Commit graph

2583 commits

Author SHA1 Message Date
Nicolas Ferre
885554360d ARM: dts: at91: sam9x60: Add macb0 Ethernet controller
Add Ethernet controller to dtsi file and enable it on sam9x60ek
platform connected with rmii.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-10-08 09:16:11 +03:00
Sandeep Sheriker Mallikarjun
f99e0ad25a ARM: dts: Add dts files for sam9x60ek
add device tree files for sam9x60ek board with below changes.

- Add initial device nodes (pmc, pinctrl, sdhc, dbgu & pit)
- Add the reg property for the pinctrl node.
- Add the "u-boot,dm-pre-reloc" property to determine which nodes
  are used by the board_init_f stage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
[prasanthi.chellakumar@microchip.com: fix style/whitespace issues]
Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com>
[nicolas.ferre@microchip.com:
- fix gclk,
- fix pio/pinctrl controller definition and allow to have more
  than only PIOA for this SoC,
- removing pinctrl address]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[claudiu.beznea@microchip.com:
- use SAM9X60's compatible for pinctrl
- add drive strength and slew rate options for SDMMC0 pins.]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[tudor.ambarus@microchip.com:
- u-boot,dm-pre-reloc property in dedicated file,
- fix pit len, starts from 0xFFFFFE40 and it is of len 0x10]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
4a500e4337 ARM: dts: at91: sama5d27_wlsom1: add hlcdc node
Add node for hlcld for u-boot logo display at boot.
This is compatible with the Precision Design Associates (PDA) TM5000 screen.
Timings are compatible with simple panel from Linux, panel name is
pda_91_00156_a0

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
06e0da70ca ARM: dts: at91: sama5d27_wlsom1_ek: add support for qspi
Add node for qspi1 memory connected on the wlsom

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
58581058f9 ARM: dts: at91: sama5d2: add seq for qspi1
qspi1 does not have an alias/seq number. This is required for
SPL default SF bus booting for the boards that have this SoC

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Nicolas Ferre
44b5c40be3 board: atmel: add sama5d27_wlsom1_ek board
Add support for the SAMA5D27-WLSOM1-EK. It's based on the Microchip
WireLess SoM which contains the SAMa5D27 LPDDR2 2Gbits SiP.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[eugen.hristev@microchip.com]: added u-boot specific dtsi and ported to 2019.10
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Tom Rini
dac51e9aaf Merge branch 'master' of git://git.denx.de/u-boot-sh
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
2019-10-05 20:06:58 -04:00
Adam Ford
5ff1963da3 ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and
usdhc2.  This creates the missing imx6q-logicpd-u-boot.dtsi file
which will enable these functions so SPL can properly setup UART, detect
microSD card, and startup.

Fixes: 8f4691e31a ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled,
remove MMC init")

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-10-04 12:21:23 -04:00
Marek Vasut
49d5fba81c ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
This patch restores commit c49d0ac38a ("ARM: dts: rmobile: Increase off-on
delay on the SD Vcc regulator"), which was accidentally dropped during DT
resync in commit 317d13ac63 ("ARM: dts: rmobile: Synchronize Gen3 DTs with
Linux 5.0").

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Fixes: 317d13ac63 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0")
2019-09-30 02:07:02 +02:00
Michael Trimarchi
f810ea6acb rockchip: rk3288-tinker: Attach missing peripherals at SPL
Tinker board needs to mux all the sdmmc gpio and
activate the regulator connected to bank 7. Remove
all the bank that are not in use and mark them as dm,spl
so-that it would initialize at SPL.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Tom Rini
a9fa70b7b7 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add emmc hs200 support
- Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-16 13:13:45 -04:00
Faiz Abbas
16f14b930d ARM: dts: dra74x: Fix iodelay configuration for mmc3
According to the latest am572x[1] and dra74x[2] data manuals, mmc3
default, hs, sdr12 and sdr25 modes use iodelay values given in
MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is
selected and correct iodelay values are configured.

[1] http://www.ti.com/lit/ds/symlink/am5728.pdf
[2] http://www.ti.com/lit/ds/symlink/dra746.pdf

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-09-13 11:56:30 -04:00
Suniel Mahesh
d60eb8e49e arm: am437x: cm-t43: Add device tree, enable OF_CONTROL
Add device tree from Linux for driver model conversion
and enable OF_CONTROL. This will remove the following compile
warning:
==================================================
Device Tree Source is not correctly specified.
Please define 'CONFIG_DEFAULT_DEVICE_TREE'
or build with 'DEVICE_TREE=<device_tree>' argument
===================================================
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-09-13 11:56:08 -04:00
Alex Marginean
a3ce94b602 arm: dts: ls1028a-qds: define the MDIO MUX
Add the device-tree structure describing the MUX in board dts.

QDS board has an on-board RGMII PHY and 4 slots for extension cards.
All these can be accessed over MDIO through a MDIO MUX controlled
over I2C.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:31 +05:30
Yinbo Zhu
23da111d5f dts: armv8: add emmc hs200 support for ls1028ardb
Add emmc hs200 support for ls1028ardb

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:04:43 +05:30
Yinbo Zhu
0f021c8bde dts: armv8: add emmc hs200 support for lx2160ardb
Add emmc hs200 support for lx2160ardb

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:04:09 +05:30
Yinbo Zhu
be852314dc dts: armv8: add emmc hs200 support for ls1012ardb
Add emmc hs200 support for ls1012ardb

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:03:10 +05:30
Kever Yang
86b4a6db68 rockchip: rk3399: dts: add boot order for rockpro64
The rk3399 rockpro64 board can boot from emmc and sdcard.
TODO: add spiflash as boot device.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Tom Rini
40e362a9ab Merge tag 'mmc-9-6-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
Bug fixes to mmc_spi
Add Aspeed SD driver
Fix dw_mmc timeout calculation
Fix timeout values passed to mmc_wait_dat0
sdhci dt caps/mask update

[trini: Fix evb-ast2500_defconfig CONFIG_MMC line]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-08 21:15:13 -04:00
Eddie James
30231e0ddb ARM: dts: ast2500: Add SDHCI nodes
Add nodes for the Aspeed SD controllers with their necessary properties.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
2019-09-05 15:27:31 +08:00
Alex Marginean
7660d5c120 arm: dts: Set custom names for cp110 master/slave MDIO buses
Implicitly Marvell MDIO driver uses DT node names for devices, but in this
case that is not unique.  Set MDIO device names for master/slave to
cpm/cps.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Tom Rini
d22c8be964 Merge branch 'master' of git://git.denx.de/u-boot-sh
- r8a66597 usb changes
2019-09-01 13:33:12 -04:00
Patrick Delaunay
5d2901a4b6 stm32mp1: Add remoteproc support for m4 coprocessor
Alignment with kernel patch proposal for binding:

[PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c
https://lkml.org/lkml/2019/5/14/159

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
5e959ab85e stm32mp1: board: Update the way vdd-supply is retrieved from DT
Due to kernel DT alignment, pwr-supply is renamed to vdd-supply
and is a subnode of pwr-regulators.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
dd2810851e stm32mp1: board: support of error led on ed1/ev1 board
Create a function led_error_blink and add node in device
tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
d573e46168 stm32mp1: board: enable v1v2_hdmi and v3v3_hdmi regulator on dk2 boot
As for Audio codec IC, HDMI IC is not "IO safe".
HDMI regulators (v3v3 and v1v2) must be enabled to allow
I2C1 bus usage. HDMI IC must be under reset during power up
and keep HDMI and AUDIO devices in reset while they are not
used in U-Boot to keep them in low power mode
(each device can be kept in reset independently keeping their
power supplies ON until kernel).

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
7acda7eae5 ARM: dts: stm32mp1: add pull-up on serial rx of console connected to STLINK
Avoid U-Boot auto-boot interruption for line break detection
on console when the RX line connected to STLINK is floating
(-IO error in getc cause by framing error and testc return 1)
Same workaround is applied on all the STMicroelectonics board.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
9c2214b489 ARM: dts: stm32mp1: add key support on DK1/DK2
Allow to use PA13 and PA14 to force fastboot mode or STM32CubeProgrammer
mode.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
2c2580984a ARM: dts: stm32mp1: add ldtc pre-reloc proper in SOC file
The pre-relocation probe is needed to reserve video frame buffer
in video_reserve() for all the board;
LDTC must be tagged prereloc in SOC U-Boot dtsi file.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
67b7684f8c ARM: dts: stm32mp1: Add PSCI node access before relocation
Add node in DT and avoid error to search UCLASS_SYSRESET in
board_f.c::print_resetinfo() and lost 1.6s in U-Boot
for the trusted boot chain.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
6d923007d6 ARM: dts: stm32mp1: Add iwdg2 support for SPL
This patch adds independent watchdog support for stm32mp157c
in SPL.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
be16c41f85 ARM: dts: stm32mp1: DDR config v1.45
Update DDR configuration with the latest update:
- Change DQSGE to 1 for DDR3, to cure missing DQS preamble.

Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
fe91533644 ARM: dts: stm32mp1: sync device tree with v5.3-rc2
Synchronize device tree with v5.3-rc2 label and
update the associated u-boot dtsi.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrice Chotard
0203050e57 ARM: dts: stih410-b2260: Sync DT with kernel v5.2
Synchronize U-boot DT with kernel v5.2 for stih410-b2260.
Update stih410-b2260-u-boot.dtsi accordingly.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-08-27 09:36:56 +02:00
Adam Ford
5adbc0e5ca ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
When the pinmux configuration was added, it was accidentally placed into
the omap3_pmx_wkup node  when it should have been placed into the
omap3_pmx_core.  This error was accidentally propagated to U-Boot by
me when I blindly copied the device tree from Linux.

This patch moves the i2c2_pins and i2c3_pins to the correct node
which should eliminate i2c bus errors and timeouts due to the fact
the bootloader uses the save device tree that no longer properly
assigns these pins.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-26 11:46:20 -04:00
Kever Yang
cb8c492f20 rockchip: rk3288: remove fennec board support
Since there is no one using this board, remove it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 15:27:40 +08:00
Kever Yang
08bbe44424 rockchip: dts: rk3328-rock64: fix usb power supply
According to rock64 schemetic, both VCC_HOST1_5V and VCC_HOST_5V are
controlled by USB20_HOST_DRV(GPIO0A2), fix it so that we can get correct
power supply for USB HOST ports.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 15:27:40 +08:00
Kever Yang
2e91e2025c rockchip: rk3328: migrate u-boot node to -u-boot.dtsi
Move all the nodes only shown in u-boot to -u-boot.dtsi to make
rk3328.dtsi clean.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 15:27:40 +08:00
Kever Yang
8e5c8571fe rockchip: dts: rk3328-rock64: enable usb3 xhci controller
Rock64 has a USB3.0 port, enable the controller so that we can use it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 15:27:40 +08:00
Marek Vasut
be1e9dc080 ARM: renesas: Enable R8A66597 USB host on GR Peach
Enable USB host support on GR Peach board.

To use USB host on GR Peach, it might be necessary to solder JP3 header
onto the board first and then short it. Shorting JP3 is mandatory to let
the U5 regulator to supply VBUS to the CN3 USB port.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:37 +02:00
Chuanhua Han
f3b6a711a4 armv8: dts: ls1088aqds : Add pcf2127 node
Add the pcf2127-rtc node under the i2c0->i2c-mux@77->i2c@3 for ls1088aqds boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
96d3fb4146 armv8: dts: ls1088ardb: Add slave nodes under the i2c0 controller
This patch adds some slave nodes to support the i2c dm on the device
side under the i2c0 controller.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
c2eda95a5b armv8: dts: ls1088a: add I2C node support
One ls1088a, there are four I2C controllers. So add all I2C node
for ls1088a in device tree.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
1703aaff8b armv8: dts: ls2088aqds : Add ds3232 node
Add the ds3232-rtc node under the i2c0->i2c-mux@77->i2c@0 for ls2088aqds
boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
6672ab1628 armv8: dts: ls2088ardb: Add slave nodes under the i2c0
Add some slave nodes to support the i2c dm on the device side under the i2c0.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
chuanhua han
407916f5d7 armv8: dts: fsl-ls2088a: add i2c node support
One ls2088a, there are four I2C controllers. So add I2C nodes in dts
for ls2088a.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
bd9b0745f7 armv8: dts: ls1028aqds: Add pcf2127 node under i2c1
Add the pcf2127-rtc node under the i2c1 in dts for ls1028aqds boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Chuanhua Han
25d9467c16 armv8: dts: ls1028aqds: Add pca9547 node under the i2c0 controller
Add pca9547 node to support i2c multiplexer under the i2c0 controller
in dts for ls1028aqds boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Chuanhua Han
e120d1277d armv8: dts: ls1028ardb: Add slave nodes under the i2c0 controller
Add some slave nodes to support the i2c dm on the device side under the i2c0.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Chuanhua Han
07cb35fb71 armv8: dts: lx2160aqds : Add pcf2127 node
Add the pcf2127-rtc node under the i2c0->i2c-mux@77->i2c@3 in dts for
lx2160aqds boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30