Commit graph

677 commits

Author SHA1 Message Date
Fabio Estevam
c7430d7d5e ipu_common: Let the MX6 IPU clock be calculated in run-time
MX6Q/QP IPU operates at 264MHz and MX6DL IPU at 198MHz.

When running a SPL target, which supports multiple MX6 variants we cannot
properly setup the IPU clock frequency via CONFIG_IPUV3_CLK option as
such decision is done in build-time currently.

Remove the CONFIG_IPUV3_CLK option and let the IPU clock frequency be
configured in run-time on mx6.

Reported-by: Eric Nelson <eric@nelint.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
[agust: fixed #endif in cgtqmx6eval.h]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-09-11 12:46:51 +02:00
Anatolij Gustschin
f8ba7f2774 video: ipuv3_fb: skip IPU shutdown if IPU was not enabled before
Boards can skip display interface init using board_video_skip().
If display interface was not initialized (e.g. no ipuv3 framebuffer
registered or IPU clock disabled), booting Linux stops due to the
crash in IPU shutdown function, when accessing IPU registers.
Check IPU clock and skip shutdown if clock is not enabled.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-09-04 23:33:45 +02:00
Tom Rini
9493d05a41 Revert "Merge git://git.denx.de/u-boot-video"
This reverts commit 1d20170467, reversing
changes made to 6aee2ab68c.

The mxc_ipuv3_fb.c changes introduce build failures on some targets.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-01 16:17:17 -04:00
Anatolij Gustschin
0d1ae97c02 video: ipuv3_fb: skip IPU shutdown if IPU was not enabled before
Boards can skip display interface init using board_video_skip().
If display interface was not initialized (e.g. no ipuv3 framebuffer
registered or IPU clock disabled), booting Linux stops due to the
crash in IPU shutdown function, when accessing IPU registers.
Check IPU clock and skip shutdown if clock is not enabled.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-08-29 15:23:55 +02:00
Simon Glass
00caae6d47 env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:24 -04:00
eric.gao@rock-chips.com
fcc1d05098 rockchip: video: Makefile: Add soc specific driver for rk3288 mipi dsi
Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07 21:32:11 +02:00
eric.gao@rock-chips.com
f680a91d5c rockchip: video: mipi: Add rk3288 soc specific driver for mipi dsi
Add rk3288 soc specific driver for mipi dsi.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07 21:16:22 +02:00
eric.gao@rock-chips.com
e9037fb3ad rockchop: video: mipi: Makefile: Add soc specfic driver for rk3399 mipi dsi
Add Makefile item for soc specific driver for rk3399 mipi dsi.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07 20:45:08 +02:00
eric.gao@rock-chips.com
36602eba80 rockchip: video: mipi: Split mipi driver into common and specific parts
To compatible with different rockchip soc, we split the mipi dirver into
common and soc specific parts, and all the soc share the common
functions from common driver part.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[agust: fix build breakage and warnings]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-08-07 20:44:01 +02:00
Bin Meng
c674e00b8a video: Drop the ct69000 driver
This is not used in U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07 18:15:19 +02:00
Bin Meng
aa82f935ab video: Drop the sm501 driver
This is not used in U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07 18:14:36 +02:00
Bin Meng
5ec94cdf8e video: Drop the sed156x driver
This is not used in U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07 18:12:23 +02:00
Bin Meng
0778d0c2d8 video: Drop the l5f31188 driver
This is not used in U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07 18:10:14 +02:00
Simon Glass
079ff3b902 dm: video: tegra124: Convert to livetree
Update these drives to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Stefano Babic
552a848e4f imx: reorganize IMX code as other SOCs
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/<SOC>.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic <sbabic@denx.de>

CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Akshay Bhat <akshaybhat@timesys.com>
CC: Ken Lin <Ken.Lin@advantech.com.tw>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Heiko Schocher <hs@denx.de>
CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
CC: Christian Gmeiner <christian.gmeiner@gmail.com>
CC: Stefan Roese <sr@denx.de>
CC: Patrick Bruenn <p.bruenn@beckhoff.com>
CC: Troy Kisky <troy.kisky@boundarydevices.com>
CC: Nikita Kiryanov <nikita@compulab.co.il>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: "Eric Bénard" <eric@eukrea.com>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Ye Li <ye.li@nxp.com>
CC: Peng Fan <peng.fan@nxp.com>
CC: Adrian Alonso <adrian.alonso@nxp.com>
CC: Alison Wang <b18965@freescale.com>
CC: Tim Harvey <tharvey@gateworks.com>
CC: Martin Donnelly <martin.donnelly@ge.com>
CC: Marcin Niestroj <m.niestroj@grinn-global.com>
CC: Lukasz Majewski <lukma@denx.de>
CC: Adam Ford <aford173@gmail.com>
CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>
CC: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Soeren Moch <smoch@web.de>
CC: Richard Hu <richard.hu@technexion.com>
CC: Wig Cheng <wig.cheng@technexion.com>
CC: Vanessa Maegima <vanessa.maegima@nxp.com>
CC: Max Krummenacher <max.krummenacher@toradex.com>
CC: Stefan Agner <stefan.agner@toradex.com>
CC: Markus Niebel <Markus.Niebel@tq-group.com>
CC: Breno Lima <breno.lima@nxp.com>
CC: Francesco Montefoschi <francesco.montefoschi@udoo.org>
CC: Jaehoon Chung <jh80.chung@samsung.com>
CC: Scott Wood <oss@buserror.net>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Anatolij Gustschin <agust@denx.de>
CC: Simon Glass <sjg@chromium.org>
CC: "Andrew F. Davis" <afd@ti.com>
CC: "Łukasz Majewski" <l.majewski@samsung.com>
CC: Patrice Chotard <patrice.chotard@st.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Stephen Warren <swarren@nvidia.com>
CC: Andre Przywara <andre.przywara@arm.com>
CC: "Álvaro Fernández Rojas" <noltari@gmail.com>
CC: York Sun <york.sun@nxp.com>
CC: Xiaoliang Yang <xiaoliang.yang@nxp.com>
CC: Chen-Yu Tsai <wens@csie.org>
CC: George McCollister <george.mccollister@gmail.com>
CC: Sven Ebenfeld <sven.ebenfeld@gmail.com>
CC: Filip Brozovic <fbrozovic@gmail.com>
CC: Petr Kulhavy <brain@jikos.cz>
CC: Eric Nelson <eric@nelint.com>
CC: Bai Ping <ping.bai@nxp.com>
CC: Anson Huang <Anson.Huang@nxp.com>
CC: Sanchayan Maity <maitysanchayan@gmail.com>
CC: Lokesh Vutla <lokeshvutla@ti.com>
CC: Patrick Delaunay <patrick.delaunay@st.com>
CC: Gary Bisson <gary.bisson@boundarydevices.com>
CC: Alexander Graf <agraf@suse.de>
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-07-12 10:17:44 +02:00
Tom Rini
8d3a25685e Merge git://git.denx.de/u-boot-dm 2017-07-11 20:28:46 -04:00
Simon Glass
1a9f3da917 video: simple-panel: Add a little more debugging
Add some debugging to show when the backlight is enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
2017-07-11 10:08:20 -06:00
Simon Glass
7cf208d73b dm: video: Update pwm_backlight to support livetree
Update this driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
2017-07-11 10:08:20 -06:00
Simon Glass
fb0b709eff dm: video: Sync display on backspace
We should sync the display (e.g. flush cache) when backspace is pressed
to ensure that the character is erased correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
2017-07-11 10:08:20 -06:00
Simon Glass
23acc48d84 tegra: video: Time the LCD init
Calculate the time taken to set up the LCD.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
2017-07-11 10:08:20 -06:00
eric.gao@rock-chips.com
0c6d52bc4b rockchip: video: mipi: Modify format type for debug message
Modify format type for debug message.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
2017-07-11 12:13:48 +02:00
eric.gao@rock-chips.com
0c9eceb7af rockchip: video: mipi: Modify variable type for arm32 compatibility
Some address relevant varibable is defined originally as u64. To
compatible with arm32, this patch change them to uintptr_t type.

Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11 12:13:47 +02:00
Andy Shevchenko
daab59ac05 avr32: Retire AVR32 for good
AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-06 16:17:19 -04:00
Heiko Schocher
5b8e76c35e powerpc, 8xx: remove support for 8xx
There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12 08:37:55 -04:00
Tom Rini
8cb3ce64f9 Merge git://git.denx.de/u-boot-dm 2017-06-10 18:01:22 -04:00
Simon Glass
6b5a09aa38 rockchip: video: Take the vop device out of standby
On reset the standby bit is clear, but if U-Boot is chain-loaded from
another boot loader it may be set. Clear it before starting up video so
that it works correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Squashed in 'rockchip: video: fix taking the VOP device out of standby':
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-09 13:45:33 -06:00
Simon Glass
f418676e9a rockchip: video: Add remove() methods
Add remove() methods for EDP and VOP so that U-Boot can shut down the
video on exit. This avoids leaving DMA running while booting Linux which
can cause problems if Linux uses the frame buffer for something else.

It also makes it clear what is needed to shut down video.

While we are here, make rkvop_enable() static.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Squashed in 'rockchip: video: fix taking the VOP device out of standby':
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-09 13:45:28 -06:00
Simon Glass
505907a467 tegra: video: Don't power up the SOR twice
If U-Boot is the secondary boot loader, or has been run from itself, the
SOR may already be powered up. Powering it up again causes a hang, so
detect this situation and skip it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2017-06-09 13:39:33 -06:00
Philipp Tomsich
76a5e1b715 rockchip: video: document externally visible functions for rk_vop
Documents the externally visible functions shared between the VOP
drivers for the RK3288 and RK3399.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-09 15:57:25 +02:00
Philipp Tomsich
56c7ba3462 rockchip: video: document externally visible functions for rk_hdmi
Documents the externally visible functions shared between the HDMI
drivers for the RK3288 and RK3399.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-09 15:53:48 +02:00
Wenyou Yang
31e5c892b3 video: atmel_hlcdfb: Fix misaligned cache operation warning
Fix the warning,
 ---8<---
CACHE: Misaligned operation at range [3fdffff0, 3fdffffc]
 ---<8---

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-09 15:33:28 +02:00
Jernej Skrabec
b98efa1db3 sunxi: video: Add support for CSC and TVE to DE2 driver
Extend DE2 driver with support for TVE driver, which will be added in
next commit. TVE unit expects data to be in YUV format, so CSC support
is also added here.

Note that HDMI driver has higher priority, so TV out is not probed if
HDMI monitor is detected.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-09 15:30:47 +02:00
Jernej Skrabec
af4c874f11 sunxi: video: Rename tve.c to tve_common.c
In order to avoid future confusion with similary named files, rename
tve.c to tve_common.c. New name better represents the fact that this file
holds code which can be and will be shared between multiple drivers.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-09 15:30:13 +02:00
Philipp Tomsich
64199d4ead rockchip: video: rk_vop: add grf field
The last set of rebases had dropped the 'grf' field from the common
rk_vop.  Add this back to un-break the build (and driver).

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-07 21:30:50 -06:00
Philipp Tomsich
ca562b630e rockchip: video: rk3399: add HDMI TX support on the RK3399
This commit enables the RK3399 HDMI TX, which is very similar to the
one found on the RK3288.  As requested by Simon, this splits the HDMI
driver into a SOC-specific portion (rk3399_hdmi.c, rk3288_hdmi.c) and
a common portion (rk_hdmi.c).

Note that the I2C communication for reading the EDID works well with
the default settings, but does not with the alternate settings used on
the RK3288... this configuration aspect is reflected by the driverdata
for the RK3399 driver.

Having some sort of DTS-based configuration for the regulator
dependencies would be nice for the future, but for now we simply use
lists of regulator names (also via driverdata) that we probe.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 21:30:50 -06:00
Philipp Tomsich
147fd3ac5a rockchip: video: split RK3288-specific part off from rk_hdmi
To prepare for the addition of RK3399 HDMI support, the HDMI driver is
refactored and broken into a chip-specific and a generic part.  This
change adds the internal interfaces, makes common/reusable functions
externally visible and splits the RK3288 driver into a separate file.

For the probing of regulators, we reuse the infrastructure created
during the VOP refactoring... i.e. we simply call into the helper
function defined for the VOP.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 21:30:50 -06:00
Philipp Tomsich
f210e5574f rockchip: video: add mpixelclock settings from Linux driver
The Linux driver now supports higher mpixelclock settings.
Add these to rockchip_phy_config[] and rockchip_mpll_cfg[].

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 21:30:50 -06:00
Philipp Tomsich
cc75afc5d7 rockchip: video: rk3399: enable HDMI output (from the rk_vop) for the RK3399
This commit adds a driver for the RK3399 VOPs capable and all the
necessary plumbing to feed the HDMI encoder. For the VOP-big, this
correctly tracks the ability to feed 10bit RGB data to the encoder.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 21:30:49 -06:00
Philipp Tomsich
d46d40474a rockchip: video: refactor rk_vop and split RK3288-specific code off
To prepare for adding the RK3399 VOP driver (which shares most of its
registers and config logic with the RK3228 VOP), this change refactors
the driver and splits the RK3288-specific driver off.

The changes in detail are:
- introduces a data-structure for chip-specific drivers to register
  features/callbacks with the common driver: at this time, this is
  limited to a callback for setting the pin polarities (between the
  VOP and the encoder modules) and a flag to signal 10bit RGB
  capability
- refactors the probing of regulators into a helper function that
  can take a list of regulator names to probe and autoset
- moves the priv data-structure into a (common) header file to be
  used by the chip-specific drivers to provide base addresses to
  the common driver
- uses a callback into the chip-specific driver to set pin polarities
  (replacing the direct register accesses previously used)
- splits enabling the output (towards an encoder) into a separate
  help function withint the common driver

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 21:30:49 -06:00
Philipp Tomsich
89b2b6186d rockchip: video: Kconfig: set MAX_XRES and MAX_YRES via Kconfig
This introduces two new Kconfig options that configure the maximum
allowable framebuffer size (i.e. the memory reservation/allocation for
the framebuffer):
 - VIDEO_ROCKCHIP_MAX_XRES
 - VIDEO_ROCKCHIP_MAX_YRES
The resulting memory allocation will cover 4 byte per pixel for these
resolutions.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 21:30:49 -06:00
Philipp Tomsich
d4bee08419 rockchip: video: Kconfig: reformat help for VIDEO_ROCKCHIP
For consistency sake (and as we are about to add new options to this
file), reformat the help for VIDEO_ROCKCHIP.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 21:30:49 -06:00
Philipp Tomsich
1208523935 rockchip: video: rk_hdmi: fix implicit definition warnings
When enabling CONFIG_DISPLAY_ROCKCHIP_HDMI, compile-time warning for
the following implicitly defined functions are raised due to a missing
include directive:

  drivers/video/rockchip/rk_hdmi.c: In function 'rk_hdmi_probe':
  drivers/video/rockchip/rk_hdmi.c:150:2: warning: implicit declaration of function 'rk_setreg' [-Wimplicit-function-declaration]
    rk_setreg(&priv->grf->soc_con6, 1 << 15);
    ^~~~~~~~~
  drivers/video/rockchip/rk_hdmi.c:153:2: warning: implicit declaration of function 'rk_clrsetreg' [-Wimplicit-function-declaration]
    rk_clrsetreg(&priv->grf->soc_con6, 1 << 4,
    ^~~~~~~~~~~~

This change fixes this by including <asm/hardware.h> in rk_hdmi.c.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-06-07 21:30:47 -06:00
Simon Glass
f66f88f643 common: Drop inclusion of pci.h
This should not be in common.h - remove it and update the only file that
needs it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 11:02:26 -04:00
Simon Glass
da409ccc4a dm: core: Replace of_offset with accessor (part 2)
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:04 -06:00
Simon Glass
4af0d7e870 dm: Fix up inclusion of common.h
It is good practice to include common.h as the first header. This ensures
that required features like the DECLARE_GLOBAL_DATA_PTR macro,
configuration options and common types are available.

Fix up some files which currently don't do this. This is necessary because
driver model will soon start using global data and configuration in the
dm/read.h header file, included via dm.h. The gd->fdt_blob value will be
used to access the device tree and CONFIG options will be used to
determine whether to support inline functions in the header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:03 -06:00
Simon Glass
a821c4af79 dm: Rename dev_addr..() functions
These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

   1. dev_read_addr...()    - works on devices, supports flat/live tree
   2. devfdt_get_addr...()  - current functions, flat tree only
   3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:01 -06:00
Jernej Skrabec
c10806267d sunxi: video: Split out TVE code
Newer SoCs use same TV encoder unit. Split it out so it can be reused
with new DM video driver.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-15 21:22:24 +02:00
Philipp Tomsich
10ba6b3339 video: bmp: rename CONFIG_BMP_24BMP to CONFIG_BMP_24BPP
Due to a typo, the 24 bit-per-pixel configuration ends in 24BMP
instead of 24BPP. This change renames it throughout the source tree
for consistency and to make moving these options into Kconfig easier
and less error-prone.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2017-05-15 20:55:13 +02:00
Philipp Tomsich
8517f64fe6 rockchip: video: introduce VIDEO_DW_HDMI and select for Rockchip HDMI
Instead of having drivers/video/rockchip/Kconfig point outside of its
hierarchy for dw_hdmi.o, we should use a configuration-option to
include the Designware HDMI support.

This change introduces a new config option (not to be selected via
menuconfig, but to be selected from a dependent video driver's
configuration option) that enables dw_hdmi.o and selects it whenever
the HDMI support for Rockchip SoCs is selected.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-15 20:42:56 +02:00
Jernej Skrabec
4f4e1b6365 video: dw_hdmi: Select HDMI mode only if monitor supports it
Some DVI monitors don't work in HDMI mode. Set it only if edid data
explicitly states that it is supported.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-15 20:38:24 +02:00