Commit graph

10 commits

Author SHA1 Message Date
Nishanth Menon
a94a4071d4 tree-wide: Replace http:// link with https:// link for ti.com
Replace instances of http://www.ti.com with https://www.ti.com

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-11-10 11:01:50 -05:00
Siddharth Vadapalli
cb6f4bbe3f phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E
Enable full rate divider configuration support for J721E_WIZ_16G for SGMII.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2023-08-15 17:46:39 -04:00
Siddharth Vadapalli
0914616156 phy: ti: phy-j721e-wiz: Add SGMII support in wiz driver for J7200
Select the same mac divider for SGMII too as the one being used for
QSGMII.

Enable full rate divider configuration support for J721E_WIZ_10G for
SGMII.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2023-08-15 17:46:39 -04:00
Ravi Gunasekaran
eab13ca620 phy: ti: phy-j721e-wiz: Add j721s2-wiz-10g module support
Add support for j721s2-wiz-10g device to use clock-names interface
instead of explicitly defining clock nodes within device tree node.

Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
2023-06-01 12:40:16 -04:00
Sinthu Raja
3d0f2e37c5 phy: ti: j721e-wiz: Add support to enable LN23 Type-C swap
The WIZ acts as a wrapper for SerDes and has Lanes 0 and 2 reserved
for USB for type-C lane swap if Lane 1 and Lane 3 are linked to the
USB PHY that is integrated into the SerDes IP. The WIZ control register
has to be configured to support this lane swap feature.

The support for swapping lanes 2 and 3 is missing and therefore
add support to configure the control register to swap between
lanes 2 and 3 if PHY type is USB.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-03-29 13:30:29 -04:00
Sinthu Raja
75b6cd97dd phy: ti: j721e-wiz: Manage TypeC lane swap if typec-dir-gpios not specified
It's possible that the Type-C plug orientation on the DIR line will be
implemented through hardware design. In that situation, there won't be
an external GPIO line available, but the driver still needs to address
this since the DT won't use the typec-dir-gpios property.

Add code to handle LN10 Type-C swap if typec-dir-gpios property is not
specified in DT.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-03-29 13:30:29 -04:00
Matt Ranostay
28ba10074b phy: ti: j721e-wiz: add j784s4-wiz-10g module support
Add support for j784s4-wiz-10g device which has two core reference
clocks (e.g core_ref_clk, core_ref1_clk) which requires an additional
mux selection option.

Signed-off-by: Matt Ranostay <mranostay@ti.com>
2022-10-18 09:48:22 -04:00
Matt Ranostay
ea3e163f21 phy: ti: j721e-wiz: use OF data for device specific data
Move device specific data into OF data structure so it
is easier to maintain and we can get rid of if statements.

Based on: https://lore.kernel.org/linux-phy/20220526064121.27625-1-rogerq@kernel.org/T/#u

Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
2022-07-25 09:38:47 -04:00
Aswath Govindraju
ff0becea71 phy: ti: phy-j721e-wiz.c: Fix the condition for setting P_ENABLE_FORCE
Fix the condition for setting P_ENABLE_FORCE bit, by syncing with the
driver in kernel.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-02-08 11:00:03 -05:00
Jean-Jacques Hiblot
1a83f9931e phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
Add support for WIZ module present in TI's J721E SoC. WIZ is a SERDES
wrapper used to configure some of the input signals to the SERDES. It is
used with both Sierra(16G) and Torrent(10G) SERDES. This driver configures
three clock selects (pll0, pll1, dig) and supports resets for each of the
lanes.

This is an adaptation of the linux driver.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-10-kishon@ti.com
2021-07-27 10:57:12 +05:30