Commit graph

64457 commits

Author SHA1 Message Date
Ioana Ciornei
8b6558bd41 board: ls1088ardb: transition to DM_ETH
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for
DPAA2 Ethernet devices. Compile out any unnecessary setup when
CONFIG_DM_ETH is activated.
Also, force the PCI devices to be enumerated at probe time.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Ioana Ciornei
988e33f8d4 drivers: net: fsl-mc: add support for CONFIG_DM_ETH
Make any adjustments necessary in order to support DPAA2 devices probed
using CONFIG_DM_ETH. While at it, fixup some styling issues aroung the
switch-case statement.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Ioana Ciornei
267c5146d3 drivers: net: ldpaa: add DTS based probing support
When CONFIG_DM_ETH is enabled DPAA2 network interfaces will now probe
based on DTS nodes with the "fsl,qoriq-mc-dpmac" compatible.
In this case, transform the ldpaa_eth driver into a UCLASS_ETH driver
and reuse the _open()/_tx()/_stop() functions already inplemented.

For the moment, the ldpaa_eth driver will support both configurations:
with or without CONFIG_DM_ETH enabled. Any 'struct eth_device' occurrence
now has a matching 'struct udevice' made mutually exclusive based on the
state of CONFIG_DM_ETH.

Signed-off-by: Florin Laurentiu Chiculita <florinlaurentiu.chiculita@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:43 +05:30
Ioana Ciornei
52e16ec613 drivers: net: add Layerscape mEMAC MDIO driver
Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate
Ethernet Media Access Controller) and the Fman 10G Ethernet MACs.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 10:49:20 +05:30
Meenakshi Aggarwal
3a67cbf3d7 lx2160a : Update eMMC boot environment variable
Update mcinitcmd and bootcmd environment variable for emmc boot.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
3eb4065996 configs: ls208xa: Enable GIC_V3_ITS config
Enable GIC_V3_ITS config to initialize the GIC redistributor
tables.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
fd52f298bb configs: ls1028a: Enable GIC_V3_ITS config
Enable GIC_V3_ITS config to initialize the GIC redistributor
tables.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
d50e8ce108 configs: ls1088a: Enable GIC_V3_ITS config
Enable GIC_V3_ITS config to initialize the GIC redistributor
tables.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
f40b120e93 fsl-layerscape: Move GIC RD tables init to soc.c
Move GIC redistributor tables initialization to CPU setup function.

This patch introduces a GIC redistributor tables init function, and
moves the function of reserving memory for GIC redistributor tables
to soc.c and adds a argument for the memory size to reserve, BTW
rename the function so that it is more readable.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
0d5b0711e9 fsl-layerscape: Kconfig: Select RESV_RAM if GIC_V3_ITS
The GIC redistributor tables initialization depends on RESV_RAM config,
so select RESV_RAM if GIC_V3_ITS is enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
90ae271393 board: lx2160a: Align RD tables address to 64KB
As the lower 16bit of the redistributor pending table is reserved
for describing the memory attributes, we must give a 64KB aligned
address to the GIC LPI initialization function.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
df32ce2dbe board: lx2160a: Add check in GIC RD tables init
Program the GIC redistributor tables only when succeeded to reserve memory
for them, otherwise kernel will lose the chance to program them using
allocated memory.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
6ebd48835f fsl-layerscape: Add RESV_RAM check in resv_ram addr
The initialization of gd->arch.resv_ram pointer should depend on if the
RESV_RAM config is enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Yuantian Tang
35ad8f7af4 armv8: ls1046ardb: update the DIMM WRLVL_START value
The WRLVL_START values are optimized for old DDR MTA18ASF1G72AZ.
Update DDR struct to set new WRLVL_START values so that the new DIMM
MTA18ADF2G72AZ get optimized and the old DIMM still works.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Alison Wang
33c3dfd297 configs: ls1021a: Append CMA configuration to bootargs
The default reserved memory for CMA is high memory. If LPAE is enabled,
highmem pages are non-remapped and can not be used with
dma_alloc_coherent. Reserving low memory for CMA is needed for LS1021A.
This patch appends the related CMA configuration to bootargs.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Biwen Li
fad129f329 include/configs: ls1012afrwy: support dhcp boot
Add support of dhcp boot for ls1012afrwy

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Tom Rini
d16d37bcd4 - simple panel 'nv140fhmn49' compatible
- rockchip eDP and LVDS drivers build fix
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXqaXIA4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXBhpAJsGrm29zjaK8WeS54o5CxBG9yO99QCfeyDcItgq
 GdIEdz3+0v16Z2nOElg=
 =jaeU
 -----END PGP SIGNATURE-----

Merge tag 'video-for-v2020.07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- simple panel 'nv140fhmn49' compatible
- rockchip eDP and LVDS drivers build fix
2020-04-27 09:41:51 -04:00
Peter Robinson
ea16637525 video: simple_panel: add boe,nv140fhmn49 display
add "boe,nv140fhmn49" display to compatible node.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
2020-04-26 23:04:49 +02:00
Peter Robinson
973e31fd47 drivers: video: rockchip: fix building eDP and LVDS drivers
The rk_edp.c and rk_lvds.c files reference rk_setreg which is declared in
hardware.h so include it so the drivers build. Adjust rk_lvds.c so
includes are in alphabetical order while updating.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
2020-04-26 22:58:50 +02:00
Tom Rini
d202f67db0 Merge branch '2020-04-25-master-imports'
- Assorted minor fixes
- Actions S700 SoC and Cubieboard7 support
2020-04-25 08:20:22 -04:00
Heinrich Schuchardt
691132e850 rtc: ds1374: typo Watchdog
%s/Watchdoc/Watchdog/

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24 16:40:09 -04:00
Rasmus Villemoes
cffedec2e8 spi: mpc8xxx_spi: fix missing dev_err definition
The build currently fails with

drivers/spi/mpc8xxx_spi.c:64:3: warning: implicit declaration of function ‘dev_err’ [-Wimplicit-function-declaration]
...
drivers/spi/built-in.o: In function `mpc8xxx_spi_set_speed':
drivers/spi/mpc8xxx_spi.c:227: undefined reference to `dev_err'

Fixes: 4856cc7a97 (mpc8xxx_spi: implement real ->set_speed)
Fixes: 1a7b462dee (mpc8xxx_spi: put max_cs to use)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-04-24 16:40:09 -04:00
Heinrich Schuchardt
077e72c6e6 spl: fit: do not check argument of free()
The free() function checks if its argument is NULL. It is superfluous to do
the same check on the calling side.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
dd786d4c4c MAINTAINERS: add entry for cubieboard7 config
This commit adds entry for cubieboard7 config under Actions Semi
OWL family.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
5f0ec25974 doc: boards: add Cubieboard7 documentation
This adds build and flash steps for Actions S700
based Cubieboard7 board.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
99d5ac6f15 arm: add Cubieboard7 board support
The Cubieboard is a single board computer containing a
Actions S700 SoC(with 4 ARMv8 Cortex-A53 cores).

This patch adds respective defconfig alongwith .dts(copied
from Linux v5.5-rc6 with hash "b3a987b0264d").

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
d5c819b885 actions: Move defconfig options to Kconfig
This patch moves some of the config options from bubblegum_96_defconfig
to respective Kconfig files.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
78e4f4594d arm: add support Actions Semi S700
This patch adds basic support for Actions Semi based S700
SoC, which is driven by common owl framework.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
ea6314a797 arm: dts: actions: s700: add u-boot specific dtsi file
Devices like uart and clk are needed to be enabled before relocation.
this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
1050eaa082 arm: actions: add S700 SoC device tree
This patch adds .dtsi file(sync with Linux 5.5-rc6 with hash "b3a987b0264d")
and required binding for S700 SoC that is a 64-bit Quad-core ARM
Cortex-A53 cores.

It also provisions dts file to be built based on selected
platform(CONFIG_MACH_S900/S700).

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
8b520ac153 clk: actions: Add common clock driver
This patch converts S900 clock driver to something common that can
be used for other SoCs, for instance S700(few of clk registers are same).

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
5bc4c0bccc arm: dts: actions: s900: add u-boot specific dtsi file
Devices like uart and clk are needed to be enabled before relocation.
This patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
4939beea8e arm: dts: sync dts for Action Semi S900
Synchronize device tree bindings with v5.5-rc6 tag with commit id
"b3a987b0264d".

Also, it removes older clock binding defined for S900 along with undocumented
compatible string "actions,s900-serial" from serial driver and adapts clock
driver to cater to new bindings.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
bf66584336 serial: actions: add compatible string
This patch adds "actions,owl-uart" string to the owl uart driver. It
is also defined in Linux kernel.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
d996f35403 arm: actions: rename sysmap-s900 to sysmap-owl
Now that memory maps(for both S700 and S900 SoCs) can be managed using
a common file, rename sysmap-s900 to sysmap-owl to reflect the same.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
b1a6bb3b59 arm: actions: Add common framework for Actions Owl Semi SoCs
This commit adds common arch support for Actions Semi Owl
series SoCs and removes the Bubblegum96 board files.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Heinrich Schuchardt
c11f0d88ba coccinelle: adjust NULL check before free()
The free() function checks if its argument is NULL. We should avoid
checking for NULL before calling free like in

    if (result->tds)
        free(result->tds);

The list of relevant functions differs between Linux and U-Boot, e.g. we
use free().

Adjust the list of relevant functions.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24 16:40:09 -04:00
Heinrich Schuchardt
cb2a2ebd4f coccinelle: check for casting malloc output
Casting the (void *) output of memory allocation functions before
assignment like in

	sata->cmd_hdr_tbl_offset = (void *)malloc(length + align);

is useless.

Adopt the Linux kernel script
scripts/coccinelle/api/alloc/alloc_cast.cocci.

Now 'make coccicheck' generates warnings like:

./drivers/ata/fsl_sata.c:143:29-33:
WARNING: casting value returned by memory allocation function
to (void *) is useless.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24 16:40:09 -04:00
Masahiro Yamada
b5a2046376 kbuild: cherry-pick kbuild changes from Linux
b42841b7bb62 kbuild: Get rid of KBUILD_STR
2aedcd098a94 kbuild: suppress annoying "... is up to date." message
9c8fa9bc08f6 kbuild: fix if_change and friends to consider argument order
ebf003f0cfb3 kbuild: Consolidate header generation from ASM offset information
2982c953570b kbuild: remove redundant $(wildcard ...) for cmd_files calculation
8a78756eb545 kbuild: create object directories simpler and faster
4d4b5c2e3b6e treewide: remove explicit rules for *offsets.s
01d509a48b46 kbuild: remove unimportant comments from ./Kbuild

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-24 16:40:09 -04:00
Masahiro Yamada
c3da3f5808 kbuild: add FORCE to dependency of $(obj)/dts/dt-platdata.o
if_changed must have FORCE as a prerequisite.

Add $(obj)/dts/dt-platdata.o to 'targets' so that the corresponding
.cmd file is included.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-24 16:40:09 -04:00
Ley Foon Tan
f62782fb29 cache: l2x0: Fix write to incorrect shared-override bit
The existing code write bit-0 for shared attribute override enable bit.
It should be bit-22 based on cache controller specification [1].

[1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0246f/DDI0246F_l2c310_r3p2_trm.pdf

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-24 16:40:09 -04:00
Patrick Delaunay
a3d7cb1939 README: remove references on no more used config CONFIG_SYS_RCAR_I2C*
Remove the references in README on CONFIG_SYS_RCAR_I2C_* not use
in U-Boot drivers/i2c/rcar_i2c.c, since commit a4d9aafadb ("i2c:
 rcar_i2c: Remove the driver") and commit a06a0ac36d ("i2c: rcar_i2c:
 Add DM and DT capable I2C driver")

Checked by the command: grep -r SYS_RCAR_I2C *
And these CONFIG are only defined in
arch/arm/mach-rmobile/include/mach/rcar-base.h

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-24 16:40:09 -04:00
Patrick Delaunay
b5d5d90822 cosmetic: README: Fix one CONFIG name
Only replace CONFIF_ by CONFIG_

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-24 16:40:09 -04:00
Simon Glass
3a905cd231 dm: mmc: Update mmc_get_mmc_dev() to use const *
This function does not modify the device to change it to use const *, so
that callers with a const udevice * can call it without a cast.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-24 16:40:09 -04:00
Simon Glass
f05970380e pci: Add a macro to convert BDF from linux to U-Boot
U-Boot's BDF format has its bits in the same position as the device tree
PCI definition.

Some x86 devices use linux format in their register format and it is
useful to be able to convert to U-Boot format. Add a macro for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-24 16:40:09 -04:00
Simon Glass
2c2ca207e4 uuid: Use const char * where possible
Update the arguments of these functions so they can be called from code
which uses constant strings.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-24 16:40:09 -04:00
Simon Glass
fdc79a6b12 lib: Add a function to convert a string to upper case
Add a helper function for this operation. Update the strtoul() tests to
check upper case as well.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24 16:40:09 -04:00
Simon Glass
4f04d54981 test: Add the beginnings of some string tests
There are quite a few string functions in U-Boot with no tests. Make a
start by adding a test for strtoul().

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-24 16:40:09 -04:00
Michal Simek
4b4858936f lib: strto: Stop detection when invalid char is used
This issue has been found when mtd partition are specified. Autodetection
code should stop when the first invalid char is found.

Here is the example of commands:
setenv mtdids nand0=memory-controller@e000e000
setenv mtdparts "mtdparts=nand0:4m(boot),4m(env),64m(kernel),96m(rootfs)"
mtd list

Before:
Zynq> mtd list
List of MTD devices:
* nand0
  - type: NAND flash
  - block size: 0x20000 bytes
  - min I/O: 0x800 bytes
  - OOB size: 64 bytes
  - OOB available: 16 bytes
  - ECC strength: 1 bits
  - ECC step size: 2048 bytes
  - bitflip threshold: 1 bits
  - 0x000000000000-0x000010000000 : "nand0"
	  - 0x000000000000-0x000000400000 : "boot"
	  - 0x000000400000-0x000000800000 : "env"
	  - 0x000000800000-0x000006c00000 : "kernel"
	  - 0x000006c00000-0x000010000000 : "rootfs"

Where it is visible that kernel partition has 100m instead of 64m

After:
Zynq> mtd list
* nand0
  - type: NAND flash
  - block size: 0x20000 bytes
  - min I/O: 0x800 bytes
  - OOB size: 64 bytes
  - OOB available: 16 bytes
  - ECC strength: 1 bits
  - ECC step size: 2048 bytes
  - bitflip threshold: 1 bits
  - 0x000000000000-0x000010000000 : "nand0"
	  - 0x000000000000-0x000000400000 : "boot"
	  - 0x000000400000-0x000000800000 : "env"
	  - 0x000000800000-0x000004800000 : "kernel"
	  - 0x000004800000-0x00000a800000 : "rootfs"

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Fixes: 0486497e2b ("lib: Improve _parse_integer_fixup_radix base 16 detection")
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Pali Rohár <pali@kernel.org>
2020-04-24 16:40:09 -04:00
Baruch Siach
593f3976be mtd: nand: pxa3xx: fix raw read when last_chunk_size == 0
Commit 6293b0361d ("mtd: nand: pxa3xx: add raw read support") added the
local data_len variable in handle_data_pio() to track read size, but
forgot to update the condition of drain_fifo() call. That happens to
work when the layout last_chunk_size != 0. But when last_chunk_size ==
0, drain_fifo() is not called to read the last chunk, which leads to
"Wait timeout!!!" error. Fix this.

Fixes: 6293b0361d ("mtd: nand: pxa3xx: add raw read support")
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-04-24 15:17:14 -04:00