Commit graph

52843 commits

Author SHA1 Message Date
Chen-Yu Tsai
792b204798 ARM: Specify aligned address for secure section instead of using attributes
In commit a1274cc94a ("ARM: Page align secure section only when it is
executed in situ"), we used output section attributes (the "ALIGN"
keyword after the colon) to specify the alignment requirements. Using
the constant "COMMONPAGE" there was recently broken in binutils 2.31 [1].

Binutils maintainer Alan Modra suggested the former method would still
work. Since both methods achieve the same result, this patch does just
that. This fixes the "reboot after bootm" issue we've been seeing on
sunxi when booting non-secure.

  [1] https://sourceware.org/bugzilla/show_bug.cgi?id=23571

Suggested-by: Alan Modra <amodra@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Jagan Teki <jagan@openedev.com>
2018-09-07 09:11:42 -04:00
Fabio Estevam
4cdeda511f pico-imx7d: Update the README file
Update the README file to take into accound the switch to SPL.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-06 09:19:13 -04:00
Bin Meng
b5135e4538 travis: Use kernel.org pre-built toolchain for riscv
This updates travis configuration to use kernel.org pre-built
toolchain for riscv.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-09-05 22:14:37 -04:00
Tuomas Tynkkynen
861b85c482 ARM: qemu-arm: Fix qemu_arm64_defconfig for QEMU 3.0
QEMU 3.0 introduced additional memory-mapped regions for PCI-E ECAM and
MMIO. Thus we need to add them to our MMU map or U-Boot will crash with
a Synchronous Abort during PCI-E probing when it tries to access the
unmapped ECAM memory area.

Reported-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Tested-by: Jonathan Gray <jsg@jsg.id.au>
2018-09-05 22:14:37 -04:00
Heinrich Schuchardt
f2906e5f58 lib/slre: remove superfluous assignment
It makes no sense to assign a value to 'res' if the next use of the
variable is an assignment.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-09-05 16:02:34 -04:00
Jasper kcoding
a92e52137d amlogic: board p212: Fix Ethernet PHY init
Without this patch the Ethernet PHY on the p212 board does not get
fully configured.
When this happens Ethernet does not function.

The similar libretech-cc and khadas-vim boards have this code already.
That's why the Ethernet on these boards do work.

Signed-off-by: Jasper Kcoding <jasperkcoding@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-09-05 16:02:34 -04:00
Alexander Graf
c330235597 qemu-arm: Enable DHCP distro target
When booting the QEMU virt machine with -net nic,model=e1000 we can already
support network boot just fine today.

So let's enable the default bootcmd to also evaluate DHCP responses properly.
That way we can enable network boot seamlessly with the virt target.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-05 16:01:22 -04:00
Adam Ford
548c35ff6e ARM: dts: logicpd-torpedo-37xx-devkit-u-boot: Fix MMC Card Detect
When re-syncing the DTS files from the kernel, something caused
the MMC driver to no longer detect the MMC card. Undoing the
CD-invert appears to fix the issue.

Fixes: e6ea2390cd ("ARM: DTS: Resync LogicPD-Torpedo-37xx-devkit
with Linux 4.18-RC4")

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-05 16:01:22 -04:00
Tom Rini
8a51db1d54 Merge tag 'arc-updates-for-2018.09' of git://git.denx.de/u-boot-arc
Minor changes for ARC

1. Fix CPU clock value in HSDK's .dts so time is counted properly.
2. Enable bootelf command on EMDK
2018-09-05 11:39:03 -04:00
Eugeniy Paltsev
13e57722fe ARC: HSDK: Fix timer frequency value
CPU (and hence cpu timers) on HSDK board runs at 500MHz after
preloader so fix wrong CPU frequency value in hsdk.dts

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
2018-09-05 18:11:45 +03:00
Alexey Brodkin
1a5da02c15 EMDK: Enable bootelf
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-09-05 18:10:59 +03:00
Tom Rini
b2f90c461e Merge branch 'master' of git://git.denx.de/u-boot-imx 2018-09-04 17:45:53 -04:00
Fabio Estevam
c1d1543ebc mx7dsabresd: Add the qspi target to the list of supported defconfigs
Add an entry for mx7dsabresd_qspi_defconfig to avoid the following
warnings:

WARNING: no status info for 'mx7dsabresd_qspi'
WARNING: no maintainers for 'mx7dsabresd_qspi'

Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-09-04 08:47:23 +02:00
Stefano Babic
b8babd8050 imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
CONFIG_CMD_MII is set without CONFIG_MII, build is broken.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2018-09-04 08:47:23 +02:00
Stefan Agner
a62c60610f colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
This commit adds support for the Toradex Colibri iMX7D 1GB Computer
on Module. The module is very similar to the Colibri iMX7D 512MB
but uses eMMC instead of raw NAND. This patch introduces a new
board specific Kconfig symbol to select between the two flash
options.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-09-04 08:47:23 +02:00
Stefan Agner
bc53fb19fe board: toradex: common: fail gracefully on missing NAND chip
If the NAND chip is missing get_nand_dev_by_index() returns NULL. Fail
gracefully in this case.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-09-04 08:47:23 +02:00
Anson Huang
57b620255e imx: mx7: add system suspend/resume support
This patch adds system suspend/resume support,
when linux kernel enters deep sleep mode, SoC will go
into below mode:

 - CA7 platform goes into STOP mode;
 - SoC goes into DSM mode;
 - DDR goes into self-refresh mode;
 - CPU0/SCU will be powered down.

When wake up event arrives:

 - SoC DSM mdoe exits;
 - CA7 platform exit STOP mode, SCU/CPU0 power up;
 - Invalidate L1 cache;
 - DDR exit self-refresh mode;
 - Do secure monitor mode related initialization;
 - Jump to linux kernel resume entry.

Belwo is the log of 1 iteration of system suspend/resume:

[  338.824862] PM: suspend entry (deep)
[  338.828853] PM: Syncing filesystems ... done.
[  338.834433] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  338.842939] OOM killer disabled.
[  338.846182] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  338.869717] PM: suspend devices took 0.010 seconds
[  338.877846] Disabling non-boot CPUs ...
[  338.960301] Retrying again to check for CPU kill
[  338.964953] CPU1 killed.
[  338.968104] Enabling non-boot CPUs ...
[  338.973598] CPU1 is up
[  339.267155] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[  339.275833] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[  339.284158] mmc1: queuing unknown CIS tuple 0x80 (6 bytes)
[  339.385065] PM: resume devices took 0.400 seconds
[  339.389836] OOM killer enabled.
[  339.392986] Restarting tasks ... done.
[  339.398990] PM: suspend exit

The resume entry function has to initialize stack pointer before calling
C code, otherwise there will be an external abort occur, in additional,
invalidate L1 cache must be done in secure section as well, so this
patch also adds assembly code back and keep it as simple as possible.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
2018-09-04 08:47:23 +02:00
Anson Huang
b059837850 imx: mx7: add gpc initialization for low power mode
Add i.MX7D GPC initialization for low power mode
support like system suspend/resume from linux kernel:

 - Pending IOMUXC IRQ to workaround GPC state machine issue;
 - Mask all GPC interrupts for M4/C0/C1;
 - Configure SCU timing;
 - Configure time slot ack;
 - Configure C0/C1 power up/down timing;
 - Configure wakeup source mechanism;
 - Disable DSM/RBC related settings.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-09-04 08:47:23 +02:00
Anson Huang
11e52bca84 imx: mx7: psci: improve cpu hotplug flow
This patch improves cpu hotplug, previous cpu_off
implementation is NOT safe, a CPU can NOT power down
itself in runtime, it will cause system bus hang due
to pending transaction. So need to use other online
CPU to kill it when it is ready for killed.

Here use SRC parameter register and a magic number
of ~0 as handshake for killing a offline CPU,
when the online CPU checks the psci_affinity_info,
it will help kill the offline CPU according to
the magic number stored in SRC parameter register.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-09-04 08:47:23 +02:00
Alex Kiernan
41b7b4b936 Cleanup CONFIG_BOOTDELAY on cl-som-imx7
CONFIG_BOOTDELAY has been migrated to Kconfig, but cl-som-imx7 was
missed. We can just delete the assignments as the config already has
the correct value.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-09-04 08:47:23 +02:00
Martin Kaiser
69f78cf840 watchdog: mx25: use the imx_watchdog driver for mx25
The existing imx_watchdog driver is compatible with mx25 chipsets.
Add a WDOG1_BASE_ADDR define for the base address and enable the driver
in watchdog's Makefile.

To use the driver, a board must define CONFIG_IMX_WATCHDOG and
CONFIG_HW_WATCHDOG.

This fixes an issue when booting an mx25 chip via usb/serial. In this
case, the boot rom will always enable the watchdog. If u-boot is running
in interactive mode and the watchdog is not serviced, the system is
rebooted when the watchdog expires.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-09-04 08:47:23 +02:00
Ye Li
1a8c01995f imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
Convert the codes and configurations to enable DM drivers in u-boot for
modules: i2c, PMIC, regulator, USB, Ethernet, SD/MMC, GPIO and QSPI

This patch does not change SPL, so it still uses non-DM driver for
UART, GPIO and SD/MMC.

Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04 08:47:23 +02:00
Ye Li
25baafc44c dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
Add the board DTS files for 14x14 EVK and 9x9 EVK. They are necessary
for converting to use u-boot DM driver.

Two -u-boot.dtsi are added to modify compatible string of SPI flash
device to "spi-flash".

Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04 08:47:23 +02:00
Ye Li
9e1e6f6fe8 dts: imx6ul: Update alias to support DM
Add spi0 alias for qspi for enabling DM SPI.
Change usb alias for usbotg1 and usbotg2 for enabling DM USB

Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04 08:47:23 +02:00
Ye Li
3b82335015 imx: imx7d-sdb: Add DM QSPI support
On iMX7D SabreSD board, the QSPI has pins conflict with EPDC (default).
To use QSPI, users have to rework the board (de-populate R388-R391, R396-R399
populate R392-R395, R299, R300). So we add new DTS file and new defconfig
dedicated for QSPI.

Other changes to support the DM QSPI:
 - Add QSPI node and alias spi0.
 - Modify spi4 (spi-gpio) node and add alias spi5 for it to avoid req
   conflict
 - Add EPDC node in imx7d.dtsi and disable it in imx7d-sdb-qspi.dts to
   align with kernel and also present the conflict.
 - Add -u-boot.dtsi to modify compatible string of mx25l51245g@0 to
   "spi-flash"
 - Remove iomux settings of qspi in board codes which is not needed
   for DM driver.

Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04 08:47:23 +02:00
Ye Li
0925ee2185 imx: imx6sx-sabreauto: convert to use DM QSPI driver
To support DM QSPI driver:
 - Add -u-boot.dtsi to modify n25q256a@0 and n25q256a@1 compatible string
   to "spi-flash" and add "num-cs" property.
 - Enable DM SPI and DM SPI FLASH configurations
 - Remove iomux settings of qspi1 in board codes which is not needed
   for DM driver.

Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04 08:47:23 +02:00
Ye Li
536c5c7a33 imx: imx6sx-sdb: Enable DM QSPI driver
To support DM QSPI driver
 - Add spi0 and spi1 alias for qspi1 and qspi2.
 - Add -u-boot.dtsi to modify n25q256a@0 and n25q256a@1 compatible string
   to "spi-flash" and add "num-cs" property.
 - Enable DM SPI/QSPI relavent configurations
 - Remove iomux settings of qspi2 in board codes which is not needed
   for DM driver.
 - Add sf default settings. So running "sf probe" can detect the flash

Signed-off-by: Ye Li <ye.li@nxp.com>
2018-09-04 08:47:23 +02:00
Tom Rini
3005162a43 Prepare v2018.09-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-03 15:36:33 -04:00
Tom Rini
8c5cad05c9 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-03 15:26:12 -04:00
Fabio Estevam
c3c19c2743 spl: Kconfig: Fix typo in 'Upgrade'
Correct the spelling of 'Upgrade'.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-08-31 11:59:44 -04:00
Masahiro Yamada
e3332e1a1a Make kmalloc'ed memory really DMA-safe
In Linux, the memory returned by kmalloc() is DMA-capable.
However, it is not true in U-Boot.

At a glance, kmalloc() in U-Boot returns address aligned with
ARCH_DMA_MINALIGN.  However, it never pads the allocated memory.
This half-way house is completely useless because calling kmalloc()
and malloc() in this order causes a cache sharing problem.

Change the implementation to call malloc_cache_aligned(), which
allocates really DMA-capable memory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-31 11:59:44 -04:00
Heinrich Schuchardt
4b0a2d3aab test: fix typo in cmd_ut_category() description
argc = 1: all tests are run
argc > 1: only argv[1] is run

So we need argc >= 1.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-31 11:59:44 -04:00
Manivannan Sadhasivam
a81f663ff7 hisilicon: hikey: Update instructions based on latest source
Update the HiKey board instructions based on the latest source
available. These instructions are derived from the ATF platform doc.
While updating the instructions, some comments on ATF issue has been
removed since it is fixed in latest ATF source.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-08-31 11:59:44 -04:00
Tom Rini
26b068280f Merge branch 'master' of git://git.denx.de/u-boot-sh 2018-08-30 10:15:03 -04:00
Tom Rini
1b74e9ce50 Merge branch 'master' of git://git.denx.de/u-boot-usb 2018-08-30 10:06:29 -04:00
Tom Rini
4b69e870e9 Merge branch 'master' of git://git.denx.de/u-boot-rockchip 2018-08-30 10:06:19 -04:00
Tom Rini
284d201b4d Merge git://git.denx.de/u-boot-x86 2018-08-30 10:06:11 -04:00
Marek Vasut
65186977ee mmc: renesas-sdhi: Use priv directly
The dev_get_priv(dev) is used twice in the probe function.
Replace the second invocation with priv variable.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-08-30 15:32:59 +02:00
Bin Meng
e69cc6bc42 x86: zimage: Remove acpi_rsdp_addr propagation to kernel boot parameters
As of today, the proposal of adding "acpi_rsdp_addr" to the kernel
boot protocol does not make its way to the kernel mainline. This
creates some confusion if we leave it in the U-Boot code base.
Remove it for now until we have a clear picture with kernel upstream.

Note this eventually does a partial revert to commit 3469bf4274
("x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters")

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-30 11:23:15 +08:00
Bin Meng
a0913cdf7b x86: efi: payload: Turn on acpi in the kernel command line
Now that we have full Linux kernel boot support on EFI payload,
avoid pass "acpi=off" to the kernel command line.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-30 11:23:14 +08:00
Bin Meng
1fdeacd32c x86: zimage: Support booting Linux kernel from an EFI payload
At present Linux kernel loaded from U-Boot as an EFI payload does
not boot. This fills in kernel's boot params structure with the
required critical EFI information like system table address and
memory map stuff so that kernel can obtain essential data like
runtime services and ACPI table to boot.

With this patch, now U-Boot as an EFI payload becomes much more
practical: it is another option of kernel bootloader, ie, can be
a replacement for grub.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-30 11:23:14 +08:00
Bin Meng
cbe503fbc1 efi: stub: Pass EFI system table address to U-Boot payload
This updates the EFI stub codes to pass UEFI BIOS's system table
address to U-Boot payload so that U-Boot can utilize it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-30 11:23:07 +08:00
Bin Meng
aac79251c7 x86: efi: payload: Install E820 map from EFI memory map
This implements payload-specific install_e820_map() to get E820 map
from the EFI memory map descriptors.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-30 09:56:58 +08:00
Kever Yang
feb64f9d51 rockchip: dts: fix unnecessary '-cells' warning
Fix warning below:
unnecessary #address-cells/#size-cells without "ranges" or child "reg"
property

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-08-29 20:44:50 +02:00
Ley Foon Tan
88c34b8da6 usb: dwc2: Add reset ctrl to driver
Add code to reset all reset signals as in usb DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.

If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-29 03:10:30 +02:00
Marek Vasut
313360b13f pci: rmobile: Filter out device 1 and 2
Only PCI device 1 and 2 is populated on the R-Car Gen2 internal
PCIe controller. Ignore all other devices. This fix prevents a
duplication of OHCI controller response on slot 0 and 1.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-28 11:01:52 +02:00
Marek Vasut
1335e7745f usb: ehci: Add PHY support to ehci-pci
Add support for operating a PHY attached to ehci-pci. There are
systems where the EHCI controller is internally wired to a PCI
bus and has a PHY connected to it as well, ie. the R-Car Gen2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-28 11:00:19 +02:00
Marek Vasut
b43cdf9b3f usb: ehci: Make the PHY handling generic
Pull out the EHCI PHY functions into the ehci-hcd.c to let other
EHCI drivers use them.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-28 11:00:18 +02:00
Marek Vasut
a265e5ef42 phy: Fix warning due to missing definition of structure
Fix this sort of warning if generic-phy.h is included:

include/generic-phy.h:52:42: warning: ‘struct ofnode_phandle_args’ declared inside parameter list will not be visible outside of this definition or declaration
  int (*of_xlate)(struct phy *phy, struct ofnode_phandle_args *args);

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-28 11:00:18 +02:00
Praneeth Bajjuri
11ed312896 configs: am57xx: change default board name to beagle_x15
beagleboard x15 is the first supported platform variant of am57xx
in AOSP (android open source project) now.

changing board name to stay in consistent with aosp target name.

Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
2018-08-26 12:26:16 -04:00