Commit graph

353 commits

Author SHA1 Message Date
Siddarth Gore
16b76705d3 Marvell GuruPlug Board Support
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot

References:
http://www.globalscaletechnologies.com/t-guruplugdetails.aspx
http://plugcomputer.org

This patch is for GuruPlug Plus, but it supports Standard version
as well.

Signed-off-by: Siddarth Gore <gores@marvell.com>
2010-04-30 05:23:24 -05:00
Heiko Schocher
bbe310922f arm, i.mx27: add support for magnesium board from projectiondesign
This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h

Signed-off-by: Heiko Schocher <hs@denx.de>
2010-04-30 05:23:23 -05:00
Wolfgang Denk
8e98f5f70b Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx 2010-04-27 23:02:12 +02:00
Thomas Chou
8cbb0ddd7e nios2: add nios2-generic board
This is a generic approach to port u-boot for nios2 boards.
You may find the usage of this approach on the nioswiki,
http://nioswiki.com/DasUBoot

A fpga parameter file, which contains base address information
and drivers declaration, is generated from Altera's hardware system
description sopc file using tools.

The example fpga parameter file is compatible with EP1C20, EP1S10
and EP1S40 boards. So these boards can be removed after this commit.
Though epcs controller is removed to cut the dependency of altera_spi
driver.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24 18:21:23 -04:00
Anatolij Gustschin
a3921eefa1 mpc5121: add support for PDM360NG board
PDM360NG is a MPC5121E based board by ifm ecomatic gmbh.

Signed-off-by: Michael Weiss <michael.weiss@ifm.com>
Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24 22:56:37 +02:00
Wolfgang Denk
fd4e49c189 Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2010-04-10 23:59:39 +02:00
Andre Schwarz
1f2463d764 Add initial support for Matrix Vision mvSMR board based on MPC5200B.
Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
2010-04-10 00:06:05 +02:00
Brent Kandetzki
3f1a5c1655 Blackfin: IP04: new board port
A low cost 4 port IP-PBX board.

Signed-off-by: Brent Kandetzki <BrentK@teleco.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-07 01:11:17 -04:00
Minkyu Kang
2ca551dd7a MAINTAINERS: sort the list of ARM Maintainers by last name
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-04-03 15:24:25 -05:00
Vipin KUMAR
c937c42431 SPEAr : Adding maintainer name for spear SoCs
Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
2010-04-03 15:24:25 -05:00
Wolfgang Wegner
9d79e5758c add ASTRO MCF5373L board
This patch adds support for ASTRO board(s) based on MCF5373L.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
2010-03-24 11:08:28 -05:00
Detlev Zundel
fd428c05c8 mpc5xxx: Remove all references to MGT5100
We do not support a processor that never reached a real customer.

Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-03-21 22:44:42 +01:00
Detlev Zundel
9c9cbe78dc mpc82xx: Remove SL8245 board and the now orpahned sk98lin network driver.
This code has compile problems and the company does not even exist any
more.  So we take the liberty to drop support for it.

Signed-off-by: Detlev Zundel <dzu@denx.de>
CC: Wolfgang Denk <wd@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>
2010-03-12 09:49:23 +01:00
Heiko Schocher
67fa8c25f5 arm: add support for the suen3 board from keymile
Add support for the ARM part of the mgcoge2, named suen3.
This board is based on the Marvell Kirkwood (88F6281) SoC.
As there come more board variants, common config options
are collected in include/configs/km_arm.h. Also, this board
use common code for all keymile boards, which is stored in
board/keymile/common/common.c

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Heiko Schocher <hs@denx.de>
2010-03-07 12:36:36 -06:00
John Rigby
6895d4510a Add support for KARO TX25 board
This is an i.MX25 base board with only NAND
so it uses nand_spl to boot.

Signed-off-by: John Rigby <jcrigby@gmail.com>

Tune configuration, add support for (redundant) environment in NAND.
Signed-off-by: Wolfgang Denk <wd@denx.de>

Acked-by: Wolfgang Denk <wd@denx.de>
CC: Fred Fan <fanyefeng@gmail.com>
CC: Tom <Tom.Rix@windriver.com>
2010-03-07 12:36:36 -06:00
Stefano Babic
c5fb70c911 Add initial support for Freescale mx51evk board
The patch adds initial support for the Freescale mx51evk board.
Network (FEC) and SD controller (fsl_esdhc) are supported.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Fred Fan <fanyefeng@gmail.com>
2010-03-07 12:36:36 -06:00
Jens Scharsig
77e7273c40 new board (eb_cpux9k2)
* new board (eb_cpux9k2)
 * support for EB+CPUx9K2 board by BuS Elektronik GmbH & Co. KG
 * select via make eb_cpux9k2_config
 * this also demonstrates, how to use boards with AT91RM9200 cpu
   in at91 arch tree

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-02-12 12:36:04 -06:00
Matthias Kaehlcke
cf3c142ee4 Add support for EDB93xx boards
Added support for the following EDB93xx boards:

EDB9301
EDB9302
EDB9302A
EDB9307
EDB9307A
EDB93012
EDB9315
EDB9315A

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
2010-02-12 12:31:54 -06:00
Daniel Gorsulowski
44d8025622 at91: Add esd gmbh OTC570 board support
This patch adds support for esd gmbh OTC570 board.
The OTC570 is based on an Atmel AT91SAM9263 SoC.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2010-02-12 12:31:53 -06:00
Wolfgang Denk
d0750bc9e5 EXBITGEN: drop support for unmaintained board
The EXBITGEN board has not been maintained for a long time; it has
build problems, but no hardware is available any more for testing.

Drop support for this board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2010-02-03 20:01:16 +01:00
Alessandro Rubini
b9e6957ca1 MAINTAINERS: fix nhk8815 board name
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
2010-01-19 00:32:53 +01:00
Harald Krapfenbauer
2aeda2d054 Blackfin: tcm-bf518: new board port
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:27 -05:00
Michael Hennerich
10eafa10be Blackfin: add support for BF527-EZKIT v2.1
The new board revision has a different LCD.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:27 -05:00
Valentin Yakovenkov
446707c90f Blackfin: bf561-acvilon: new board port
Signed-off-by: Valentin Yakovenkov <yakovenkov@niistt.ru>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:26 -05:00
Reinhard Arlt
1dee9be683 mpc83xx: Add support for MPC8349 esd caddy2
The caddy2 is a variant of the already supported vme8349. So we just
add the differences to this board port. To better support those two
boards we switched from fixed SDRAM configuration to usage of
spd_sdram(). This is done by providing a board specific SPD EEPROM
routine with different values for both boards.

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

changed to use mkconfig -t option instead, plus misc codingstyle fixes.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-01-07 18:34:31 -06:00
Wolfgang Denk
2a49bf3149 Merge branch 'master' into next
Conflicts:
	board/esd/plu405/plu405.c
	drivers/rtc/ftrtc010.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-12-05 02:11:59 +01:00
Wolfgang Denk
deec1fbd4f MAINTAINERS: update responsible for MPC85xx/86xx
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Becky Bruce <beckyb@kernel.crashing.org>
2009-12-02 22:27:26 +01:00
Po-Yu Chuang
43a5f0df2f arm: A320: Add support for Faraday A320 evaluation board
This patch adds support for A320 evaluation board from Faraday. This board
uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM.
FA526 is an ARMv4 processor and uses the ARM920T source in this patch.

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2009-11-27 16:26:17 -06:00
Sekhar Nori
2819e1365b TI DA8xx: Integrate DA830 EVM support into U-Boot
Integrate DA830 EVM support into U-Boot.

Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum
Digital EVM board. See http://www.spectrumdigital.com/

Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
2009-11-27 16:26:16 -06:00
Wolfgang Grandegger
cd12f615e4 mpc52xx: add support for the IPEK01 board
This patch adds support for the board IPEK01 based on the MPC5200.
The Futjitsu Lime graphics controller is configured in 16 bpp mode.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
2009-10-31 16:14:35 +01:00
Tom Rix
e63e5904b4 TI OMAP3 SDP3430: Initial Support
Start of support of
Texas Instruments Software Development Platform(SDP)
for OMAP3430 - SDP3430

Highlights of this platform are:
Flash Memory devices:
	Sibley NOR, Micron 8bit NAND and OneNAND
Connectivity:
	3 UARTs and expanded 4 UART ports + IrDA
	Ethernet, USB
Other peripherals:
	TWL5030 PMIC+Audio+Keypad
	VGA display
Expansion ports:
	Memory devices plugin boards (PISMO)
	Connectivity board for GPS,WLAN etc.
Completely configurable boot sequence and device mapping
etc.

Support default jumpering and:
 - UART1/ttyS0 console(legacy sdp3430 u-boot)
 - UART3/ttyS2 console (matching other boards,
		 and SDP HW docs)
 - Ethernet
 - mmc0
 - NOR boot

Currently the UART1 is enabled by default.  for
compatibility with other OMAP3 u-boot platforms,
enable the #define of CONSOLE_J9.

Conflicts:

	Makefile

Fixed the conflict with smdkc100_config by moving omap_sdp3430_config
to it is alphabetically sorted location above zoom1.

Signed-off-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-24 09:55:25 -05:00
Sandeep Paulraj
c73607c552 TI DaVinci: Maintainer for DM355 and DM365 EVM
Adding entries to the MAINTAINERS directory for the
DM355 and DM365 EVM.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:22 -05:00
Sandeep Paulraj
5df65cf56a TI: DaVinci: DM355 Leopard board support
This patch adds support for the leopard board which is
based on the DM355 SOC.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:21 -05:00
Sandeep Paulraj
6ab176d709 TI DaVinci DM646x: Adding initial support for DM6467 EVM
This patch adds the initial support for DM6467 EVM.
Other features like NET and NAND support will be added as follow up patches.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-10-18 16:42:21 -05:00
Minkyu Kang
8bc4ee9e82 s5pc1xx: add support SMDKC100 board
Adds new board SMDKC100 that uses s5pc100 SoC

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
2009-10-13 21:13:55 -05:00
Simon Kagstrom
e92daeb5c2 Support for the OpenRD base board
The implementation is borrowed from the sheevaplug board and the Marvell
1.1.4 code. Unsupported (or untested) is the SD card, PCIe and SATA.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
2009-10-13 06:17:36 -05:00
Tom Rix
23b80982a0 Add support for Eukrea CPU9260/CPU9G20 SBC
these boards are built around Atmel's AT91SAM9260/9G20 and have
up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
and include a 10/100 Ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-13 06:17:35 -05:00
Tom Rix
d8380c9d35 Add support for Eukrea CPUAT91 SBC
CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR
flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII
mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-13 06:17:35 -05:00
Wolfgang Denk
041a6a0c2e Merge branch 'master' of git://git.denx.de/u-boot-microblaze 2009-09-15 21:45:50 +02:00
Michal Simek
13916abf99 microblaze: Remove AtmarkTechno Suzaku board
Users should use microblaze-generic platform.
This platform is longer not supported.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-14 14:40:04 +02:00
Dirk Eibach
4c1883670a ppc4xx: Rename compactcenter to intip
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-11 10:37:47 +02:00
Wolfgang Denk
3ea43ff773 Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-09-07 23:12:46 +02:00
Frederik Kriewitz
c35d7cf071 Add support for the DevKit8000 board
This patch adds support for the DevKit8000 board.

Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu>
2009-09-05 01:33:14 +02:00
Harald Krapfenbauer
4640c2b869 Blackfin: cm-bf537u: new board port
The CM-BF537U is similar to the CM-BF537E module, but enough to need its
own board port.

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-02 05:58:37 -04:00
Albin Tonnerre
2dc851e3b0 Support for the Calao TNY-A9260/TNY-A9G20 boards
The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by
Calao Systems <http://www.calao-systems.com>. Their components are very
similar to the AT91SAM9260EK board, so their configuration is based on
the configuration of this board. There are however some differences:
different clocks, no LCD, no ethernet. They also can use SPI EEPROM to
store the environment.

Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-09-01 22:35:58 +02:00
Albin Tonnerre
9453967e28 Add support for the Calao SBC35-A9G20 board
The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems
<http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC
running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard
battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND
flash, two USB host ports, and an USB device port. More informations can be
found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936>

Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
2009-09-01 22:13:37 +02:00
Ilya Yanok
10bc241dfc imx27lite: add support for imx27lite board from LogicPD
This patch adds support for i.MX27-LITEKIT development board from
LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND
flash, FEC ethernet controller integrated into i.MX27.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Wolfgang Denk <wd@denx.de>
2009-09-01 22:10:55 +02:00
Poonam Aggrwal
728ece343e 85xx: Add support for P2020RDB board
The code base adds P1 & P2 RDB platforms support.
The folder and file names can cater to future SOCs of P1/P2 family.
P1 & P2 processors are 85xx platforms, part of Freescale QorIQ series.

Tested following on P2020RDB:
1. eTSECs
2. DDR, NAND, NOR, I2C.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Eric Millbrandt
5b53b29bc2 Add support for the galaxy5200
Add support for the DEKA Research and Development galaxy5200 board

The galaxy5200 is an Freescale mpc5200 based embedded industrial
control board.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
2009-08-25 12:57:55 +02:00
Wolfgang Denk
d7b0781e2b Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2009-07-29 09:25:52 +02:00