Commit graph

151 commits

Author SHA1 Message Date
Tom Rini
0d121ad6de Convert CONFIG_SYS_DISCOVER_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_DISCOVER_PHY

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
7675a526e0 Convert CONFIG_SYS_UNIFY_CACHE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_UNIFY_CACHE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 09:29:08 -04:00
Tom Rini
89d888ed6d Convert CONFIG_DW_ALTDESCRIPTOR to Kconfig
This converts the following to Kconfig:
   CONFIG_DW_ALTDESCRIPTOR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
5c511ea936 Convert CONFIG_E1000_NO_NVM to Kconfig
This converts the following to Kconfig:
   CONFIG_E1000_NO_NVM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:30 -04:00
Sean Anderson
d64ac8549d net: e1000: Depend on CONFIG_PCI
This driver depends on PCI. Update the Kconfig accordingly.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-05-26 10:32:27 -04:00
Marek Behún
da84e409df net: mvneta: Use DM MDIO API for connecting PHY
Use the modern DM MDIO API for connecting PHY in the mvneta driver.

This requires enabling MVMDIO driver in several config files.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04 07:05:51 +02:00
Stefan Roese
8e0f8efe2a net: Add ethernet support for MIPS Octeon
This patchs adds the ethernet & MDIO driver for the MIPS Octeon II / III
SoC platform. Please note that these drivers are based on the 2013
U-Boot version from Marvell and make use of the platform supported
helper functions for the ethernet functionality, including stuff like
SFP handling.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2022-05-04 03:38:21 +02:00
Marek Vasut
f478da938f net: dm9000: Add Kconfig entry
Add Kconfig entry for the DM9000 MAC.

Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13 15:13:54 +03:00
Tom Rini
6329dda175 Convert CONFIG_LPC32XX_ETH to Kconfig
This converts the following to Kconfig:
   CONFIG_LPC32XX_ETH

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
03d14ccdf6 Convert CONFIG_RMII to Kconfig
This converts the following to Kconfig:
   CONFIG_RMII

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Bharat Gooty
5a5bba053d net: brcm: netXtreme driver
Broadcom bnxt L2 driver support. Used by the Broadcom
iproc platforms.

Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
2021-12-02 08:34:01 +02:00
Dylan Hung
8b41dedd40 drivers: net: add Aspeed MDIO driver
Add a driver for the MDIO interface for Aspeed AST2600 SOC.  The driver
only supports clause 22 for now.

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2021-11-23 09:57:56 +02:00
Vladimir Oltean
f24b666b22 net: dsa: add driver for NXP SJA1105 L2 switch
The SJA1105 driver is largely reused from Linux. Its programming model
is that it is blank out of reset, and it waits for a static
configuration stream over SPI, which contains all runtime parameters (it
has no notion of "default values").

Keeping a binary array for the configuration stream would have meant
that aspects such as the CPU port and the MAC speeds could have not been
configured easily, and would have been static and board-dependent.
Live-patching the binary array means recalculating the static config
table CRCs, which is not a fun process.

So we create an abstraction over the static config tables, using the
packing API, same as in Linux. The tables are kept as C structures, and
the binary configuration stream is constructed on-the-go, with CRC and
all.

All static config tables instantiated in this driver are mandatory.
The hardware reference manual can be found at:
https://www.nxp.com/docs/en/user-guide/UM10944.pdf

For tagging, a simplified version of tag_8021q from Linux is used. The
VLAN EtherType is the same (0xdadb) but since we don't want switching in
U-Boot, there is no reason to have a TX VLAN and an RX VLAN for each
port. We just need the RX VLANs to act as the unique pvid of each
front-panel port, to decode the switch port number. The RX VLAN is used
for both RX and TX.

The device tree bindings are the same as in Linux.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-23 09:57:56 +02:00
Tom Rini
b8475e6aca Convert CONFIG_MACB to Kconfig
This converts the following to Kconfig:
   CONFIG_MACB

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Rajesh Bhagat
a97a071d10 configs: fsl: migrate FMAN/QE specific defines to Kconfig
Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR,
CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and
move these entries to defconfigs.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 17:18:23 +05:30
Tom Rini
6674edaabf Prepare v2021.10-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmFBKRgACgkQFHw5/5Y0
 tyw/PwwAtGB3rBeYW4rjWuMC5WP1UDTnvZIAok5ImWumWDahjDm8Yq2VCzAe9adw
 EYBjuNmaNl9aQvGVqlVJeIcLku5MLuLQu2za8vhc1R8X9VTPPY+LLTcdOokOmB8y
 8JiaE7fJsb1bZeV+diF9tss3B0IkUrwSJtW1d+qfdz/4UiRvwK5BhnZgzIobDldO
 g1Ldz/xiR2GOAXlUMwDrNAi6qNvmeAqRsQxySVrjltAV2ST7LJnOiHuWvJX6g6VS
 l796Hleh/kULfEW6n+1ZaTNqvVRcJ8xYSOG8w8y9u6HuPBA3JrYH1p1Eo5n7PPDv
 US71Iy/ncweTyfTMEBThWLqjHOQ05sVkWX/r4fj2iJRli+Og53lE1fVJ4ajIx7vz
 Tc76wI43i0I5lr2yTErjUG6EzDDoueqd+c8BwxihNLUK/+QG31xoCEMfC80C25ro
 QhYVFgiPWN0ySUD5M5tbGXODvfNNIDKXpY5oSOTVtemZtDEMpO2zBM1s/K3RV7Ud
 Je9Pj0Cu
 =Me42
 -----END PGP SIGNATURE-----

Merge tag 'v2021.10-rc4' into next

Prepare v2021.10-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>

# gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	board/Arcturus/ucp1020/spl.c
#	cmd/mvebu/Kconfig
#	common/Kconfig.boot
#	common/image-fit.c
#	configs/UCP1020_defconfig
#	configs/sifive_unmatched_defconfig
#	drivers/pci/Kconfig
#	include/configs/UCP1020.h
#	include/configs/sifive-unmatched.h
#	lib/Makefile
#	scripts/config_whitelist.txt
2021-09-16 10:29:40 -04:00
Simon Glass
3232bdf0b3 pci: Drop DM_PCI
This option has not effect now. Drop it, using PCI instead where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-13 18:23:13 -04:00
Simon Glass
9f6649209f net: Move network rules to drivers/net
The code under drivers/net is related to ethernet networking drivers, in
some fashion or another.  Drop these from the top-level Makefile and
also move the phy rule into drivers/net/Makefile which is where it
belongs.  Make the new rule for drivers/net check for the build-stage
relevant ETH symbol.

Fix up some Kconfig dependencies while we're here to mirror how the
Makefile logic now works.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Introduce ETH, Kconfig dependency changes, am43xx fix]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04 12:51:47 -04:00
Michal Simek
b4c2c151b1 Kconfig: Remove all default n/no options
default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:47:49 -04:00
Peng Fan
06918de45d net: fec_mxc: support i.MX8ULP
Support i.MX8ULP in fec_mxc

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-08-09 14:46:50 +02:00
Ashok Reddy Soma
258ce79cfc net: xilinx: axi_mrmac: Add MRMAC driver
Add support for xilinx multirate(MRMAC) ethernet driver.
This driver uses multichannel DMA(MCDMA) for data transfers of MRMAC.
Added support for 4 ports of MRMAC for speeds 10G and 25G.
MCDMA supports upto 16 channels but in this driver we have setup only
one channel which is enough.

Tested 10G and 25G on all 4 ports.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-26 09:18:45 +02:00
Patrick Delaunay
9dbdc234a7 net: dwc_eth_qos: use generic ethernet phy for stm32 variant
Use the generic ethernet phy which already manages the correct binding
for gpio reset, including the assert an deassert delays.

Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-22 22:05:44 +03:00
Tim Harvey
668e205098 net: add support for KSZ9477/KSZ9897/KSZ9567 GbE switch
The Microchip KSZ9477/KSZ9897/KSZ9567 7-Port Gigabit Ethernet Switches
support SGMII/RGMII/MII/RMII with register access via SPI, I2C, or MDIO.

This driver currently supports I2C register access but SPI or MDIO register
access can be easily added at a later time.

Tagging is not implemented and instead the active port is tracked to
avoid needing a tag to store port information.

This was tested with the imx8mm-venice-gw7901 board which has a
KSZ9897S switch with an IMX8MM FEC MAC master connected via RGMII_ID.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-07-10 18:12:42 +02:00
Tom Rini
ec6b37cef4 ppc: Remove T4160RDB board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.  As this is the last
ARCH_T4160 platform, remove that support as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:24 -04:00
Tom Rini
6c3d99335c ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOT
These boards have not been converted to CONFIG_DM_PCI by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.  As this is
the only ARCH_T1023 platform left, remove that support as well.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:23 -04:00
Andre Przywara
f26c9d7fed net: smc911x: Drop redundant CONFIG_SMC911X_16_BIT Kconfig symbol
The SMC911x Ethernet driver needs to know which accessor functions it
can use to access the MMIO registers. For that reason we have a Kconfig
choice between 16 and 32-bit bus width.

Since it's only those two options that we (and the Linux kernel)
support, and there does not seem to be any evidence of another bus
width anywhere, limit the Kconfig construct to a simple symbol.

This simplifies the code and allows a later rework to be much easier.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-07-06 05:22:41 +03:00
Jassi Brar
eab447b2b5 net: synquacer: Add netsec driver
Add SynQuacer's NETSEC GbE controller driver.
Since this driver will load the firmware from SPI NOR flash,
this depends on CONFIG_SYNQUACER_SPI=y.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-18 11:29:17 +03:00
Andre Przywara
debb07bf10 net: calxedagmac: Convert to DM_ETH
To squash that nasty warning message and make better use of the newly
gained OF_CONTROL feature, let's convert the calxedagmac driver to the
"new" driver model.
The conversion is pretty straight forward, mostly just adjusting the
use of the involved data structures.
The only actual change is the required split of the receive routine into
a receive and free_pkt part.
Also this allows us to get rid of the hardcoded platform information and
explicit init calls.

This also uses the opportunity to wrap the code decoding the MMIO
register base address, to make it safe for using PHYS_64BIT later.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-20 07:31:12 -04:00
Claudiu Manoil
ff98da0667 sandbox: Add a DSA sandbox driver and unit test
The DSA sandbox driver is used for unit testing the DSA class code.
It implements a simple 2 port switch plus 1 CPU port, and uses a
very simple tag to identify the ports.

The DSA sandbox device is connected via CPU port to a regular Ethernet
sandbox device, called 'dsa-test-eth, managed by the existing eth
sandbox driver.  The 'dsa-test-eth' is not intended for testing the
eth class code however, but it is used to emulate traffic through the
'lan0' and 'lan1' front pannel switch ports.  To achieve this the dsa
sandbox driver registers a tx handler for the 'dsa-test-eth' device.
The switch ports, labeled as 'lan0' and 'lan1', are also registered
as eth devices by the dsa class code this time.  So pinging through
these switch ports is as easy as:

=> setenv ethact lan0
=> ping 1.2.3.5

Unit tests for the dsa class code were also added.  The 'dsa_probe'
test exercises most API functions from dsa.h.  The 'dsa' unit test
simply exercises ARP/ICMP traffic through the two switch ports,
including tag injection and extraction, with the help of the dsa
sandbox driver.

I took care to minimize the impact on the existing eth unit tests,
though some adjustments needed to be made with the addition of
extra eth interfaces used by the dsa unit tests. The additional eth
interfaces also require MAC addresses, these have been added to the
sandbox default environment.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-Id: <20210216224804.3355044-5-olteanv@gmail.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30
Tom Rini
a99dab1d33 ppc: Remove Cyrus_P5020 and P5040 boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.  As the P5020 is the last ARCH_P5020 platform, remove that
support as well.

Cc: Andy Fleming <afleming@gmail.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-10 08:05:07 -04:00
Tom Rini
2322b9568f ppc: Remove T2081QDS board and ARCH_T2081 support
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  It is also the only ARCH_T2081 board so remove that support
as well.

Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Neil Armstrong
798424e857 net: designware: add Amlogic Meson8b & later glue driver
This adds a proper glue driver for the Designware DWMAC ethernet MAC IP
found in the Amlogic Meson8, GXBB, GXL, GXM, G12A, G12B & SM1 SoCs.

This is aimed to replace the static ethernet link setup found on the board
init code for the Amlogic SoC based boards.

Tested on a libretech-cc (S905x Internal RMII 10/100 PHY) and Khadas VIM3 (A113d
with external 10/100/1000 RGMII PHY) to cover the most extreme setups.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
8120ce17bf net: add Amlogic Meson G12A MDIO MUX driver
The Amlogic G12A & compatible SoCs embeds a mux to either communicate with
the external PHY or the internal 10/100 PHY.

This adds support for this mux as a MDIO MUX device.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
6c7bc9fec0 net: add MMIO Register MDIO MUX driver
Add support for MMIO register MDIO muxes based on the Linux mdio-mux-mmioreg driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-06 11:10:29 +02:00
Claudiu Manoil
fc054d563b net: Introduce DSA class for Ethernet switches
DSA stands for Distributed Switch Architecture and it covers switches that
are connected to the CPU through an Ethernet link and generally use frame
tags to pass information about the source/destination ports to/from CPU.
Front panel ports are presented as regular ethernet devices in U-Boot and
they are expected to support the typical networking commands.
DSA switches may be cascaded, DSA class code does not currently support
this.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2021-02-16 11:48:20 -05:00
Aaron Tseng
febe13b438 net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs
Add Cortina Access Ethernet device driver for CAxxxx SoCs.
This driver supports both legacy and DM_ETH network models.

Signed-off-by: Aaron Tseng <aaron.tseng@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com>

CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Abbie Chang <abbie.chang@Cortina-Access.com>
CC: Tom Rini <trini@konsulko.com>
2021-01-27 10:47:44 -05:00
Weijie Gao
17ade70b6a net: add ethernet driver for MediaTek MT7620 SoC
This patch adds  ethernet driver for MediaTek MT7620 SoC.

The MT7620 SoC has a built-in ethernet (Frame Engine) and a built-in
7-port switch and two xMII interfaces (can be MII/RMII/RGMII).

The port 0-3 of the switch connects to intergrited FE PHYs. Port 4 can be
configured to connect to either the intergrited FE PHY, or the xMII.
Port 5 always connects to the xMII. Port 6 is the CPU port.

This driver supports MT7530 giga switch connects to port 5.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:27 +01:00
Robert Marko
975151d056 net: Add IPQ40xx MDIO driver
This adds the driver for the IPQ40xx built-in MDIO.
This will be needed to support future PHY driver.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22 09:54:54 -04:00
Suneel Garapati
4684a7a43a net: Add NIC controller driver for OcteonTX2
Adds support for Network Interface controllers found on
OcteonTX2 SoC platforms.

Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-10-14 07:55:56 +02:00
Suneel Garapati
0008e9a69d net: Add NIC controller driver for OcteonTX
Adds support for Network Interface controllers found on
OcteonTX SoC platforms.

Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-10-14 07:55:56 +02:00
Heiko Schocher
6e31c62a17 net, qe: add DM support for QE UEC ethernet
add DM/DTS support for the UEC ethernet on QUICC Engine
Block.

Signed-off-by: Heiko Schocher <hs@denx.de>
Patch-cc: Mario Six <mario.six@gdsys.cc>
Patch-cc: Qiang Zhao <qiang.zhao@nxp.com>
Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com>

Series-changes: 3
- revert:
  commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled")
  as now qe works with DM and DM_ETH support.
- fix mailaddress from Holger

Series-changes: 2
- add comments from Qiang Zhao:
  - add device node documentation
  - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c
    because using drivers/net/fsl_mdio.c leads in none existent
    udevice mdio@3320
    instead boards with DM ETH support should use now this
    driver.
- remove RFC tag

Commit-notes:

- I let the old none DM based implementation in code
  so boards should work with old implementation.
  This Code should be removed if all boards are converted
  to DM/DTS.

- add the DM based qe uec driver under drivers/net/qe

- Therefore copied the files uccf.c uccf.h uec.h from
  drivers/qe. So there are a lot of Codingstyle problems
  currently. I fix them in next version if this RFC
  patch is OK or it needs some changes.

- The dm based driver code is now under drivers/net/qe/dm_qe_uec.c
  Used a lot of functions from drivers/qe/uec.c

- seperated the PHY specific code into seperate file
  drivers/net/qe/dm_qe_uec_phy.c

END
2020-09-17 06:09:53 +02:00
Michal Simek
664e16ce99 xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers
Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in
PL and vice versa. That's why change dependencies and do not limit enabling
just for some platforms.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-08-20 09:46:55 +02:00
Patrick Delaunay
a08f2f7b94 net: dwc_eth_qos: add Kconfig option to select supported configuration
Add configuration flag to select the supported dwc driver configuration:
- CONFIG_DWC_ETH_QOS_TEGRA186
- CONFIG_DWC_ETH_QOS_IMX
- CONFIG_DWC_ETH_QOS_STM32

See Linux driver ethernet/stmicro/stmmac and associated glue layers
for other configuration examples.

This patch removes the not-selected compatibles and lets the linker remove
the unused functions to reduce the size of the driver.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-08-04 23:30:02 -04:00
Marek Vasut
a410f13dfe net: dc2114x: Add Kconfig entries
Add Kconfig entries for the dc2114x driver and convert various boards.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25 11:24:02 +02:00
Amit Singh Tomar
3c5c4ee35f net: designware: s700: Add glue code for S700 mac
This patchs adds glue logic to enable designware mac present on
Action Semi based S700 SoC, Configures SoC specific bits.

Undocumented bit that programs the PHY interface select register
comes from vendor source.

It has been tested on Cubieboard7-lite based on S700 SoC.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-07-07 17:11:58 -04:00
Marek Vasut
d789a8259e net: pcnet: Add Kconfig entries
Add Kconfig entries for the pcnet driver and convert MIPS malta
to use those.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-18 19:34:41 +02:00
Marek Vasut
6463b73e0b net: eepro100: Add Kconfig entries
Add Kconfig entries for the eepro100 driver and convert various boards.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18 19:34:40 +02:00
Madalin Bucur
94472223c6 drivers: net: e1000: with DM_ETH needs DM_PCI too
Compilation error occur when DM_ETH is enabled without DM_PCI.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-03 12:14:27 +05:30
Marek Vasut
df4c4834fc net: ks8851: Add Kconfig entries
Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-22 19:46:45 +02:00
Trevor Woerner
bb0fb4c0f4 rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD
Have this symbol follow the pattern of all other such symbols.
This patch also removes a TODO from the code.

Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00