Commit graph

1180 commits

Author SHA1 Message Date
Priyanka Jain
2892ec5f43 powerpc/mpc85xx: Update LIODN entries for T1040
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:14 -08:00
Shaohui Xie
b24f6d401c powerpc/b4860qds: add workaround for XFI
XFI does not work stable on current board, it's due to heat sink issue,
to make it work stable the board needs additional heat sink, enable two
XFI lanes only. Right now we do not have such an erratum for the issue,
so use a define CONFIG_SYS_FSL_B4860QDS_XFI_ERR to identify it.
The workaround will only be used in XFI protocols and only if the
hwconfig indicates that XFI is prefered.

A new VSC3308 config function is used instead of re-use the original
function, to avoid making the function complex and ugly.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:13 -08:00
Shaveta Leekha
ffc1a87b91 85xx/b4860: Add alternate serdes protocols for B4860/B4420
Addded Alternate options with LC VCO for following protocols:
0x02 --> 0x01
0x08 --> 0x07
0x18 --> 0x17
0x1E --> 0x1D
0x49 --> 0x48
0x6F --> 0x6E
0x9A --> 0x99
0x9E --> 0x9D

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:12 -08:00
Zhao Qiang
e7f533cd59 powerpc/mpc85xx: modify erratum A007186
T2080 v1.0 has this errata while v1.1 has fixed
this errata by hardware, add a new function has_errata_a007186
to check the SVR_SOC_VER, SVR_MAJ and SVR_MIN first,
if the sil has errata a007186, then run the errata code,
if not, doesn't run the code.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:09 -08:00
Prabhakar Kushwaha
31530e0b8a board/t104xrdb: Conditional workaround of errata A-008044
Workaround of Errata A-008044 was implemented without errata number and it is
enabled by default. Errata A-008044 is only valid for T1040 Rev 1.0.

So put errata number and make it conditional.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:09 -08:00
Prabhakar Kushwaha
9f074e67f5 powerpc/mpc85xx:Put errata number for T104x NAND boot issue
When device is configured to load RCW from NAND flash IFC_A[16:31] are driven
low after RCW loading. Hence Devices connected on IFC_CS[1:7] and using
IFC_A[16:31] lines are not accessible.

Workaround is already in-place.
Put the errata number to adhere errata handling framework.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:08 -08:00
York Sun
14109c7a6a mpc85xx/t2080: Fix parsing DDR ratio for new revision
T2080 rev 1.1 changes MEM_RAT in RCW, which requires new parsing for ratio,
the same way as T4240 rev 2.0.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: Shengzhou Liu <Shengzhou.Liu@freescale.com>
2014-12-05 08:06:08 -08:00
Shengzhou Liu
2519cb344e powerpc/t2080: add serdes2 protocol 0x2e
Add serdes2 protocol 0x2e.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:07 -08:00
Tom Rini
85bafb6da4 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2014-11-26 11:23:26 -05:00
Tom Rini
21008ad638 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Conflicts:
	drivers/mmc/fsl_esdhc.c

Signed-off-by: Tom Rini <trini@ti.com>
2014-11-26 11:22:29 -05:00
Tom Rini
1fc4e6f486 Merge git://git.denx.de/u-boot-fdt 2014-11-26 11:21:14 -05:00
Nikhil Badola
f3dff695e1 drivers : usb: fsl: Implement usb Erratum A007798 workaround
Set TXFIFOTHRESH to adjust ddr pipeline delay for successful large
usb writes

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:27:04 -08:00
Masahiro Yamada
b41411954d linux/kernel.h: sync min, max, min3, max3 macros with Linux
U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does.  This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
 - Use min, max, min3, max3 only when the arguments have the same type
   (or add casts to the arguments)
 - Use min_t/max_t instead with the appropriate type for the first
   argument

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:48:30 -05:00
Nikhil Badola
c26c80a1a4 drivers: usb: fsl: Move USB Errata checking code
Move USB Errata checking code from "arch/powerpc" to architecture independent
file "fsl_usb.h" so that errata(s) become independent of the architecture.
For each erratum checking function for PPC arch, define a nop function for
non PPC arch for successful compilation in either case

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-21 09:28:28 -08:00
Simon Glass
e895a4b06f fdt: Allow ft_board_setup() to report failure
This function can fail if the device tree runs out of space. Rather than
silently booting with an incomplete device tree, allow the failure to be
detected.

Unfortunately this involves changing a lot of places in the code. I have
not changed behvaiour to return an error where one is not currently
returned, to avoid unexpected breakage.

Eventually it would be nice to allow boards to register functions to be
called to update the device tree. This would avoid all the many functions
to do this. However it's not clear yet if this should be done using driver
model or with a linker list. This work is left for later.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2014-11-21 04:43:15 +01:00
Masahiro Yamada
cba1da495d include: move various macros to include/linux/kernel.h
U-Boot has imported various utility macros from Linux
scattering them to various places without consistency.

In include/common.h are min, max, min3, max3, ARRAY_SIZE, ALIGN,
container_of, DIV_ROUND_UP, etc.
In include/linux/compat.h are min_t, max_t, round_up, round_down,
etc.
We also have duplicated defines of min_t in some *.c files.

Moreover, we are suffering from too cluttered include/common.h.

This commit moves various macros that originate in
include/linux/kernel.h of Linux to their original position.

Note:
This commit simply moves the macros; the macros roundup,
min, max, min2, max3, ARRAY_SIZE are different
from those of Linux at this point.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-20 11:28:25 -05:00
Tom Rini
f10834e166 Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx 2014-11-19 23:17:13 -05:00
Shengzhou Liu
c35f869394 net/fm: add 2.5G SGMII support
As auto-negotiation is not supported for 2.5G SGMII, we need
to add a new type PHY_INTERFACE_MODE_SGMII_2500 to differentiate
SGMII-1G and SGMII-2.5G with different setting for auto-negotiation.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-19 18:17:12 -08:00
Stefan Roese
5fc3494fdb powerpc: mpc52xx: Clear GD in the main U-Boot stage for SPL usage
When an MPC5200 based board is used with SPL support, the main
U-Boot needs to clear the GD (global data) struct again.

Otherwise the generic board init code in board_init_f (when
CONFIG_SYS_GENERIC_BOARD is defined) will not initialize all
GD variables correctly. Resulting in a hangup on the a4m2k
board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2014-11-19 13:08:14 +01:00
Dirk Eibach
50dcf89d90 mpc83xx: Add gdsys hrcon board
The gdsys hrcon board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.

On board peripherals include:
- 1x GbE (optional)
- Lattice ECP3 FPGA connected via eLBC and PCIe

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
2014-11-19 08:48:42 +01:00
Valentin Longchamp
e83a7e9453 powerpc/mpc83xx: Zero boot_flags arg for calling board_init_f()
The argument boot_flags of board_init_f() is not used at all in the
powerpc specific board.c init sequence. Now with the generic init
sequence, this boot_flags arg is used by board_init_f().

This patch sets the r3 register that is used to pass the boot_flags
argument from the start.S board_init_f() call to 0 prior to the function
call to avoid unknown content to end up in gd->flags.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-14 11:12:15 -08:00
Prabhakar Kushwaha
aa5a3d8d46 powerpc/mpc85xx: Use IFC accessor function
IFC registers can be of type Little Endian or big Endian depending upon
Freescale SoC. Here SoC defines the register type of IFC IP.

So use IFC acessor functions instead of in_be32().

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-14 11:12:14 -08:00
ramneek mehresh
a53dd53001 85xx/b4:Correct USB DR controller liodn entry
LIODN entry for B4860/B4420 mentions USB controller as "mph"
insread of "dr". This results in PAMU not permitting bus
transactions for USB DR controller on B4860 resulting in
USB function failure. Replacing "fsl-usb2-mph" with
"fsl-usb2-dr" allows USB DR controller bus transactions

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Reviewed-by: Sethi Varun-B16395 <Varun.Sethi@freescale.com>
Reviewed-by: Sun Yusong-R58495 <yorksun@freescale.com>
2014-11-14 11:12:13 -08:00
Shaohui Xie
ae6b458306 driver/net/fm/memac_phy: set NEG bit for external MDIOs
NEG bit default is '1' for external MDIOs as per FMAN-v3 RM, but on some
platforms, e.g. T2080QDS, this bit is '0', which leads to MDIO failure
on XAUI PHY, so set this bit definitely to align with the RM.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-14 11:12:13 -08:00
Shaohui Xie
ff5fb2a36d Fman/mEMAC: mEMAC fix for 10G MAC and PHY
1. use Payload length check disable when enable MAC;
2. add XGMII support for setting MAC interface mode;
3. only enable auto negotiation for Non-XGMII mode;
4. return 0xffff if clause 22 is used to read 10G phy_id;

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-By: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-14 11:12:13 -08:00
Nikita Kiryanov
ecfdcee5d9 powerpc: remove orphaned boards mcc200 and prs200
mcc200 and prs200 are old and have no maintainer. Remove the boards.

This also removes the mcc200 specific 1bpp BMP support from
common/lcd.c

Cc: Wolfgang Denk <wd@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: York Sun <yorksun@freescale.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2014-11-12 13:02:22 -05:00
Tom Rini
1e4b45c8f7 Merge branch 'master' of git://git.denx.de/u-boot-i2c 2014-11-10 16:25:29 -05:00
Dirk Eibach
b97cd6814e ppc4xx: Handle i2c stuck on combined xfer
ppc4xx i2c master gets stuck on errors while repeated start is
active. Can be easily reproduced by "i2c md" on an unpopulated
i2c address. There is not stop condition given, scl remains
pulled low.
The only way out seems to be doing a stop manually and then a
soft reset.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2014-11-10 06:44:30 +01:00
Wolfgang Denk
0060517ae0 cppcheck cleanup: fix nullPointer errors
There are a number of places where U-Boot intentionally and legally
accesses physical address 0x0000, for example when installing
exception vectors on systems where these are located in low memory.

Add "cppcheck-suppress nullPointer" comments to silence cppcheck
where this is intentional and legal.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2014-11-07 16:27:07 -05:00
Dirk Eibach
f73002bc01 ppc: Fix ppc4xx CONFIG_SYS_GENERIC_BOARD
I realized that with v2014.10 u-boot is not starting up on
ppc4xx boards with CONFIG_SYS_GENERIC_BOARD set.

I bisected it down to this:
d54d7eb support blackfin board initialization in generic board_f

With
d29437a ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARD
I set gd to a defined value for ppc4xx in cpu_init_f().
I did not realize that the gd struct has also to be memset()
to zero at this point.

But at least commit d54d7eb assumes it is:
@@ -516,11 +528,13 @@ static int reserve_malloc(void)
 /* (permanently) allocate a Board Info struct */
 static int reserve_board(void)
 {
-	gd->start_addr_sp -= sizeof(bd_t);
-	gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t));
-	memset(gd->bd, '\0', sizeof(bd_t));
-	debug("Reserving %zu Bytes for Board Info at: %08lx\n",
-			sizeof(bd_t), gd->start_addr_sp);
+	if (!gd->bd) {
+		gd->start_addr_sp -= sizeof(bd_t);
+		gd->bd = (bd_t *)map_sysmem(gd->start_addr_sp, sizeof(bd_t));
+		memset(gd->bd, '\0', sizeof(bd_t));
+		debug("Reserving %zu Bytes for Board Info at: %08lx\n",
+		      sizeof(bd_t), gd->start_addr_sp);
+	}
 	return 0;
 }
 #endif

This might also be an issue on other architectures, so maintainers should
check.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
2014-11-05 10:23:50 +01:00
Masahiro Yamada
b445c33a68 ppc/arm: remove remainders of dead boards in Kconfig
Commit d58a9451e7 (ppc/arm: zap EMK boards) removed
TOP* boards support but missed to remove entries in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
2014-10-31 00:42:19 +01:00
Wolfgang Denk
d58a9451e7 ppc/arm: zap EMK boards
The following bard configurations have been without active maintenance
for a long time, and the board maintainer agrees to have them removed:

MPC5200:	TOP5200, MINI5200, EVAL5200
MPC860:		TOP860
at91sam9xeXXX:	top9000eval_xe, top9000su_xe

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
[trini: Add missing Kconfig removals]
Signed-off-by: Tom Rini <trini@ti.com>
2014-10-28 12:48:31 -04:00
Masahiro Yamada
cf6bbe4c61 kconfig: add CONFIG_SUPPORT_TPL
CONFIG_TPL should not be enabled for boards that do not have TPL.
CONFIG_SUPPORT_TPL introduced by this commit should be "select"ed
by boards with TPL support and CONFIG_TPL should depend on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-27 17:54:10 -04:00
Masahiro Yamada
02627356b6 kconfig: add CONFIG_SUPPORT_SPL
CONFIG_SPL should not be enabled for boards that do not have SPL.
CONFIG_SUPPORT_SPL introduced by this commit should be "select"ed
by boards with SPL support and CONFIG_SPL should depend on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27 17:54:10 -04:00
Marek Vasut
f06f9a1fb1 ppc: Zap TQM8272 board
This board is old and is using CONFIG_I2C_X, which is wrong.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
2014-10-27 14:35:56 +01:00
Marek Vasut
ccc1950010 ppc: Zap TQM8260 board
This board is old and is using CONFIG_I2C_X, which is wrong.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
2014-10-27 14:35:56 +01:00
Marek Vasut
6afb3574c9 ppc: Zap IDS8247 board
This board is old and is using CONFIG_I2C_X, which is wrong.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
2014-10-27 14:35:56 +01:00
Marek Vasut
4109cb023f ppc: Zap HWW1U1A board
This is the only used of CONFIG_SPI_X macro, just zap this.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
2014-10-27 14:35:56 +01:00
Marek Vasut
5038d7f189 ppc: Zap Hymod board
Remove this board as this is the only one last user of eeprom_probe(),
which is pretty non-standard stuff.

This patch also removes all the PHP, SQL and CSS stuff from U-Boot,
which probably makes U-Boot a bit less IoT ;-)

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
2014-10-27 14:35:55 +01:00
Marek Vasut
1655f9f6c7 ppc: Zap MHPC board
This board uses eeprom accessors in an incorrect way. The board
is old and unsupported, just zap it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
2014-10-27 14:35:55 +01:00
Marek Vasut
4af5f0f3b4 ppc: Zap ICU862 board
This board is the only user of CONFIG_SYS_EEPROM_X40430 , remove
it so the EEPROM command code can be cleansed of the related code
as well.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
2014-10-27 14:35:55 +01:00
Wolfgang Denk
03b004074f PowerPC: drop some 74xx_7xx boards and related code
The file  board/Marvell/include/mv_gen_reg.h  is incompatible with
the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE
DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO
MARVELL" clause).  As this cannot be fixed, we remove the file and all
code that depends on it.  Fortunately this only affects some very old
boards that have long reached EOL:
	CPCI750
	DB64360
	DB64460
	p3m750
	p3m7448

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Roger Meier <r.meier@siemens.com>
2014-10-27 14:35:55 +01:00
Anatolij Gustschin
c6832a9635 powerpc: mpc512x: fix boot breakage
Commit d6b11fd1 (powerpc: remove MBX and MBX860T boards support)
removed mbxbar field in "struct sysconf512x" by mistake and broke
booting on mpc5121 boards. Fix it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-10-27 14:35:53 +01:00
Ruchika Gupta
7cad2e38d6 powerpc/mpc85xx: SECURE BOOT - Bypass PAMU in case of secure boot
By default, PAMU's (IOMMU) are enabled in case of secure boot.
Disable/bypass them once the control reaches the bootloader.

For non-secure boot, PAMU's are already bypassed in the default
SoC configuration.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16 14:17:42 -07:00
Ruchika Gupta
b9eebfade9 fsl_sec: Add hardware accelerated SHA256 and SHA1
SHA-256 and SHA-1 accelerated using SEC hardware in Freescale SoC's
The driver for SEC (CAAM) IP is based on linux drivers/crypto/caam.
The platforms needto add the MACRO CONFIG_FSL_CAAM inorder to
enable initialization of this hardware IP.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16 14:17:07 -07:00
Ruchika Gupta
028dbb8db1 fsl_sec : Change accessor function to take care of endianness
SEC registers can be of type Little Endian or big Endian depending upon
Freescale SoC. Here SoC defines the register type of SEC IP.

So update acessor functions with common SEC acessor functions to take care
both type of endianness.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16 14:16:50 -07:00
Ruchika Gupta
48ef0d2a10 fsl_sec : Move SEC CCSR definition to common include
Freescale SEC controller has been used for mpc8xxx. It will be used
for ARM-based SoC as well. This patch moves the CCSR defintion of
SEC to common include

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16 14:16:25 -07:00
Masahiro Yamada
af55e35d33 powerpc: mpc5xxx: remove board support for MVBC_P and MVSMR
These boards have been orphaned for more than 6 months.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-10 09:44:43 -04:00
Masahiro Yamada
e7a565638a powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7
These boards have been orphaned for more than 6 months.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-10 09:44:43 -04:00
Masahiro Yamada
9ed3246e19 powerpc: ppc4xx: remove board support for bluestone
This board has been orphaned for more than 6 months.

It is the last board defining CONFIG_APM821XX.
The code inside #ifdef CONFIG_APM821XX should be removed too.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-10 09:44:43 -04:00