Commit graph

11 commits

Author SHA1 Message Date
Kumar Gala
25bacf7a2b ppc/85xx: Fix enabling of L2 cache
We need to flash invalidate the locks in addition to the cache
before we enable.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24 12:05:27 -05:00
Kumar Gala
26f4cdba6b 85xx: Add support for setting IVORs to fixed offset defaults
In future Book-E implementations IVORs will most likely go away and be
replaced with fixed offsets.  The IVPR will continue to exist to allow
for relocation of the interrupt vectors.

This code adds support to setup the IVORs as their fixed offset values
per the ISA 2.06 spec when we transition from u-boot to another OS
either via 'bootm' or a cpu release.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-08 09:10:05 -05:00
Poonam Aggrwal
0e870980a6 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
The number of CPUs are getting detected dynamically by checking the
processor SVR value.  Also removed CONFIG_NUM_CPUS references from all
the platforms with 85xx/86xx processors.

This can help to use the same u-boot image across the platforms.

Also revamped and corrected few Freescale Copyright messages.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Kumar Gala
1b3e4044a2 85xx: Add support for additional e500mc features
* Enable backside L2
* e500mc no longer has timebase enable in HID (moved to CCSR register)

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-30 13:33:50 -05:00
Haiying Wang
181a365011 Set IVPR to kenrel entry point in second core boot page
Assuming the OSes exception vectors start from the base of kernel address, and
the kernel physical starting address can be relocated to an non-zero address.
This patch enables the second core to have a valid IVPR for debugger before
kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid
value for second core which runs kernel at different physical address other
than 0x0.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-12-19 18:32:41 -06:00
Kumar Gala
0f060c3bf8 85xx: Add basic e500mc core support
Introduce CONFIG_E500MC to deal with the minor differences between
e500v2 and e500mc.

* Certain fields of HID0/1 don't exist anymore on e500mc
* Cache line size is 64-bytes on e500mc
* reset value of PIR is different

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-24 15:10:47 -05:00
Kumar Gala
e0ff3d350d 85xx: Ensure timebase is zero on secondary cores
The e500um says the timebase is volatile out of reset.  To ensure
TB sync works we need to make sure its zero.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-09 16:52:45 -05:00
Kumar Gala
902ca09246 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
Use CONFIG_NUM_CPUS to match existing define used by 86xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
2008-08-12 00:09:29 +02:00
Kumar Gala
cf6cc01427 85xx: Additional fixes and cleanup of MP code
* adjust __spin_table alignment to match ePAPR v0.94 spec
* loop over all cpus when determing who is up.  This fixes an issue if
  the "boot cpu" isn't core0.  The "boot cpu" will already be in the
  cpu_up_mask so there is no harm
* Added some protection in the code to ensure proper behavior.  These
  changes are explicitly needed but don't hurt:
  - Added eieio to ensure the "hot word" of the table is written after
    all other table updates have occurred.
  - Added isync to ensure we don't prefetch loading of table entries
    until we a released

These issues we raised by Dave Liu.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29 09:42:19 -05:00
Kumar Gala
79679d8002 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
The following changes are needed to be inline with ePAPR v0.81:

* r4, r5 and now always set to 0 on boot release
* r7 is used to pass the size of the initial map area (IMA)
* EPAPR_MAGIC value changed for book-e processors
* changes in the spin table layout
* spin table supports a 64-bit physical release address

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:04 -05:00
Kumar Gala
ec2b74ffd3 85xx: Added support for multicore boot mechanism
Added the cpu command that provides a generic mechanism to get status,
reset, and release secondary cores in multicore processors.

Added support for using the ePAPR defined spin-table mechanism on 85xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:03 -05:00