Commit graph

45 commits

Author SHA1 Message Date
Simon Glass
ce22c5bbee dm: gpio: Allow GPIO uclass to be used in SPL
Now that we support driver model in SPL, allow GPIO drivers to be used there
also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:23 -06:00
Bhuvanchandra DV
d348a943e7 dm: gpio: vf610: Add GPIO driver support
Add GPIO driver support to Freescale VF610

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2015-06-08 08:41:54 +02:00
Hans de Goede
2fcf033d36 sunxi: axp: Move axp gpio code to a separate axpi-gpio driver
Move the axp-gpio code out of the drivers/power/axp*.c code, and into
a new separate axpi-gpio driver.

This change drops supports for the gpio3 pin on the axp209, as that requires
special handling, and no boards are using it.

Besides cleaning things up by moving the code to a separate driver, as
a bonus this change also adds support for the (non vusb) gpio pins on the
axp221 and the gpio pins on the axp152.

The new axp-gpio driver gets its own Kconfig option, and is only enabled
on boards which need it. Besides that it only gets enabled in the regular
u-boot build and not for the SPL as we never need it in the SPL.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04 16:51:53 +02:00
Andrea Scian
d37c6288a6 gpio: add Xilinx Zynq PS GPIO driver
Most of the code is taken (and adapted) from Linux kernel driver.

Just add CONFIG_ZYNQ_GPIO to you config to enable it

Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29 10:41:24 +02:00
rev13@wp.pl
eaaa4f7e0e ARMv7M: Add STM32F4 support
Signed-off-by: Kamil Lulko <rev13@wp.pl>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-22 12:14:55 -04:00
Albert ARIBAUD \(3ADEV\)
606f704760 lpc32xx: add GPIO support
This driver only supports Driver Model, not legacy model.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-04-10 14:23:09 +02:00
Simon Glass
bdfb34167f dm: tegra: Enable driver model in SPL and adjust the GPIO driver
Use the full driver model GPIO and serial drivers in SPL now that these are
supported. Since device tree is not available they will use platform data.

Remove the special SPL GPIO function as it is no longer needed.

This is all in one commit to maintain bisectability.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-04 14:55:04 -05:00
Albert ARIBAUD
740f41d3cb Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master' 2014-07-28 10:12:45 +02:00
Simon Glass
5b9765c7d6 dm: gpio: Don't use the driver model uclass for SPL
Driver model does not support SPL yet, so we should not use the GPIO
uclass for SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:23 +01:00
Ian Campbell
abce2c6220 sunxi: add gpio driver
This patch enables CONFIG_CMD_GPIO for the Allwinner (sunxi) platform as well
as providing the common gpio API (gpio_request/free, direction in/out, get/set
etc).

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ma Haijun <mahaijuns@gmail.com>
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Henrik Nordström <henrik@henriknordstrom.net>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-07-18 19:42:25 +01:00
Simon Glass
96495d90fe dm: Add GPIO support and tests
Add driver model support for GPIOs. Since existing GPIO drivers do not use
driver model, this feature must be enabled by CONFIG_DM_GPIO. After all
GPO drivers are converted over we can perhaps remove this config.

Tests are provided for the sandbox implementation, and are a sufficient
sanity check for basic operation.

The GPIO uclass understands the concept of named banks of GPIOs, with each
GPIO device providing a single bank. Within each bank the GPIOs are numbered
using an offset from 0 to n-1. For example a bank named 'b' with 20
offsets will provide GPIOs named b0 to b19.

Anonymous GPIO banks are also supported, and are just numbered without any
prefix.

Each time a GPIO driver is added to the uclass, the GPIOs are renumbered
accordinging, so there is always a global GPIO numbering order.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2014-03-04 12:15:30 -05:00
Darwin Rambo
24e5219754 gpio: kona: Add Kona gpio driver
Add support for the Kona GPIO controller found on Broadcom mobile SoCs.

Signed-off-by: Darwin Rambo <drambo@broadcom.com>
Reviewed-by: Steve Rae <srae@broadcom.com>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Tim Kryger <tkryger@linaro.org>
2014-02-22 19:30:27 +01:00
Viktar Palstsiuk
7d9ec6a0af Add support for SX151x SPI GPIO Expanders
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
2013-11-08 09:39:13 -05:00
Masahiro Yamada
710f1d3d5f drivers: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31 13:26:01 -04:00
Dan Murphy
61c1775f16 gpio: tca642x: Add the tca642x gpio expander driver
Add the tca642x gpio expander driver

Datasheet:
http://www.ti.com/product/tca6424a

Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-07-30 09:21:42 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Sonic Zhang
da34aae5fb bfin: Move gpio support for bf54x and bf60x into the generic driver folder.
The gpio spec for bf54x and bf60x differ a lot from the old gpio driver for bf5xx.
A lot of machine macros are used to accomodate both code in one gpio driver.
This patch split the old gpio driver and move new gpio2 support to the generic
gpio driver folder.

- To enable gpio2 driver, macro CONFIG_ADI_GPIO2 should be defined in the board's
config header file.
- The gpio2 driver supports bf54x, bf60x and future ADI processors, while the
older gpio driver supports bf50x, bf51x, bf52x, bf53x and bf561.
- All blackfin specific gpio function names are replaced by the generic gpio APIs.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13 16:30:27 +08:00
Michal Simek
4e779ad2e5 gpio: Add support for microblaze xilinx GPIO
Microblaze uses gpio which is connected to the system reset.
Currently gpio subsystem wasn't used for it.

Add gpio driver and change Microblaze reset logic to be done
via gpio subsystem.

There are various configurations which Microblaze can have
that's why gpio_alloc/gpio_alloc_dual(for dual channel)
function has been introduced and gpio can be allocated
dynamically.

Adding several gpios IP is also possible and supported.

For listing gpio configuration please use "gpio status" command

This patch also remove one compilation warning:
microblaze-generic.c: In function 'do_reset':
microblaze-generic.c:38:47: warning: operation on '*1073741824u'
 may be undefined [-Wsequence-point]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09 11:20:08 +02:00
Holger Hans Peter Freyther
03414ac45e gpio: Build the da8xx_gpio code for the davinci644x device
The differences include the number of GPIOs and that one is
not required to set the pinmux on request.

Signed-off-by: Holger Hans Peter Freyther <holger@freyther.de>
2013-02-20 08:52:41 -05:00
Bill Richardson
55ae10f8db x86: gpio: Add GPIO driver for Intel ICH6 and later.
Implement <asm-generic/gpio.h> functions for Intel ICH6 and later.
Only GPIOs 0-31 are handled by this code.

Signed-off-by: Bill Richardson <wfrichar@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:38 -08:00
Gabriel Huau
5d889ae79e ARM : Add GPIO Driver and IOMUX definition for S3C2440
It's now possible to use the gpio driver interface
for s3c2440. This patch add iomux definitions too.

Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
2012-10-03 10:50:20 +02:00
Stephen Warren
efad6cf881 ARM: add basic support for the Broadcom BCM2835 SoC
This SoC is used in the Raspberry Pi, for example.

For more details, see:
http://www.broadcom.com/products/BCM2835
http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf.

Initial support is enough to boot to a serial console, execute a minimal
set of U-Boot commands, download data over a serial port, and boot a
Linux kernel. No storage or network drivers are implemented.

GPIO driver originally by Vikram Narayanan <vikram186@gmail.com>
with many fixes from myself.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2012-09-01 14:58:21 +02:00
Mathieu J. Poirier
84dee301c3 snowball: Add support for ux500 based snowball board
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Conflicts:

	drivers/gpio/Makefile
2012-09-01 14:58:19 +02:00
Marek Vasut
308252adaf dm: Move OMAP GPIO driver to drivers/gpio/
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-09-01 14:58:13 +02:00
Nobuhiro Iwamatsu
d764c5043d sh: Add support pin function control using GPIO
Renesas SH and R-Mobile set up device using PFC.
This provide the framework. Most codes were brought from linux kernel.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-08-08 10:24:41 +09:00
Stefan Roese
2cb06a4fda GPIO: Add SPEAr GPIO driver
Tested on x600 (SPEAr600).

Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:42 +02:00
Tom Warren
52a8b82074 gpio: tegra2: rename tegra2_gpio.* to tegra_gpio.*
In anticipation of Tegra3 support, continue removing/renaming
Tegra2-specific files. No functional changes (yet).
Updated copyrights to 2012.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-07-07 14:07:20 +02:00
Simon Glass
8d30fcd9a1 sandbox: gpio: add basic driver for simulating GPIOs
This provides a way of simulating GPIOs by setting values which are seen
by the normal gpio_get/set_value() calls.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-12 11:03:42 -04:00
Joe Hershberger
4b56579388 mpc83xx: Add a GPIO driver for the MPC83XX family
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-01-09 20:10:33 -06:00
Wolfgang Denk
c829ff2e3d Merge branch 'master' of git://git.denx.de/u-boot-nios
* 'master' of git://git.denx.de/u-boot-nios:
  nios2: Offer ft_board_setup() capability and call fdt_fixup_ethernet().
  board/nios2-generic: Use altera_pio driver and remove board specific driver
  gpio: Add driver for Altera's PIO core
  nios2: Pseudo implement dcache_status/enable/disable()
2011-11-21 22:00:37 +01:00
Marek Vasut
6b6440def8 iMX28: Add GPIO control
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-11-11 11:36:57 +01:00
Joachim Foerster
03d67e1276 gpio: Add driver for Altera's PIO core
This driver may handle multiple PIO cores and thus needs to be
setup by calling the altera_pio_init() function within the early
board setup routine.

The driver comes with some extras, see below the copyleft header.

Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2011-10-28 09:50:49 +08:00
Dirk Eibach
486cad03be gpio: Add PCA9698 40-bit I2C I/O port
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
2011-10-22 00:43:45 +02:00
Ajay Bhargav
0c44229859 gpio: Add GPIO driver framework for Marvell SoCs
This patch adds generic GPIO driver framework support for Marvell SoCs.

To enable GPIO driver define CONFIG_MARVELL_GPIO and for GPIO commands
define CONFIG_CMD_GPIO in your board configuration file.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
2011-09-30 22:00:52 +02:00
Laurence Withers
f517afd5df DA8xx: add generic GPIO driver
Add a generic GPIO driver for the DaVinci DA8xx processors. It is turned
on by defining CONFIG_DA8XX_GPIO and fulfills the generic GPIO interface
specified in <asm/gpio.h> . The driver has support for both manipulating
GPIO pins as well as automatically configuring the pin multiplexor
registers to set the pin function to GPIO.

Signed-off-by: Laurence Withers <lwithers@guralp.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-08-03 12:49:19 +02:00
Tom Warren
4e5ae09e56 GPIO: Tegra2: add GPIO driver for Tegra2
Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-07-04 10:55:26 +02:00
Prafulla Wadaskar
e5f495d172 gpio: Add Multi-Function-Pin configuration driver for Marvell SoCs
Most of the Marvell SoCs has Multi Function Pin (MFP) configuration registers
For ex. ARMADA100.

These registers are programmed to expose the specific functionality
associated with respective SoC Pins

This driver provides configuration APIs,
using them, configuration need to be done in board specific code

for ex- following code configures MFPs 107 and 108 for UART_TX/RX functionality

int board_early_init_f(void)
{
        u32 mfp_cfg[] = {
                /* Console on UART1 */
                MFP107_UART1_RXD,
                MFP108_UART1_TXD,
                MFP_EOC         /*End of configureation*/
        };
        /* configure MFP's */
        mfp_config(mfp_cfg);
        return 0;
}

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-12-16 23:02:43 +01:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Stefano Babic
c4ea142424 Use common function to set GPIOs for MX3 and MX5
The patch adds support for setting gpios to the
MX51 processor and change name to the corresponding
functions for MX31. In this way, it is possible to get rid
of nasty #ifdef switches related to the processor type.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-09-29 11:24:30 +02:00
Minkyu Kang
889a275d42 ARMV7: S5P: rename from CONFIG_S5PC1XX to CONFIG_S5P
Use the same configuration around S5P SoCs.
(s5pc100, s5pc110, s5pc210 and so on)

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-08-26 17:33:23 +09:00
Minkyu Kang
3bb6b037e8 SAMSUNG: make s5p common gpio functions
Because of s5pc1xx gpio is same as s5p seires SoC,
move gpio functions to drvier/gpio/
and modify structure's name from s5pc1xx_ to s5p_.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-04-30 05:23:23 -05:00
Jens Scharsig
ea8fbba731 add a new AT91 GPIO driver
* add a real AT91 GPIO driver instead of header inline code
* resolve the mixing of port and pins
* change board config files to use new driver
* add macros to gpio to realize backward compatibility

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-02-12 12:31:54 -06:00
Dieter Kiermaier
ec16441085 Kirkwood: add Marvell Kirkwood gpio driver
Signed-off-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Tested-by: Heiko Schocher <hs@denx.de>
2009-07-23 00:19:28 +02:00
Guennadi Liakhovetski
b30de3cccf i.MX31: add a simple gpio driver
This is a minimal driver, so far only managing output. It will
be used by the mxc_spi.c driver.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-24 09:43:10 +01:00
Peter Tyser
e92739d34e Add support for PCA953x I2C gpio devices
Initial support for NXP's 4 and 8 bit I2C gpio expanders
(eg pca9537, pca9557, etc). The CONFIG_PCA953X define
enables support for the devices while the CONFIG_CMD_PCA953X
define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
define enables an 'info' sub-command which provides summary
information for the given pca953x device.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-19 18:11:49 -06:00