_WDT for gen5 and a10
These boards don't have a watchdog enabled in SPL, so make sure
CONFIG_SPL_WDT is not enabled.

Fixes: commit 6874cb7220 ("watchdog: Split WDT from SPL_WDT")

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-06 15:20:53 -04:00
Tom Rini
4b0bcfa7c4 Kconfig: Migrate CONFIG_BOOTM_* options
Migrate all of the existing OS support options that are under
CONFIG_BOOTM_* to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04 12:21:23 -04:00
Matthias Brugger
9de5b89e4c rpi4: enable dram bank initialization
When booting through the efi stub, the memory map get's created by
reading the dram bank information. Depending on the version of the RPi4
this information changes. Read the device tree to initialize the dram
bank data structure. This way the kernel is able to access the whole
range of available memory.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-10-01 11:14:47 +02:00
Stefan Roese
e074d0f79b arm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBT
This patch enables the BBT in NAND on the AT91SAM based GARDENA smart
Gateway. This is especially important, since the Linux driver also
enables this option and uses the BBT table pages. Without setting this
option, U-Boot will try to re-use these pages again (e.g. UBI).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Tom Rini <trini@konsulko.com>
2019-09-30 09:15:23 +03:00
Tom Rini
665c35a764 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-23 11:47:37 -04:00
Tom Rini
780a17e814 - fix sunxi LCD clock divider
- fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO
 - fix splash banner output with DM_VIDEO
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXYfOAg4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXNuvAJ9VzrhgsuLwc10A64B/UEdnVEhXSwCeM8fTzWDt
 JkN2FTYt5mImZtm52jI=
 =U0N4
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-2019.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-video.git

- fix sunxi LCD clock divider
- fix splash logo with DM_VIDEO and CONFIG_VIDEO_LOGO
- fix splash banner output with DM_VIDEO
2019-09-22 16:39:01 -04:00
Anatolij Gustschin
8eba739716 imx: mx6sabreauto: fix splash logo drawing
Enable BMP code. Also configure white on black for video console.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21 10:22:35 +02:00
Anatolij Gustschin
e80aa8b029 imx: icore: fix splash logo drawing
Define "splashimage" variable in the default environment
and enable BMP code. Also configure white on black for
video console.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21 10:22:08 +02:00
Anatolij Gustschin
b0413fc14b imx: mx6sabresd: fix splash logo drawing
After mxc_ipuv3 DM_VIDEO conversion showing splash image
doesn't work. Fix this. Also enable white on black console
configuration as it used to be with cfb_console driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
2019-09-21 10:20:45 +02:00
Anatolij Gustschin
b2ec22b52d imx: wandboard: fix splash logo drawing
After mxc_ipuv3 DM_VIDEO conversion showing splash image
doesn't work. Fix this. Also enable white on black console
configuration as it used to be with cfb_console driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-09-21 10:12:55 +02:00
Kever Yang
4a6b74a3c4 rockchip: config: evb-rk3288: enable SPL_STACK_R
We need a new STACK in SDRAM instead of SRAM so that the EMMC controller
can work properly. The EMMC/SD controller's master is not able to access
SRAM area, it can only access DRAM area.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Kever Yang
507477ee3d rockchip: evb-rk3288: Drop explicit SPL_TEXT
SPL_TEXT_BASE is 0x0 by default, based on the kconfig
definition move in below commit.

"configs: move CONFIG_SPL_TEXT_BASE to Kconfig"
(sha1: f89d6133ee)

So, don't define it explicitly.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Michael Trimarchi
f810ea6acb rockchip: rk3288-tinker: Attach missing peripherals at SPL
Tinker board needs to mux all the sdmmc gpio and
activate the regulator connected to bank 7. Remove
all the bank that are not in use and mark them as dm,spl
so-that it would initialize at SPL.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Jagan Teki
4bd143b57d configs: tinker: Enable SDRAM, SPL stack
SPL sets up SDRAM while in its board_init_f()
function, it is possible for the stack to move
there before board_init_r() is reached.

So it is required to reserve the stack for SDRAM,
with a proper location and size otherwise any
operations during SPL handoff would leads to failure.

On, this particular context tinker-rk3288 SPL is
failing to launch U-Boot proper on SDRAM due to
lack of stack.

 U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530)
 Trying to boot from MMC1
 spl: mmc init failed with error: -110
 SPL: failed to boot from all boot devices
 ### ERROR ### Please RESET the board ###

So, enable SPL_STACK_R_ADDR and it's related-config
items for SDRAM, SPL stack to setup properly.

Reported-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Jagan Teki
87d3fac2e9 configs: tinker: Drop explicit SPL_TEXT
SPL_TEXT_BASE is 0x0 by default, based on the kconfig
definition move in below commit.

"configs: move CONFIG_SPL_TEXT_BASE to Kconfig"
(sha1: f89d6133ee)

So, don't define it explicitly.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Jagan Teki
78efae613b configs: vyasa-rk3288: Fix SPL_TEXT_BASE
The initial Vyasa-rk3288 TPL implementation is to reuse the
SPL_TEXT_BASE for TPL and SPL as 0x0 and 0xff704000 respectively.

But the below commit implements the reverse way of using TEXT_BASE's
like 0xff704000 for TPL and 0x0 for SPL and which indeed update
the SPL_TEXT_BASE for vyasa-rk3288 board.
"rockchip: Kconfig: enable TPL support for rk3328"
(sha1: 3f47db0275)

So, fix by dropping the legacy SPL_TEXT_BASE and it will
reassign 0x0 by default based on Kconfig definition.

Reported-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Hugh Cole-Baker
fc925fd15f configs: rockpro64-rk3399: Enable CONFIG_MISC_INIT_R and ROCKCHIP_EFUSE
This enables reading the cpuid from e-fuse, and deriving a static
MAC address from it. Without this, the ethernet interface on the
rockpro64 can't be used to boot.

Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Tom Rini
a9fa70b7b7 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add emmc hs200 support
- Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-16 13:13:45 -04:00
Tom Rini
a314ec1bfd Merge branch 'master' of git://git.denx.de/u-boot-sh 2019-09-15 21:14:26 -04:00
Marek Vasut
b32882dadb sh: r2dplus: Enable DHCP command
Enable the "dhcp" command as a minor convenience.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-14 21:28:55 +02:00
Andrew F. Davis
1852b44cef configs: am65x_hs_evm: Use FIT images when booting HS devices
HS devices use the FIT post processing step to authenticate boot images.
Set the configured boot command to load FIT by default.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-09-13 11:56:30 -04:00
Adam Ford
b8879c4ef7 ARM: omapl138_lcdk: Enable Pinctrl
The single pinctrl supports the da8xx, so this patch enables
pinctrl in U-Boot.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13 11:56:30 -04:00
Adam Ford
ca62f2ba15 ARM: omapl138_lcdk: Enable DM_GPIO and DM and GPIO Commands
The da8xx GPIO driver is available with DM_GPIO support.  This
patch enables the CMD_GPIO, CMD_DM, and DM_GPIO and DA8XX_GPIO.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13 11:56:08 -04:00
Adam Ford
20a4a853e2 ARM: omapl138_lcdk: Disable SPL_DM_USB
The USB was just recently enabled, so it is unlikely anyone is
using it in SPL, so this patch removes it from SPL to further
reduce the SPL code size.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-13 11:56:08 -04:00
Suniel Mahesh
24e443978a arm: am437x: cm-t43: Enable DM for MMC, USB, SPI, SPI_FLASH, enable BLK
Enable driver model for USB, MMC, SPI and SPI_FLASH. Also enable BLK.
This will remove the following compile warnings:

===================== WARNING ======================
This board does not use CONFIG_DM_MMC. Please update
the board to use CONFIG_DM_MMC before the v2019.04 release.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_USB. Please update
the board to use CONFIG_DM_USB before the v2019.07 release.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
====================================================
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-09-13 11:56:08 -04:00
Suniel Mahesh
d60eb8e49e arm: am437x: cm-t43: Add device tree, enable OF_CONTROL
Add device tree from Linux for driver model conversion
and enable OF_CONTROL. This will remove the following compile
warning:
==================================================
Device Tree Source is not correctly specified.
Please define 'CONFIG_DEFAULT_DEVICE_TREE'
or build with 'DEVICE_TREE=<device_tree>' argument
===================================================
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-09-13 11:56:08 -04:00
Pankaj Bansal
5d535aa40b board: fsl: lx2160a: implement board_fix_fdt
lx2160a rev1 and rev2 SoC has different pcie controller.
The pcie controller device tree node fields "compatible"
and registers names needs to be updated accordingly

This change in device tree is handled as part of
fdt fixups. These changes would only be applied
if the soc revision is not rev1.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:42 +05:30
Yinbo Zhu
f09d52b4c0 configs/ls1012ardb,lx2160ardb,ls1028ardb: add esdhc hs200 config
Enable CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK and
CONFIG_MMC_HS200_SUPPORT config for
ls1012ardb, ls1012ardb, lx2160ardb
in defconfig file

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:06:29 +05:30
Tom Rini
40e362a9ab Merge tag 'mmc-9-6-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
Bug fixes to mmc_spi
Add Aspeed SD driver
Fix dw_mmc timeout calculation
Fix timeout values passed to mmc_wait_dat0
sdhci dt caps/mask update

[trini: Fix evb-ast2500_defconfig CONFIG_MMC line]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-08 21:15:13 -04:00
Tom Rini
2f760735c1 Merge branch 'master' of git://git.denx.de/u-boot-sh
- Initial DM conversion
2019-09-07 13:49:39 -04:00
Tom Rini
ba83753289 - fix mailbox status register used for polling
- fix bcm2835_sdhost to wait long enough for a transfer to complete
 - increase kernel image size from 8 MB to 64 MB on arm64
 - add support for RPi4
 - add prefixes for raspberry pi related stuff to git-mailrc
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEiUuSfQSYnG8EMsBltDliWyzx00MFAl1yhwYSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJELQ5Ylss8dNDNE8QAIzrHZ0RYg6eMCBFzAOyFu+daxUqB1vh
 GR3Kq2ku5+cwmWDRhZjj5Y8ualFqm5/IVvIbYLpV8r5ltnHJOsLCUiNVFsyod3uY
 Np3TtTH6B1QkZAJhz+kqHUHlrNlys/+7vEv1gHdSjZ+fM3OTB+NOzA6cjPMPl1lD
 fGQBEeoddMVjA7UDyoEORrwlQTy7PK82FK5xge4S8nmTrCwGkqkapg24haQwabSd
 QvNjXte1r3g/fsQZ+tFRIZEqOrBpdqXt1sEjrDe8ICjUeRIaOs/3lJxgjk2H1ia6
 x9O7u3OJNgmjs7Y5idi5pXBNiEMKFJCInAecPg6vKkaw/CAQgoQN+8MP5jjE4Cvr
 5oN6vkbScSZ8TeSYgb9NoGZ2/YxqJv67U2+4xSLn9eWPflwy3iVIOaM8R1cOEiHy
 On9tE1JMkIEQ6DClyXlERovTnAUkfFh9Wac8UbTxqHEhcBtGzRkPSYkCRXBR6mL1
 GNh3XZEFLDAczm/nzwQSgbGqKo02siKlOJbKh5PMRA/SZXVKY0BlkpI8hmj+2ra0
 V33YjmwxS+NJdRIQJoVQVgJ8eIFdioJ6+6G3oV7btGlgbA1sJajHtm3ZZ5+080+I
 fbiy1ibUjnrWcVmPWEtY3pr6ZzcL52N8Nzj7c02yej2PS/VL2ewYj7vjmUhFOVYv
 uHKtATRqUYCz
 =hWTf
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2019.10' of https://github.com/mbgg/u-boot

- fix mailbox status register used for polling
- fix bcm2835_sdhost to wait long enough for a transfer to complete
- increase kernel image size from 8 MB to 64 MB on arm64
- add support for RPi4
- add prefixes for raspberry pi related stuff to git-mailrc
2019-09-06 19:49:51 -04:00
Andrei Gherzan
193279d784 RPI: Add defconfigs for rpi4 (32/64)
This defines a minimum defconfig for each of the two Raspberry Pi 4
variants. One notable difference is that we don't have a embedded dt for
this board given that the fw supplies us with one which we can reuse.
Furthermore, the ram size is not queryable through mbox interface as the
maximum reported size is 1G. The fw patches the dt with the right
memory configuration and uboot uses it as it is. We avoid u-boot
touching this configuration by making sure CONFIG_ARCH_FIXUP_FDT_MEMORY
is deactivated.

Signed-off-by: Andrei Gherzan <andrei@balena.io>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-09-06 18:16:59 +02:00
Heinrich Schuchardt
794219bd12 riscv: qemu: enable CONFIG_CMD_BOOTEFI_SELFTEST
Enable CONFIG_CMD_BOOTEFI_SELFTEST for the QEMU RISC-V boards.

Travis CI QEMU testing has been enabled for qemu-riscv64_defconfig. With
this patch we will test the UEFI sub-system on the board.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-05 23:18:51 +02:00
Eddie James
c8bcd9b4b4 configs: AST2500 EVB: Enable SD controller
Enable the MMC subsystem and the Aspeed SD controller. Also enable the
use of the device tree for probing the controller.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
2019-09-05 15:27:31 +08:00
Ramon Fried
259f7223f2 configs: sandbox: enable PCAP capture cmd
Enable CONFIG_CMD_PCAP for testing PCAP capture.

Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Alexey Brodkin
9ddaf1d516 arc: emsdp: Add initialization of PSRAM
If the "Page Mode" is not enabled on the device,
read operations from PSRAM may result in incorrect data.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-09-03 19:05:34 +03:00
Marek Vasut
eaae4ee2bd sh: r2dplus: Switch to DM PCI driver
Add DT entry for the DM PCI driver, update board configs
and drop ad-hoc board init code for the PCI bus. Instead,
let the DM PCI driver initialize and operate the hardware.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-02 17:38:43 +02:00
Marek Vasut
8c2c46350d sh: r2dplus: Enable OF control
Enable OF control for SH4 R2Dplus board. This is necessary, because
the PCI uclass is designed in a way that makes it depend on DT and
disallows instanciating devices without DT (e.g. with platdata).

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-02 17:38:43 +02:00
Marek Vasut
c88bced3f6 sh: r2dplus: Enable DM
Enable driver model support for SH4 R2Dplus board. Thus far, no
drivers are bound via the DM. The PCI drivers have yet to be
converted to DM_PCI.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-09-02 17:38:43 +02:00
Tom Rini
d22c8be964 Merge branch 'master' of git://git.denx.de/u-boot-sh
- r8a66597 usb changes
2019-09-01 13:33:12 -04:00
Ryan Harkin
296439e0b1 Revert "vexpress64: fvp dram: add DRAM configuration"
This reverts commit fc04b92354 where the
FVP DRAM configuration was added.

Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
2019-08-31 09:27:19 -04:00
Suniel Mahesh
40a13173b5 arm: omap2: am43xx: Enable CONFIG_DM_USB
Enable CONFIG_DM_USB to remove compile warning for
am43xx based targets:

===================== WARNING ======================
This board does not use CONFIG_DM_USB. Please update
the board to use CONFIG_DM_USB before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-08-30 14:17:11 -04:00
Weijie Gao
940dd14346 configs: enable CONFIG_BLOCK_CACHE for mt7623n_bpir2
This patch enables CONFIG_BLOCK_CACHE for mt7623n_bpir2.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-08-30 14:17:11 -04:00
Tom Rini
25f32e0dff Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
Enable DM PCI for T2080RDB, T4240RDB, T1024RDB, T1042D4RDB, P1020RDB,
P2020RDB, P2041RDB, P3041DS, P4080DS, and MPC8548CDS
2019-08-29 07:26:13 -04:00
Hou Zhiqiang
43e881e38b configs: MPC8548CDS: Enable PCIe driver
Enable the DM PCIe driver in MPC8548CDS defconfig.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:47 +05:30
Hou Zhiqiang
e44b5c012f configs: P5040DS: Enable PCIe driver
Enable the DM PCIe driver in P5040DS defconfig.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
eviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:47 +05:30