Commit graph

5363 commits

Author SHA1 Message Date
Wolfgang Grandegger
5d5bd838f7 TQM85xx: Fix CPM port pin configuration
Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
as serial interface anyway. Worse, on some board variants configuring the
pins for SCC1 leads to short circuits (for example on the TQM8541-BG).

Signed-off-by: Martin Krause <martin.krause@tqs.de>
2008-06-10 23:53:03 -05:00
Wolfgang Grandegger
b99ba1679e TQM85xx: Various coding style fixes
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-10 23:52:56 -05:00
Gerald Van Baren
ae9e97fa96 libfdt: Move the working_fdt pointer to cmd_fdt.c
The working_fdt pointer was declared in common/fdt_support.c but was
not used there.  Move it to common/cmd_fdt.c where it is used (it is
also used in lib_ppc/bootm.c).

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-06-10 22:23:23 -04:00
Kim Phillips
e489b9c078 fdt: unshadow global working fdt variable
differentiate with local variables of the same name by renaming the
global 'fdt' variable 'working_fdt'.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 22:23:17 -04:00
Andy Fleming
e1eb0e25d9 socrates: Fix PCI clk fix patch
The submitted patch seems to have been more up-to-date, but an older patch was
already in the repository.  This patch encompasses the differences

Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>

Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-06-10 18:49:34 -05:00
Wolfgang Grandegger
a75a57ef6e NAND FSL UPM: driver re-write using the hwcontrol callback
This is a re-write of the NAND FSL UPM driver using the more universal
hwcontrol callback (instead of the cmdfunc callback). Here is a brief
list of furher modifications:

- For the time being, the UPM setup writing the UPM array has been
  removed from the driver and must now be done by the board specific
  code.

- The bus width definition in "struct fsl_upm_nand" is now in bits to
  comply with the corresponding Linux driver and 8, 16 and 32 bit
  accesses are supported.

- chip->dev_read is only set if fun->dev_ready != NULL, which is
  required for boards not connecting the R/B pin.

- A few issue have been fixed with MxMR bit manipulation like in the
  corresponding Linux driver.

Note: I think the "io_addr" field of "struct fsl_upm" could be removed
      as well, because the address is already determined by
      "nand->IO_ADDR_[RW]", but I'm not 100% sure.

This patch has been tested on a TQM8548 modules with the NAND chip
Micron MT29F8G08FABWP.

This patch is based on the following patches posted to this list a few
minutes ago:

  PPC: add accessor macros to clear and set bits in one shot
  83xx/85xx/86xx: add more MxMR local bus definitions

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-06-10 18:22:26 -05:00
Wolfgang Grandegger
6beecfbb54 MPC85xx: Beautify boot output of L2 cache configuration
The boot output is now aligned poperly with other boot output
lines, e.g.:

  FLASH: 128 MB
  L2:    512 KB enabled

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-10 18:22:26 -05:00
Wolfgang Grandegger
398415114f PPC: add accessor macros to clear and set bits in one shot
PPC: add accessor macros to clear and set bits in one shot

This patch adds macros from linux/include/asm-powerpc/io.h to clear and
set bits in one shot using the in_be32, out_be32, etc. accessor functions.
They are very handy to manipulate bits it I/O registers.

This patch is required for my forthcoming FSL NAND UPM driver re-write and
the support for the TQM8548 module.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-10 18:22:26 -05:00
Wolfgang Grandegger
4677988c7e TQM: move TQM boards to board/tqc
Move all TQM board directories to the vendor specific directory "tqc"
for modules from TQ-Components GmbH (http://www.tqc.de).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-10 18:22:26 -05:00
Wolfgang Grandegger
6fab2fe72c 83xx/85xx/86xx: add more MxMR local bus definitions
83xx/85xx/86xx: add more MxMR local bus definitions

This patch adds more macro definitions for the UPM Machine Mode Registers
They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
required for my forthcoming FSL NAND UPM driver re-write and the support
for the TQM8548 module.

This patch is based on the following two patches from Anton Vorontsov:

http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html

I leave coding style violation fixes, code beautification and name
corrections to somebody else ;-(.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-10 18:22:26 -05:00
Anton Vorontsov
c8c5fc266e 83xx/85xx: further localbus cleanups
Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-06-10 18:22:25 -05:00
Anton Vorontsov
42dbd667c8 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
use it on MPC85xx and MPC86xx processors.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-06-10 18:22:25 -05:00
Kumar Gala
730b2fcf6f 85xx: Add setting of cache props in the device tree.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10 18:22:25 -05:00
Kumar Gala
4dbdb7681e 85xx: expose cpu identification
The current cpu identification code is used just to return the name
of the processor at boot.  There are some other locations that the name
is useful (device tree setup).  Expose the functionality to other bits
of code.

Also, drop the 'E' suffix and add it on by looking at the SVR version
when we print this out.  This is mainly to allow the most flexible use
of the name.  The device tree code tends to not care about the 'E' suffix.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10 18:22:25 -05:00
Kim Phillips
2329fe113d mpc83xx: MVBLM7: minor build fixups
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 13:34:27 -05:00
Andre Schwarz
a1293e549b add MPC8343 based board mvBlueLYNX-M7 (board+make files)
Add MPC8343 based board mvBlueLYNX-M7.
It's a single board stereo camera system.
Please read doc/README.mvblm7 for details.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 13:07:58 -05:00
Andre Schwarz
c005b93925 add MPC8343 based board mvBlueLYNX-M7 (doc+config)
Add MPC8343 based board mvBlueLYNX-M7.
It's a single board stereo camera system.
Please read doc/README.mvblm7 for details.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 12:52:57 -05:00
Anton Vorontsov
f9023afbdf 83xx/85xx: further localbus cleanups
move the BRx_* and ORx_* left behind in mpc85xx.h 

The same is needed for mpc8xx.h and mpc8260.h (defines are almost
the same, just few differences which needs some attention though).

But the bad news for mpc8xx and mpc8260 is that there are a lot of users
of these defines. So this cleanup I'll leave for the "better times".

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 12:30:13 -05:00
Anton Vorontsov
bf30bb1f7c 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
use it on MPC85xx and MPC86xx processors.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 12:28:08 -05:00
Tor Krill
d82b4fc0ce Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
Signed-off-by: Tor Krill <tor@excito.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 12:19:04 -05:00
Shinya Kuribayashi
3b904ccb93 net: Conditional COBJS inclusion of network drivers
Replace COBJS-y with appropriate driver config names.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-09 23:21:05 -07:00
Gerald Van Baren
2fb698bf50 Use strncmp() for the fdt command
Cleaner than doing multiple conditionals on characters.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-06-09 21:13:49 -04:00
Gerald Van Baren
47abe8ab29 The fdt boardsetup command criteria was not unique
It was checking just for "b", which is not unique with respect to the
"boot" command.  Change to check for "boa"[rdsetup].

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-06-09 21:13:44 -04:00
David Gibson
2f08bfa952 libfdt: Several cleanups to parameter checking
This patch makes a couple of small cleanups to parameter checking of
libfdt functions.

	- In several functions which take a node offset, we use an
idiom involving fdt_next_tag() first to check that we have indeed been
given a node offset.  This patch adds a helper function
_fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().

	- In fdt_rw.c in several places we have the expanded version
of the RW_CHECK_HEADER() macro for no particular reason.  This patch
replaces those instances with an invocation of the macro; that's what
it's for.

	- In fdt_sw.c we rename the check_header_sw() function to
sw_check_header() to match the analgous function in fdt_rw.c, and we
provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
functions in fdt_rw.c

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2008-06-09 21:13:39 -04:00
Gerald Van Baren
fec6d9ee7c Remove the deprecated CONFIG_OF_FLAT_TREE
Use CONFIG_OF_LIBFDT instead to support flattened device trees.  It is
cleaner, has better functionality, and is better supported.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-06-09 21:13:35 -04:00
Gerald Van Baren
62bcdda293 Change the stxxst to CONFIG_OF_LIBFDT
This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
to CONFIG_OF_LIBFDT.

WARNING: It appears that this board lost its ability to boot via a
flattened device tree prior to this changeset.

WARNING: This conversion was untested because I do not have a board to
test it on.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-06-09 21:13:29 -04:00
Gerald Van Baren
589c04271d Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
to CONFIG_OF_LIBFDT.

WARNING: This conversion is untested because I do not have a board to
test it on.

NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
/aliases/ethernet1 property for the ethernet to work.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-06-09 21:13:24 -04:00
Kumar Gala
ee1e35bede 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09 13:31:20 -05:00
Becky Bruce
3b9519fc50 MPC85xx: Change traps.c to not reference non-addressable memory
Currently, END_OF_RAM is used by the trap code to determine if
we should attempt to access the stack pointer or not. However,
on systems with a lot of RAM, only a subset of the RAM is
guaranteed to be mapped in and accessible.  Change END_OF_RAM
to use get_effective_memsize() instead of using the raw ram
size out of the bd.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-09 13:31:20 -05:00
Nobuhiro Iwamatsu
7faddaecea sh: Renesas Solutions SH7763RDP board support
SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
In this patch, support SCIF, NOR Flash, and Ethernet.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-06-09 14:23:19 +09:00
Nobuhiro Iwamatsu
60179098a9 sh: Add support Renesas SH7763
Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
This patch supprts CPU register's header file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-06-09 14:20:57 +09:00
Nobuhiro Iwamatsu
08c5fabe18 sh: SH7763 SCIF support
SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
but only SCIF2 is different. This patch work all SCIF channel.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-06-09 14:20:55 +09:00
Ben Warren
e44f3ea4e8 Merge branch 'master' of git://git.denx.de/u-boot 2008-06-08 22:04:22 -07:00
Shinya Kuribayashi
79b51ff820 [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
Also get rid of some #ifdefs in *.c files.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-06-07 20:51:59 +09:00
Shinya Kuribayashi
8bde63eb3f [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
CONFIG_SOC_AU1X00

  Common Alchemy Au1x00 stuff. All Alchemy processor based machines
  need to have this config as a system type specifier.

CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
CONFIG_SOC_AU1500, CONFIG_SOC_AU1550

  Machine type specifiers. Each port should have one of aboves.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-06-07 20:51:56 +09:00
Stuart Wood
cc49cadeeb env_nand.c: Added bad block management for environment variables
Modified to check for bad blocks and to skipping over them when
CFG_ENV_RANGE has been defined.
CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
flash block size.

Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-06-06 11:06:45 -05:00
Becky Bruce
279726bd00 MPC86xx: Change traps.c to not reference non-addressable memory
Currently, END_OF_RAM is used by the trap code to determine if
we should attempt to access the stack pointer or not. However,
on systems with a lot of RAM, only a subset of the RAM is
guaranteed to be mapped in and accessible.  Change END_OF_RAM
to use get_effective_memsize() instead of using the raw ram
size out of the bd to prevent us from trying to access
non-mapped memory.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-06 10:55:35 -05:00
Jon Loeliger
1a247ba7fa Merge commit 'wd/master' 2008-06-06 10:48:31 -05:00
Wolfgang Denk
338cc03846 tools/mkimage: fix compiler warnings on some systems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-06-06 16:21:12 +02:00
Stefan Roese
b2815f7928 ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
We use upper case letters for the AMCC processor defines (like
CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
not CONFIG_440SPe. This patch fixes the last misspelled config options.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-06-06 16:10:41 +02:00
Stefan Roese
72675dc6c0 ppc4xx: Unify AMCC's board config files (part 3/3)
This patch series unifies the AMCC eval board ports by introducing
a common include header for all AMCC eval boards:

include/configs/amcc-common.h

This header now includes all common configuration options/defines which
are removed from the board specific headers.

The reason for this is ease of maintenance and unified look and feel
of all AMCC boards.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-06-06 15:55:21 +02:00
Stefan Roese
490f204096 ppc4xx: Unify AMCC's board config files (part 2/3)
This patch series unifies the AMCC eval board ports by introducing
a common include header for all AMCC eval boards:

include/configs/amcc-common.h

This header now includes all common configuration options/defines which
are removed from the board specific headers.

The reason for this is ease of maintenance and unified look and feel
of all AMCC boards.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-06-06 15:55:03 +02:00
Stefan Roese
a8a11a9ed0 ppc4xx: Unify AMCC's board config files (part 1/3)
This patch series unifies the AMCC eval board ports by introducing
a common include header for all AMCC eval boards:

include/configs/amcc-common.h

This header now includes all common configuration options/defines which
are removed from the board specific headers.

The reason for this is ease of maintenance and unified look and feel
of all AMCC boards.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-06-06 15:54:31 +02:00
Remy Bohmer
0e38c938ed DM9000 fix status check fail 0x6d error for trizeps board
According to the Application Notes of the DM9000, only the 2 bits 0:1 of
the status byte need to be checked to identify a valid packet in the fifo

But, The several different Application Notes do not all speak the same
language on these bits. They do not disagree, but only 1 Application Note
noted explicitly that only these 2 bits need to be checked.
Even the datasheets do not mention anything about these 2 bits.

Because the old code, and the kernel check the whole byte, I left this piece
untouched.

However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
it should work.

Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
in the fifo) is much shorter now, compared to the older U-boot driver code,
so that we can maybe run into a hardware condition now that was never seen
before, or maybe was seen very unfrequently.

Additionaly added a cleanup of a stack variable.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-05 23:47:28 -07:00
Shinya Kuribayashi
7daf2ebe91 [MIPS] Update <asm/addrspace.h> header
- Fix traditional KSEG names
- Replace PHYSADDR with CPHYSADDR

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-06-05 22:29:00 +09:00
Shinya Kuribayashi
f0d5a6f060 [MIPS] mips_config.mk: Misc fixes
- Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
- Modify comments

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-06-05 22:29:00 +09:00
Shinya Kuribayashi
5f64d21c9a [MIPS] Kill unused <version.h> inclusions
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-06-05 22:29:00 +09:00
Shinya Kuribayashi
a55d48174c [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
MIPS port has two problems in timer routines. One is now we assume CFG_HZ
equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
in the U-Boot system.

The other is we don't have a proper time management counter like timestamp
other ARCHs have. We need the 32-bit millisecond clock counter.

This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
of calculated CP0 counter cycles in a CFG_HZ.

STRATEGY:

* Fix improper CFG_HZ value to have 1000

* Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.

* timer_init: initialize timestamp and set up the first timer expiration.
  Note that we don't need to initialize CP0 count/compare registers here
  as they have been already zeroed out on the system reset. Leave them as
  they are.

* get_timer: calculate how many timestamps have been passed, then return
  base-relative timestamp. Make sure we can easily count missed timestamps
  regardless of CP0 count/compare value.

* get_ticks: return the current timestamp, that is get_timer(0).

Most parts are from good old Linux v2.6.16 kernel.

v2:
- Remove FIXME comments as they turned out to be trivial.
- Use CP0 compare register as a global variable for expirelo.
- Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
  instead.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-06-05 22:29:00 +09:00
Shinya Kuribayashi
199e4f657c [MIPS] lib_mips/time.c: Fix udelay
What we have to do is just to wait for given micro-seconds. No need to
take into account current time, get_timer and CFG_HZ.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-06-05 22:29:00 +09:00
Shinya Kuribayashi
c7e38e413a [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
This patch replaces mips_{compare,count}_set and mips_count_get with
existing macros.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-06-05 22:28:59 +09:00