Commit graph

33 commits

Author SHA1 Message Date
Masahiro Yamada
da384a9d76 net: rename and refactor eth_rand_ethaddr() function
Some functions in include/net.h are ported from
include/linux/etherdevice.h of Linux Kernel.

For ex.
  is_zero_ether_addr()
  is_multicast_ether_addr()
  is_broadcast_ether_addr()
  is_valid_ether_addr();

So, we should use the same function name as that of Linux Kernel,
eth_rand_addr(), for consistency.

Besides, eth_rand_addr() has been implemented as an inline function.
So it should not be surrounded by #ifdef CONFIG_RANDOM_MACADDR.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2014-05-12 15:19:46 -04:00
Andrew Ruder
c583ee16cb net: dm9000: random mac address support
When an unprogrammed EEPROM is attached to a dm9000, the dm9000 will
come up with a invalid MAC address of ff:ff:ff:ff:ff:ff.  Add code that
gets enabled if CONFIG_RANDOM_MACADDR is enabled that generates a random
(and valid) locally administered MAC address that allows the system to
network boot until a real MAC address can be configured.

Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
2013-11-22 17:03:19 -06:00
Wolfgang Denk
93e1459641 Coding Style cleanup: replace leading SPACEs by TABs
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>
2013-10-14 16:06:54 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Joe Hershberger
7f9a8a673b drivers/net/dm9000x.c: Fix compile warning
Fix this:
dm9000x.c: In function 'dm9000_initialize':
dm9000x.c:636:12: warning: assignment from incompatible pointer type

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
2012-05-22 10:18:15 -05:00
Jason Jin
5c1d082b14 DM9000:Add a byte swap macro for dm9000 io operation.
commit a45dde2293 changed the dm9000
direct register access to standard IO. This should work
on the ColdFire platform as there are corresponding macros for
the LE devices. But the hardware settings on some ColdFire boards had
swapped the byte order which make the original macros such as out_le16
cannot work. To avoid changing the common io access code on ColdFire
platform, the DM9000_BYTE_SWAPPED define was added to make the dm9000 use
__raw* IO access on some ColdFire boards.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2011-10-17 22:25:33 +02:00
Andy Fleming
09c04c2096 Remove instances of phy_read/write
There were a few files which were already using phy_read and phy_write
for their PHY function names.  It's only a few places, and the name
seems most appropriate for the high-level abstraction, so let's
rename the other versions to something more specific.

Also, uec_phy.c had a marvell_init function which I renamed to not
conflict with the one in marvell.c

Lastly, uec_phy.c was putting a space between the phy writing
function names, and the open paren, so I fixed that

Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2011-04-20 13:44:46 -05:00
Mike Frysinger
67bee2fb64 net: dm9000x: re-add casts to I/O pointers to fix gcc warnings
The DM9000 in/out helper functions were casting the register address when
it was accessing things directly (pre commit a45dde2293).  But
when it was changed to using the in/out helpers, those casts were dropped
because those functions don't take pointers.  Even more recently, those
functions were then changed to use the read/write helpers, but the casts
were not re-added.  This is necessary because the read/write helpers do
take pointers.  Otherwise we get a lot of warnings like:
dm9000x.c: In function 'dm9000_inblk_8bit':
dm9000x.c:172: warning: passing argument 1 of 'readb'
	makes pointer from integer without a cast

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-07-12 00:02:11 -07:00
Wolfgang Denk
d74dda09f0 dm9000x.c: fix compile problems
Use readX() / writeX() accessors instead of inX() / outX().

Suggested-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-26 22:19:35 +02:00
Mike Frysinger
a45dde2293 net: dm9000x: use standard I/O accessors
The current dm9000x driver accesses its memory mapped registers directly
instead of using the standard I/O accessors.  This can cause problems on
Blackfin systems as the accesses can get out of order.  So convert the
direct volatile dereferences to use the normal in/out macros.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03 14:52:48 -07:00
Thomas Weber
076cd24cb4 net: dm9000x: fix debug output
commit 60f61e6d76 breaks compile with gcc by introducing __func__
instead of constant string "func" in the macro call but missed to change the macro.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-12-13 21:57:01 -08:00
Ben Warren
0775437293 Fix DM9000 MAC address handling
Proper behavior is to pull MAC address from NVRAM in the initialization() an
stuff it in dev->address, then program the device from dev->address in
the init() function.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-10-29 10:06:34 -07:00
Remy Bohmer
60f61e6d76 Convert DM9000 driver for CONFIG_NET_MULTI
All drivers need to be converted to CONFIG_NET_MULTI.
This patch converts the dm9000 driver.

Signed-off-by: Thomas Smits <ts.smits@gmail.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:55 -07:00
Remy Bohmer
e5a3bc2401 Add config option for disabling DM9000-SROM support.
Some boards do not have SROM support for the DM9000 network adapter.
Instead of listing these board names in the driver code, make this
option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the
same routines

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-08 22:57:21 -07:00
David Brownell
ad74cae9ff dm9000 EEPROM reading bugfix
Make the U-Boot dm9000 driver read addresses from EEPROM just
like Linux does ... read six bytes, instead of reading twelve
bytes and then discarding every other one.

Using the right Ethernet address is a big win.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
2009-04-28 00:28:18 +02:00
Mike Frysinger
d3f871482f drivers/net/: get mac address from environment
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The drivers that get converted here:
	3c589
	4xx_enet
	dc2114x
	dm9000x
	enc28j60
	fsl_mcdmafec
	ks8695eth
	mcffec
	rtl8019
	rtl8169
	s3c4510b_eth
	xilinx_emac
	xilinx_emaclite

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Rolf Offermanns <rof@sysgo.de>
CC: Stefan Roese <sr@denx.de>
CC: Sascha Hauer <saschahauer@web.de>
CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
CC: Greg Ungerer <greg.ungerer@opengear.com>
CC: Xue Ligong <lgxue@hotmail.com>
CC: Masami Komiya <mkomiya@sonare.it>
CC: Curt Brune <curt@cucy.com>
CC: Michal SIMEK <monstr@monstr.eu>
2009-03-20 22:39:10 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Andrew Dyer
d26b739afe dm9000 remove dead external phy support, gpio fix
dm9000 has code to detect and initialize external phy parts, but later
on in the code the part is forced to use the internal phy
unconditionally.  Remove the unused/untested code.

change the GPIO initialization so that only the GPIO used as an
internal phy reset (hardwired in the chip) is set as an output.  The
remaining GPIO need to be handled by board specific code to prevent
possible drive conflicts.  Set as inputs for safety.

replace a few magic numbers with defines

Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-08-26 23:08:19 -07:00
TsiChung Liew
943b825bf1 Fix dm9000 receive status and len little endian issue
The received status and len was in little endian
format and caused the ethernet unable to proceed
further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-08-18 23:10:43 -07:00
Shinya Kuribayashi
3b904ccb93 net: Conditional COBJS inclusion of network drivers
Replace COBJS-y with appropriate driver config names.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-09 23:21:05 -07:00
Ben Warren
e44f3ea4e8 Merge branch 'master' of git://git.denx.de/u-boot 2008-06-08 22:04:22 -07:00
Remy Bohmer
0e38c938ed DM9000 fix status check fail 0x6d error for trizeps board
According to the Application Notes of the DM9000, only the 2 bits 0:1 of
the status byte need to be checked to identify a valid packet in the fifo

But, The several different Application Notes do not all speak the same
language on these bits. They do not disagree, but only 1 Application Note
noted explicitly that only these 2 bits need to be checked.
Even the datasheets do not mention anything about these 2 bits.

Because the old code, and the kernel check the whole byte, I left this piece
untouched.

However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
it should work.

Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
in the fifo) is much shorter now, compared to the older U-boot driver code,
so that we can maybe run into a hardware condition now that was never seen
before, or maybe was seen very unfrequently.

Additionaly added a cleanup of a stack variable.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-05 23:47:28 -07:00
Remy Bohmer
d6ee5fa40c Fix order for reading rx-status registers in 32bit mode of DM9000
A last minute cleanup before submitting the DM9000A patch series yesterday introduced
a bug in reading the rx-status registers in 32bit mode only.
This patch repairs this.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-04 23:49:28 -07:00
Remy Bohmer
98291e2e68 DM9000: Some minor code cleanups
Some lines of the U-boot DM9000x driver are longer than 80 characters, or
need some other minor cleanup.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-04 23:47:32 -07:00
Remy Bohmer
850ba7555d DM9000: Make driver work properly for DM9000A
The DM9000A network controller does not work with the U-boot DM9000x driver.
Analysis showed that many incoming packets are lost.

The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
check for a valid rx packet be done on the interrupt status register, not
directly by performing the dummy read and the rx status check as is currently
the case in the u-boot driver.

When the recommended poll is done as suggested the driver starts working
correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
can be more than 1 package in the fifo at the same time.

The driver must perform the rx-status check in a loop and read and handle all
packages until there is no more left _after_ the interrupt RX flag is set.

This change has been tested with DM9000A, DM9000E, DM9000EP.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-04 23:47:31 -07:00
Remy Bohmer
fbcb7ece0e DM9000: Improve eth_reset() routine
According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
reset procedure must be done twice to properly reset the DM9000 by means of software.
This errata is not needed anymore for the DM9000A, but it does not bother it.

This change has been tested with DM9000A, DM9000E, DM9000EP.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-04 23:47:31 -07:00
Remy Bohmer
acba31847f DM9000: improve eth_send() routine
The eth_send routine of the U-boot DM9000x driver does not match the
DM9000 or DM9000A application notes/programming guides.

This change improves the stability of the DM9000A network controller.

This change has been tested with DM9000A, DM9000E, DM9000EP.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-04 23:47:31 -07:00
Remy Bohmer
134e266253 DM9000: repair debug logging
It seems that the debugging code of the DM9000x driver in U-boot has not been
compiled for a long time, because it cannot compile...

Also rearranged some loglines to get more useful info while debugging.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-04 23:47:31 -07:00
Remy Bohmer
a101361bfe DM9000: Add data bus-width auto detection.
The U-boot DM9000x driver contains a compile time bus-width definition for
the databus connected to the network controller.

This compile check makes the code unclear, inflexible and is unneccessary.
It can be asked to the network controller what its bus-width is by reading bits
6 and 7 of the interrupt status register.

The linux kernel already uses a runtime mechanism to determine this bus-width,
so the implementation below looks somewhat like that implementation.

This change has been tested with DM9000A, DM9000E, DM9000EP.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-04 23:47:31 -07:00
Jean-Christophe PLAGNIOL-VILLARD
42fd5f87b1 Merging Stelian Pop AT91 patches
Merge branch 'testing-V2'

Conflicts:

	board/atmel/at91cap9adk/Makefile
                Fixing copyright
	board/atmel/at91sam9260ek/Makefile
                Fixing copyright
	board/atmel/at91sam9260ek/u-boot.lds
                Delete no more needed ld script

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-24 12:56:53 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Stelian Pop
d99a8ff66d AT91SAM9261EK support
This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:32:08 +02:00
Jean-Christophe PLAGNIOL-VILLARD
2439e4bfa1 drivers/net : move net drivers to drivers/net
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 18:35:17 +01:00
Renamed from drivers/dm9000x.c (Browse further)