Commit graph

75654 commits

Author SHA1 Message Date
Samuel Holland
7f51b554be power: pmic: Consistently depend on DM_PMIC
Kconfig symbols for two PMIC drivers (PMIC_AS3722 and DM_PMIC_MC34708)
were missing a dependency on DM_PMIC. To fix this inconsistency, and to
keep it from happening again, wrap the driver section with "if DM_PMIC"
instead of using a "depends on DM_PMIC" clause for each driver.

Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-12 09:35:41 +01:00
Chukun Pan
e7510d24ca sunxi: Add support for FriendlyARM NanoPi R1S H5
This adds support for the NanoPi R1S H5 board.

Allwinner H5 SoC
512MB DDR3 RAM
10/100/1000M Ethernet x 2
RTL8189ETV WiFi 802.11b/g/n
USB 2.0 host port (A)
MicroSD Slot
Reset button
Serial Debug Port
WAN - LAN - SYS LED

The dts file is taken from Linux 5.14 tag.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Samuel Holland
23c83366f3 clk: sunxi: Add drivers for A31 and H6 PRCM CCUs
Add a driver so the clocks/resets for these peripherals (especially I2C,
RSB, and UART) can be enabled using the normal uclass methods.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Samuel Holland
c61897bf02 clk: sunxi: Add support for I2C gates/resets
Currently, the I2C clocks are configured in the sunxi board code. Add
the I2C clocks to the DM clock driver so they can be enabled from the
DM I2C driver using the normal uclass methods.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Samuel Holland
8fe8ff3411 sunxi: gpio: Remove bank-specific size macros
Since the beginning, all banks have had space for 32 pins, even when
not all pins were implemented. Let's use a single constant for the GPIO
bank size here, like the GPIO driver is already doing.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Samuel Holland
4d9958b642 sunxi: gpio: Remove name_to_gpio macro
This clarifies which callers must be updated to complete the DM_GPIO
conversion.

The only remaining caller of name_to_gpio in generic code is inside the
!DM_GPIO block in cmd/gpio.c. DM_GPIO is always selected on sunxi, so
that code cannot be reached. And after this commit, there are only two
remaining implementations of name_to_gpio.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Samuel Holland
425084610e sunxi: Clean up inclusions of asm/arch/gpio.h
As part of migrating to DM_GPIO and DM_PINCTRL, eventually we will
remove the asm/arch/gpio.h header. In preparation, clean up the various
files that include it.

Some files did not contain any GPIO code at all, so this header was
completely unused.

A few files contained only legacy platform-specific GPIO code for
setting up pin muxes. They were left unchanged, as that code will be
completely removed by the DM_PINCTRL migration.

The remaining files contain some combination of DM_GPIO and legacy GPIO
code. For those, switch to including asm/gpio.h (if it wasn't included
already). Right now, this header provides both sets of functions,
because ARCH_SUNXI selects GPIO_EXTRA_HEADER. This will still be the
right header to include once the DM_GPIO migration is complete and
GPIO_EXTRA_HEADER is no longer needed.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Arnaud Ferraris
0534153fd1 pinephone_defconfig: add support for early-boot status LED
This commit enables the green status LED (PD18/GPIO 114) on boot in the
SPL, in order to provide visual feedback that the PinePhone is booting.

Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Arnaud Ferraris
8f872bb37d board: sunxi: enable status LED early
For some systems, such as the PinePhone, there is no way for the end
user to make sure the system is indeed booting before the boot script is
executed, which takes several seconds. Therefore, it can be useful to
provide early visual feedback as soon as possible.

In order achieve this goal, this patch initializes the status LED (if
configured) in the SPL.

Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Samuel Holland
14c8c631e9 gpio: sunxi: Remove the sunxi_name_to_gpio_bank function
The only caller of this function was the MMC pinmux code, which used it
to parse a string given from a Kconfig symbol. As the Kconfig symbol has
been converted to a Boolean, this function is no longer needed.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Samuel Holland
dda9fa734f sunxi: Simplify MMC pinmux selection
Only one board, Yones Toptech BD1078, actually uses a non-default MMC
pinmux. All other uses of these symbols select the default value or an
invalid value. To simplify things, remove support for the unused pinmux
options, and convert the remaining option to a Boolean.

This allows the pinmux to be chosen by the preprocessor, instead of
having the code parse a string at runtime (for a build-time option!).
Not only does this reduce code size, but it also allows this Kconfig
option to be used in a table-driven DM pinctrl driver.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Samuel Holland
21d314a661 clk: sunxi: Move header out of arch directory
The CCU header is only used by the DM drivers, not any platform code.
Its current location adds an artificial dependency on CONFIG_ARM and
ARCH_SUNXI, which will be problematic when adding the CCU driver for
a RISC-V sunxi platform.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:44 +01:00
Arnaud Ferraris
5427da02be configs: add PineTab defconfig
The PineTab device-tree is already in u-boot, this commit adds the
corresponding defconfig, based on pinephone_defconfig.

Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11 10:46:43 +01:00
Tom Rini
f331497d3a - add 30bpp support (EFI, simplefb, vidconsole)
- fix video console name in CONSOLE_MUX Kconfig help
  - move mxsfb driver config option to Kconfig
  - remove unused mx3fb driver
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCYWHeIw4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXPMXAJsEn/v2k7xaWSjP11DfkPdoj2rmGQCeIijNt60a
 4UNYJe3S4pPBiNMamJo=
 =spnC
 -----END PGP SIGNATURE-----

Merge tag 'video-20211009' of https://source.denx.de/u-boot/custodians/u-boot-video

 - add 30bpp support (EFI, simplefb, vidconsole)
 - fix video console name in CONSOLE_MUX Kconfig help
 - move mxsfb driver config option to Kconfig
 - remove unused mx3fb driver

# gpg verification failed.
2021-10-09 17:47:27 -04:00
Anatolij Gustschin
79c05335a9 video: move MXS to Kconfig
Move CONFIG_VIDEO_MXS from board headers to Kconfig
and drop it from obsolete cfb_console driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-09 19:50:03 +02:00
Anatolij Gustschin
450d937812 video: remove not used mx3fb driver
i.MX31 support was removed, and the non dm-video driver
is obsolete and not used. Remove it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2021-10-09 19:42:32 +02:00
Anatolij Gustschin
de99e776b8 common: Kconfig: use 'vidconsole' name instead of old 'video'
After DM_VIDEO conversion the 'vidconsole' is the correct name
for the frame buffer console. 'video' will not work, so update
the description of the config option.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2021-10-09 19:41:33 +02:00
Simon Glass
2a2d8e94dd lz4: Use a private header for U-Boot
At present U-Boot has a header file called lz4.h for its own use. If the
host has its own lz4 header file installed (e.g. from the 'liblz4-dev'
package) then host builds will use that instead.

Move the U-Boot file into its own directory, as is done with various
other headers with the same problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-09 13:09:56 -04:00
Mark Kettenis
79f9defeba efi_loader: GOP: Fix 30bpp block transfer support
Convert pixel values when necessary like we do for 16bpp
framebuffers.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-09 18:50:31 +02:00
Mark Kettenis
2c2653d6f9 video: simplefb: Add 30bpp support
Recognize the canonical format strings for framebuffers in
30bpp mode and 32/24bpp mode.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2021-10-09 18:48:25 +02:00
Mark Kettenis
01fcf0eea6 efi_loader: GOP: Add 30bpp support
Provide correct framebuffer information for 30bpp modes.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2021-10-09 18:46:13 +02:00
Mark Kettenis
0efe41ca15 video: Add 30bpp support
Add support for 30bpp mode where pixels are picked in 32-bit
integers but use 10 bits instead of 8 bits for each component.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2021-10-09 18:43:51 +02:00
Tom Rini
94e922c76a Merge branch '2021-10-08-image-cleanups'
- A large number of image file and tooling related cleanups
2021-10-08 16:02:55 -04:00
Simon Glass
4cb35b7a1f image: Split up boot_get_fdt()
This function is far too long. Before trying to remove #ifdefs, split out
the code that deals with selecting the FDT into a separate function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
a2198cd018 image: Reduce variable scope in boot_get_fdt()
Move the variables declarations to where they are needed, to reduce the
number of #ifdefs needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
b53541f7f6 image: Remove some #ifdefs from image-fit and image-fit-sig
Drop the #ifdefs which are easy to remove without refactoring.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
f33a2c1bd0 image: Remove #ifdefs from select_ramdisk()
Use boolean variables to deal with the strange #ifdef logic of this
function, so we can remove the #ifdefs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
e4c928792e image: Split up boot_get_ramdisk()
This function is far too long. Before trying to remove #ifdefs, split out
the code that deals with selecting the ramdisk into a separate function.

Leave the code indented as it was for easier review. The next patch cleans
this up along with checkpatch violations.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
78f88790e3 image: Reduce variable scope in boot_get_ramdisk()
Move the variables declarations to where they are needed, to reduce the
number of #ifdefs needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
1df654a6af image: Drop most #ifdefs in image-board.c
Remove ifdefs in this file, so far as possible without too much
refactoring.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
78740bcce8 image: Drop #ifdefs for fit_print_contents()
Use a simple return to drop the unwanted code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
13c133b995 image: Drop unnecessary #ifdefs from image.h
This file has a lot of conditional code and much of it is unnecessary.
Clean this up to reduce the number of build combinations.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
0ab5e02704 image: Tidy up fit_unsupported_reset()
This function is only used in one place and does not need to use the
preprocessor. Move it to the C file and convert it to a normal function.

Drop fit_unsupported() since it is not used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
1eccbb16a2 efi: Correct dependency on FIT_SIGNATURE
At present EFI_SECURE BOOT selects RSA but does not necessarily enable
FIT_SIGNATURE. Mostly this is fine, but a few boards do not enable it,
so U-Boot tries to do RSA verification when loading FIT images, but it
is not enabled.

This worked because the condition for checking the RSA signature is
wrong in the fit_image_verify_with_data() function. In order to fix it
we need to fix this dependency. Make sure that FIT_SIGNATURE is enabled
so that RSA can be used.

It might be better to avoid using 'select' in this situation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:27 -04:00
Simon Glass
fa13940740 image: Drop IMAGE_ENABLE_IGNORE
We can use the new host_build() function for this, so drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:27 -04:00
Simon Glass
3ac0f50412 image: Drop IMAGE_OF_SYSTEM_SETUP
This is not needed with Kconfig, since we can use IS_ENABLED() easily
enough. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
30ba282865 image: Drop IMAGE_OF_BOARD_SETUP
This is not needed with Kconfig, since we can use IS_ENABLED() easily
enough. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
806d1ff37b image: Drop IMAGE_BOOT_GET_CMDLINE
This is not needed with Kconfig, since we can use IS_ENABLED() easily
enough and the board code is now in a separate file. Update the only place
where this is used and drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
e7d285b2f3 image: Use the correct checks for CRC32
Add a host Kconfig for CRC32. With this we can use CONFIG_IS_ENABLED(CRC32)
directly in the host build, so drop the unnecessary indirection.

Add a few more conditions to SPL_CRC32 to avoid build failures as well as
TPL_CRC32. Also update hash.c to make crc32 optional and to actually take
notice of SPL_CRC32.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
2bbed3ff8c image: Use Kconfig to enable FIT_RSASSA_PSS on host
Add a host Kconfig for FIT_RSASSA_PSS. With this we can use
CONFIG_IS_ENABLED(FIT_RSASSA_PSS) directly in the host build, so drop the
forcing of this in the image.h header.

Drop the #ifdef around padding_pss_verify() too since it is not needed.
Use the compiler to check the config where possible, instead of the
preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
e059157f0d image: Use Kconfig to enable CONFIG_FIT_VERBOSE on host
Add a host Kconfig for FIT_VERBOSE. With this we can use
CONFIG_IS_ENABLED(FIT_VERBOSE) directly in the tools build, so drop the
forcing of this in the image.h header.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
0c303f9a66 image: Drop IMAGE_ENABLE_OF_LIBFDT
Add a host Kconfig for OF_LIBFDT. With this we can use
CONFIG_IS_ENABLED(OF_LIBFDT) directly in the tools build, so drop the
unnecessary indirection.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
bf371b4cf5 image: Drop IMAGE_ENABLE_FIT
Make use of the host Kconfig for FIT. With this we can use
CONFIG_IS_ENABLED(FIT) directly in the host build, so drop the unnecessary
indirection.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
d54f7e3f23 hash: Drop some #ifdefs in hash.c
We can use the __maybe_unused attribute to avoid some of the #ifdefs in
this file. Update the functions accordingly.

Note: The actual hashing interface is still a mess, with four separate
combinations and lots of #ifdefs. This should really use a driver
approach, e.g. as is done with partition drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
2c21256b27 hash: Use Kconfig to enable hashing in host tools and SPL
At present when building host tools, we force CONFIG_SHAxxx to be enabled
regardless of the board Kconfig setting. This is done in the image.h
header file.

For SPL we currently just assume the algorithm is desired if U-Boot proper
enables it.

Clean this up by adding new Kconfig options to enable hashing on the host,
relying on CONFIG_IS_ENABLED() to deal with the different builds.

Add new SPL Kconfigs for hardware-accelerated hashing, to maintain the
current settings.

This allows us to drop the image.h code and the I_WANT_MD5 hack.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
603d15a572 spl: cypto: Bring back SPL_ versions of SHA
Unfortunately these were removed by mistake. This means that adding hash
support to SPL brings in all software algorithms, with a substantial
increase in code size.

The origin of the problem was renaming them to SPL_FIT_xxx and then these
were removed altogether in a later commit.

Add them back. This aligns with CONFIG_MD5, for example, which has an SPL
variant.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: f5bc9c25f3 ("image: Rename SPL_SHAxxx_SUPPORT to SPL_FIT_SHAxxx")
Fixes: eb5171ddec ("common: Remove unused CONFIG_FIT_SHAxxx selectors")
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
e02b3fd4b9 image: Add Kconfig options for FIT in the tools build
In preparation for enabling CONFIG_IS_ENABLED() on the host build, add
some options to enable the various FIT options expected in these tools.
This will ensure that the code builds correctly when CONFIG_TOOLS_xxx
is distinct from CONFIG_xxx.

Drop some #ifdefs which are immediately unnecessary (many more are in
later patches).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
5500a408dd kconfig: Add tools support to CONFIG_IS_ENABLED()
At present we must separately test for the host build for many options,
since we force them to be enabled. For example, CONFIG_FIT is always
enabled in the host tools, even if CONFIG_FIT is not enabled by the
board itself.

It would be more convenient if we could use, for example,
CONFIG_IS_ENABLED(FIT) and get CONFIG_HOST_FIT, when building for the
host. Add support for this.

With this and the tools_build() function, we should be able to remove all
the #ifdefs currently needed in code that is build by tools and targets.

This will be even nicer when we move to using CONFIG(xxx) everywhere,
since all the #ifdef and IS_ENABLED/CONFIG_IS_ENABLED stuff will go away.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> # b4f73886
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
c9d6b5b5dc compiler: Rename host_build() to tools_build()
With the new TOOLS_LIBCRYPTO and some other changes, it seems that we are
heading towards calling this a tools build rather than a host build,
although of course it does happen on the host.

I cannot think of anything built by the host which cannot be described as
a tool, so rename this function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 15:53:26 -04:00
Simon Glass
4ed37abc49 image: Remove ifdefs around image_setup_linux() el at
Drop some more ifdefs in image-board.c and also the FPGA part of bootm.c
which calls into it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08 15:53:26 -04:00