Commit graph

47 commits

Author SHA1 Message Date
Kumar Gala
89188a6233 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
We have always mapped at least 16M in the kernel and we have seen cases
with new kernel features that a kernel image needs more than 8M of
memory.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-21 09:02:40 -05:00
Kumar Gala
b0fe93eda6 85xx: Use common LSDMR defines from asm/fsl_lbc.h
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-30 13:33:49 -05:00
Kumar Gala
aca5f018a8 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
Introduce a new define to seperate out the virtual address that PCI
IO space is at from the physical address.  In most situations these are
mapped 1:1.  However any code accessing the bus should use VIRT.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
2009-01-23 17:03:13 -06:00
Kumar Gala
5af0fdd81c 85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards
Introduce a new define to seperate out the virtual address that PCI
memory is at from the physical address.  In most situations these are
mapped 1:1.  However any code accessing the bus should use VIRT.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
2009-01-23 17:03:13 -06:00
Kumar Gala
5f91ef6acd 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards
Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead
of _IO_BASE so we are more explicit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-23 17:03:13 -06:00
Kumar Gala
10795f42cb 85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boards
Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead
of _MEM_BASE so we are more explicit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
2009-01-23 17:03:13 -06:00
Peter Tyser
ba490b7761 Remove unused CONFIG_ADDR_STREAMING defines
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-14 12:42:42 +01:00
Jon Loeliger
801a194616 Removed unused CONFIG_L1_INIT_RAM symbol.
Prevent further viral propogation of the unused
symbol CONFIG_L1_INIT_RAM by just removing it.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-12-01 10:28:50 -06:00
Kumar Gala
0151cbaccf 85xx: Enable 64-bit PCI resources on all Freescale boards
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
2008-10-24 17:33:06 -05:00
Kumar Gala
1c9aa76bf9 85xx: Enable interrupt and setexpr commands on Freescale 85xx boards
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-18 21:54:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0e8d158664 rename CFG_ENV macros to CONFIG_ENV
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:06 +02:00
Jean-Christophe PLAGNIOL-VILLARD
5a1aceb068 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:04 +02:00
Timur Tabi
e8d18541c6 Update Freescale 85xx boards to sys_eeprom.c
The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
format, and so it obsoletes board/freescale/common/cds_eeprom.c.  Freescale
86xx boards already use sys_eeprom.c, so this patch migrates the remaining
Freescale 85xx boards to use it as well.  cds_eeprom.c is deleted.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-09-09 10:13:35 +02:00
Jon Loeliger
2b40edb10d FSL DDR: Convert MPC8555ADS to new DDR code.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:49 -05:00
Jean-Christophe PLAGNIOL-VILLARD
00b1883a4c drivers/mtd: Move conditional compilation to Makefile
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-13 01:40:42 +02:00
Kumar Gala
ddde74a159 85xx: remove dummy board_early_init_f
A number of board ports have empty version of board_early_init_f
for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-11 00:36:02 -05:00
Kumar Gala
978e81604c 85xx: Remove unused and unconfigured memory test code.
Remove unused and unconfigured DDR test code from FSL 85xx boards.
Besides, other common code exists.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-11 00:35:52 -05:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Jon Loeliger
25eedb2c19 FSL: Clean up board/freescale/common/Makefile
Each file that can be built here now follows some
CONFIG_ option so that they are appropriately built
or not, as needed.  And CONFIG_ defines were added
to various board config files to make sure that happens.

The other board/freescale/*/Makefiles no longer need
to reach up and over into ../common to build their
individually needed files any more.

Boards that are CDS specific were renamed with cds_ prefix.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-26 11:43:04 -05:00
Kumar Gala
f69766e4b5 85xx: Add the concept of CFG_CCSRBAR_PHYS
When we go to 36-bit physical addresses we need to keep the concept of
the physical CCSRBAR address seperate from the virtual one.

For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:03 -05:00
Kumar Gala
7dc358bb0d 85xx: Get ride of old TLB setup code
Now that all boards have been converted, remove old config code and the
config option for the new style.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-17 02:19:18 -06:00
Kumar Gala
0db37dc2ee 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-17 02:08:24 -06:00
Kumar Gala
2cfaa1aa1a 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-16 23:21:55 -06:00
Kumar Gala
b009f3eca9 85xx: Remove cache config from configs.h
Either use the standard defines in asm/cache.h or grab the information
at runtime from the L1CFG SPR.

Also, minor cleanup in cache.h to make the code a bit more readable.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:04 -06:00
Kumar Gala
82ac8c9714 Update Freescale MPC85xx ADS/CDS/MDS board config
* Enabled CONFIG_CMD_ELF

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00
Kumar Gala
22abb2d2ea Update Freescale MPC85xx ADS/CDS/MDS board config
* Removed some misc environment setup
* Enabled CONFIG_CMDLINE_EDITING

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00
Kumar Gala
b90d254976 Update MPC85xx CDS to use libfdt
Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
ethernet, pci, and serial for the various fixups that are done.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:19 -06:00
Kumar Gala
7600d47b8f Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
On the MPC85xx CDS we have two issues:

1. The device tree fixup code did not check to see if the property we are
trying to update is actually found.  Its possible that it would update
random memory starting at 0.

2. Newer Linux kernel's have moved the location of the PCI nodes to be
sibilings of the soc node and not children.  The explicit PATH to the PCI
node would not be found for these device trees.  Add the ability to handle
both paths.  In the future we shouldn't handle such fixups by explicit path.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-19 11:25:01 -05:00
Kim Phillips
3bb342fc85 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
and make some minor corrections to the FDT part of the README.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-29 01:46:25 +02:00
Andy Fleming
10327dc554 Add CONFIG_HAS_ETH0 to all boards with TSEC
The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
to update TSEC1's device-tree node, so we need to add it
to all the boards with TSECs.  Do this for 83xx and 86xx, too,
since they will eventually do something similar.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16 16:35:02 -05:00
Andy Fleming
3a79013e2a Define tsec flag values in config files
The tsec_info structure and array has a "flags" field for each
ethernet controller.  This field is the only reason there are
settings.  Switch to defining TSECn_FLAGS for each controller
in the config header, and we can greatly simplify the array, and
also simplify the addition of future boards.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16 12:12:49 +02:00
Randy Vinson
7f3f2bd2dc 85xxCDS: Add make targets for legacy systems.
The PCI ID select values on the Arcadia main board differ depending
on the version of the hardware. The standard configuration supports
Rev 3.1. The legacy target supports Rev 2.x.

Signed-off-by Randy Vinson <rvinson@mvista.com>
2007-08-14 01:51:39 -05:00
Jon Loeliger
659e2f6736 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 09:10:49 -05:00
Jon Loeliger
2835e518c9 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-05 03:41:29 +02:00
Kim Phillips
255a3577c8 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
For all practical u-boot purposes, TSECs don't differ throughout the
mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-05-17 00:07:21 +02:00
Jon Loeliger
2047672684 Converted all 85xx boards to use a common FSL I2C driver.
Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
And removed hard i2c path from a few u-boot.lds scipts too.
Minor whitespace cleanups along the way.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-20 15:50:15 -05:00
Andy Fleming
8272dc2f58 Updated config headers to add default FDT-based booting 2006-09-19 09:42:18 -05:00
Matthew McClintock
bf1dfffd8c * Added VIA configuration table
* Added support for PCI2 on CDS
  Patch by Andy Fleming 17-Mar-2006

Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-08-09 13:50:56 -05:00
Matthew McClintock
0e16387db1 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-08-09 13:50:30 -05:00
Jon Loeliger
d9b94f28a4 * Patch by Jon Loeliger, 2005-05-05
Implemented support for MPC8548CDS board.
  Added DDR II support based on SPD values for MPC85xx boards.
  This roll-up patch also includes bugfies for the previously
  published patches:
    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
2005-07-25 14:05:07 -05:00
Jon Loeliger
7202d43dde * Patch by Jon Loeliger, Kumar Gala, 2005-02-08
For MPC85xxCDS:
    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
    for faster flash parts.
    Add documentation for BR/OR for FLASH.
2005-07-25 11:13:26 -05:00
Jon Loeliger
9c4c5ae3e1 * Patch by Jon Loeliger, Kumar Gala 2005-02-08
- Convert the CPM2 based functionality to use new CONFIG_CPM2
    option rather than a myriad of CONFIG_MPC8560-like variants.
    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
    new CONFIG_CPM2 option to each 8260 board.
2005-07-23 10:37:35 -05:00
wdenk
a1191902ca * Patch by Jon Loeliger, 02 Sep 2004:
Reset monitor size back to 256 so environment can be written
  to flash on MPC85xx ADS and CDS releases.

* Patch by Paolo Broggini, 02 Sep 2004:
  Make BSS clearing on ARM systems more robust

* Patch by Yue Hu and Joe, 01 Sep 2004:
  - add PCI support for ixp425;
  - add EEPRO100 suppor tfor ixdp425 board.

* Fix problem with protected sector detection in driver/cfi_flash.c
2005-01-09 17:12:27 +00:00
wdenk
e2ffd59b4d * Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.
2004-12-31 09:32:47 +00:00
wdenk
5c952cf024 Patches by Scott McNutt, 24 Aug 2004:
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.
2004-10-10 21:27:30 +00:00
wdenk
03f5c55021 Patches by Jon Loeliger, 24 Aug 2004:
- Add support for the MPC8541 and MPC8555 CDS boards
- Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
2004-10-10 21:21:55 +00:00