Commit graph

773 commits

Author SHA1 Message Date
Simon Glass
2a9e2c6a09 buildman: Try to guess the upstream commit
Buildman normally obtains the upstream commit by asking git. Provided that
the branch was created with 'git checkout -b <branch> <some_upstream>' then
this normally works.

When there is no upstream, we can try to guess one, by looking up through
the commits until we find a branch. Add a function to try this and print
a warning if buildman ends up relying on it.

Also update the documentation to match.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-14 21:16:52 -08:00
Simon Glass
1a91567510 buildman: Don't prune output space for 'current source' build
This is not needed since we always do a full (non-incremental) build. Also
it might be dangerous since it will try to delete everything below the
base directory.

Fix this potentially nasty bug.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Simon Glass
05c96b187a buildman: Put build in 'current', not 'current/current'
Buildman currently puts current-source builds in a current/current
subdirectory, but there is no need for the extra depth.

Suggested-by: Albert Aribaud <albert.u.boot@aribaud.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Simon Glass
4466c1f943 buildman: Add tests that check the correct output directory is used
Add a few tests of the output directory logic.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Tom Rini
bd5053ffa5 Merge branch 'buildman' of git://git.denx.de/u-boot-x86
Conflicts:
	tools/buildman/control.py

Signed-off-by: Tom Rini <trini@ti.com>
2015-01-14 11:00:38 -05:00
Simon Glass
8a388085c7 x86: Correct ifdtool microcode calculation
This currently assumes that U-Boot resides at the start of ROM. Update
it to remove this assumption.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-13 07:24:58 -08:00
Andreas Bießmann
f411b8f227 tools/kwbimage.c: fix parser error handling
The two error checks for image_boot_mode_id and image_nand_ecc_mode_id where
wrong and would never fail, fix that!

This was detected by Apple's clang compiler:
---8<---
  HOSTCC  tools/kwbimage.o
tools/kwbimage.c:553:20: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
                if (el->bootfrom < 0) {
                    ~~~~~~~~~~~~ ^ ~
tools/kwbimage.c:571:23: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
                if (el->nandeccmode < 0) {
                    ~~~~~~~~~~~~~~~ ^ ~
2 warnings generated.
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-By: Jeroen Hofstee <jeroen@myspectrum.nl>
2015-01-11 09:05:03 -05:00
Łukasz Majewski
93e9371f00 fix: tools: kwbimage.c: Initialize headersz to suppress warning
When building with my toolchain (4.8.2):
CROSS_COMPILE=/home/lukma/work/ptxdist/toolchains/arm/OSELAS.Toolchain-2013.12.0/arm-v7a-linux-gnueabi/gcc-4.8.2-glibc-2.18-binutils-2.24-kernel-3.12-sanitized/bin/arm-v7a-linux-gnueabi-

I see following WARNING:
tools/kwbimage.c: In function "kwbimage_set_header":
tools/kwbimage.c:803:8: warning: "headersz" may be used uninitialized in this function [-Wmaybe-uninitialized]
  memcpy(ptr, image, headersz);
        ^
This fix aims to suppress it.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2015-01-10 14:09:55 -05:00
Dirk Behme
3e1ded1fff buildman: Fix some typos in README
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-29 16:31:24 -05:00
Simon Glass
d2c6181d2d x86: Add a script to process Intel microcode files
Intel delivers microcode updates in a microcode.dat file which must be
split up into individual files for each CPU. Add a tool which performs
this task. It can list available microcode updates for each model and
produce a new microcode update in U-Boot's .dtsi format.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2014-12-18 17:26:08 -07:00
Simon Glass
31eca69727 x86: ifdtool: Add support for early microcode access
Some Intel CPUs use an 'FSP' binary blob which provides an inflexible
means of starting up the CPU. One result is that microcode updates can only
be done before RAM is available and therefore parsing of the device tree
is impracticle.

Worse, the addess of the microcode update must be stored in ROM since a
pointer to its start address and size is passed to the 'FSP' blob. It is
not possible to perform any calculations to obtain the address and size.

To work around this, ifdtool is enhanced to work out the address and size of
the first microcode update it finds in the supplied device tree. It then
writes these into the correct place in the ROM. U-Boot can then start up
the FSP correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-12-18 17:26:05 -07:00
Simon Glass
65851fcec3 x86: ifdtool: Use a structure for the file/address list
Rather than two independent arrays, use a single array of a suitable
structure. Also add a 'type' member since we will shortly add additional
types.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-12-18 17:26:04 -07:00
Simon Glass
fa8d3b00f9 x86: ifdtool: Display filename when file errors are reported
When a file is missing it helps to know which file. Update the error message
to print this information.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-12-18 17:26:04 -07:00
Simon Glass
7e8ffa4ed8 x86: ifdtool: Correct a debug() missing parameter
This is missing a parameter. Fix it to avoid a warning when debug is
enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-12-18 17:26:04 -07:00
Simon Glass
7dfb172d67 x86: ifdtool: Separate out filenames for -D and -i
To allow these options to be specified together, separate them out.

Change-Id: Ib93f11cd51eb3302127f4c82936ff2b44c88d5a2
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-12-13 22:32:04 -07:00
Bin Meng
673ed2f8c2 tools/ifdtool: Support writing multiple files (-w) simultaneously
Currently ifdtool only supports writing one file (-w) at a time.
This looks verbose when generating u-boot.rom for x86 targets.
This change allows at most 16 files to be written simultaneously.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-13 22:32:04 -07:00
Alison Wang
94cb17d078 ls102xa: pblimage: Add pblimage tool support for LS102xA
For LS102xA, the size of spl/u-boot-spl.bin is variable.
This patch adds the support to deal with the variable
u-boot size in pblimage tool. It will be padded to 64
byte boundary.

Use pblimage_check_params() to add the specific operations
for ARM, such as PBI CRC and END command and the calculation
of pbl_cmd_initaddr.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-11 09:36:34 -08:00
Tom Rini
97cdf64026 Merge branch 'sandbox' of git://git.denx.de/u-boot-x86 2014-12-04 09:24:05 -05:00
Simon Glass
1d8104fe88 buildman: Don't default to -e when building current source
We probably don't need to enable this option by default. It is useful to
display only failure boards (not errors) and it is easy to add -e if it
is required. Also update the docs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-26 20:25:40 -07:00
Simon Glass
f66153be19 buildman: Fix repeating board list with -l
Ensure that we don't print duplicate board names when -l is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-26 20:25:40 -07:00
Simon Glass
0b5b409acc patman: Use the full commit hash for 'git checkout'
Even with the initial 8 characeters of the hash we will sometimes get a
collision. Use the full hash.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-26 20:25:39 -07:00
Tom Rini
ce267335c3 buildman: Save *.img files too
When saving binary files we likely want to keep any .img files that have
been generated as well.

Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-11-26 20:25:39 -07:00
Bin Meng
908ec6e4d1 tools: Add ifdtool to .gitignore
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-11-25 07:11:17 -07:00
Tom Rini
dee332ffb7 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2014-11-24 12:02:12 -05:00
Simon Glass
c03c951b06 x86: ifdtool: Allow creation of an empty ROM
Allow an empty ROM to be created, without needing to provide a descriptor.
The descriptor is not needed on some x86 boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:05 +01:00
Simon Glass
cd392fe8a0 x86: Add ifdtool for working with Intel Flash Descriptor ROM images
Newer Intel chips require a Management Engine which requires a particular
format for the SPI flash that contains the boot loader. Add a tool that
supports creating and modifying these ROM images.

This tool is from Chrome OS but has been cleaned up to use U-Boot style
and to add comments. A few features have been added also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:11 +01:00
Albert ARIBAUD
3cb4b713e1 tools/msximage.c: fix warning about nptr possibly uninitialized
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2014-11-20 10:30:19 +01:00
Alexey Ignatov
7a139959d0 ARM: mxs: tools: Add support for boot progress display flag
mkimage -T mxs now support new flag in config file:
DISPLAYPROGRESS - makes boot process print HTLLC characters for each BootROM
instruction.

Signed-off-by: Alexey Ignatov <lexszero@gmail.com>
2014-11-20 10:13:45 +01:00
Dominik Muth
e72be8947e Added support for comments in input to mkenvimage.
This patch adds support for comments in the input to mkenvimage, i.e. in
the environment source: All lines starting with a # in the firs column
will be ignored.

Additionally empty lines will also be ignored.

Signed-off-by: Dominik Muth <dominik.muth@bkvibro.com>
2014-11-10 16:25:28 -05:00
Dominic Sacré
ea19527c20 tools/env: Fix environment size and CRC on 64-bit hosts
On architectures where 'long' is 64 bit, the u-boot environment
as seen by the fw_env tools was missing 4 bytes.
This patch fixes getenvsize(), and thus also ensures that the
environment's CRC32 checksum is calculated correctly.

Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
2014-11-07 16:27:07 -05:00
Masahiro Yamada
ffe29ebc07 kbuild: sync top Makefile with Linux 3.18-rc1
Since Linux 3.15, relative path feature and related fixes,
cleanups have been merged to the top Makefile.

The relative path feature looks stable enough, so let's import it
to U-Boot along with various cleanups.

Commits imported from Linux (some need adjustment) are:

[1] commit 7e1c04779efd by Michal Marek
  kbuild: Use relative path for $(objtree)

[2] commit 890676c65d69 by Michal Marek
  kbuild: Use relative path when building in the source tree

[3] commit 9da0763bdd82 by Michal Marek
  kbuild: Use relative path when building in a subdir of the source tree

[4] commit c2e28dc975ea by Michal Marek
  kbuild: Print the name of the build directory

[5] commit 066b7ed95580 by Michal Marek
  kbuild: Do not print the build directory with make -s

[6] commit 3f1d9a6cec01 by Michal Marek
  kbuild: make -s should be used with kernelrelease/kernelversion/image_name

[7] commit 7ff525712acf by Masahiro Yamada
  kbuild: fake the "Entering directory ..." message more simply

[8] commit 745a254322c8 by Masahiro Yamada
  kbuild: use $(Q) for sub-make target

[9] commit aa55c8e2f7a3 by Masahiro Yamada
  kbuild: handle C=... and M=... after entering into build directory

[10] commit ab7474ea5361 by Borislav Petkov
  Kbuild: Ignore GREP_OPTIONS env variable

To use relative path feature, tools/Makefile and scripts/Makefile.autoconf
must be tweaked.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-07 16:27:06 -05:00
Tom Rini
625509ab0e Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2014-11-05 12:48:09 -05:00
Gerald Kerma
26f195c712 ARM: kwimage: fix v0 format
This patch fix the kwimage tools for version 0 fileformat used for kirkwood
Tested on sheevaplug

Signed-off-by: Gerald Kerma <drEagle@doukki.net>
Tested-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
2014-11-04 15:03:07 -05:00
Simon Glass
1ddda1b321 patman: Use the full commit hash for 'git checkout'
Even with the initial 8 characeters of the hash we will sometimes get a
collision. Use the full hash.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-03 14:12:39 -07:00
Simon Glass
58d818f19f buildman: Don't default to -e when using -s
When using summary mode (-s) we don't always want to display errors.
Allow this option to be omitted.

Series-to: u-boot
Series-cc: albert
Change-Id: I6b37754d55eb920ecae114fceba55834b43ea3b9
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-03 14:10:53 -07:00
Simon Glass
be338a5149 buildman: Fix repeating board list with -l
Ensure that we don't print duplicate board names when -l is used.

Change-Id: I56adb138fc18f772ba61eba0fa194cdd7bc7efc6
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-03 14:10:52 -07:00
Ye.Li
de97980478 imximage: Fix the bootdata.size calculation
In system boot chapter of i.MX6 reference manual, the "Image Vector Table"
figure shows the bootdata.start points to the beginning of the destination
memory. It means the bootdata.size should contain the IVT offset part,
but the calculation in imximage tool does not have.

We found this issue when booting from QuadSPI NOR on i.MX6SX. The u-boot
runs into abnormal (crash or stop) after booting. After checked the destination
memory where the image is loaded to, there are hundreds of bytes at
the image end are not loaded into memory. Since there is a 4096 bytes
round in the calculation, for the booting devices using smaller IVT offset,
such as SD and SPI booting, they are not easy to reproduce.

Signed-off-by: Ye.Li <B37916@freescale.com>
2014-11-03 10:33:01 +01:00
Stefan Roese
934a529f94 tools/kwbimage: Fix compilation warning
This patch fixes a compilation warning of kwbimage.c:

tools/kwbimage.c: In function ‘kwbimage_set_header’:
tools/kwbimage.c:784:8: warning: ‘headersz’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  memcpy(ptr, image, headersz);
        ^
Instead of using multiple if statements, use a switch statement with
a default entry. And return with error if an unsupported version
is configured in the cfg file.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-By: Wolfgang Denk <wd@denx.de>
2014-10-31 00:29:29 +01:00
Andreas Bießmann
e5f1a586a7 tools/kwbimage.c: fix build on darwin
kwbimage uses get_current_dir_name(3) which is a gnu extension and not
available on darwin host. Fix this by converting to portable getcwd(3)
function.

This patch fixes the following error:
---8<---
  HOSTCC  tools/kwbimage.o
tools/kwbimage.c:399:16: warning: implicit declaration of function 'get_current_dir_name' is invalid in C99 [-Wimplicit-function-declaration]
                        char *cwd = get_current_dir_name();
                                    ^
tools/kwbimage.c:399:10: warning: incompatible integer to pointer conversion initializing 'char *' with an expression of type 'int' [-Wint-conversion]
                        char *cwd = get_current_dir_name();
                              ^     ~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
...
Undefined symbols for architecture x86_64:
  "_get_current_dir_name", referenced from:
      _image_headersz_v1 in kwbimage.o
ld: symbol(s) not found for architecture x86_64
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
[agust: fixed getcwd() return warning]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-10-31 00:26:12 +01:00
Andreas Bießmann
bedcf395b3 gitignore: ignore atmel pmecc parameter tool
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-10-27 17:54:13 -04:00
Tom Rini
0cf8761549 Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx 2014-10-27 11:03:00 -04:00
Marek Vasut
5038d7f189 ppc: Zap Hymod board
Remove this board as this is the only one last user of eeprom_probe(),
which is pretty non-standard stuff.

This patch also removes all the PHP, SQL and CSS stuff from U-Boot,
which probably makes U-Boot a bit less IoT ;-)

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
2014-10-27 14:35:55 +01:00
Andreas Bießmann
686ed2c228 tools/socfpgaimage.c: fix build on darwin
socfpgaimage utilizes htole32 and friends, unfortunately these functions are
not available on darwin. Fix it by using the cpu_to_le32 and friends defined
in compiler.h as other parts in mkimage do.

This patch fixes the following error:
---8<---
  HOSTCC  tools/socfpgaimage.o
tools/socfpgaimage.c:77:22: warning: implicit declaration of function 'htole32' is invalid in C99 [-Wimplicit-function-declaration]
        header.validation = htole32(VALIDATION_WORD);
                            ^
tools/socfpgaimage.c:80:22: warning: implicit declaration of function 'htole16' is invalid in C99 [-Wimplicit-function-declaration]
        header.length_u32 = htole16(length_bytes/4);
                            ^
tools/socfpgaimage.c:95:6: warning: implicit declaration of function 'le32toh' is invalid in C99 [-Wimplicit-function-declaration]
        if (le32toh(header.validation) != VALIDATION_WORD)
            ^
tools/socfpgaimage.c:97:6: warning: implicit declaration of function 'le16toh' is invalid in C99 [-Wimplicit-function-declaration]
        if (le16toh(header.checksum) != hdr_checksum(&header))
            ^
4 warnings generated.
...
  HOSTLD  tools/dumpimage
Undefined symbols for architecture x86_64:
  "_htole16", referenced from:
      _socfpgaimage_set_header in socfpgaimage.o
  "_htole32", referenced from:
      _socfpgaimage_set_header in socfpgaimage.o
  "_le16toh", referenced from:
      _verify_buffer in socfpgaimage.o
  "_le32toh", referenced from:
      _verify_buffer in socfpgaimage.o
ld: symbol(s) not found for architecture x86_64
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Pavel Machek <pavel@denx.de>
2014-10-27 02:26:24 +01:00
Stefan Roese
4acd2d24b6 tools: kwbimage: Add image version 1 support for Armada XP / 370
This patch integrates the Barebox version of this kwbimage.c file into
U-Boot. As this version supports the image version 1 type for the
Armada XP / 370 SoCs.

It was easier to integrate the existing and known to be working Barebox
source than to update the current U-Boot version to support this
v1 image header format. Now all Marvell MVEBU SoCs are supported:

Image type 0: Kirkwood & Dove
Image type 1: Armada 370 & Armada XP

Please note that the current v1 support has this restuction (same as
has Barebox version):

Not implemented: support for the register headers and secure headers
in v1 images

Tested on Marvell DB-78460-BP eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Luka Perkov <luka@openwrt.org>
2014-10-23 09:59:21 -04:00
Stefan Roese
2afa331260 tools: Compile kwboot for Marvell Armada XP as those SoCs are now supported
Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Luka Perkov <luka@openwrt.org>
2014-10-23 09:59:21 -04:00
Stefan Roese
84899e2db3 tools/kwboot: Sync with latest barebox version to support Armada XP
The barebox version of the kwboot tool has evolved a bit. To support
Armada XP and Dove. Additionally a few minor fixes have been applied.
So lets sync with the latest barebox version.

Please note that the main difference between both versions now is, that
the U-Boot version still supports the -p option, to dynamically patch
an image for UART boot mode. I didn't test it now though.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Luka Perkov <luka@openwrt.org>
2014-10-23 09:59:21 -04:00
Charles Manning
832472a94d tools: socfpga: Add socfpga preloader signing to mkimage
Like many platforms, the Altera socfpga platform requires that the
preloader be "signed" in a certain way or the built-in boot ROM will
not boot the code.

This change automatically creates an appropriately signed preloader
from an SPL image.

The signed image includes a CRC which must, of course, be generated
with a CRC generator that the SoCFPGA boot ROM agrees with otherwise
the boot ROM will reject the image.

Unfortunately the CRC used in this boot ROM is not the same as the
Adler CRC in lib/crc32.c. Indeed the Adler code is not technically a
CRC but is more correctly described as a checksum.

Thus, the appropriate CRC generator is added to lib/ as crc32_alt.c.

Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>

V2: - Zap unused constant
    - Explicitly print an error message in case of error
    - Rework the hdr_checksum() function to take the *header directly
      instead of a plan buffer pointer
2014-10-06 17:38:17 +02:00
Masahiro Yamada
540d434aa4 tools: remove reformat.py
This tools is unnecessary since commit f6c8f38ec6
(tools/genboardscfg.py: improve performance more with Kconfiglib).

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-24 18:30:29 -04:00
Masahiro Yamada
5dff844d7f tools/genboardscfg.py: pick up also commented maitainers
We are still keeping invalid email addressed in MAINTAINERS
because they carry information.

The problem is that scripts/get_maintainer.pl adds emails in the
"M:" field including invalid ones.

We want to comment out invalid email addresses in MAINTAINERS
to prevent scripts/get_maintainer.pl from picking them up.
On the other hand, we want to collect them for boards.cfg
to know the last known maintainer of each board.

This commit adjusts tools/genboardscfg.py to parse also
the commented "M:" fields, which is useful for the next commit.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-24 18:30:28 -04:00
Thomas Petazzoni
bdc7dc4595 tools/env: change stripping strategy to allow no-stripping
When building the U-Boot tools for non-ELF platforms (such as Blackfin
FLAT), since commit 79fc0c5f49
("tools/env: cross-compile fw_printenv without setting HOSTCC"), the
build fails because it tries to strip a FLAT binary, which does not
make sense.

This commit solves this by changing the stripping logic in
tools/env/Makefile to be similar to the one in tools/Makefile. This
logic continues to apply strip to the final binary, but does not abort
the build if it fails, and does the stripping in place on the final
binary. This allows the logic to work fine if stripping doesn't work,
as it leaves the final binary untouched.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: Sonic Zhang <sonic.zhang@analog.com>
2014-09-24 18:30:27 -04:00
Simon Glass
983a2749e2 patman: Add a -m option to avoid copying the maintainers
The get_maintainers script is a useful default, but sometimes is copies
too many people, or takes a long time to run.

Add an option to disable it and update the README.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-21 12:03:07 -06:00
Simon Glass
7798e2285f buildman: Fix the logic for the bloat command
This check should now be done whatever mode buildman is running in, since
we may be displaying information while building.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-21 12:03:07 -06:00
Masahiro Yamada
9170818a4e kconfiglib: change SPDX-License-Identifier to ISC
Commit f219e01311 (tools: Import Kconfiglib)
added SPDX GPL-2.0+ to this library by mistake.
It should be ISC.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Ulf Magnusson <ulfalizer@gmail.com>
2014-09-17 21:03:18 -04:00
Tom Rini
e38b15b061 Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-09-17 18:01:04 -04:00
Masahiro Yamada
f6c8f38ec6 tools/genboardscfg.py: improve performance more with Kconfiglib
The idea of using Kconfiglib was given by Tom Rini.
It allows us to scan lots of defconfigs very quickly.
This commit also uses multiprocessing for further acceleration.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Suggested-by: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-09-16 12:23:56 -04:00
Masahiro Yamada
f219e01311 tools: Import Kconfiglib
Kconfiglib is the flexible Python Kconfig parser and library
created by Ulf Magnusson.
(https://github.com/ulfalizer/Kconfiglib)

This commit imports kconfiglib.py from
commit ce84c22e58fa59cb93679d4ead03c3cd1387965e,
with ISC SPDX-License-Identifier.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Cc: Ulf Magnusson <ulfalizer@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
2014-09-16 12:23:56 -04:00
Masahiro Yamada
d0ea61d9ca buildman: fix typos of --dry-run help message
try run    => dry run
no nothing => do nothing
"..."      => '...'

The last one is for consistency with the other option helps.

Change-Id: I1d69047d1fae6ef095a18f69f44ee13c448db9b7
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:48:06 -06:00
Thierry Reding
f3d015cb4a buildman: Create parent directories as necessary
When creating build directories also create parents as necessary. This
fixes a failure when building a hierarchical branch (i.e. foo/bar).

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@ti.com>
2014-09-09 16:38:32 -06:00
Vadim Bendebury
1f7278851e patman: make run results better visible
For an occasional user of patman some failures are not obvious: for
instance when checkpatch reports warnings, the dry run still reports
that the email would be sent. If it is not dry run, the warnings are
shown on the screen, but it is not clear that the email was not sent.

Add some code to report failure to send email explicitly.

Tested by running the script on a patch with style violations,
observed error messages in the script output.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:31 -06:00
Simon Glass
950a23133d buildman: Ignore conflicting tags
Tags like Series-version are normally expected to appear once, and with a
unique value. But buildman doesn't actually look at these tags. So ignore
conflicts.

This allows bulidman to build a branch containing multiple patman series.

Reported-by: Steve Rae <srae@broadcom.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:31 -06:00
Simon Glass
f7582ce849 buildman: Permit branch names with an embedded '/'
At present buildman naively uses the branch name as part of its directory
path, which causes problems if the name has an embedded '/'.

Replace these with '_' to fix the problem.

Reported-by: Steve Rae <srae@broadcom.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:31 -06:00
Simon Glass
930c8d4ad8 buildman: Expand output test to cover directory prefixes
Now that buildman supports removing the build directory prefix from output,
add a test for it. Also ensure that output directories are removed when the
test completes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:30 -06:00
Simon Glass
dfb7e93235 buildman: Add additional functional tests
This adds coverage of core features of the builder, including the
command-line options which affect building.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:30 -06:00
Simon Glass
891b7a0761 patman: Start with a clean series when needed
For reasons that are not well-understood, GetMetaDataForList() can end up
adding to an existing series even when it appears that it should be
starting a new one.

Change from using a default constructor parameter to an explicit one, to
work around this problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:30 -06:00
Simon Glass
883a321a4b buildman: Provide an internal option to clean the outpur dir
For testing it is useful to clean the output directory before running a
test. This avoids a test interfering with the results of a subsequent
test by leaving data around.

Add this feature as an optional parameter to the control logic.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:29 -06:00
Simon Glass
fb3954f9ea buildman: Correct counting of build failures on retry
When a build is to be performed, buildman checks to see if it has already
been done. In most cases it will not bother trying again. However, it was
not reading the return code from the 'done' file, so if the result was a
failure, it would not be counted. This depresses the 'failure' count stats
that buildman prints in this case.

Fix this bug by always reading the return code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:29 -06:00
Simon Glass
823e60b62a buildman: Allow tests to have their own boards
Rather than reading boards.cfg, which may take time to generate and is not
necessarily suitable for running tests, create our own list of boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:29 -06:00
Simon Glass
8b985eebd0 buildman: Avoid looking at config file or toolchains in tests
These files may not exist in the environment, or may not be suitable for
testing. Provide our own config file and our own toolchains when running
tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:28 -06:00
Simon Glass
fd03d63f34 buildman: Set up bsettings outside the control module
Move the bsettings code back to the main buildman.py file, so we can do
something different when testing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:28 -06:00
Simon Glass
d4144e45b4 buildman: Add a functional test
Buildman currently lacks testing in many areas, including its use of git,
make and many command-line flags.

Add a functional test which covers some of these areas. So far it does
a fake 'build' of all boards for the current source tree.

This version reads the real ~/.buildman and boards.cfg files. Future work
will improve this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:28 -06:00
Simon Glass
82012dd284 patman: Provide a way to intercept commands for testing
Add a test point for the command module. This allows tests to emulate
the execution of commands. This provides more control (since we can make
the fake 'commands' do whatever we like), makes it faster to write tests
since we don't need to set up as much environment, and speeds up test
execution.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:27 -06:00
Simon Glass
48ba5856eb buildman: Move full help code into the control module
There is no good reason to keep this code separate. Move it into control.py
so it is easier to test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:27 -06:00
Simon Glass
d3d5c12331 buildman: Move the command line code into its own file
We want to be able to issue parser commands from within buildman for test
purposes. Move the parser code into its own file so we don't end up needing
the buildman and test modules to reference each other.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:27 -06:00
Simon Glass
ddaf5c8f30 patman: RunPipe() should not pipe stdout/stderr unless asked
RunPipe() currently pipes the output of stdout and stderr to a pty, but
this is not the intended behaviour. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:24 -06:00
Simon Glass
6208fcef94 buildman: Enhance basic test to check summary output
Adjust the basic test so that it checks all console output. This will help
to ensure that the builder is behaving correctly with printing summary
information.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 13:54:23 -06:00
Simon Glass
4653a8826f buildman: Send builder output through a function for testing
To allow us to verify the builder's console output, send it through a
function which can collect it when running in test mode.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 13:54:23 -06:00
Simon Glass
3c6c0f81bf patman: Add a way of recording terminal output for testing
When running unit tests we don't want output to go to the terminal.
Provide a way of collecting it so that it can be examined by test code
later.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 13:54:22 -06:00
Ye.Li
03ea24b2a9 imximage: Fix imximage IVT bug for EIM-NOR boot
The load region size of EIM-NOR are defined to 0. For this case,
the parameter "imximage_init_loadsize" must be calculated.
The imximage tool implements the calculation in the "imximage_generate"
function, but the following function "imximage_set_header" resets the value
and not calculate. This bug cause some fields of IVT head are not
correct, for example the boot_data and DCD overlay the application area.

Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-09 16:39:02 +02:00
Fabio Estevam
021e79c853 tools: imximage: Fix the maximum DCD size for mx53/mx6
According to mx53 and mx6 reference manuals:

"The maximum size of the DCD limited to 1768 bytes."

As each DCD entry consists of 8 bytes, we have a total of 1768 / 8 = 221, and
excluding the first entry, which is the header leads to 220 as the maximum
number for DCD size.

Reported-by: Jonas Karlsson <jonas.d.karlsson@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Nitin Garg <nitin.garg@freescale.com>
Acked-by: Nitin Garg <nitin.garg@freescale.com>
2014-09-09 16:23:00 +02:00
Simon Glass
0b703dbcee patman: Fix detection of git version
A missing 'global' declaration means that this feature does not currently
work. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:43 -06:00
Simon Glass
e30965db0c buildman: Separate out display of warnings and errors
Some boards unfortunately build with warnings and it is useful to be able
to easily distinguish the warnings from the errors.

Use a simple pattern match to categorise gcc output into warnings and
errors, and display each separately. New warnings are shown in magenta (with
a w+ prefix) and fixed warnings are shown in yellow with a w- prefix.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:43 -06:00
Simon Glass
ed9666573e buildman: Add an option to show which boards caused which errors
Add a -l option to display a list of offending boards against each
error/warning line. The information will be shown in brackets as below:

02: wip
   sandbox: +   sandbox
       arm: +   seaboard
+(sandbox) arch/sandbox/cpu/cpu.c: In function 'timer_get_us':
+(sandbox) arch/sandbox/cpu/cpu.c:40:9: warning: unused variable 'i' [-Wunused-variable]
+(seaboard) board/nvidia/seaboard/seaboard.c: In function 'pin_mux_mmc':
+(seaboard) board/nvidia/seaboard/seaboard.c:36:9: warning: unused variable 'fred' [-Wunused-variable]
+(seaboard)      int fred;
+(seaboard)          ^

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:43 -06:00
Simon Glass
48c1b6a8ff buildman: Remove the directory prefix from each error line
The full path is long and also includes buildman private directories.
Clean this up, so that only a relative U-Boot path is shown.

This will change warnings like these:

/home/sjg/c/src/third_party/u-boot/buildman5/.bm-work/00/arch/sandbox/cpu/cpu.c: In function 'timer_get_us':
/home/sjg/c/src/third_party/u-boot/buildman5/.bm-work/00/arch/sandbox/cpu/cpu.c:40:9: warning: unused variable 'i' [-Wunused-variable]

/home/sjg/c/src/third_party/u-boot/files/arch/sandbox/cpu/cpu.c: In function 'timer_get_us':
/home/sjg/c/src/third_party/u-boot/files/arch/sandbox/cpu/cpu.c:40:9: warning: unused variable 'i' [-Wunused-variable]

to:

arch/sandbox/cpu/cpu.c: In function 'timer_get_us':
arch/sandbox/cpu/cpu.c:40:9: warning: unused variable 'i' [-Wunused-variable]

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:43 -06:00
Simon Glass
3cf4ae6f86 buildman: Implement an option to exclude boards from the build
Some boards are known to be broken and it is convenient to be able to
exclude them from the build.

Add an --exclude option to specific boards to exclude. This uses the
same matching rules as the normal 'include' arguments, and is a comma-
separated list of regular expressions.

Suggested-by: York Sun <yorksun@freescale.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:43 -06:00
Simon Glass
f60c9d4f39 buildman: Allow make-flags variables to include '-' and '_'
These characters are commonly used in variables, so permit them. Also
document the permitted characters.

Reported-by: Tom Rini <trini@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:42 -06:00
Simon Glass
2c3deb9758 buildman: Set the return code to indicate build result
When buildman finds errors/warnings when building, set the return code to
indicate this.

Suggested-by: York Sun <yorksun@freescale.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:42 -06:00
Simon Glass
d0c5719d92 patman: Avoid changing the order of tags
patman collects tags that it sees in the commit and places them nicely
sorted at the end of the patch. However, this is not really necessary and
in fact is apparently not desirable.

Suggested-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-05 13:40:42 -06:00
Simon Glass
9447a6b2f6 patman: Use --no-pager' to stop git from forking a pager
In a headless environment the pager can apparently hang. We don't want a
pager anyway so let's request that none be used.

Reported-by: Tom Rini <trini@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:42 -06:00
Simon Glass
7428dc14b0 patman: Remove the -a option
It seems that this is no longer needed, since checkpatch.pl will catch
whitespace problems in patches. Also the option is not widely used, so
it seems safe to just remove it.

Suggested-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:42 -06:00
Simon Glass
e752edcb6b patman: Correct unit tests to run correctly
It seems that doctest behaves differently now, and some of the unit tests
do not run. Adjust the tests to work correctly.

 ./tools/patman/patman --test
<unittest.result.TestResult run=10 errors=0 failures=0>

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:41 -06:00
Simon Glass
6ba5737ff0 patman: Fix indentation in terminal.py
This code came from a different project with 2-character indentation. Fix
it for U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:41 -06:00
Masahiro Yamada
2134342e57 tools/genboardscfg.py: change shebang into /usr/bin/env python2
This tool only works on python 2 (python 2.6 or lator).

Change the shebang to make sure the script is run by python 2
and clearly say the supported version in the comment block.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-28 17:18:49 -04:00
Masahiro Yamada
9a65cb7ffe tools/genboardscfg.py: improve performance
I guess some developers are already getting sick of this tool
because it generally takes a few minites to generate the boards.cfg
on a reasonable computer.

The idea popped up on my mind was to skip Makefiles and
to run script/kconfig/conf directly.
This tool should become about 4 times faster.
You might still not be satisfied, but better than doing nothing.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:49 -04:00
Masahiro Yamada
d1bf4afda6 tools/genboardscfg.py: check if the boards.cfg is up to date
It looks silly to regenerate the boards.cfg even when it is
already up to date.

The tool should exit with doing nothing if the boards.cfg is newer
than any of defconfig, Kconfig and MAINTAINERS files.

Specify -f (--force) option to get the boards.cfg regenerated
regardless its time stamp.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:49 -04:00
Masahiro Yamada
79d45d32bc tools/genboardscfg.py: fix minor problems on termination
This tool deletes the incomplete boards.cfg
if it encounters an error or is is terminated by the user.

I notice some problems even though they rarely happen.

[1] The boards.cfg is removed if the program is terminated
during __gen_boards_cfg() function but before boards.cfg
is actually touched.  In this case, the previous boards.cfg
should be kept as it is.

[2] If an error occurs while deleting the incomplete boards.cfg,
the program throws another exception.  This hides the privious
exception and we will not be able to know the real cause.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:49 -04:00
Masahiro Yamada
d6538d22de tools/genboardscfg.py: wait for unfinished subprocesses before error-out
When an error occurs or the program is terminated by the user
on the way, the destructer __del__ of class Slot is invoked and
the work directories are removed.

We have to make sure there are no subprocesses (in this case,
"make O=<work_dir> ...") using the work directories before
removing them.  Otherwise the subprocess spits a bunch of error
messages possibly causing more problems.  Perhaps some users
may get upset to see too many error messages.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:48 -04:00
Masahiro Yamada
13246f4861 tools/genboardscfg.py: be tolerant of insane Kconfig
The tools/genboardscfg.py expects all the Kconfig and defconfig are
written correctly.  Imagine someone accidentally has broken a board.
Error-out just for one broken board is annoying for the other
developers.  Let the tool skip insane boards and continue processing.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:48 -04:00
Masahiro Yamada
b8828e8ff3 tools/genboardscfg.py: be tolerant of missing MAINTAINERS
tools/genboardscfg.py expects all the boards have MAINTAINERS.
If someone adds a new board but misses to add its MAINTAINERS file,
tools/genboardscfg.py fails to generate the boards.cfg file.
It is annoying for the other developers.

This commit allows tools/genboardscfg.py to display warning messages
and continue processing even if some MAINTAINERS files are missing
or have broken formats.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:48 -04:00
Masahiro Yamada
04b43f3273 tools/genboardscfg.py: ignore defconfigs starting with a dot
Kconfig in U-Boot creates a temporary file configs/.tmp_defconfig
during processing "make <board>_defconfig".  The temporary file
might be left over for some reasons.

Just in case, tools/genboardscfg.py should make sure to
not read such garbage files.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:48 -04:00
Masahiro Yamada
390f7035d3 buildman: run genboardscfg.py all the time
This commit makes sure boards.cfg is up to date before starting
the build tests.  tools/genboardscfg.py exits immediately printing
"boards.cfg is up to date. Nothing to do." when boards.cfg is
already new.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:48 -04:00