Commit graph

28 commits

Author SHA1 Message Date
Andy Yan
9eea50162c microblaze: spl: configure SYS_MALLOC_F_LEN independently for SPL and full U-Boot
Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.

Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-27 14:59:03 +02:00
Michal Simek
1d82e2c15c microblaze: Fix endif macro command
Use correct name in endif comment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10 13:59:36 +01:00
Michal Simek
48470b7a20 microblaze: Wire-up debug_uart in asm
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:50 +01:00
Albert ARIBAUD
ecc306639e Fix board init code to respect the C runtime environment
board_init_f_mem() alters the C runtime environment's
stack it is actually already using. This is not a valid
behaviour within a C runtime environment.

Split board_init_f_mem into C functions which do not alter
their own stack and always behave properly with respect to
their C runtime environment.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-13 21:05:17 -05:00
Simon Glass
cd2bee3544 microblaze: Add a TODO to call board_init_f_mem()
This C function should be used to do the early memory layout and init. This
is beyond my powers, so just add a TODO for the maintainer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-10-24 13:50:37 -04:00
Michal Simek
ca7d22662e microblaze: spl: Do not call mem_malloc_init and use early alloc
This patch has some parts connected together:
- Use _gd in bss section which is automatically cleared
  Location at SPL_MALLOC_END wasn't cleared at all
- Use MALLOC_F_LEN(early alloc) instead of FULL MALLOC
  (mem_malloc_init is not called at all)
- Simplify malloc and stack init.
  At the end of SPL addr is malloc area and below is stack

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:13:12 +01:00
Michal Simek
405e651d70 microblaze: Add support for CONFIG_SYS_MALLOC_F_LEN
Create space for dm_init where calloc is called
and malloc_base has to be initialized.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:13:12 +01:00
Michal Simek
0510b14b73 microblaze: Do not use CONFIG_SYS_GENERIC_GLOBAL_DATA
Because it is not compatible with DM where
malloc_base has to be available early and init
has to be done in ASM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:13:12 +01:00
Michal Simek
7c4dd54255 microblaze: Speedup code copy
Remove one instruction in the loop which speedup
code copying.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:12:46 +01:00
Michal Simek
e945f6dc28 microblaze: Move architecture to use generic board init
Compile code with -fPIC to get GOT. Do not build SPL
with fPIC because it increasing SPL size for nothing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:11:56 +01:00
Michal Simek
9cef20b109 microblaze: Fix gd_t address which is placed at the end of BRAM
Setup gd from ASM to be availalbe for board_init_r.
Setting it up in spl_board_init is too late when
MALLOC is used.
Space for gd is located behind MALLOC area at the end of BRAM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:09:58 +01:00
Michal Simek
e4a4743e48 microblaze: Remove unused asm label
It is not used at all that's why remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-02-09 15:09:58 +01:00
Michal Simek
da931af1b5 microblaze: Support stack protection feature
Ensure that stack didn't rewrite important part
of u-boot.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-21 10:33:07 +01:00
Michal Simek
822d43a6d9 microblaze: Enable hardware exception by default
Enable hardware exception by default to be able to
handle it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-21 10:20:36 +01:00
Michal Simek
9d24274509 microblaze: Add SPL support
Add support for U-BOOT SPL. NOR and RAM mode are supported.
There are 3 images in NOR flash. u-boot.img, dtb and kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-02-04 16:39:50 +01:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Michal Simek
5811830fae microblaze: Flush caches before enabling them
Flushing caches is necessary because of soft reset
which doesn't clear caches.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-11-07 17:11:14 +01:00
Michal Simek
2380b8f529 microblaze: Clean microblaze initialization
Move board specific function to board_init function in board/ folder
Remove externs from generic board.c
Use board_init_f function in board.c file.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stephan Linz <linz@li-pro.net>
2012-09-11 09:24:58 +02:00
Michal Simek
575a3d21f6 microblaze: intc: Clear interrupt code
Clear and prepare for device-tree driven configuration.
Remove CONFIG_SYS_INTC_0 definition
Use dynamic allocation instead of static.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Simon Glass <sjg@chromium.org>
2012-07-10 11:54:06 +02:00
Michal Simek
5562bcc241 microblaze: Clean up reset asm code
- Remove code copying
- Reset address is setup from first stage bootloader
- Support reset vector setup on little endian

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03 08:01:56 +02:00
Michal Simek
f3090fce77 microblaze: Save and restore first unused vector
Use one memory space to detect little/big endian platforms.
The first unused address(0x28) is used instead 0x0 address (reset vectors).
Detection rewrited reset vector setup from first stage bootloader.

Workflow:
1. Store 0x28 to r7
2. Do little/big endian test
3. Restore r7 to 0x28

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03 08:01:56 +02:00
Michal Simek
86c1b2a86b microblaze: Setup MB vectors if feature is enable for u-boot
For example: Setup reset vectors if reset address is setup.
Setup user exception vector if user exception is enabled

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03 08:01:56 +02:00
Michal Simek
dfc10703d7 microblaze: Remove debug saving value
Forget to remove debug code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03 08:01:55 +02:00
Wolfgang Denk
071bc92330 Coding Style cleanup
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-27 22:48:30 +02:00
Wolfgang Denk
25ddd1fb0a Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:05:30 +02:00
Wolfgang Denk
14d0a02a16 Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE
The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.

Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-18 22:07:10 +02:00
Michal Simek
b98cba0911 microblaze: Support little-endian microblaze target
Microblaze little-endian toolchain should export
__MICROBLAZEEL__.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-12 16:51:34 +10:00
Peter Tyser
6260fb0458 microblaze: Move cpu/microblaze/* to arch/microblaze/cpu/*
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-04-13 09:13:26 +02:00
Renamed from cpu/microblaze/start.S (Browse further)