Commit graph

1031 commits

Author SHA1 Message Date
Stefan Roese
ff7e4f030b mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file
This patch adds the base dtsi file for the Octeon 3 cn73xx SoC.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00
Aaron Williams
0dc4ab9c43 mips: octeon: Initial minimal support for the Marvell Octeon SoC
This patch adds very basic support for the Octeon III SoCs. Only
CFI parallel NOR flash and UART is supported for now.

Please note that the basic Octeon port does not include the DDR3/4
initialization yet. This will be added in some follow-up patches
later. To still use U-Boot on with this port, the L2 cache (4MiB on
Octeon III CN73xx) is used as RAM. This way, U-Boot can boot to the
prompt on such boards.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00
Arthur Li
7f5ea25062 i2c: i2c-cortina: added CAxxxx I2C support
Add I2C controller support for Cortina Access CAxxxx SoCs

Signed-off-by: Arthur Li <arthur.li@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Heiko Schocher <hs@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>

hs: fixed build error, add include log.h
2020-07-09 06:02:44 +02:00
Tom Rini
621e09cb3b Pull request for UEFI sub-system for efi-2020-10-rc1
This series comprises error corrections for the UEFI subsystem:
 
 * correct consideration of timestamps for variable authentication
 * correct collection of data regions for code authentication
 * correct unit tests to test loading dbx
 * enable FAT_WRITE as required by the UEFI spec
 
 The boot manager uses log functions instead of printf() and debug().
 
 The UEFI intialization state is exported.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl8AQD4ACgkQxIHbvCwF
 GsQqpxAAlt+EmomF8I5oUFZ7RwX3XTBXOU2oWlYt2DbkemZvroiGnWu6MC52K/RD
 sDdJwvIo+5NuzDbGlPqKB/NjhJ4eF2W+vOIKSey8+iCXhTovmCiqc7DzxUm0Ansi
 J0A/fwr3jdqUC1dl4C+ytwxPHQC01kK++8Ln5OptqbM1/DskpF0bspdr2fZG02Gc
 ndOPw0WEJYEdNH18rQaW+7fOADXgJzK1VIwMIhqQszGrOO/M7mbyXZDpHG787iOH
 smz41YL/2n4ExGsU4hdIQNWDmSJuEIWgB0PEeSiLE29O2m5G8eNfsAmHjRrV9U9p
 QEbaREQDxXB1BmlYNr/A2497p5pPfjJGhiPVjuN9vRXCMhbGyh937iOkT0c1TAuu
 aJyD5pqPxuGMUjNzO5foINMT97DuqewHoEf/DTmp4AtVzBZC+NzTiO79J94PQc6+
 xIDomTIM1WWtPlcMyvZfwUrlX33Gh3yOGBTwnXqS/YSzIQ1mqxoE6rFOZihUYRfz
 Rh6vUP8csOEhfm0XXDhwAVTudA53cQbBUOgPLPbS6zxhnvJNWN04zHXatg9unBnw
 mH8E30dBote0Make8Kzv53j/ytFL06AA/jgnvDbEOmE4SP7aYGL+oYxryjIPudz8
 mngRE2x2zlppXknTrYdnOAjlULxxOA88u0XiNi3uIuVJGtEbrfA=
 =wwI2
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-10-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi into next

Pull request for UEFI sub-system for efi-2020-10-rc1

This series comprises error corrections for the UEFI subsystem:

* correct consideration of timestamps for variable authentication
* correct collection of data regions for code authentication
* correct unit tests to test loading dbx
* enable FAT_WRITE as required by the UEFI spec

The boot manager uses log functions instead of printf() and debug().

The UEFI intialization state is exported.
2020-07-05 18:13:12 -04:00
Heinrich Schuchardt
ae54b946ca test: provide tests for efi_image_region_add()
Provide unit tests for efi_image_region_add().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-03 18:03:41 +02:00
Sean Anderson
f9c7d4f99f clk: Add K210 clock support
Due to the large number of clocks, I decided to use the CCF. The overall
structure is modeled after the imx code. Clocks parameters are stored in
several arrays, and are then instantiated at run-time. There are some
translation macros (FOOIFY()) which allow for more dense packing.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
CC: Lukasz Majewski <lukma@denx.de>
2020-07-01 15:01:21 +08:00
Tom Rini
f0e236c8d6 Xilinx changes for v2020.10
Versal:
 - xspi bootmode fix
 - Removing one clock from clk driver
 - Align u-boot memory setting with OS by default
 - Map TCM and OCM by default
 
 ZynqMP:
 - Minor DT improvements
 - Reduce console buffer for mini configurations
 - Add fix for AMS
 - Add support for XDP platform
 
 Zynq:
 - Support for AES engine
 - Enable bigger memory test by default
 - Extend documentation for SD preparation
 - Use different freq for Topic miami board
 
 mmc:
 - minor GD pointer removal
 
 net:
 - Support fixed-link cases by zynq gem
 - Fix phy looking loop in axi enet driver
 
 spi:
 - Cleanup global macros for xilinx spi drivers
 
 firmware:
 - Add support for pmufw reloading
 
 fpga:
 - Improve error status reporting
 
 common:
 - Remove 4kB addition space for FDT allocation
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXvScEQAKCRDKSWXLKUoM
 IeHUAJ9Z1shAlbILuHZKEpqQySLHdUVgBQCff8Nf+wi1rByTrwflKt14MtIsdFY=
 =2Yuu
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.10

Versal:
- xspi bootmode fix
- Removing one clock from clk driver
- Align u-boot memory setting with OS by default
- Map TCM and OCM by default

ZynqMP:
- Minor DT improvements
- Reduce console buffer for mini configurations
- Add fix for AMS
- Add support for XDP platform

Zynq:
- Support for AES engine
- Enable bigger memory test by default
- Extend documentation for SD preparation
- Use different freq for Topic miami board

mmc:
- minor GD pointer removal

net:
- Support fixed-link cases by zynq gem
- Fix phy looking loop in axi enet driver

spi:
- Cleanup global macros for xilinx spi drivers

firmware:
- Add support for pmufw reloading

fpga:
- Improve error status reporting

common:
- Remove 4kB addition space for FDT allocation
2020-06-25 09:33:39 -04:00
Tom Rini
5575f79bda Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi into next
- Convert fsl_espi to driver model (Chuanhua)
- Enable am335x baltos to DM_SPI (Jagan)
- Drop few powerpc board which doesn't have DM enabled (Jagan)
2020-06-19 16:25:50 -04:00
Neil Armstrong
9c55f5d112 board: amlogic: add board doc files to MAINTAINERS
Add the recently added reStructuredText board documentation in the
appropriate MAINTAINERS files.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-18 10:24:13 +02:00
Heinrich Schuchardt
c7ff87e0ae doc: random number generation
Add random number generation APIs to the HTML documentation.
Fix style issues.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-14 21:07:20 +02:00
Heinrich Schuchardt
a7813918fe doc: move README.log to HTML documentation
Convert README.log to reStructuredText and add it to the generated HTML
documentation.

Assign doc/develop/logging.rst to the maintainer of LOGGING.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11 20:52:11 -06:00
Tom Rini
1e374089bd cubieboard7: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

While in here, add the doc file to the MAINTAINERS entry.

Cc: Amit Singh Tomar <amittomer25@gmail.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-06-02 17:27:04 -04:00
Tom Rini
ee67ec98c8 m68k: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

While in here, add the doc file to the MAINTAINERS entry for coldfire.

Cc: Huan Wang <alison.wang@nxp.com>
Cc: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-02 17:27:04 -04:00
Heinrich Schuchardt
f4c1f705aa MAINTAINERS: add dfu.h and dfu.rst to DFU
include/dfu.h and doc/api/dfu.rst belong to the device firmware update
sub-system. So let's add them to DFU in MAINTAINERS.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
51028db1ca MAINTAINERS: add doc/driver-model/ to DRIVER MODEL
The documentation should rest with the same maintainer as the code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25 11:54:53 -04:00
Ilias Apalodimas
e4acbe4e34 MAINTAINERS: Add maintainer for EFI variables via OP-TEE
Add myself as maintainer for the OP-TEE related UEFI variable storage.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17 21:59:53 +02:00
Christophe Leroy
3b84809b7b MAINTAINERS: POWERPC MPC8XX: Update email address
Our email addresses have changed from @c-s.fr to @csgroup.eu

Update entry in MAINTAINERS

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2020-05-15 14:47:35 -04:00
Chunfeng Yun
c01a7773a5 MAINTAINERS: MediaTek: add USB related files
Add dt-binding files of xhci-mtk and phys, C files of
phys.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Heinrich Schuchardt
661c02ceb2 MAINTAINERS: assign test/py/tests/test_efi*/ to EFI PAYLOAD
Some UEFI related files are not assigned currently. Add them to the
EFI PAYLOAD area.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30 10:25:07 +02:00
Amit Singh Tomar
dd786d4c4c MAINTAINERS: add entry for cubieboard7 config
This commit adds entry for cubieboard7 config under Actions Semi
OWL family.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
b1a6bb3b59 arm: actions: Add common framework for Actions Owl Semi SoCs
This commit adds common arch support for Actions Semi Owl
series SoCs and removes the Bubblegum96 board files.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Tom Rini
62c59545ba Merge tag 'ti-v2020.07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Fix boot on am335x guardian board
- Increase OPSI speed on AM65x and J721E devices
- Use JTAD register for identifying K3 devices.
- Update TI entry in MAINTAINERS file.
2020-04-20 11:14:22 -04:00
Heinrich Schuchardt
395041b2fd test: log functions with CONFIG_LOG=n
If CONFIG_LOG=n, we still expect output for log_err(), log_warning(),
log_notice(), log_info() and in case of DEBUG=1 also for log_debug().

Provide unit tests verifying this.

The tests depend on:

	CONFIG_CONSOLE_RECORD=y
	CONFIG_LOG=n
	CONFIG_UT_LOG=y

It may be necessary to increase the value of CONFIG_SYS_MALLOC_F_LEN to
accommodate CONFIG_CONSOLE_RECORD=y.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
Heinrich Schuchardt
befadde0a2 log: syslog driver
Provide a log driver that broadcasts RFC 3164 messages to syslog servers.
rsyslog is one implementation of such a server.

The messages are sent to the local broadcast address 255.255.255.255 on
port 514.

The environment variable log_hostname can be used to provide the HOSTNAME
field for the messages. The optional TIMESTAMP field of RFC 3164 is not
provided.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
Lokesh Vutla
16c2a979fc MAINTAINERS: update entry for ARM TI
Add all TI specific drivers, include, arch files under ARM TI entry.
Driver files are added only if there is no entry for the specific
subsystem in MAINTAINERS file.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-04-14 15:44:48 +05:30
Ashok Reddy Soma
5028358a6a watchdog: versal: Add support for Xilinx window watchdog
Add support for Xilinx window watchdog, which can be found on
Versal platforms.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-06 12:52:45 +02:00
Marek Behún
3e29bd268d MAINTAINERS: add myself as maintainer of fs/btrfs
Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-03-27 15:42:04 -04:00
Marek Vasut
cb11eed23d MAINTAINERS: Add usb.h entry to usb
Add usb.h file into the USB list.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
2020-03-27 15:42:04 -04:00
Patrice Chotard
d21ffa2a2e MAINTAINERS: update entry for ARM STI
Add STi drivers/include files and git tree.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-13 09:30:30 -04:00
Arthur Li
d55e4e74ce mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs
Initial DesignWare based DM support for Cortina Access CAxxxx SoCs.

Signed-off-by: Arthur Li <arthur.li@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-03-09 08:33:13 +08:00
Patrick Delaunay
efa667d38b doc: add board documentation for stm32mp1
Change plain test README to rst format and move this file
in documentation directory.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-02 09:41:32 +01:00
Heinrich Schuchardt
080cc0b1b3 MAINTAINERS: set maintainer for doc/api/efi.rst
doc/api/efi.rst belongs to the UEFI sub-system documentation.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-25 11:39:54 -05:00
Alex Nemirovsky
800775eb49 MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc.
Assign Alex Nemirovsky as custodian for all
Cortina Access (CA) for ARM and MIPS based SoCs.

Currently Cortina Access CAxxxx family of SoCs support both
ARM and MIPS ISA.  Drivers have cross platform support for
both architectures.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07 13:59:58 -05:00
Sam Protsenko
586a1bf5b2 doc: android: Convert to Sphinx format
Convert Android documentation from regular txt format to Sphinx (RST).
Also add Android index.rst file and reference it in root index.rst, so
that Android documentation is visible.

Test:

    $ make htmldocs
    $ xdg-open doc/output/index.html

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Sughosh Ganu
3e63598308 MAINTAINERS: Add entry for rng drivers
Take up maintainership of random number generator drivers with
Heinrich Schuchardt as the reviewer.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-23 07:29:58 -05:00
Stephan Gerhold
293f9ebb94 MAINTAINERS: Add ARM U8500
Add myself as maintainer for ST-Ericsson U8500 SoC to MAINTAINERS.
Linus Walleij usually reviews all Ux500 related patches,
so add him as a reviewer.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-22 17:47:57 -05:00
Lokesh Vutla
713a02a2ce MAINTAINERS: Update ARM TI entry
Take over TI maintainership from Tom.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:29 +05:30
Andrew F. Davis
9bc97792d8 configs: Add configs for J721e High Security EVM
Add new defconfig files for the J721e High Security EVM.

These defconfigs are the same as for the non-secure part, except for:
    CONFIG_TI_SECURE_DEVICE option set to 'y'
    CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
    CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y'
    CONFIG_BOOTCOMMAND uses FIT images for booting

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Sam Protsenko
0c0859cf2d MAINTAINERS: Fix mail
Sam doesn't work for Linaro anymore, so Linaro mail is not valid. Change
it to his home mail instead.

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
2020-01-16 09:39:45 -05:00
Heinrich Schuchardt
5c7fa84f4b MAINTAINERS: assign usb.c and and usb_kbd.c
Marek is already maintaining USB. Assign files common/usb.c and
common/usb_kbd.c to him.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-21 20:35:16 +01:00
Matthias Brugger
78b7aa455a MAINTAINERS: Add info for bcm283x
The bcm283x has grown in files, which was not reflected in the
MAINTAINERS file. Fix this by adding the missing entries.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-12-03 08:43:24 -05:00
Joe Hershberger
2800540d10 Update MAINTAINERS to include environment files
To be maintained by me (Joe) and reviewed by Wolfgang Denk when
available.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2019-11-21 08:36:40 -05:00
liu hao
e3aafef4cf arm: add initial support for the Phytium Durian Board
This adds platform code and the device tree for the Phytium Durian Board.
The initial support comprises the UART and the PCIE.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-07 18:01:13 -05:00
Heiko Schocher
b61cbbdcab pci: add DM based mpc85xx driver
add DM based PCI Configuration space access support for
MPC85xx PCI Bridge. This driver is based on
arch/powerpc/cpu/mpc85xx/pci.c

In the old driver there is a fix for a hw issue on the
TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I
have no such hardware I did not port this part.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Eugeniy Paltsev
0563535990 MAINTAINERS: add info about ARC HSDK reset driver
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-11-01 16:45:40 +03:00
Tom Rini
271103ac0b Merge branch 'master' of git://git.denx.de/u-boot-usb
- DWC3 improvements
- i.MX7 EHCI bugfix
2019-10-25 13:50:51 -04:00
Tom Rini
c9e50bb12a Second set of u-boot-atmel features and fixes for 2020.01 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdspnqAAoJEB6zHgIOrC/Ixi4IAJEEiCZPu6Z3fbkFX/Um7vCX
 eMTltJN8nz4oiSi3xdx3ejueqWdW3F8VuCkHb0j0bVAhMlUlVgwCzfd0cD+D2iwS
 jkrgzASNAr+JeYKYEdWqqfaUxOCd2qfuBu9EXlpvKQLWLt+KRfsOsHWcgR4bf095
 aGCihvd/fKhKYUvbf5cEQnsWa3UwtsKk4Web5MKjxXx3p0iVNlu4KLd/vDWfTios
 X1NqiO5ZjXNrDxyG6Aj8lgDXlE5kfeKaN/aCJU1/0U2cXm8JRu2w2dv1P/e/kU+j
 NHIGzICAG4Lk/4gQTeuohJxLyvj7K3i1H12ik9Qeh4H1/5fsyybyltGUo7H443s=
 =JYe3
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2020.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

Second set of u-boot-atmel features and fixes for 2020.01 cycle

This feature set includes Eugen's work on a new tiny flexcom driver and
eeprom mac retrieval for the sam9x60-ek board.
2019-10-25 13:50:33 -04:00
Eugen Hristev
4c49753ce2 MAINTAINERS: add MICROCHIP_FLEXCOM to at91
Add microchip flexcom driver to at91.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-24 13:02:01 +03:00
Jean-Jacques Hiblot
1708a12377 usb: xhci: move xhci.h to include usb
The xhci.h header file is currently located under drivers/usb/xhci
Move it to the include/usb folder to make it available to drivers that
are not under drivers/usb/xhci

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Faiz Abbas
7feafb0ae4 ufs: Add Initial Support for UFS subsystem
Add Support for UFS Host Controller Interface (UFSHCI) for communicating
with Universal Flash Storage (UFS) devices. The steps to initialize the
host controller interface are the following:

- Initiate the Host Controller Initialization process by writing to the
Host controller enable register.
- Configure the Host Controller base address registers by allocating a
host memory space and related data structures.
- Unipro link startup procedure
- Check for connected device
- Configure UFS host controller to process requests

Also register this host controller as a SCSI host controller.

Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to
U-boot.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-23 20:47:12 -04:00