Commit graph

2587 commits

Author SHA1 Message Date
Andre Przywara
5a4a891e04 MAINTAINERS, git-mailrc: Update sunxi maintainers
Maxime mentioned that he feels not having the time to be an Allwinner
maintainer anymore. Take over from him.

Maxime, many thanks for your great work in the past! I hope I can still
relay the occasional technical question to you in the future.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-10-29 09:57:13 -04:00
Tom Rini
eca57cafa5 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape
  platforms.
- Add optee_rpmb support for LX2 & Kontron sl28 support
2020-10-29 09:10:24 -04:00
Heinrich Schuchardt
d094a0734c log: allow for message continuation
Some drivers use macro pr_cont() for continuing a message sent via printk.
Hence if we want to convert printk messaging to using the logging system,
we must support continuation of log messages too.

As pr_cont() does not provide a message level we need a means of
remembering the last log level.

With the patch a pseudo log level LOGL_CONT as well as a pseudo log
category LOGC_CONT are introduced. Using these results in the application
of the same log level and category as in the previous log message.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27 13:50:53 -04:00
Michael Walle
4ceb5c6db2 board: kontron: add sl28 support
Add basic support for the Kontron SMARC-sAL28 board. This includes just
the bare minimum to be able to bring up the board and boot linux.

For now, the Single and Dual PHY variant is supported. Other variants
will fall back to the basic variant.

In particular, there is no watchdog support for now. This means that you
have to disable the default watchdog, otherwise you'll end up in the
recovery bootloader. See the board README for details.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30
Tom Rini
18261b8552 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- sun8i emac changes (Andre)
- SCP firmware (Samuel)
2020-10-22 20:32:02 -04:00
Chance.Yang
69509fb0a5 doc: dfu: fix typo in README.dfu
Fix "ram" typos for serial flash

Signed-off-by: Chance.Yang <chance.yang@vatics.com>
2020-10-22 11:26:14 -04:00
Simon Glass
7ad1e0bcf3 log: Tidy up documentation
Fix up the documentation which was lost in a merge conflict in the
conversion to RST.

Fixes: 52d3df7fef ("log: Allow LOG_DEBUG to always enable log output")

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-22 11:26:14 -04:00
Robert Marko
367ea426a5 spi: Add Qualcomm QUP SPI controller driver
This patch adds support for the Qualcomm QUP SPI controller that is commonly found in most of Qualcomm SoC-s.

Driver currently supports v1.1.1, v2.1.1 and v2.2.1 HW.
FIFO and Block modes are supported, no support for DMA mode is planned.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22 09:54:54 -04:00
Sean Anderson
aff60aba6c doc: Document timer API
This adds kerneldocs for <timer.h>.

I don't know who should maintain doc/api/timer.rst, since the timer
subsystem seems to be maintained by SoC maintainers. MAINTAINERS is left
un-updated for the moment.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22 09:54:53 -04:00
Jonas Smedegaard
5108a257b7 git-mailrc: Update email address of Maxime Ripard
Update email address of Maxime Ripard in git-mailrc to match more
recently updated entry in MAINTAINERS.
commit 9bd9b2bcbe ("MAINTAINERS: Update my email address")
commit bf8f4c4400 ("MAINTAINERS: Update email address for Maxime Ripard")

Signed-off-by: Jonas Smedegaard <dr@jones.dk>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-21 23:50:11 +05:30
Chunfeng Yun
78fe97b96e dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD
Add dt-binding for MediaTek USB3 DRD Driver which it's ported
from the Linux kernel DTS binding:
Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
Commit ID:
34d0545978b6 ("dt-bindings: usb: mtu3: fix typo of DMA clock name")

Due to Dual-Role switch is not supported in Uboot, some properties
are removed or changed.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20 00:49:05 +02:00
Chunfeng Yun
8faef3c756 dt-binding: usb: add bindings for some common properties
Add bindings for common properties, include maximum-speed,
dr_mode and phy_type

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20 00:49:05 +02:00
Tom Rini
0f35d96bfd Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Octeon TX: Add NAND driver (Suneel)
- Octeon TX: Add NIC driver driver (Suneel)
- Octeon TX2: Add NIC driver driver (Suneel)
- Armada 8040: Add iEi Puzzle-M80 board support (Luka)
- Armada A37xx SPI: Add support for CS-GPIO (George)
- Espressobin: Use Linux model/compatible strings (Andre)
- Espressobin: Add armada-3720-espressobin-emmc.dts from Linux (Andre)
- Armada A37xx: Small cleanup of config header (Pali)
2020-10-14 13:51:56 -04:00
Heinrich Schuchardt
40a3008632 doc: Sphinx.override_domain() deprecated
Sphinx.override_domain() is deprecated since Sphinx 1.8 and removed in
Sphinx 3.

Use Sphinx.add_domain(, override=True) instead.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-14 11:16:34 -04:00
Heinrich Schuchardt
467d90a37e doc: global data pointer
Add the description of the global data pointer to the generated HTML
documentation.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-14 11:16:34 -04:00
Frédéric Danis
9ea0a1ee93 cmd: Fixup DT to pass PStore Ramoops parameters
To simplify configuration and keep synchronized the PStore/Ramoops between
U-Boot and the Linux kernel, this commit dynamically adds the Ramoops
parameters defined in the U-Boot session to the Device Tree.

Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
2020-10-14 11:16:34 -04:00
Frédéric Danis
9744d1a547 cmd: Add command to display or save Linux PStore dumps
This patch adds a new pstore command allowing to display or save ramoops
logs (oops, panic, console, ftrace and user) generated by a previous
kernel crash.
PStore parameters can be set in U-Boot configuration file, or at run-time
using "pstore set" command. Records size should be the same as the ones
used by kernel, and should be a power of 2.
This command allows:
- to display uncompressed logs
- to save compressed or uncompressed logs, compressed logs are saved as a
  compressed stream, it may need some work to be able to decompress it,
  e.g. adding a fake header:
  "printf "\x1f\x8b\x08\x00\x00\x00\x00\x00\x00\x00" |
  cat - dmesg-ramoops-0.enc.z | gzip -dc"
- ECC part is not used to check memory corruption
- only 1st FTrace log is displayed or saved

Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
[trini: Minor updates for current design, correct spacing in rST]
Signed-off-by: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
2020-10-14 11:16:19 -04:00
Andre Heider
f1a43c84a9 arm64: dts: a3720: add support for espressobin with populated emmc
Import armada-3720-espressobin-emmc.dts from Linux, but use sdhc1 for
emmc, since our dtsi is still based on downstream and sdhc0 is used for
the sd card.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-10-14 07:56:17 +02:00
Thirupathaiah Annapureddy
6a0498a5fd doc: verified-boot: add required-mode information
Add documentation about 'required-mode' property in /signature node
in U-Boot's control FDT.

Signed-off-by: Thirupathaiah Annapureddy <thiruan@linux.microsoft.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-12 21:30:37 -04:00
Tom Rini
9885313b9a Merge branch 'for-next' of https://github.com/lftan/u-boot 2020-10-12 07:55:17 -04:00
Heinrich Schuchardt
1ecb6beb95 doc: remove redundant doc/README.log
doc/README.log was already moved to doc/develop/logging.rst but has been
recreated by an incorrect merge.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-10 16:50:35 -04:00
Simon Glass
52d3df7fef log: Allow LOG_DEBUG to always enable log output
At present if CONFIG_LOG enabled, putting LOG_DEBUG at the top of a file
(before log.h inclusion) causes _log() to be executed for every log()
call, regardless of the build- or run-time logging level.

However there is no guarantee that the log record will actually be
displayed. If the current log level is lower than LOGL_DEBUG then it will
not be.

Add a way to signal that the log record should always be displayed and
update log_passes_filters() to handle this.

With the new behaviour, log_debug() will always log if LOG_DEBUG is
enabled.

Move log_test_syslog_nodebug() into its own file since it cannot be made
to work where it is, with LOG_DEBUG defined.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-10 16:49:58 -04:00
Dalon Westergreen
5c0adb0a71 arm: socfpga: arria10: Add qts-filter for Arria10 socfpga
Add a script to process HPS handoff data and generate a header
for inclusion in u-boot specific devicetree addons. The header
should be included in the top level of u-boot.dtsi.

Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-10-09 17:53:14 +08:00
Sean Anderson
0eabb2ff23 riscv: Add FPIOA and GPIO support for Kendryte K210
This patch adds the necessary configs and docs for FPIOA and GPIO support
on the K210.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-08 11:42:36 -04:00
Sean Anderson
7224d5ccf8 pinctrl: Add support for Kendryte K210 FPIOA
The Fully-Programmable Input/Output Array (FPIOA) device controls pin
multiplexing on the K210. The FPIOA can remap any supported function to any
multifunctional IO pin. It can also perform basic GPIO functions, such as
reading the current value of a pin. However, GPIO functionality remains
largely unimplemented (in favor of the dedicated GPIO peripherals).

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Sean Anderson
5eee93e5b1 pinctrl: Reformat documentation in dm/pinctrl.h
This normalizes the documentation to conform to kernel-doc style [1]. It
also moves the documentation for pinctrl_ops inline, and adds argument and
return-value documentation. I have kept the usual function style for these
comments. I could not find any existing examples of function documentation
inside structs.

[1] https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Sean Anderson
9c08fbfc95 pinctrl: Add pinmux property support to pinctrl-generic
The pinmux property allows for smaller and more compact device trees,
especially when there are many pins which need to be assigned individually.
Instead of specifying an array of strings to be parsed as pins and a
function property, the pinmux property contains an array of integers
representing pinmux groups. A pinmux group consists of the pin identifier
and mux settings represented as a single integer or an array of integers.
Each individual pin controller driver specifies the exact format of a
pinmux group. As specified in the Linux documentation, a pinmux group may
be multiple integers long. However, no existing drivers use multi-integer
pinmux groups, so I have chosen to omit this feature. This makes the
implementation easier, since there is no need to allocate a buffer to do
endian conversions.

Support for the pinmux property is done differently than in Linux.  As far
as I can tell, inversion of control is used when implementing support for
the pins and groups properties to avoid allocating. This results in some
duplication of effort; every property in a config node is parsed once for
each pin in that node. This is not such an overhead with pins and groups
properties, since having multiple pins in one config node does not occur
especially often. However, the semantics of the pinmux property make such a
configuration much more appealing. A future patch could parse all config
properties at once and store them in an array. This would make it easier to
create drivers which do not function solely as callbacks from
pinctrl-generic.

This commit increases the size of the sandbox build by approximately 48
bytes.  However, it also decreases the size of the K210 device tree by 2
KiB from the previous version of this series.

The documentation has been updated from the last Linux commit before it was
split off into yaml files.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Tom Rini
42378e3cd2 bloblist enhancement for alignment
Update ofnode/dev_read phandle function
 sandbox keyboard enhancements and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQHFBAABCAAvFiEE1//at7WoVCu4umzW8Cm2NFgI+6QFAl98qrQRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQ8Cm2NFgI+6Tm5QwAnofBrQ5Y2lwJCUnaratH/J0p5aDXMu37
 SMshRdY4cQPNT1nBFf0fA8UYwTScUla48tPfMO/IxnoMwizxNRZQOH56vcm6w6ie
 73uWlOAl7paw0UGpLYnkuwGC3CoCT7wynTMy0Ap4994alq2pcTK75ra9ODLPn/Sh
 Qg4R4I1VoWbTJT4ZFYcjdMg1+B2hDPd+gVLjjGmOwazncG7aMmpYKJOcscZCuqv8
 Utg30XUxWMxclVPuzXAfREjx+Hhy0AG44ZYv3T44JaOtIAHU4Va/rzqrJRe+pR9V
 YwgjCQhAOuGRswqNJDeg5K8o64jW3vAVULG1HrOZ3gu19ZCmseAH4bNHgiy2SBMz
 CtVtapU+uXjktME2G0vX86Ip8kpxi07p1WeP83TmDFqiGnfEZxn5WH7bYc4l7KSf
 mfWhmrrY5K2ogN5iN8ahc7fGBdHziD+h/Blwn03LgTFHF8f6jxVNJlvjYiya97HN
 1LPk4NNYgPQI3mObL5szQ8FKJ69zSCFk
 =ZqpG
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6oct20' of git://git.denx.de/u-boot-dm

bloblist enhancement for alignment
Update ofnode/dev_read phandle function
sandbox keyboard enhancements and fixes
2020-10-06 13:59:01 -04:00
Heinrich Schuchardt
9c22adb8f9 doc/arch/sandbox.rst: reformat command line options
Reformat the command line options chapter so that the command line options
clearly stand out.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Tom Rini
987ab49366 - generate unique mac address from SoC serial on S400 board
- Add USB support for GXL and AXG SoCs
 - Update Gadget code to use the new GXL and AXG USB glue driver
 - Add a VIM3 board support to add dynamic PCIe enable in OS DT
 - Fix AXG pinmux with requesting GPIOs
 - Add missing GPIOA_18 for AXG pinctrl
 - Add Amlogic PWM driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl97ReAACgkQd9zb2sjI
 SdHHVA/9HuEAzwuJyJoyQcXARIqMwoi6w4qntlmb+VTnxxlKCzLL1Ir68W2+5Y5S
 l+sVkxYDwTmYRs40FOnMdFM1r1Q7IqWwTemqQAcfmGLV+/+MwoDiludGat7JAp1i
 mo/FBcBMLrf3dIJnhCyl2Rezgu06GLCQMAJOlusTDaruUZUHBxPVpAhfRvtlYq1Q
 bCINZfgMcmv8EfReIOE6xGt0+9TKILqQamMByc2ZWdz5UBioqUdQ82arW1rdV/ze
 ATU7vrxNmNlUQnRsMBOry9chbeuNrAhD8sqVloGPUikhf93y0BG7eINmCYrLoXjN
 mopApyWzo3+50GI6It+P9vX6mWVJhd8gAJsvTkRn8ok3flGlRQPmFmAfkjngN/GH
 wdkZpKi/u/ndm2Id7ekZff/Fm/ZmL/kskrRWaWrnuxHNiSNiJvAl+PU7MzCGrgED
 E0MduY1hFpa7wc47xFtI0WKlcdNVQCTRwuZYVIZYlnhXeVupJyQ0dx1ggonlvvIZ
 3cgS2qzd8z2RxKzhnRDvjSfwy7gWFjqpljocyRP4osoWJybJu88MIUFK2GlPdc7x
 3UD/+R88FsIVsQuxzbwBuFZnP+Zo1JqCmspyX4sCeUBDNK4+MqOqIxBZry+q4qso
 usWrTofg2hfxS3FgUL0pQW5GF8JGm4uXcIjbe7fMi47GJ6Lp/ec=
 =rbAX
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20201005' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- generate unique mac address from SoC serial on S400 board
- Add USB support for GXL and AXG SoCs
- Update Gadget code to use the new GXL and AXG USB glue driver
- Add a VIM3 board support to add dynamic PCIe enable in OS DT
- Fix AXG pinmux with requesting GPIOs
- Add missing GPIOA_18 for AXG pinctrl
- Add Amlogic PWM driver
2020-10-06 08:36:10 -04:00
Tom Rini
b7e7831e5d Merge branch 'next'
Bring in the assorted changes that have been staged in the 'next' branch
prior to release.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-05 14:10:59 -04:00
Neil Armstrong
adbff64af7 board: amlogic: vim3: add support for dynamic PCIe enable
The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
an USB3.0 Type A connector and a M.2 Key M slot.
The PHY driving these differential lines is shared between
the USB3.0 controller and the PCIe Controller, thus only
a single controller can use it.

This adds this dynamic switching right before booting Linux
and the configuration steps in the boards documentation.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fixed warning by replacing min() by min_t()]
2020-10-05 17:59:45 +02:00
Tom Rini
26acc6395f Merge branch '2020-09-30-assorted-network-improvements' into next
- Generic UDP framework
- TFTP fixes
- dwc_eth_qos, smc911x, smc911x and mscc phy fixes
2020-10-01 09:46:10 -04:00
Pali Rohár
3dee18e2c2 arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell
Some Espressobin boards got assigned more than one MAC address. Update
instructions how to correctly store and preserve all MAC addresses.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andre Heider <a.heider@gmail.com>
2020-10-01 10:43:43 +02:00
Philippe Reynes
b43ea1bf18 net: add a generic udp protocol
This commit adds a generic udp protocol framework in the
network loop. So protocol based on udp may be implemented
without modifying the network loop (for example custom
wait magic packet).

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 16:55:03 -04:00
Etienne Carriere
4e5ce7ecd3 dt-bindings: arm: SCMI bindings documentation
Dump SCMI DT bindings documentation from Linux kernel source
tree v5.8-rc1.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-30 11:55:23 -04:00
Heinrich Schuchardt
08bff30d5d doc/sipeed/maix: describe RESET and BOOT button
In the boot flow description add the RESET and BOOT button as well as the
function of the DTR and RTS lines of the serial interface.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-30 08:54:31 +08:00
Heinrich Schuchardt
d53a95ba5e doc: correct kflash settings for Maix One Dock
The correct kflash parameter value for the Maix One Dock is "dan".

See:
https://github.com/sipeed/platform-kendryte210/blob/master/boards/sipeed-maix-one-dock.json#L22

Fixes: 137dc153fd ("doc: riscv: Update documentation for Sipeed MAIX boards")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-30 08:54:25 +08:00
Simon Glass
8c180d669a x86: edison: Add documentation for using am xFSTK image
Add a description of how to flash Edison using the xFSTK tool.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-25 11:27:29 +08:00
Simon Glass
70c202c480 x86: Add a way to add to the e820 memory table
Some boards want to reserve extra regions of memory. Add a 'chosen'
property to support this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-25 11:27:25 +08:00
Simon Glass
e4f09f97c9 x86: Add wake sources for the acpi_gpe driver
Some devices can wake the system from sleep, e.g opening the lid on a
clamshell or moving a USB mouse.

Add a wake to specify this for USB devices and add the settings for Apollo
Lake.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-25 11:27:15 +08:00
Simon Glass
fd42f263ce i2c: Add a generic driver to generate ACPI info
Many I2C devices produce roughly the same ACPI data with just things like
the GPIO/interrupt information being different.

This can be handled by a generic driver along with some information in the
device tree.

Add a generic i2c driver for this purpose.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-09-25 11:27:15 +08:00
Simon Glass
d9778ff0d3 cros: Add information about booting Chrome OS on x86
Recent versions of Chrome OS do not have a kernel in the root disk, to
save space.

With the improvements to the 'zboot' command it is fairly easy to load
the kernel from the raw partition. Add instructions on how to do this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-25 11:27:11 +08:00
Simon Glass
dc8e7a91f4 cros: Update chromium documentation
A few things have changed since this was written about 18 months ago.
Update the README.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-25 11:27:10 +08:00
Hou Zhiqiang
7fb568de53 net: tsec: Add the compatible string "gianfar" support
Add compatible string "gianfar" support and update the
device-tree-bindings doc.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Heinrich Schuchardt
4061191727 doc/build/gcc.rst: add missing apt-get *install*
The install command is missing for an apt-get command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-22 11:05:32 -04:00
Tom Rini
751b18b8a1 Merge branch 'master' into next
Merge in v2020.10-rc5
2020-09-21 14:25:37 -04:00
Wolfgang Wallner
674c58c7b7 x86: fsp: Replace e-mmc with emmc in devicetree bindings
The term eMMC is used inconsistently within the FSP devicetree
bindings (e-mmc and emmc), especially for "emmc-host-max-speed"
documentation and code disagree.

Change all eMMC instances within the FSP bindings to consistently
use "emmc". The term "emmc" is already used a lot within U-Boot,
while "e-mmc" is only used in the FSP bindings.

Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: correct one typo in the commit message]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-21 16:41:35 +08:00
Tom Rini
98f3ee09d0 ----------------------------------------------------------------
Fixes for 2020.10
 -----------------
 
 - Toradex boards
 - mx6qsabrelite: fix env offset
 - esdhc_imx: waiting for clock instead of sleep
 - dyn RAM calibration for entry point i.MX6
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/728274602
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCX2TCfQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZR+gCeNjYZE+RAT9U92vcyrBIPLGZvshEAn2eXc04a
 THdfLRCfQNAEQlpe0/tW
 =HF5v
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200918' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

----------------------------------------------------------------
Fixes for 2020.10
-----------------

- Toradex boards
- mx6qsabrelite: fix env offset
- esdhc_imx: waiting for clock instead of sleep
- dyn RAM calibration for entry point i.MX6

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/728274602
2020-09-18 10:42:12 -04:00
Philippe Schenker
bf46474e21 apalis-imx8qm: rename all occurences to apalis-imx8
The Toradex product is called apalis-imx8 consisting of SoM with
i.MX8QM and i.MX8QP SoCs.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17 14:41:33 +02:00