Video out on RK3288 boards has been broken since from few
releases due to the adding of reset support on vop but
missed enabling DM_RESET on associated boards.
This patch fixes those RK3288 boards.
Cc: Simon Glass <sjg@chromium.org>
Cc: Lin Huang <hl@rock-chips.com>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Fixes: <9749d2ea29e1> ("rockchip: video: vop: Add reset support")
Reported-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The uniphier i2c block can recognize some handshake errors.
But driver handles all error detections as no error if no timeout.
So this makes unrecoverable state.
This replaces the return values with the right ones to tell the i2c
framework the errors:
- EDEADLK for arbitration lost error
- ENODATA for no answer error
Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Since commit 2f96d4dd95 ("imx7s/d: synchronise device trees with linux")
the imx7d-pico board no longer boots.
The reason is that prior to the above commit there was an explicit
inclusion of arch/arm/dts/imx7d-pico-u-boot.dtsi inside imx7d-pico.dtsi.
After the syncing with the Linux upstream dtsi, this u-boot.dtsi inclusion
is gone and the board fails to boot.
U-Boot uses the imx7d-pico-pi.dtb file, so rename the u-boot.dtsi to
imx7d-pico-pi-u-boot.dtsi which gets included automatically by U-Boot
standard make logic and makes the board boot again.
Signed-off-by: Fabio Estevam <festevam@denx.de>
U-Boot build system builds final U-Boot binary for socrates board in custom
file u-boot-socrates.bin (instead of standard u-boot.bin). Output target
file u-boot-socrates.bin is generated by binman as defined in board binman
config file arch/powerpc/dts/socrates-u-boot.dtsi.
But binman was disabled in commit 5af42eafd7 ("Makefile: Reduce usage of
custom mpc85xx u-boot.bin target") for all mpc85xx boards which do not use
standard powerpc binman config file arch/powerpc/dts/u-boot.dtsi and boards
which do not require binman at all.
The only such mpc85xx board is socrates. So since that commit, U-Boot does
not final binary for socrates board anymore.
Fix this issue by re-enabling binman for socrates board. And build process
starts again producing u-boot-socrates.bin binary.
Note that build process for this socrates board always produce u-boot.bin
binary which is broken and not usable for socrates board. Long term
solution should be to disable building broken binary u-boot.bin and then
renaming u-boot-socrates.bin to u-boot.bin, or switching to use common
powerpc binman config file arch/powerpc/dts/socrates-u-boot.dtsi (if it is
possible).
Fixes: 5af42eafd7 ("Makefile: Reduce usage of custom mpc85xx u-boot.bin target")
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Heiko Schocher <hs@denx.de>
Do not access gd->ram_size and assume this is actual valid RAM size. Since commit
777aaaa706 ("common/memsize.c: Fix get_effective_memsize() to check for overflow")
the RAM size may be less than gd->ram_size , call get_effective_memsize() to get
the limited value instead.
The aforementioned commit makes STM32MP15xx boards with 1 GiB of DRAM
at 0xc0000000 hang on boot, which is a grave defect.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmO3l6kRHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreaUpQf+O3dJCPhOdr8Uxu4GjX5kcG2dGw7m5D4g
WgQXxWbXQVU0Uvm2wXeJDcLgA7A0VrnegBdKxeugh1Rp/YOP+Wa55NgeJ9cY+jA2
uovFB2FCope3T4JR1HyG1zStx9jZJgb/T0GOOUbHF0dmXytOUi7kwZ99CHo7nBv3
OFWaVjOt4MdbEMyaNvkI9wEpHiWXO49TfPQU0FKvNkRRVbWQWYHUBmbWpEL/8VSw
Y60YNmg6ZQIFrFneS6orl4oUNe1sTjK/UEZAL0SH5a7S5YkTsLBjlxO/1WdBOfLV
AiCyaAFdkviBPs2UPggrTn34tXCwAqAaKSQoNM+pBwX/jJsxLusZ1g==
=6oDn
-----END PGP SIGNATURE-----
Merge tag 'dm-next-5jan23' of https://source.denx.de/u-boot/custodians/u-boot-dm into next
patman enhancements and fixes
This makes it possible to configure a project to use some other
location or script than the default scripts/get_maintainer.pl one used
in the U-Boot and Linux projects. It can be configured via a .patman
configuration file and accepts arguments, as documented.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
This enables versioning a project specific patman configuration file.
It also makes it possible to declare the project name, which is not a
useful thing to do in $HOME/.patman. A new test is added, along
updated documentation.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Rationale: if the user explicitly provide this argument, they probably
intend for it to be used.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This better matches Python conventions, allowing to easily test
whether the optional argument is provided.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Instead of propagating it from the module entry point (main script).
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The SafeConfigParser class has been renamed in Python 3.2 to
ConfigParser, and the old alias has been deprecated since.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Remove extraneous imports, variables and comply to PEP 8 maximum line
width, among other PEP 8 changes suggested by Pyflake.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Document that this command is the default and what it's intended for.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Pytest offers useful features such as selecting tests by means of a
regular expression, or running the pdb debugger upon encountering a
test failure.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Some tests would fail when the test data is not available, so it
doesn't make much sense to expose the action when patman is running
outside of the u-boot git checkout.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
With this change, a user can run the patman test suite using Pytest
the same as when using 'patman test':
$ cd tools/patman && pytest
[...]
44 passed, 8 warnings in 8.87s
$ ./patman test
Ran 44 tests in 8.460s
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
This allows running the package as a Python module, like e.g.:
$ python -m patman
It also prevents Pytest from attempting to parse main.py, which
would cause errors.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Fix up main.py in __init__.py:
Signed-off-by: Simon Glass <sjg@chromium.org>
This resolves 10 out of 11 test failures seen when running './patman
test' from the 'tools/patman' subdirectory. This was caused by the
.checkpatch.conf configuration file at the root of the project not
being picked up. Make the test suite of patman independent from it by
always invoking the checkpatch.pl script with the minimally required
arguments for the test suite to pass.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Previously it would rely on the executing script location, which could
break for example when running the tests via 'pytest'.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
This patch fixes all the PEP 8 warnings reported by Pyflake for the
gitutil module.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Rationale: this is more robust than assumptions about the file
hierarchy layout of the installation of patman, for example on non
file-hierarchy standard (FHS) systems such as Guix System or Nix OS.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This fixes a regression introduced in commit 74df491051 ("buildman:
Convert documentation to rST").
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
distutils is about to meet its demise [1]. Switch to setuptools.
[1] https://peps.python.org/pep-0632/
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add support for at91 reset controller's basic assert/deassert
operations. Since this driver conflicts with the
SYSRESET driver because they both bind to the same RSTC node,
implement a custom bind hook that would manually bind the
sysreset driver, if enabled, to the same RSTC DT node.
Furthermore, delete the no longer needed compatibles from the
SYSRESET driver and rename it to make sure than any possible
conflicts are avoided.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Tested-by: Mihai Sain <mihai.sain@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Add the required pinctrl, gpio and phy properties required by the
USB DT nodes of the sama7g5ek boards. Since these have not yet been
defined in upstream Linux, place them in the U-Boot specific DT file.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Define the USB and UTMI DT nodes for the sama7g5 SoC's. Since these have
not yet been defined in upstream Linux, place them in the U-Boot specific
DT file.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Upstream linux commit 5994f58977e0.
Add reset bindings for SAMA7G5. At the moment only USB PHYs are
included.
The three reset USB phy's have their ID's mapped from 4 to 6. There are
no USB phy's with ID's numbered from 0 to 3.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Add the required pinctrl and gpio properties required by the USB DT
nodes of the sam9x60ek boards.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Add the required pinctrl and gpio properties needed by the USB DT nodes
of the sam9x60_curiosity boards.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Documentation:
* Describe building documentation
UEFI:
* Add .data section to aarch64 EFI binaries and correct section flags
* Correct sorting of capsules when updating
* Populate console handles in system table
Other:
* Fix description of eth_env_[gs]et_enetaddr() return value
* Avoid endless loop in sound play command
-----BEGIN PGP SIGNATURE-----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=ItVV
-----END PGP SIGNATURE-----
Merge tag 'efi-2023-01-rc5-3' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2023-01-rc5-3
Documentation:
* Describe building documentation
UEFI:
* Add .data section to aarch64 EFI binaries and correct section flags
* Correct sorting of capsules when updating
* Populate console handles in system table
Other:
* Fix description of eth_env_[gs]et_enetaddr() return value
* Avoid endless loop in sound play command
The fields ConsoleInHandle, ConsoleOutHandle, ConsoleErrHandle must point
to the handles with the respective console protocols. Failure to do so
leads to an error in the EFI Shell:
No SimpleTextInputEx was found. CTRL-based features are not usable.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Up to now we only compared the first letter of the capsule name to sort
them alphabetically. Properly sort by the Unicode alphabet.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
While our EFI binaries execute without problems on EDK II they crash on
a Lenovo X13s. Let our binaries look more like what EDK II produces:
* move all writable data to a .data section
* align sections to 4 KiB boundaries (matching EFI page size)
* remove IMAGE_SCN_LNK_NRELOC_OVFL from .reloc section flags
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Provide constants for the section flags used by binaries.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Per env/common.c, eth_env_get_enetaddr() returns the same return
values as is_valid_ethaddr(), i.e. true if valid, false otherwise.
Per env/common.c, eth_env_set_enetaddr() may return -EEXIST is the
ethaddr is already set. Fix both.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
A parameter starting with a hyphen leads to an endless loop in the sound
play command.
Leave it to dectoul() to handle the hyphen. It will return 0 for a negative
number.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Set blue led on at boot time in order to highlight that u-boot is loaded.
This is done for all sam9x60 based boards which contain an RGB led.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
