Commit graph

245 commits

Author SHA1 Message Date
Simon Glass
52f2423804 common: Drop bootstage.h from common header
Move this fairly uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Rasmus Villemoes
2960107a22 sandbox: also restore terminal settings when killed by SIGINT
Hitting Ctrl-C is a documented way to exit the sandbox, but it is not
actually equivalent to the reset command. The latter, since it follows
normal process exit, takes care to reset terminal settings and
restoring the O_NONBLOCK behaviour of stdin (and, in a terminal, that
is usually the same file description as stdout and stderr, i.e. some
/dev/pts/NN).

Failure to restore (remove) O_NONBLOCK from stdout/stderr can cause
very surprising and hard to debug problems back in the terminal. For
example, I had "make -j8" consistently failing without much
information about just exactly what went wrong, but sometimes I did
get a "echo: write error". I was at first afraid my disk was getting
bad, but then a simple "dmesg" _also_ failed with write error - so it
was writing to the terminal that was buggered. And both "make -j8" and
dmesg in another terminal window worked just fine.

So install a SIGINT handler so that if the chosen terminal
mode (cooked or raw-with-sigs) means Ctrl-C sends a SIGINT, we will
still call os_fd_restore(), then reraise the signal and die as usual
from SIGINT.

Before:

$ grep flags /proc/$$/fdinfo/1
flags:  0102002
$ ./u-boot
# hit Ctrl-C
$ grep flags /proc/$$/fdinfo/1
flags:  0106002

After:

$ grep flags /proc/$$/fdinfo/1
flags:  0102002
$ ./u-boot
# hit Ctrl-C
$ grep flags /proc/$$/fdinfo/1
flags:  0102002

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:57 -06:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
6be88c7282 sandbox: sdl: Add an option to double the screen size
On high-DPI displays U-Boot's LCD window can look very small. Add a
-K flag to expand it to make things easier to read, while still using
the existing resolution internally.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05 19:33:46 -07:00
Simon Glass
96d0cd4604 sandbox: sdl: Move to use SDL2
Sandbox currently uses SDL1.2. SDL2 has been around for quite a while and
is widely supported. It has a number of useful features. It seems
appropriate to move sandbox over.

Update the code to use SDL2 instead of SDL1.2.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
ac7b730201 sandbox: sdl: Support waiting for audio to complete
At present when audio stops, any in-progress output is cut off. Fix this
by waiting for output to finish.

Also use booleans for the boolean variables.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
5f736f8eca sandbox: sdl: Improve error handling
A few errors are not checked. Fix these and use my preferred spelling for
init.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
c127f191a8 sandbox: Add comments to the sdl struct
Add comments for each struct member. Drop frequency since it is not used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
3ff6fe5fab sandbox: Add a new header for the system malloc()
Some files use U-Boot headers but still need to access the system
malloc(). Allow this by creating a new asm/malloc.h which can be used so
long as U-Boot's malloc.h has not been included.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
1c8c47ec80 sandbox: Ensure that long-options array is terminated
The last member of this array is supposed to be all zeroes according to
the getopt_long() man page. Fix the function to do this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
89cdb0b583 sandbox: Drop os_realloc()
Due to recent changes this function is no-longer used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
0db1b4305a sandbox: Drop use of special os_malloc() where possible
Some sandbox files are not built with U-Boot headers, so with the renamed
malloc functions there is now no need to use the special os_... allocation
functions to access the system routines. Instead we can just call them
directly.

Update the affected files accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
cf23c7c1dd sandbox: Rename 'free' variable
This name conflicts with our desire to #define free() to something else on
sandbox. Rename it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
4209be3eae sandbox: Sort the help options
At present options are presented in essentially random order. It is easier
to browse them if they are sorted into alphabetical order. Adjust the
help function to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Sean Anderson
19464f4feb cli: Make the sandbox board_run_command the default
If CONFIG_CMDLINE=n, common/cli.c calls board_run_command. This fails to
link on most architectures. However, the sandbox architecture has an
implementation which we can use.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-02-05 19:33:46 -07:00
Simon Glass
db41d65a97 common: Move hang() to the same header as panic()
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17 17:53:40 -05:00
Simon Glass
89694de514 sandbox: Disable mmio by default in tests
When reseting sandbox for tests, disable mmio support since that is the
default state.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:11 +08:00
Simon Glass
288b29e44d common: Move command functions out of common.h
Move these functions into the command.h header file which is a better fit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:02 -05:00
Simon Glass
1eb69ae498 common: Move ARM cache operations out of common.h
These functions are CPU-related and do not use driver model. Move them to
cpu_func.h

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:24:58 -05:00
Heinrich Schuchardt
4ecb506434 sandbox: use correct type reading /proc/self/maps
Compiling arch/sandbox/cpu/os.c results in an error

../arch/sandbox/cpu/os.c: In function ‘os_find_text_base’:
../arch/sandbox/cpu/os.c:823:12: error: cast to pointer from
integer of different size [-Werror=int-to-pointer-cast]
  823 |     base = (void *)addr;
      |            ^
cc1: all warnings being treated as errors

The size of void* differs from that of unsigned long long on 32bit
systems.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-11-14 07:09:34 -06:00
Simon Glass
8417385dc9 sandbox: Drop 'const' from sandbox_write()
This function writes to its address so the address should not be declared
as const. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-27 10:56:41 -06:00
Simon Glass
e77663cf74 sandbox: Allow use of real I/O with readl(), etc.
At present these functions are stubbed out. For more comprehensive testing
with PCI devices it is useful to be able to fully emulate I/O access. Add
simple implementations for these.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: change to use 'const void *' in sandbox_write();
        cast 'addr' in read/write macros in arch/sandbox/include/asm/io.h;
        remove the unnecessary cast in readq/writeq in nvme.h]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:41 +08:00
Simon Glass
189882c933 sandbox: Add a -T flag to use the test device tree
U-Boot already supports using -D to indicate that it should use the normal
device tree. It is sometimes useful to run with the test device tree, e.g.
when running a test. Add a -T option for this along with some
documentation.

It can be used like this:

   /tmp/b/sandbox/u-boot -T -c "ut dm pci_busdev"

(this will use /tmp/b/sandbox/arch/sandbox/dts/test.dtb as the DT)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:41 +08:00
Simon Glass
366291afe6 spl: Add an arch-specific hook for writing to SPL handoff
At present there is an arch-specific area in the SPL handoff area intended
for use by arch-specific code, but there is no explicit call to fill in
this data. Add a hook for this.

Also use the hook to remove the sandbox-specific test code from
write_spl_handoff().

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:51:03 +08:00
Urja Rannikko
857f39d7b0 sysreset: switch to using SYSRESET_POWER_OFF for poweroff
It seems that SYSRESET_POWER_OFF was added recently, and all previous code
used SYSRESET_POWER for poweroff. SYSRESET_POWER is supposed to be a
PMIC-level power cycle, not a poweroff.

(Comment by Simon Glass)
SYSRESET_POWER means to do a power reset (removing and reinstating all power)
SYSRESET_POWER_OFF means to turn the device off and leave it off

Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
(Update comment to help understand the patch)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-19 12:43:26 +08:00
Simon Glass
912dcb1b17 sandbox: Add a comment to board_init_f()
This function is used for both SPL and TPL. Add a comment to that effect.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-10 16:52:58 -06:00
Simon Glass
3f2f5cf62a sandbox: spl: Lower priority of standard loader
We normally want to load U-Boot from SPL, but if a board wants to do
something else, it is currently not possible since the standard loader
has the top priority. Lower it to allow other SPL_LOAD_IMAGE_METHOD()
declarations to override it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-10 16:52:58 -06:00
Simon Glass
9072326a6a sandbox: Exit when SYSRESET_POWER_OFF is requested
At present this returns but it seems better to just exit sandbox
immediately.

Signed-off-by: Simon Glass <sjg@chromium.org>

reset
2019-07-10 16:52:58 -06:00
Simon Glass
5dbe794dc0 sandbox: Drop the printf() in setup_ram_buf()
This was really intended for debugging. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Simon Glass
4a6409b74c sandbox: Correct maths in allocation routines
Allocation routines were adjusted to ensure that the returned addresses
are a multiple of the page size, but the header code was not updated to
take account of this. These routines assume that the header size is the
same as the page size which is unlikely.

At present os_realloc() does not work correctly due to this bug. The only
user is the hostfs 'ls' command, and only if the directory contains a
unusually long filename, which likely explains why this bug was not
caught earlier.

Fix this by doing the calculations using the obtained page size.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Simon Glass
001d1885f0 sandbox: Improve debugging in initcall_run_list()
At present if one of the initcalls fails on sandbox the address printing
is not help, e.g.:

  initcall sequence 0000557678967c80 failed at call 00005576709dfe1f (err=-96)

This is because U-Boot gets relocated high into memory and the relocation
offset (gd->reloc_off) does not work correctly for sandbox.

Add support for finding the base address of the text region (at least on
Linux) and use that to set the relocation offset. This makes the output
better:

  initcall sequence 0000560775957c80 failed at call 0000000000048134 (err=-96)

Then you use can use grep to see which init call failed, e.g.:

   $ grep 0000000000048134 u-boot.map
   stdio_add_devices

Of course another option is to run it with a debugger such as gdb:

   $ gdb u-boot
   ...
   (gdb) br initcall.h:41
   Breakpoint 1 at 0x4db9d: initcall.h:41. (2 locations)

Note that two locations are reported, since this function is used in both
board_init_f() and board_init_r().

   (gdb) r
   Starting program: /tmp/b/sandbox/u-boot
   [Thread debugging using libthread_db enabled]
   Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".

   U-Boot 2018.09-00264-ge0c2ba9814-dirty (Sep 22 2018 - 12:21:46 -0600)

   DRAM:  128 MiB
   MMC:

Breakpoint 1, initcall_run_list (init_sequence=0x5555559619e0 <init_sequence_f>)
    at /scratch/sglass/cosarm/src/third_party/u-boot/files/include/initcall.h:41
41				printf("initcall sequence %p failed at call %p (err=%d)\n",
   (gdb) print *init_fnc_ptr
   $1 = (const init_fnc_t) 0x55555559c114 <stdio_add_devices>
   (gdb)

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Simon Glass
398ae02669 sandbox: Correct SDL build flags
The check for CONFIG_SANDBOX_SDL in config.mk does not work since the
build config is not available by the time that file is included. Remove it
so that we always call sdl-config except when NO_SDL is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-01-14 17:47:13 -07:00
Simon Glass
e221cdcf44 dm: sandbox: Allow selection of sample rate and channels
At present these parameters are hard-coded in the sdl interface code.
Allow them to be specified by the driver instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:37:09 -07:00
Simon Glass
f2b25c9bf8 dm: sound: Complete migration to driver model
All users of sound are converted to use driver model. Drop the old code
and the CONFIG_DM_SOUND option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:36:41 -07:00
Simon Glass
282e29eb47 dm: sandbox: sound: Convert to use driver model
Update sandbox's device tree and config to use driver model for sound. Use
the double buffer for sound output so that we don't need to wait for the
sound to complete before returning.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:36:30 -07:00
Simon Glass
e625b68b04 dm: sandbox: Update sound to use two buffers
At present we use a single buffer for sound which means we cannot be
playing one sound while queueing up the next. This wouldn't matter except
that a long sound (more than a second) has to be created as a single
buffer, thus using a lot of memory. To better mimic what real sound
drivers do, add support for double buffering in sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
40e9ede1dc sandbox: Use 'extras' to specify 'head' files
At present sandbox has a start.o in the 'start' target but also includes
it in the normal target list. This is not how this is normally handled. It
is needed because sandbox does not include the u-boot-init variable in its
link rule.

Update the rule and move start.o from the normal target list to the
'extras' list.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05 06:01:34 -07:00
Simon Glass
a65d1a06c9 sandbox: Zero the ram buffer on startup
At present the RAM buffer is not inited unless it is read from a file,
likely produced by an earlier phase of U-Boot. This causes valgrind
warnings whenever the RAM buffer is used. Correct this by initing it if
needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05 06:01:34 -07:00
Simon Glass
12efc933b9 sandbox: Check the filename in jump_to_image_no_args()
If the filename is NULL this function currently crashes. Update it to fail
gracefully.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05 06:01:34 -07:00
Simon Glass
6b5e420137 sandbox: Fix up the debug message for the image filename
This currently prints out the wrong filename. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05 06:01:34 -07:00
Simon Glass
b847c14243 sandbox: Use memmove() to move overlapping regions
The use of strcpy() to remove characters at the start of a string is safe
in U-Boot, since we know the implementation. But in os.c we are using the
C library's strcpy() function, where this behaviour is not permitted.

Update the code to use memmove() instead.

Reported-by: Coverity (CID: 173279)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-11-29 09:30:05 -07:00
Simon Glass
1180030d12 sandbox: Enable sound
Now that the buffer-overflow bug is fixed, we can enable sound on sandbox.
Drop the code which exits early.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-29 09:30:05 -07:00
Simon Glass
856b8f5629 sound: sandbox: Use the correct frequency
At present we request a particular frequency but we may not get the exact
same frequency in response. So use the actual frequency for generation of
the square wave. This ensures that the pitch remains accurate on all host
machines.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-29 09:30:05 -07:00
Simon Glass
7d92b06090 sound: Add sample rate as a parameter for square wave
At present this value is hard-coded in the function that generates a
square wave. Since sample rates vary between different hardware, it makes
more sense to have this as a parameter.

Update the function and its users.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-29 09:30:05 -07:00
Simon Glass
27028f186d sandbox: Boot in U-Boot through the standard call
Most architectures use jump_to_image_no_args() to jump from SPL to U-Boot.
At present sandbox is special in that it jumps in its
spl_board_load_image() call. This is not strictly correct, and means that
sandbox misses out some parts of board_init_r(), just as calling
bloblist_finish(), for example.

Change spl_board_load_image() to just identify the filename to boot, and
implement jump_to_image_no_args() to actually jump to it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26 08:25:37 -05:00
Simon Glass
65f3b1f992 sandbox: Filter arguments when starting U-Boot
The current method of starting U-Boot from U-Boot adds arguments to pass
the memory file through, so that memory is preserved. This is fine for a
single call, but if we call from TPL -> SPL -> U-Boot the arguments build
up and we have several memory files in the argument list.

Adjust the implementation to filter out arguments that we want to replace
with new ones. Also print a useful error if the exec() call fails.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26 08:25:37 -05:00
Simon Glass
fc1f58a4da sandbox: Use malloc() and free() from os layer
At present sandbox calls malloc() from various places in the OS layer and
this results in calls to U-Boot's malloc() implementation. It is better to
use the on in the OS layer, since it does not mix allocations with the
main U-Boot code.

Fix this by replacing calls with malloc() to os_malloc(), etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-26 08:25:37 -05:00
Simon Glass
7b5ea14527 sandbox: Refactor code to create os_jump_to_file()
At present os_jump_to_image() jumps to a given image, and this is written
to a file. But it is useful to be able to jump to a file also.

To avoid duplicating code, split out the implementation of
os_jump_to_image() into a new function that jumps to a file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26 08:25:36 -05:00
Simon Glass
d66ddafaf9 sandbox: Add a new 'sb' command
The old 'sb' command was deprecated in 2015 and replaced with 'host'. It
is useful to be able to access some internal sandbox state, particularly
for testing.

Resurrect the old command and provide a way to print some basic state
information (currently just the arguments to sandbox).

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26 08:25:36 -05:00
Simon Glass
1ca910be5d sandbox: Add an option to display of-platdata in SPL
At present we don't have a test that of-platdata can be accessed in SPL.
Add this in as a command-line option to SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26 08:25:35 -05:00
Simon Glass
566bf3a869 sandbox: Add a function to read a host file
Add a way to read a file from the host filesystem. This can be useful for
reading test data, for example. Also fix up the writing function which was
not the right version, and drop the debugging lines.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20 19:14:22 -07:00
Heinrich Schuchardt
9190a3eb80 sandbox: remove stray DEBUG
DEBUG should not be defined in production code.
Change printf() to debug() where this writes a debug message.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-20 19:14:22 -07:00
Simon Glass
bd8b74551b sandbox: Try to start the RAM buffer at a particular address
Use a starting address of 256MB which should be available. This helps to
make sandbox RAM buffers pointers more recognisable.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:27 -08:00
Simon Glass
4af3e9ad8a sandbox: Restore blocking I/O on exit
At present sandbox sets non-blocking I/O as soon as any input is read
from the terminal. However it does not restore the previous state on
exit. Fix this and drop the old os_read_no_block() function.

This means that we always enable blocking I/O in sandbox (if input is a
terminal) whereas previously it would only happen on the first call to
tstc() or getc(). However, the difference is likely not important.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:27 -06:00
Simon Glass
1c5a81d803 sandbox: Remove the old memory file later
When debugging sandbox it is sometimes annoying that the memory file is
deleted early on. If sandbox later crashes or we quit (using the
debugger), it is not possible to run it again with the same state since
the memory file is gone.

Remove the old memory file when sandbox exits, instead. Also add debugging
showing the memory filename.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:26 -06:00
Simon Glass
2b1dc29a12 sandbox: Add a flag to set the default log level
It is useful to be able to set the default log level from the command line
when running sandbox. Add a new -L command-line flag for this. The log
level is set using the enum log_level_t in log.h. At present a number must
be specified, e.g. -L7 for debug.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:26 -06:00
Simon Glass
69bc15d5ff sandbox: Support booting from TPL to SPL
At present we support booting from SPL to U-Boot proper. Add support for
the previous stage too, so sandbox can be started with TPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:26 -06:00
Simon Glass
056a5cea31 sandbox: Add a way to write data to the host filesystem
For debugging it is sometimes useful to write out data for inspection
using an external tool. Add a function which can write this data to a
given file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:26 -06:00
Simon Glass
50b288aca3 sandbox: Support file truncation with os_open()
At present files are not truncated on writing. This is a useful feature.
Add support for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:26 -06:00
Simon Glass
9f8037ea9c sandbox: Unprotect DATA regions in bus tests
On my Ubuntu 18.04.1 machine two driver-model bus tests have started
failing recently. The problem appears to be that the DATA region of the
executable is protected. This does not seem correct, but perhaps there
is a reason.

To work around it, unprotect the regions in these tests before accessing
them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-08 07:34:34 -06:00
Alexander Graf
6e6e4b2f73 sandbox: Allow to execute from RAM
With efi_loader, we may want to execute payloads from RAM. By default,
permissions on the RAM region don't allow us to execute from there though.

So let's change the default allocation scheme for RAM to also allow
execution from it. That way payloads that live in U-Boot RAM can be
directly executed.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
Alexander Graf
3fcb714758 sandbox: Fix setjmp/longjmp
In sandbox, longjmp returns to itself in an endless loop because
os_longjmp() calls into longjmp() which is provided by U-Boot which
again calls os_longjmp().

Setjmp on the other hand must not return because otherwise the
return freees up stack elements that we need during longjmp().

The only straight forward fix that doesn't involve nasty hacks I
could find is to directly link against the system setjmp/longjmp
implementations. That means we just provide the compiler with
hints that the symbol will be available and actually fill them
out with versions from libc.

This approach should be reasonably platform agnostic

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
Simon Glass
428aa0ca56 sandbox: Enhance map_to_sysmem() to handle foreign pointers
At present map_sysmem() maps an address into the sandbox RAM buffer,
return a pointer, while map_to_sysmem() goes the other way.

The mapping is currently just 1:1 since a case was not found where a more
flexible mapping was needed. PCI does have a separate and more complex
mapping, but uses its own mechanism.

However this arrange cannot handle one important case, which is where a
test declares a stack variable and passes a pointer to it into a U-Boot
function which uses map_to_sysmem() to turn it into a address. Since the
pointer is not inside emulated DRAM, this will fail.

Add a mapping feature which can handle any such pointer, mapping it to a
simple tag value which can be passed around in U-Boot as an address.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
Simon Glass
fe938fb0df sandbox: Add support for calling abort()
This function is useful to signal that the application needs to exit
immediate. It can be caught with a debugger (e.g. gdb). Add a stub for it
so that it can be called from within sandbox when an internal error
occurs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
Simon Glass
613185023f sandbox: Align RAM buffer to the machine page size
At present the sandbox RAM buffer is not aligned to any particular
address boundary. This makes the internal pointers somewhat random with
respect to the associated RAM buffer addresses.

Align the buffer to the page size of the machine to help with this. Note
that there is a header at the start of the allocated pointer. To avoid
returning a pointer which is not aligned to a page boundary, we waste
almost an entire page of memory for each allocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:30 +02:00
Simon Glass
7bf07cf872 Partially revert "efi_loader: Rename sections to allow for implicit data"
This partially reverts commit 7e21fbca26.

That change broke sandbox EFI support for unknown reasons. It also changes
sandbox to use--gc-sections which we don't want.

For now I am just reverting the sandbox portion as presumably this change
is safe on other architectures.

Fixes: 7e21fbca26 (efi_loader: Rename sections to allow for implicit data)
Signed-off-by: Simon Glass <sjg@chromium.org>
2018-08-23 16:17:41 -04:00
Alexander Graf
18e684dd4c sandbox: Move BSS after EFI sections
Something went wrong when writing the sandbox linker scripts and so we
ended up with a .bss section marker right before the efi runtime sections.

That obviously is a terrible idea, as it may result in overwriting efi
runtime code and data. So let's move the .bss identifier behind the efi
sections.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-20 11:39:19 +02:00
Tom Rini
406fd7e207 Patch queue for efi - 2018-07-25
Highlights this time:
 
   - Many small fixes to improve spec compatibility (found by SCT)
   - Almost enough to run with sandbox target
   - GetTime() improvements
   - Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbWHUwAAoJECszeR4D/txgKlUP/3Lu6pxScwzL7TsSD6OFZQ6M
 qQq2FH89XOA6/3r04RXrJZoHwOKIH5uj7ea6FlitpS1sQ4UOCQhp/lJJuJennHHj
 +veeuzI1sKTCX8Kd9ptrZDEF3G8lbF/zSyCFa1MOd1ONDVsTgSO9fOGmiqcC9FBF
 UrUH7dzXlE2CWs/mv/UikCBI7rYF+NOFJNuwHVXfsW4PyQ/7uaNsa7Rl3mXYb/Lr
 gjdcJkeHZAmFv/r84tGS9AFv+m0So9AGEYD7MeQDt02hSOuH9/nu4HgPmiwln3Fn
 3sFA3+daMrlFNi6kFw10S0sjKz94nN+Arm6cIXlvGaoc/wnPM2wEcKOSiXhzVM8d
 CoP/26N/ETRoI9P01C2WyTrKjo0O0aFwp3ubfmmbdcaKr/pyjAJgb3BnqXBfAr7T
 OjsE086jtHzdyKYKXDIz8+ZxSo4VsiDjBzDK7LVA0L5KtqAFFa+OYjlgEMJnQCk3
 YJfj+rhxfpjzFI7x5BAgq0q3XQRvAJS8QcUq+V2todQ3JkUlCIaVUNQLWAfNJN0q
 ze/WR8l4nwj5YFo8XiEbFHpQi/1bkR6cSzyjlBKUqrtHUUEu32vWlzZpNi6HzPMq
 cP7gehboFlcCSr8T2UMjBTE1LWI35eWNQQoiNRrS2UVcTH9h1vXMFV9PT+I82BBl
 ivJ+YwF9nU1JdS8CG3n7
 =ePTT
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2018-07-25

Highlights this time:

  - Many small fixes to improve spec compatibility (found by SCT)
  - Almost enough to run with sandbox target
  - GetTime() improvements
  - Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
2018-07-30 16:02:29 -04:00
Joe Hershberger
f40a31e695 sandbox: eth-raw: Add a SIMPLE_BUS to enumerate host interfaces
Ask the OS for each of its interfaces and for each one, bind a U-Boot
device and then probe it. This will allocate the priv data structure
that is then populated.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26 14:08:19 -05:00
Joe Hershberger
c9e2caff85 sandbox: eth-raw: Allow interface to be specified by index
With systemd stable interface names, eth0 will almost never exist.
Instead of using that name in the sandbox.dts, use an index.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26 14:08:18 -05:00
Joe Hershberger
ac13270b49 sandbox: eth-raw: Add a function to ask the host about localhost
Instead of doing a simple string compare against "lo", look for the flag
that indicates a localhost interface.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26 14:08:18 -05:00
Joe Hershberger
8c7988b6db net: sandbox-raw: Convert raw eth driver to livetree
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26 14:08:18 -05:00
Joe Hershberger
50ed0ef832 sandbox: eth-raw: Make sure descriptors are always initialized
If we let descriptors equal 0, we can end up closing STDIN. Make sure
they start out as -1.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26 14:08:17 -05:00
Joe Hershberger
97367df109 sandbox: eth-raw: Correct valid socket test in send/recv
In open, the socket is correctly checked to be -1 in the error case.
In send and recv, we checked for 0, but that is a valid socket number.

Correct this by checking for -1 as a bad socket everywhere.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26 14:08:17 -05:00
Alexander Graf
7e21fbca26 efi_loader: Rename sections to allow for implicit data
Some times gcc may generate data that is then used within code that may
be part of an efi runtime section. That data could be jump tables,
constants or strings.

In order to make sure we catch these, we need to ensure that gcc emits
them into a section that we can relocate together with all the other
efi runtime bits. This only works if the -ffunction-sections and
-fdata-sections flags are passed and the efi runtime functions are
in a section that starts with ".text".

Up to now we had all efi runtime bits in sections that did not
interfere with the normal section naming scheme, but this forces
us to do so. Hence we need to move the efi_loader text/data/rodata
sections before the global *(.text*) catch-all section.

With this patch in place, we should hopefully have an easier time
to extend the efi runtime functionality in the future.

Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: Fix x86_64 breakage]
2018-07-25 14:57:44 +02:00
Simon Glass
bb223b7f20 efi: sandbox: Add required linker sections
The EFI loader code requires certain linker sections to exist. Add these
for sandbox so that the EFI loader code will link.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:21 +02:00
Simon Glass
30eef21fa0 sandbox: Add a setjmp() implementation
Add an implementation of setjmp() and longjmp() which rely on the
underlying host C library. Since we cannot know how large the jump buffer
needs to be, pick something that should be suitable and check it at
runtime. At present we need access to the underlying struct as well.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:21 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Mario Six
c6b89f3180 sandbox: Add 64-bit sandbox
To debug device tree issues involving 32- and 64-bit platforms, it is useful to
have a generic 64-bit platform available.

Add a version of the sandbox that uses 64-bit integers for its physical
addresses as well as a modified device tree.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Added CONFIG_SYS_TEXT_BASE to configs/sandbox64_defconfig
Signed-off-by: Simon Glass <sjg@chromium.org>
2018-02-18 15:53:48 -07:00
Simon Goldschmidt
9095d5b894 fix spelling of 'functions' in 2 places (was 'funtcions')
Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
2018-02-13 23:24:22 -05:00
Simon Glass
0b189b6ce1 Revert "sandbox: remove os_putc() and os_puts()"
While sandbox works OK without the special-case code, it does result in
console output being stored in the pre-console buffer while sandbox starts
up. If there is a crash or a problem then there is no indication of what
is going on.

For ease of debugging it seems better to revert this change.

This reverts commit 47b98ad0f6.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07 15:17:00 -05:00
Heinrich Schuchardt
04d0da5157 sandbox: avoid memory leak in os_dirent_ls
Realloc does not free the old memory area if it fails.

Identified by cppcheck.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-08 20:41:09 -06:00
Paul Burton
f7ae1ca3e8 sandbox: Use asm-generic/io.h
Convert the sandbox architecture to make use of the new asm-generic/io.h
to provide address mapping functions. As sandbox actually performs
non-identity mapping between physical & virtual addresses we can't
simply make use of the generic mapping functions, but are able to
implement phys_to_virt() & make use of it from map_physmem().

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2017-10-02 21:52:24 -04:00
Bin Meng
0d1414bd97 sandbox: Add a dummy invalidate_dcache_range() function
This adds invalidate_dcache_range() so that some drivers can build
without error on sandbox.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:16 -04:00
Masahiro Yamada
47b98ad0f6 sandbox: remove os_putc() and os_puts()
They are unused since commit d8c6fb8ced ("sandbox: Drop special
case console code for sandbox").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-07-28 12:02:47 -06:00
Andy Yan
1fc50d727f sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation
SPL and normal u-boot stage use different malloc pool size
configuration before relocation, so use CONFIG_VAL(SYS_MALLOC_F_LEN)
to fit different boot stage.

Signed-off-by: Andy Yan <andyshrk@gmail.com>

Changes in v3:
- use CONFIG_VAL(), which suggested by Simon

Changes in v2: None

 arch/sandbox/cpu/start.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:04 +02:00
Simon Glass
2028cc59f7 sandbox: Stop printing platdata at the start of SPL
Currently we have code which prints out platform data at the start of SPL.
Now that we have tests for dtoc this is probably not necessary. Drop it.
Update test_ofplatdata to check for empty output since it is useful to
check that sandbox_spl works as expected.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11 10:08:20 -06:00
Tom Rini
e2bc87d41c sandbox: Fix comparison of unsigned enum expression warning
In os_dirent_get_typename() we are checking that type falls within the
known values of the enum os_dirent_t.  With clang-3.8 testing this value
as being >= 0 results in a warning as it will always be true.  This
assumes of course that we are only given valid data.  Given that we want
to sanity check the input, we change this to check that it falls within
the range of the first to the last entry in the given enum.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-08 20:21:59 -06:00
Simon Glass
c87dc38d8f bootstage: Require timer_get_boot_us() to be defined
At present we provide a default version of this function for use by
bootstage. However it uses the system timer and therefore likely requires
driver model. This makes it impossible to time driver-model init.

Drop the function and require boards to provide their own. Add a sandbox
version also. There is a default implememtation in lib/time.c for boards
which use CONFIG_SYS_TIMER_COUNTER.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 14:13:04 -04:00
Simon Glass
34b744beb8 sandbox: Add a way to reset sandbox state for tests
Running a new test should reset the sandbox state to avoid tests
interferring with each other. Move the existing state-reset code into a
function so it can be used from tests.

Also update the code to reset the SPI devices and adjust the test code to
call it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:09 -06:00
Simon Glass
9d922450aa dm: Use dm.h header when driver mode is used
This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
present

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 06:57:52 -06:00
Simon Glass
689697785e board_f: sandbox: Move sandbox_early_getopt_check() into misc_init_f()
We don't need a special hook for sandbox as one of the later ones will do
just as well. We can print error messages about bad options after we
print the banner. In fact, it seems better.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:55:07 -04:00
Simon Glass
bb967240bb board_f: sandbox: Move setup_ram_buf() to private code
There is no need to have this call in the generic init sequence and no
other architecture has needed it in the time it has been there. Move it
into sandbox's private code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05 13:52:35 -04:00
Simon Glass
f831b8e4a4 spl: sandbox: Drop spl_board_announce_boot_device()
This function is not used anymore. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09 08:40:18 -05:00
Simon Glass
ebc4ef61d7 spl: Add a name to the SPL load-image methods
It is useful to name each method so that we can print out this name when
using the method. Currently this happens using a separate function. In
preparation for unifying this, add a name to each method.

The name is only available if we have libcommon support (i.e can use
printf()).

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09 08:40:13 -05:00
Stefan Brüns
2f159402d9 sandbox/fs: Set correct filetype for unknown filetype
The "hostfs ls" command prefixes each directory entry with either DIR,
LNK or "   " if it is a directory, symlink resp. regular file, or
"???" for any other or unknown type.
The latter only works if the type is set correctly, as the entry defaults
to OS_FILET_REG and e.g. socket files show up as regular files.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:08 -06:00
Stefan Brüns
bf635ed091 sandbox/fs: Use readdir instead of deprecated readdir_r
Using readdir_r limits the maximum file name length and may even be
unsafe, and is thus deprecated in since glibc 2.24.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:07 -06:00
Stefan Brüns
f189899c2f sandbox/fs: Use correct size path name buffer
The readdir linux manpage explicitly states (quoting POSIX.1) that
sizeof(d_name) is not correct for determining the required size, but to
always use strlen. Grow the buffer if needed.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:07 -06:00
Stefan Brüns
ce2ec19c56 sandbox/fs: Make linking of nodes in os_dirent_ls more obvious
Previously, after reading/creating the second dirent, the second entry
would be chained to the first entry and the first entry would be linked
to head. Instead, immediately link the first entry to head.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11 10:17:07 -06:00