Commit graph

21 commits

Author SHA1 Message Date
Simon Glass
747c4c68c0 stm32: Correct positioning of declaration
The current code gives a warning:

arch/arm/mach-stm32/stm32f7/soc.c: In function 'arch_cpu_init':
arch/arm/mach-stm32/stm32f7/soc.c:38:2: error: 'for' loop initial
    declarations are only allowed in C99 or C11 mode
  for (int i = 0; i < ARRAY_SIZE(stm32_region_config); i++)
  ^
arch/arm/mach-stm32/stm32f7/soc.c:38:2: note: use option -std=c99,
    -std=gnu99, -std=c11 or -std=gnu11 to compile your code

Fix it by moving the declaration to the top of the function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Series-cc trini
2017-07-06 16:17:17 -04:00
Vikas Manocha
1a73bd842e spl: stm32f7: configure for xip booting
With xip booting configuration, we don't need to copy the next image
(U-Boot or linux xipimage) from flash to sdram area.

Flash memory organization is like this:
	spl-U-Boot:	u-boot-spl.bin 	: 0x0800_0000
	U-Boot :	u-boot-dtb.bin	: 0x0800_8000
	linux :		xipImage	: 0x0800_8000

It is also possible to have U-Boot binary & linux binaries configured at
different addresses of flash memory like U-Boot at 0x0800_8000 & linux
xipImage at 0x0800_4000. But in any case, spl-U-Boot needs to be compiled for
U-Boot as next binary with SPL_OS_BOOT option disabled.
By default, spl is configured to boot linux xipImage.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09 11:24:00 -04:00
Vikas Manocha
55a3ef714f spl: stm32f7: add kernel boot support
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09 11:24:00 -04:00
Vikas Manocha
b97476965b stm32: stm32f7: add spl build support
This commit supports booting from stm32 internal nor flash. spl U-Boot
initializes the sdram memory, copies next image (e.g. standard U-Boot)
to sdram & then jumps to entry point.

Here are the flash memory addresses for U-Boot-spl & standard U-Boot:
	- spl U-Boot		: 0x0800_0000
	- standard U-Boot	: 0x0800_8000

To compile u-boot without spl: Remove SUPPORT_SPL configuration
(arch/arm/mach-stm32/Kconfig)

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
[trini: Rework Kconfig logic a bit]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09 11:23:55 -04:00
Vikas Manocha
624b7101ee stm32f7: configure mpu valid for f7 family
This configuration should be valid for all F7 family devices in general.
Here is the regions info:

	- Region0 : 4GB	  : cacheable & executable.
	- Region1 : 512MB : text area	: strogly ordered & executable.
	- Region2 : 512MB : peripherals : device memory & non-executable.
	- Region3 : 512MB : peripherals : device memory & non-executable.
	- Region4 : 512MB : cortexM area: strongly ordered & non-executable.

Higher region number overrides the lower region configuration.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-12 08:37:08 -04:00
Vikas Manocha
33b78476d2 stm32: use armv7m MPU configuration support
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-12 08:37:07 -04:00
Vikas Manocha
dc11d83a2e stm32f7: enable instruction & data cache
It also enables commands for cache enable/disable/status.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-04-08 09:26:51 -04:00
Vikas Manocha
712f99a5dd clk: stm32f7: add clock driver for stm32f7 family
add basic clock driver support for stm32f7 to enable clocks required by
the peripherals.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-17 14:15:12 -04:00
Michael Kurz
d4363baada ARM: SPI: stm32: add stm32f746 qspi driver
This patch adds support for the QSPI IP found in stm32f7 devices.

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
2017-01-28 14:04:50 -05:00
Michael Kurz
b20b70fcc0 net: stm32: add designware mac glue code for stm32
This patch adds glue code required for enabling the designware
mac on stm32f7 devices.

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-28 14:04:47 -05:00
Michael Kurz
081de09d49 ARM: stm32: use clock setup function defined in clock.c
Use the clock setup function defined in clock.c instead of setting the
clock bits directly in the drivers.
Remove register definitions of RCC in rcc.h as these are already
defined in the struct in stm32.h

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-01-28 14:04:45 -05:00
Michael Kurz
bad5188be2 ARM: stm32: cleanup stm32f7 files
Cleanup stm32f7 files:
- use BIT macro
- use GENMASK macro
- use rcc struct instead of macro additions

Add missing stm32f7 register in rcc struct

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by: Vikas MANOCHA<vikas.manocha@st.com>
2017-01-28 14:04:43 -05:00
Tom Rini
95d5273303 Revert "stm32: Change USART port to USART6 for stm32f746 discovery board"
Per Vikas' request, the problem this commit is supposed to be solving is
something he doesn't see and further this introduces additional hardware
requirements.

This reverts commit 4b2fd720a7.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-21 15:38:13 -04:00
Toshifumi NISHINAGA
4b2fd720a7 stm32: Change USART port to USART6 for stm32f746 discovery board
This change is to remove a halt at about 200KiB
while sending a large(1MiB) binary to a micro controller using USART1.
USART1 is connected to a PC via an on-board ST-Link debugger
that also functions as a USB-Serial converter.
However, it seems to loss some data occasionally.
So I changed the serial port to USART6 and connected it to the PC using
an FTDI USB-Serial cable, therefore the transmission was successfully
completed.

Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14 18:22:44 -04:00
Toshifumi NISHINAGA
25c1b1353c stm32: Add SDRAM support for stm32f746 discovery board
This patch adds SDRAM support for stm32f746 discovery board.
This patch depends on previous patch.
This patch is based on STM32F4 and emcraft's[1].

[1]:  https://github.com/EmcraftSystems/u-boot

Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14 18:22:43 -04:00
Toshifumi NISHINAGA
ba0a3c16e0 stm32: clk: Add 200MHz clock configuration for stm32f746 discovery board
This patch adds 200MHz clock configuration for stm32f746 discovery board.
This patch is based on STM32F4 and emcraft's[1].

[1]:  https://github.com/EmcraftSystems/u-boot

Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14 18:22:41 -04:00
Vikas Manocha
9ecb0c416c stm32: stm32f4: move flash driver to mtd driver location
Same flash driver can be used by other stm32 families like stm32f7.
Better place for this driver would be mtd driver location.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-03-26 18:49:28 -04:00
Vikas Manocha
e66c49fa93 stm32: add support for stm32f7 & stm32f746 discovery board
This patch adds support for stm32f7 family & stm32f746 board.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24 18:43:57 -05:00
Vikas Manocha
14cec06113 gpio: stm32_gpio: move clock config from driver to board
This patch removes the gpio clock enable from gpio driver & move it in the
board code, making it possible to use the gpio driver with other socs.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24 18:42:49 -05:00
Vikas Manocha
dffceb4b15 serial: serial_stm32: move clock config from driver to board
This patch removes the uart clock enable from serial driver & move it in the
board code.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08 10:10:36 -05:00
Vikas Manocha
0a61ee880c stm32: move stm32 specific code to mach-stm32
This patch moves stm32 sources at one place, with this armv7m now contains
only generic stuff.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-01-20 10:19:41 -05:00