Commit graph

36 commits

Author SHA1 Message Date
Haavard Skinnemoen
c3bf1ad7ba mmc: Move atmel_mci driver into drivers/mmc
This makes it easier to use the driver on other platforms.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-10 00:05:52 +02:00
Haavard Skinnemoen
d2d54ea449 avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
After we move the atmel_mci driver into drivers/mmc, we can't select
it with CONFIG_MMC anymore. Introduce a new symbol specifically for
this driver so that there's no ambiguity.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-10 00:04:47 +02:00
Wolfgang Denk
b223017f08 Merge branch 'master' of git://www.denx.de/git/u-boot-avr32 2008-07-07 00:39:43 +02:00
Haavard Skinnemoen
341188b9cc MMC: Consolidate MMC/SD command definitions
This moves the MMC and SD Card command definitions from
include/asm/arch/mmc.h into include/mmc.h. These definitions are
given by the MMC and SD Card standards, not by any particular
architecture.

There's a lot more room for consolidation in the MMC drivers which
I'm hoping to get done eventually, but this patch is a start.

Compile-tested for all avr32 boards as well as lpc2292sodimm and
lubbock. This should cover all three mmc drivers in the tree.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-28 22:40:15 +02:00
Haavard Skinnemoen
5605ef6b58 avr32: Fix SPI portmux initialization
Use the new GPIO manipulation functions to set up the chip select lines,
and make sure both busses use GPIO for chip select control.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-20 12:46:43 +02:00
Peter Ma
4688f9e34a avr32: Add GPIO manipulation functions
Adds GPIO manipulation functions for AVR32 AP7 platform.

Signed-off-by: Peter Ma <pma@mediamatech.com>
[haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-20 10:40:42 +02:00
Hans-Christian Egtvedt
60445cb5c3 atmel_spi: Driver for the Atmel SPI controller
This adds a driver for the SPI controller found on most AT91 and AVR32
chips, implementing the new SPI API.

Changed in v4:
  - Update to new API
  - Handle zero-length transfers appropriately. The user may send a
    zero-length SPI transfer with SPI_XFER_END set in order to
    deactivate the chip select after a series of transfers with chip
    select active. This is useful e.g. when polling the status
    register of DataFlash.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-06-03 20:30:05 +02:00
Haavard Skinnemoen
a8092c021d avr32: Fix theoretical race in udelay()
If the specified delay is very short, the cycle counter may go past the
"end" time we are waiting for before we get around to reading it.

Fix it by checking the different between the cycle count "now" and the
cycle count at the beginning. This will work as long as the delay
measured in number of cycles is below 2^31.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:31 +02:00
Haavard Skinnemoen
48ea623eae avr32: Compile atmel_mci.o conditionally
Remove #ifdef CONFIG_MMC from the source file and use conditional
compilation in the Makefile instead.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:31 +02:00
Haavard Skinnemoen
e92a5bf833 avr32: Fix wrong error flags in atmel_mci driver
Make sure we check for CRC errors when sending commands that use CRC
checking.

Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:31 +02:00
Haavard Skinnemoen
7a96ddadd1 avr32: Fix two warnings in atmel_mci.c
The warnings are harmless but annoying. Let's fix them.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:31 +02:00
Haavard Skinnemoen
a23e277c4a avr32: Rework SDRAM initialization code
This cleans up the SDRAM initialization and related code a bit, and
allows faster booting.

  * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
  * Remove memory test from sdram_init() and make caller responsible
    for verifying the SDRAM and determining its size.
  * Remove base_address member from struct sdram_config (was sdram_info)
  * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
  * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:31 +02:00
Haavard Skinnemoen
95107b7c02 avr32: Do stricter stack checking in the exception handler
Don't do a stack dump if the stack pointer is outside the memory area
reserved for stack.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:30 +02:00
Haavard Skinnemoen
caf83ea888 avr32: Use the same entry point for reset and exception handling
Since the reset vector is always aligned to a very large boundary, we
can save a couple of KB worth of alignment padding by placing the
exception vectors at the same address.

Deciding which one it is is easy: If we're handling an exception, the
CPU is in Exception mode. If we're starting up after reset, the CPU is
in Supervisor mode. So this adds a very minimal overhead to the reset
path (only executed once) and the exception handling path (normally
never executed at all.)

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:30 +02:00
Haavard Skinnemoen
3ace2527ba avr32: Rename pm_init() as clk_init() and make SoC-specific
pm_init() was always more about clock initialization than anything
else. Dealing with PLLs, clock gating and such is also inherently
SoC-specific, so move it into a SoC-specific directory.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:30 +02:00
Haavard Skinnemoen
4f5972c3b2 avr32: Use new-style Makefile for the at32ap platform
This makes it easier to avoid compiling certain files later.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:30 +02:00
Haavard Skinnemoen
a9b2bb78a1 avr32: Remove unused file cpu/at32ap/pm.c
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:30 +02:00
Haavard Skinnemoen
781eb9a1e4 avr32: Get rid of the .flashprog section
The .flashprog section was only needed back when we were running
directly from flash, and it's even more useless on NGW100 since it
uses the CFI flash driver which never used this workaround in the
first place.

Remove it on STK1000 as well, and get rid of all the associated code and
annotations.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:29 +02:00
David Brownell
f793a35819 avr32: Disable the AP7000 internal watchdog on startup
This patch forces the watchdog off in all cases.  That will at least
get rid of the constant reboot cycle, though it won't let the watchdog
actually run in the new kernels:  its probe() comes up with a polite
warning.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:29 +02:00
Haavard Skinnemoen
d38da53794 AVR32: Make SDRAM refresh rate configurable
The existing code assumes the SDRAM row refresh period should always
be 15.6 us. This is not always true, and indeed on the ATNGW100, the
refresh rate should really be 7.81 us.

Add a refresh_period member to struct sdram_info and initialize it
properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
panic() until the refresh_period member is updated properly.

Big thanks to Gerhard Berghofer for pointing out this issue.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-05 12:14:27 +01:00
Haavard Skinnemoen
9570bcd87f AVR32: Fix wrong pin setup for USART3
As reported by Gerhard Berghofer:

in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
instead of PB18 and PB19.

which is obviously correct. There's currently no code that uses
USART3, but custom boards may run into problems.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17 10:35:02 +01:00
Haavard Skinnemoen
5fee84a794 AVR32: Make some AT32AP700x peripherals optional
Add a chip-features file providing definitions of the form

AT32AP700x_CHIP_HAS_<peripheral>

to indicate the availability of the given peripheral on the currently
selected chip.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17 10:34:12 +01:00
Haavard Skinnemoen
36f28f8a96 AVR32: Rename at32ap7000 -> at32ap700x
The SoC-specific code for all the AT32AP700x CPUs is practically
identical; the only difference is that some chips have less features
than others. By doing this rename, we can add support for the AP7000
derivatives simply by making some features conditional.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17 10:34:12 +01:00
Haavard Skinnemoen
4d5fa99c73 atmel_mci: Show SR when block read fails
Show controller status as well as card status when an error occurs
during block read.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17 10:34:11 +01:00
Haavard Skinnemoen
a08458303e atmel_mci: Fix data timeout value
Calculate the data timeout based on values from the CSD instead of
just using a hardcoded DTOR value. This is a backport of a similar fix
in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
instead of down.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-08-13 17:35:16 +02:00
Haavard Skinnemoen
0ba8eed28b AVR32: Include <div64.h> instead of <asm/div64.h>
include/asm-avr32/div64.h was recently moved to include/div64.h, but
cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
the patch was merged perhaps?)

This patch updates cpu/at32ap/interrupts.c so that the avr32 port
compiles again.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-08-13 17:22:31 +02:00
Haavard Skinnemoen
f0d1246ed7 atmel_mci: Use 512 byte blocksize if possible
Instead of always using the largest blocksize the card supports, check
if it can support smaller block sizes and use 512 bytes if possible.
Most cards do support this, and other parts of u-boot seem to have
trouble with block sizes different from 512 bytes.

Also enable underrun/overrun protection.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
2007-08-13 16:33:52 +02:00
Wolfgang Denk
b99c1e6d8e Merge with /home/wd/git/u-boot/custodian/u-boot-avr32; code cleanup. 2007-04-18 16:53:52 +02:00
Haavard Skinnemoen
fc26c97bb6 Atmel MCI driver
Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.

The AT91 ARM-based CPUs use basically the same hardware, so it should
be possible to share this driver, but no effort has been made so far.

Hardware documentation can be found in the AT32AP7000 data sheet,
which can be downloaded from

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 16:14:06 +02:00
Haavard Skinnemoen
05fdab1ef6 AVR32: Add clk and gpio infrastructure for mmci
Implement functions for configuring the mmci pins, as well as
functions for getting the clock rate of the mmci controller.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 16:14:06 +02:00
Haavard Skinnemoen
b4ec9c2d43 AVR32: Add clk and gpio infrastructure for macb0 and macb1
Implement functions for configuring the macb0 and macb1 pins, as
well as functions for getting the clock rate of the various
busses the macb ethernet controllers are connected to.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 16:14:06 +02:00
Haavard Skinnemoen
1f4f2121c2 AVR32: Relocate u-boot to SDRAM
Relocate the u-boot image into SDRAM like everyone else does. This
means that we can handle much larger .data and .bss than we used to.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
df548d3c3e AVR32: Resource management rewrite
Rewrite the resource management code (i.e. I/O memory, clock gating,
gpio) so it doesn't depend on any global state. This is necessary
because this code is heavily used before relocation to RAM, so we
can't write to any global variables.

As an added bonus, this makes u-boot's memory footprint a bit smaller,
although some functionality has been left out; all clocks are enabled
all the time, and there's no checking for gpio line conflicts.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00
Haavard Skinnemoen
c841beedde AVR32: Split start_u_boot into board_init_f and board_init_r
Split the avr32 initialization code into a function to run before
relocation, board_init_f and a function to run after relocation,
board_init_r. For now, board_init_f simply calls board_init_r
at the end.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:20 +02:00
Wolfgang Denk
d38936cdae Fix "ar" flags in some Makefiles to allow for silent "make -s" 2006-10-27 11:55:21 +02:00
Wolfgang Denk
72a087e047 Add AT32AP CPU and AT32AP7000 SoC support
Patch by Haavard Skinnemoen, 06 Sep 2006

This patch adds support for the AT32AP CPU family and the AT32AP7000
chip, which is the first chip implementing the AVR32 architecture.

The AT32AP CPU core is a high-performance implementation featuring a
7-stage pipeline, separate instruction- and data caches, and a MMU.
For more information, please see the "AVR32 AP Technical Reference":

http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf

In addition to this, the AT32AP7000 chip comes with a large set of
integrated peripherals, many of which are shared with the AT91 series
of ARM-based microcontrollers from Atmel. Full data sheet is
available here:

http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24 14:27:35 +02:00