Commit graph

33744 commits

Author SHA1 Message Date
Francois Retief
a50adb7b4d sparc: Update LEON serial drivers to use readl/writel macros
Update the LEON2/3 serial driver to make use of the readl and writel
macros as well as the WATCHDOG_RESET() macro.

Add readl/writel and friends to the asm/io.h file.

Introduce the gd->arch.uart variable to store register address.

Lastly, remove baudrate scaler macro variables from board config. It
is now calculated in the serial driver using the global data variable.

Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-11-13 10:23:32 +02:00
Francois Retief
c33759aebd sparc: Add -mcpu= compiler flags for LEON2/LEON3
Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-11-13 10:23:32 +02:00
Francois Retief
fdf075fbee sparc: Update the maintainer for SPARC architecture
Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-11-13 10:23:32 +02:00
Francois Retief
72bcbd4bfb sparc: Fix broken files during license changes
Fixes broken search and replaced license changes in
files cpu/leon3/start.S and include/asm/winmacro.h
from commit 1a4596601f

Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>

Series-to: u-boot
Series-cc: Tom Rini <trini@konsulko.com>
Series-version: 2
Cover-letter:
sparc: Updates to SPARC architecture in preperation for generic board

This patch series is a backlog of preparation work for upcomming
generic board changes.

I first want to get these reviewed and submitted to mainline before
sending out more patches.
END
2015-11-13 10:22:49 +02:00
Fabio Estevam
9ac4fc8207 board_init: Change the logic to setup malloc_base
Prior to commit 5ba534d247 ("arm: Switch 32-bit ARM to using generic
global_data setup") we used to have assembly code that configured the
malloc_base address.

Since this commit we use the board_init_f_mem() function in C to setup
malloc_base address.

In board_init_f_mem() there was a deliberate choice to support only
early malloc() or full malloc() in SPL, but not both.

Adapt this logic to allow both to be used, one after the other, in SPL.

This issue has been observed in a Congatec board, where we need to
retrieve the manufacturing information from the SPI NOR (the SPI API
calls malloc) prior to configuring the DRAM. In this case as malloc_base
was not configured we always see malloc to fail.

With this change we are able to use malloc in SPL prior to DRAM gets
initialized.

Also update the CONFIG_SYS_SPL_MALLOC_START entry in the README file.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-12 20:34:07 -05:00
Tom Rini
bc80109b11 Merge branch 'master' of git://git.denx.de/u-boot-tegra 2015-11-12 19:32:51 -05:00
Vignesh R
42d1b818a8 am43xx_evm: Add DFU support for qspi flash
This adds support to update firmware on qspi flash present on
am437x-sk-evm and am43xx-epos-evm via DFU.

On device:
=> setenv dfu_alt_info ${dfu_alt_info_qspi}
=> dfu 0 sf 0:0

On host:
$ sudo dfu-util -l
$ sudo dfu-util -D u-boot.bin -a u-boot.bin

Signed-off-by: Vignesh R <vigneshr@ti.com>
2015-11-12 18:13:21 -05:00
Michal Simek
8d7a2b83f9 spl: Add support for CONFIG_OF_EMBED=y
CONFIG_OF_EMBED=y is the option which is here only for testing purpose
and shouldn't be enabled by default as is describe at:
"dts: Add a comment about CONFIG_OF_EMBED being for local use"
(sha1: 3d3f60cb7a)

But still enabling this option locally shouldn't end up with compilation
error when you build SPL. This patch fix it.

Compilation error:
lib/built-in.o: In function `fdtdec_setup':
/mnt/disk/u-boot/lib/fdtdec.c:1246: undefined reference to
`__dtb_dt_begin'

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reported-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-12 18:13:21 -05:00
Guillaume REMBERT
87da2690ab openrisc: updating build tools naming convention
Dear u-boot community,

I just made a small change on the openrisc-generic platform
configuration to take in account the new naming convention (or1k instead
of or32, so the build process gets fine).

Could you take care to review and approve the following patch, please?

Kind regards,
2015-11-12 18:13:20 -05:00
Andy Fleming
ca746f044e Fix trini email in the get_maintainer.pl script
Looks like one spot got missed. Probably due to the backslash.

Signed-off-by: Andy Fleming <afleming@gmail.com>
2015-11-12 18:13:20 -05:00
Vincent BENOIT
5ea667ea2f pengwyn: nand and ethernet fixes
-> Add National instrument ethernet transceiver configuration used (DP83848)
-> Change cpsw slave phy address
-> modify nand configuration to use the correct ECC and correct nand features
2015-11-12 18:13:19 -05:00
Fabio Estevam
4408248146 block: ahci: Remove dead code
CONFIG_AHCI_SETFEATURES_XFER is not selected by any user, so delete
the dead code.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-12 18:13:19 -05:00
Peng Fan
7664846bbb common: Simplify get_clocks() #ifdef
get_clocks is wrapped by CONFIG_FSL_CLK and CONFIG_M68K in seperate
piece code. They can be merged into one snippet.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: "angelo@sysam.it" <angelo@sysam.it>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: "Andreas Bießmann" <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Angelo Dureghello <angelo@sysam.it>
2015-11-12 18:13:19 -05:00
Matwey V. Kornilov
755324c432 configs: Use config_distro_defaults.h in ti_armv7_common.h
CONFIG_BOOTDELAY is defined in config_distro_defaults.h

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
[trini: Drop omap3_logic.h settings which were a warning and no longer
        correct usage].
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-12 18:12:56 -05:00
Dirk Eibach
daa75b3482 i2c: Fix pca953x endianess issue
By reading 2 consecutive bytes from i2c to an u16 value
we have an endianess issue.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 18:04:12 -05:00
Dirk Eibach
37b33254c2 i2c: soft_i2c: Fix bus indizes
Since busses are sorted in alphabetical order, introducing more
than nine busses led to unexpected behaviour.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 18:04:12 -05:00
Dirk Eibach
acff73fda0 board: gdsys: Enable osd on output only
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 18:04:11 -05:00
Dirk Eibach
da4833c7bf board: gdsys: Add osdsize command
osdsize adjusts the gdsys IHS osd dimensions in characters.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 18:04:11 -05:00
Dirk Eibach
5c3b6dc1fb hrcon: Add fan controllers
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 18:04:10 -05:00
Dirk Eibach
7ed45d3d0a hrcon: Add support for the DH variant
hrcon DH(dual head) has two video outputs per FPGA.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 18:04:10 -05:00
Dirk Eibach
b847f5b622 hrcon: Fix videoboard i2c setup
- i2c addresses for the videoboard port expanders were
  wrong.
- the fpga reset signal was not initialized.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 18:04:09 -05:00
Dirk Eibach
d4e5888801 hrcon: Use generic ioep-fpga support
The strider platform moved some generic code into ioep-fpga.c.
Make use of that on hrcon platform.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 18:04:09 -05:00
Dirk Eibach
a3f9d6c779 mpc83xx: Add strider board
The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.

On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-12 18:03:48 -05:00
Dirk Eibach
51b96fc67c hrcon: Remove CH7301 configuration
hrcon has no CH7301 DVI-transmitter.
Probably not removed when copying from iocon.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 15:59:05 -05:00
Reinhard Pfau
57b84a0d5a iocon: reset FPGAs in last_stage_init()
- Reset FPGAs in last_stage_init()

Signed-off-by: Reinhard Pfau <pfau@gdsys.de>
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 15:59:05 -05:00
Dirk Eibach
1c7639ae8a controlcenterd: Disable sideband clocks
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 15:59:04 -05:00
Dirk Eibach
e1d1127a9a dlvision-10g: Support displayport
Support dlvision-10g hardware with displayport output.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 15:59:04 -05:00
Dirk Eibach
d054c2f8c6 board: gdsys: Consider DP501 limits on link training
DP501 only supports DP 1.1a.
Limit settings for link bandwidth and lane count to
values allowed by DP 1.1a.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 15:59:03 -05:00
Dirk Eibach
2302fd32a5 board: gdsys: Increase DP501 I2C retry interval
With Club 3D dual link adapter there are AUX-channel timeouts
when EDID is read. Increasing retry interval time to max (400us)
fixes this.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-11-12 15:59:03 -05:00
Dirk Eibach
0caad193cd board: gdsys: Configure DP501 SPDIF input
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-11-12 15:59:02 -05:00
Dirk Eibach
457491565b i2c: ihs_i2c: Fix hold_bus control
Bus has to be held for repeated start regardless of
read/write access.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Acked-by: Heiko Schocher <hs@denx.de>
2015-11-12 15:59:02 -05:00
Dirk Eibach
3af0cdb137 i2c: ihs_i2c: Use macro bestpractices
Reinhard Pfau complained that macros in ihs_i2c do not follow best practices.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Acked-by: Heiko Schocher <hs@denx.de>
2015-11-12 15:59:01 -05:00
Dirk Eibach
071be89694 i2c: ihs_i2c: Dual channel support
Support two i2c masters per FPGA.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Acked-by: Heiko Schocher <hs@denx.de>
2015-11-12 15:59:01 -05:00
Prabhakar Kushwaha
5b47d407e4 driver: net: Fix pointer conversion warnings for xilinx_zynqmp_ep
Fix below warnings happening for xilinx_zynqmp_ep_defconfig

drivers/net/zynq_gem.c: In function ‘zynq_gem_init’:
drivers/net/zynq_gem.c:330:7: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
      ((u32)(priv->rxbuffers) +
       ^
In file included from drivers/net/zynq_gem.c:19:0:
drivers/net/zynq_gem.c:336:10: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
   writel((u32)priv->rx_bd, &regs->rxqbase);
          ^
./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’
 #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
                                  ^
drivers/net/zynq_gem.c: In function ‘zynq_gem_send’:
drivers/net/zynq_gem.c:399:9: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  writel((u32)priv->tx_bd, &regs->txqbase);
         ^
./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’
 #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
                                  ^
drivers/net/zynq_gem.c:404:22: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  priv->tx_bd->addr = (u32)ptr;
                      ^
drivers/net/zynq_gem.c:409:9: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  addr = (u32) ptr;
         ^
drivers/net/zynq_gem.c:414:9: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  addr = (u32)priv->rxbuffers;
         ^
drivers/net/zynq_gem.c: In function ‘zynq_gem_recv’:
drivers/net/zynq_gem.c:454:31: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
   net_process_received_packet((u8 *)addr, frame_len);
                               ^
drivers/net/zynq_gem.c: In function ‘zynq_gem_initialize’:
drivers/net/zynq_gem.c:533:35: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE);
                                   ^
drivers/net/zynq_gem.c:533:16: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
  priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE);

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2015-11-12 15:59:00 -05:00
Prabhakar Kushwaha
b30dc5792d driver: usb: Fix pointer conversion warnings for hikey
Fix below compilation warings happening for hikey_defconfig

drivers/usb/eth/smsc95xx.c:698:56: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg);
                                                        ^
include/common.h:109:26: note: in definition of macro ‘debug_cond’
    printf(pr_fmt(fmt), ##args); \
                          ^
drivers/usb/eth/smsc95xx.c:698:2: note: in expansion of macro ‘debug’
  debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg);
  ^
drivers/usb/eth/smsc95xx.c:718:2: warning: format ‘%u’ expects argument of
type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ [-Wformat=]
  debug("Tx: len = %u, actual = %u, err = %d\n",
  ^
drivers/usb/eth/smsc95xx.c: In function ‘smsc95xx_recv’:
drivers/usb/eth/smsc95xx.c:802:19: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
   cur_buf_align = (int)buf_ptr - (int)recv_buf;
                   ^
drivers/usb/eth/smsc95xx.c:802:34: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
   cur_buf_align = (int)buf_ptr - (int)recv_buf;

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2015-11-12 15:59:00 -05:00
Prabhakar Kushwaha
41f7be3c78 driver: dwmmc: Fix pointer conversion warnings for hikey
Fix below compilation warings happening for hikey_defconfig

drivers/mmc/dw_mmc.c: In function ‘dwmci_set_idma_desc’:
drivers/mmc/dw_mmc.c:43:20: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac);
                    ^
drivers/mmc/dw_mmc.c: In function ‘dwmci_prepare_data’:
drivers/mmc/dw_mmc.c:61:35: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac);
                                   ^
drivers/mmc/dw_mmc.c:73:9: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
         (u32)bounce_buffer + (i * PAGE_SIZE));
         ^
  CC      drivers/mmc/hi6220_dw_mmc.o
drivers/mmc/hi6220_dw_mmc.c: In function ‘hi6220_dwmci_add_port’:
drivers/mmc/hi6220_dw_mmc.c:51:17: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
  host->ioaddr = (void *)regbase;

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2015-11-12 15:59:00 -05:00
Prabhakar Kushwaha
4e4ad6d140 driver: gpio: hikey: Fix pointer conversion warnings for hikey
Fix below compilation warnings-
drivers/gpio/hi6220_gpio.c: In function ‘hi6220_gpio_probe’:
drivers/gpio/hi6220_gpio.c:82:15: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
  bank->base = (u8 *)plat->base;

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2015-11-12 15:58:59 -05:00
Siarhei Siamashka
5e0efc1bc6 mmc: Use lldiv() for 64-bit division in write_raw_image()
This fixes compilation problems when using a hardfloat toolchain on
ARM, which manifest themselves as "libgcc.a(_udivmoddi4.o) uses
VFP register arguments, u-boot does not".

These problems have been reported in the U-Boot mailing list:
    http://lists.denx.de/pipermail/u-boot/2015-October/230314.html
    http://lists.denx.de/pipermail/u-boot/2015-October/231908.html

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-12 15:58:59 -05:00
Patrick Delaunay
bcb41dcaef uuid: add selection by string for known partition type GUID
short strings can be used in type parameter of gpt command
to replace the guid string for the types known by u-boot

      partitions = name=boot,size=0x6bc00,type=data; \
                   name=root,size=0x7538ba00,type=linux;
      gpt write mmc 0 $partitions

and they are also used to display the type of partition
in "part list" command

  Partition Map for MMC device 0  --   Partition Type: EFI

  Part	Start LBA	End LBA		Name
	Attributes
	Type GUID
	Partition GUID
    1	0x00000022	0x0000037f	"boot"
	attrs:	0x0000000000000000
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	type:	data
	guid:	d117f98e-6f2c-d04b-a5b2-331a19f91cb2
    2	0x00000380	0x003a9fdc	"root"
	attrs:	0x0000000000000000
	type:	0fc63daf-8483-4772-8e79-3d69d8477de4
	type:	linux
	guid:	25718777-d0ad-7443-9e60-02cb591c9737

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2015-11-12 15:58:58 -05:00
Patrick Delaunay
7561b258a1 gpt: add optional parameter type in gpt command
code under flag CONFIG_PARTITION_TYPE_GUID
add parameter "type" to select partition type guid

example of use with gpt command :

  partitions = uuid_disk=${uuid_gpt_disk}; \
      name=boot,size=0x6bc00,uuid=${uuid_gpt_boot}; \
      name=root,size=0x7538ba00,uuid=${uuid_gpt_root}, \
         type=0fc63daf-8483-4772-8e79-3d69d8477de4;

  gpt write mmc 0 $partitions

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2015-11-12 15:58:58 -05:00
Patrick Delaunay
b38c108a98 part:efi: add GUID for linux file system data
Previously, Linux used the same GUID for the data partitions as Windows
(Basic data partition: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7).
This created problems when dual-booting Linux and Windows in UEFI-GPT
Setup, so a new GUID (Linux filesystem data:
0FC63DAF-8483-4772-8E79-3D69D8477DE4) was defined jointly by GPT fdisk
and GNU Parted developers.

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2015-11-12 15:58:57 -05:00
Cheng Gu
3526285068 pci: fix checking PCI_REGION_MEM in pci_hose_phys_to_bus()
When converting between PCI bus and phys addresses, a two pass search
was introduced with preference to non-PCI_REGION_SYS_MEMORY regions.
See commit 2d43e873a2.

However, since PCI_REGION_MEM is defined as 0, the if statement was
always asserted true: ((flags & PCI_REGION_MEM) == PCI_REGION_MEM)

This patch uses PCI_REGION_TYPE bit to check if the region is
PCI_REGION_MEM: ((flags & PCI_REGION_TYPE) == PCI_REGION_MEM)

Signed-off-by: Cheng Gu <chenggu@marvell.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-12 13:19:03 -05:00
Tom Rini
78e9e71c83 include/linux/mtd: Update copyright notices
Condense these updates down to SPDX tags too while doing this.  This is
a port of a1452a3771c4eb85bd779790b040efdc36f4274e from the Linux
Kernel.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-12 13:19:03 -05:00
robertcnelson@gmail.com
9606f71002 board/ti/am335x: beaglebone stop muxing i2c1_pin_mux
On the BeagleBone these i2c1 pins are routed to the expanasion header, where
they can be defined as either pr1_usart0_Xxd/pwm0/spi0/i2c1, dont assume i2c1

Fixes: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/313894/1387696

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com>
CC: Tom Rini <trini@konsulko.com>
2015-11-12 13:19:02 -05:00
Maxime Ripard
a78ebb10a9 sunxi: cubietruck: Enable the USB OTG controller
The Cubietruck has a mini-USB connector that can be used to power up the
board and as an OTG connector.

Since we have already some USB host-only ports right beside this one,
enable it in gadget mode

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-12 13:19:01 -05:00
Maxime Ripard
4257c5036a sunxi: A13-Olinuxino: Enable the USB OTG controller
The A13-Olinuxino has a mini-USB connector that can be used to power up
the board and as an OTG connector.

Since we have already some USB host-only ports right beside this one,
enable it in gadget mode

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-12 13:19:00 -05:00
Maxime Ripard
3d4ef38de2 sparse: Rename the file and header
The Android sparse image format is currently supported through a file
called aboot, which isn't really such a great name, since the sparse image
format is only used for transferring data with fastboot.

Rename the file and header to a file called "sparse", which also makes it
consistent with the header defining the image structures.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-12 13:18:59 -05:00
Maxime Ripard
6fb77c48e4 fastboot: nand: Add pre erase and write hooks
Some devices might need to do some per-partition initialization
(ECC/Randomizer settings change for example) before actually accessing it.

Add some hooks before the write and erase operations to let the boards
define what they need to do if needed.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-12 13:18:58 -05:00
Maxime Ripard
bf8940d35b fastboot: Implement NAND backend
So far the fastboot code was only supporting MMC-backed devices for its
flashing operations (flash and erase).

Add a storage backend for NAND-backed devices.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-12 13:18:58 -05:00
Maxime Ripard
1f8690aa95 sparse: Implement several chunks flashing
The fastboot client will split the sparse images into several chunks if the
image that it tries to flash is bigger than what the device can handle.

In such a case, the bootloader is supposed to retain the last offset to
which it wrote to, so that it can resume the writes at the right offset
when flashing the next chunk.

Retain the last offset we used, and use the session ID to know if we need
it or not.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-12 13:17:32 -05:00