Commit graph

526 commits

Author SHA1 Message Date
Kever Yang
c9ec5fe018 rockchip: clean makefile for misc.c
Use obj-$(config) instead of #ifdef $config to make the code looks
clean, and move the misc_init for U-Boot proper only.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Kever Yang
45f8b55eca rockchip: not depends on TPL_BUILD for rk3188 makefile including
The rk3188/Makefile already depends on !TPL_BUILD, so no need to add
this again in parent Makefile, remove it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Rohan Garg
0482538499 rockchip: rk3399: derive ethaddr from cpuid
Generate a MAC address based on the cpuid available in the efuse
block: Use the first 6 byte of the cpuid's SHA256 hash and set the
locally administered bits. Also ensure that the multicast bit is
cleared.

The MAC address is only generated and set if there is no ethaddr
present in the saved environment.

This is based off of Klaus Goger's work in 8adc9d

Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 18:15:31 +08:00
Kever Yang
cb8c492f20 rockchip: rk3288: remove fennec board support
Since there is no one using this board, remove it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 15:27:40 +08:00
Simon Glass
9fb625ce05 env: Move env_set() to env.h
Move env_set() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Kever Yang
3f47db0275 rockchip: Kconfig: enable TPL support for rk3328
Enable TPL support and some related option in Kconfig.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from commit 430b01462b with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:16:52 +08:00
Kever Yang
a9775a82a5 rockchip: rk3328: set DDR as non-secure in SPL
Set DDR as non-secure so that MMC DMA can access.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from bfe741ab9e and 73d952acc8 with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:05:02 +08:00
Kever Yang
26008cd42b rockchip: rv1108: Migrate to use common board file
Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:27:48 +08:00
Kever Yang
920b01388e rockchip: rk3399: Migrate to use common board file
Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:27:48 +08:00
Kever Yang
edaf8db866 rockchip: rk3368: Migrate to use common board file
Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:27:48 +08:00
Kever Yang
38ed26777f rockchip: rk3328: Migrate to use common board file
Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2019-07-29 10:27:48 +08:00
Kever Yang
de57a9fd4a rockchip: rk3288: Migrate to use common board file
Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:27:48 +08:00
Kever Yang
271318a660 rockchip: rk3288: Move rk3288_detect_reset_reason to soc file
The rk3288_detect_reset_reason() is per-SoC operation, move
it to rk3288.c, and extend the rk_board_late_init() with
rk3288_board_late_init() to make all the board works fine
as before.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:27:45 +08:00
Kever Yang
88a87bcbb3 rockchip: rk3288: Move clock CMD to SoC file
Move the do_clock CMD to rk3288.c so that we can re-use
the common board file later.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:27:11 +08:00
Kever Yang
b678f2790c rockchip: rk3288: Move veyron_init() back to veyron.c
The veyron_init() should go to its board file veyron.c,
and the board_early_init_f() could be the right place.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:41 +08:00
Kever Yang
0221910042 rockchip: rk3288: move board_early_init_f() back to veyron
The board_early_init_f() is only used by veyron board now,
move it into the board file veyron.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:41 +08:00
Kever Yang
1e7d2be011 rockchip: rk3288: move SOC setting into arch_cpu_init()
Qos setting and emmc relate SoC setting should go to arch_cpu_init().

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:41 +08:00
Kever Yang
a97b65a7a0 rockchip: rk3188: Migrate to use common board file
Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:41 +08:00
Kever Yang
c14fe2a8e1 rockchip: rk3188: Move SoC one time setting into arch_cpu_init()
The setting for noc remap should goto arch_cpu_init().

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:41 +08:00
Kever Yang
cca3b09147 rockchip: rk322x: Migrate to use common board file
Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:41 +08:00
Kever Yang
55cdcebc99 rockchip: rk322x: move SoC setting into arch_cpu_init()
The SoC one time setting should go to arch_cpu_init() in
rk322x.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:41 +08:00
Kever Yang
7e719d94a5 rockchip: rk3128: Migrate to use common board file
Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:41 +08:00
Kever Yang
c0c2a2e4a5 rockchip: rk3036: Migrate to use common board file
Use common board file for board_init() and board_late_init(),
for Rockchip SoCs have very similar process.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:41 +08:00
Kever Yang
7559f6e9f0 rockchip: rk3036: move dram_init() into soc file
Move dram_init() into rk3036.c so that we can use to common board
file later.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:41 +08:00
Kever Yang
5eb9a78fcd rockchip: sdram_common: add common dram_init_banksize
dram_init_banksize() can be common used by all SoCs, move it into
sdram_common.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:26:28 +08:00
Kever Yang
54f17fa05d rockchip: add common board file for U-Boot proper
Add common board file for Rockchip SoCs to avoid too much
copy-paste work for different SoCs.
This board file in charge for common board_init() and board_late_init()
in U-Boot proper.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
6c9a9df9f5 rockchip: clean up board_usb_init() for all SoCs
Use "snps,dwc2" for compatible name and and common variable
names so that we can share the common code for all SoCs.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
283e61a661 rockchip: convert to use ROCKCHIP_BOOT_MODE_REG for fastboot tag
The fastboot_set_reboot_flag() update a TAG into a register
for next boot, use the common macro for the register so that
we can re-use the function for different SoCs.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
604814c8dc rockchip: rk3328: add board_debug_uart_init()
Add board_debug_uart_init() to make the debug UART work with
correct setting.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
b7abef2ecb rockchip: rk3399: Migrate to use common spl board file
rk3399 has similar boot flow in SPL with other Rockchip SoCs,
migrate to use common spl board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
faa98c7c5a rockchip: rk3399: move chromebook bob specific flow to its board file
Add a board_early_init_f() in board_init_f() and move the board
specific init code into its own board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
4e1aeb89af rockchip: rk3399: move boot_devices into soc file
Move boot_devices definition into rk3399.c, so that we can
share the common code for board_spl_was_booted_from().

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
47b0ead21a rockchip: rk3399; move spl_board_init() into soc file
Move spl_board_init() into rk3399.c so that we can re-use the
common SPL board file later.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
bd06a7c88e rockchip: rk3399: move SoC setting into arch_cpu_init()
SoC setting like DDR secure region and EMMC clock setting
should go to arch_cpu_init().

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
08f7905bc6 rockchip: rk3399: show SPL BANNER earlier in board_init_f()
Show the SPL BANNER earlier so that we know already get into SPL.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
4238e526fa rockchip: rk3399: move spl_perform_fixups() into soc file
Move the spl_perform_fixups() into rk3399.c so that we can
use common spl board file later.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
4a395788c4 rockchip: rk3368: add boot_devices mapping to support 'same-as-spl'
The driver need a mapping to get the dts node by boot srouce ID.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
30d7109757 rockchip: rk3368: migrate to use common spl board file
rk3368 has similar boot flow in SPL with other Rockchip SoCs,
migrate to use common spl board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
612fd9e5e0 rockchip: rk3328: add boot_devices mapping to support 'same-as-spl'
The driver need a mapping to get the dts node by boot srouce ID.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
9cc67049c2 rockchip: rk3328: migrate to use common spl board file
rk3328 has similar boot flow in SPL with other Rockchip SoCs,
migrate to use common spl board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
8af6cafc89 rockchip: rk3288: add boot_devices mapping to support 'same-as-spl'
The driver need a mapping to get the dts node by boot srouce ID.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
60b13c8b4a rockchip: rk3288: Migrate to use common spl board file
rk3288 has similar boot flow in SPL with other Rockchip SoCs,
migrate to use common spl board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
f35c417c9b rockchip: rk3288: move dram_init_banksize() into soc file
Mov edram_init_banksize() into rk3288.c so that we can re-use
the common SPL board file later.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
8f5b5aac76 rockchip: rk3288-phycore: move phycore_init() to its own board file
phycore_init() is use for phycore board only, it should be move back
to phycore-rk3288.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
57d55db603 rockchip: rk3288: move setup_led() to firefly-rk3288
Only firefly-rk3288 has the dts node "u-boot,boot-led",
while CONFIG_SPL_LED is not enable, move code to firefly-rk3288
now in case someone need this code.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
4f0b061444 rockchip: rk3288: show SPL BANNER earlier in board_init_f()
Show the SPL BANNER earlier so that we know already get into SPL.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
66a503c700 rockchip: fit_spl_optee: rockchip: fix warning unit_address_vs_reg
Update to fix warning:
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot@1
has a unit name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/optee@1
has a unit name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt@1
has a unit name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /configurations/conf@1
has a unit name, but no reg property

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
a49660b658 rockchip: rk322x: add boot_devices mapping to support 'same-as-spl'
The driver need a mapping to get the dts node by boot srouce ID.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
0cd65e4b9a rockchip: rk322x: migrate to use common spl board file
rk322x has similar boot flow in SPL with other Rockchip SoCs,
migrate to use common spl board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
7dc79f8af0 rockchip: rk322x: introduce arch_cpu_init() for SoC setting init
Use arch_cpu_init() to init SoC secure region and move it to
rk322x.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
4eb506322e rockchip: rk3188: migrate to use common spl board file
rk3188 has similar boot flow in SPL with other Rockchip SoCs,
migrate to use common spl board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
3b3c623e61 rockchip: rk3188: add boot_devices mapping to support 'same-as-spl'
The driver need a mapping to get the dts node by boot srouce ID.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
9323ffafc9 rockchip: rk3188: move spl_board_init() into rk3188.c
Clean up the rk3188.c so that we can re-use the common spl board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
bf1133b1e9 rockchip: Migrate to use BOOTROM_SUPPORT driver
SPL bootrom support is a boot device just like mmc and etc,
use formal boot device instead of jump to bootrom directly.
Enable the Kconfig by default if ROCKCHIP_BACK_TO_BROM is enabled.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
4dd4fc32db rockchip: rk3188: move usb uart init into arch_cpu_init()
The SoC feature init will be better to use arch_cpu_init() and
goes to soc file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
84a6a27ae3 rockchip: rk3188: init CPU freq in clock driver
Init CPU frquency in clock driver instead of in SPL board file,
this will help for use common board file later.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
49105fb7ed rockchip: add common spl board file
The common spl board file handles board_init_f() in SPL,
and with board_early_init_f() and arch_cpu_init() callback,
other operateion after board_init_f() should go to board specific
spl_board_init().

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
cd59501f21 rockchip: intruduce common BROM_BOOTSOURCE_ID_ADDR
The boot source from BootRom is store at a fix offset of IRAM,
update to use the common macro instead of rk3399 specific one.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-26 17:30:26 +08:00
Chris Webb
89e3917230 rockchip: TPL banner should depend on CONFIG_TPL_BANNER_PRINT
The generic code in common/spl/spl.c allows TPL/SPL banners to be
silenced by unsetting CONFIG_TPL_BANNER_PRINT or CONFIG_SPL_BANNER_PRINT
respectively. However, arch/arm/mach-rockchip/tpl.c prints this banner
unconditionally.

Fix the rockchip-specific tpl.c so that the TPL banner depends on
CONFIG_TPL_BANNER_PRINT in the same way as the generic code.

Signed-off-by: <chris@arachsys.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-22 21:52:59 +08:00
Chris Webb
58fcb03e67 rockchip: Fix TPL build without CONFIG_TPL_SERIAL_SUPPORT
If CONFIG_DEBUG_UART is set but CONFIG_TPL_SERIAL_SUPPORT is not, the
serial output should be available in SPL and full U-Boot, but not built
in TPL. However, the rockchip tpl.c instead fails to compile with
undefined references to the debug UART.

Instead, initialise the debug UART and print the TPL banner only if both
CONFIG_DEBUG_UART and CONFIG_TPL_SERIAL_SUPPORT are set.

Signed-off-by: <chris@arachsys.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-22 21:52:59 +08:00
Chris Webb
f05d574356 rockchip: make_fit_atf.py: Eliminate pyelftools dependency
make_fit_aft.py depends on the non-standard library pyelftools to pull
out PT_LOAD segments from ELF files. However, this is as easy to do
manually, without imposing the extra dependency on users.

Structures in the ELF file are unpacked into variables named to exactly
match the ELF spec to ensure the destructuring code is reasonably
self-documenting.

Signed-off-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
fb7b1b79c1 rockchip: enable rk322x TPL_BOOTROM_SUPPORT in Kconfig
The TPL_BOOTROM_SUPPORT is needed for boot from bootrom like
other storages.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
2738181eb9 rockchip: rk3399: use common TPL board file
Use common tpl.c instead of rk3399-board-tpl.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
682a99c634 rockchip: rk3399: remove TPL_BOARD_INIT
RK3399 TPL do not need a dedicate board init, print the firmware
info when debug init instead.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
87ac550862 rockchip: rk3399: use common secure_timer_init() for spl/tpl
SPL/TPL share the same secure_timer_init(), update to use
one copy source code and update to use CONFIG_ROCKCHIP_STIMER_BASE
as base address and rename to function name to rockchip_stimer_init().

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
82560cb311 rockchip: rk3368: use common TPL board file
Use common tpl.c instead of rk3368-board-tpl.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
3338f544b1 rockchip: rk3288: use common TPL board file
Use Common tpl.c instead of rk3288-board-tpl.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
6ae28a30e9 rockchip: rk322x: use common TPL board file
Use Common tpl.c instead of rk322x-board-tpl.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
18f85080eb rockchip: add common tpl board file
Rockchip SoCs have similar boot process, prefer to use TPL for DRAM
init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL
common board is a basic TPL board init which can be shared for most
of SoCs to avoid copy-pase for different SoCs.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
192445b39c rockchip: rk3368: enable stimer for rk3368
Add stimer_init() for spl/tpl so that we able to switch
to use arch timer.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
1f6b599b6d rockchip: rk3368: move sgrf init to spl as arch_cpu_init()
The SoC related init will move to SPL and keep TPL clean,
so that we can reuse the common TPL board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
0845a0ee66 rockchip: remove rk_timer
We have convert all SoC to use DM timer or ARM arch/generic
timer, we can remove this rk_timer now.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
243f48b803 rockchip: remove no use header file in board code
The timer.h is no use any more, remove it from the board files.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
1e72a757bb rockchip: rk3128: use ARM arch timer instead of rk_timer
We prefer to use ARM arch timer instead of rockchip timer, so that
we are using the same timer for SPL, U-Boot and Kernel, which will
make things simple and easy to track to boot time.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
ae5a3659f3 rockchip: rk3288: use ARM arch timer instead of rk_timer
We prefer to use ARM arch timer instead of rockchip timer, so that
we are using the same timer for SPL, U-Boot and Kernel, which will
make things simple and easy to track to boot time.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
002d897fb1 rockchip: rk3036: use ARM arch timer instead of rk_timer
We prefer to use ARM arch timer instead of rockchip timer, so that
we are using the same timer for SPL, U-Boot and Kernel, which will
make things simple and easy to track the boot time.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
19d0de3ee4 rockchip: rk3036: sdram: use udelay instead of rockchip_udelay
Use system api for udelay instead of vendor defined api,
and rockchip_udelay() will be removed.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
acea123825 rockchip: rk322x: use ARM arch timer instead of rk_timer
We prefer to use ARM arch timer instead of rockchip timer, so that
we are using the same timer for SPL, U-Boot and Kernel, which will
make things simple and easy to track to boot time.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
b39ab7f1e1 rockchip: rk3288: dts: enable spl-boot-order
We share the same default SPL boot order for all rk3288 boards,
use dts instead of hard code in board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
032906a858 rockchip: spl-boot-order: update dependency to OF_LIBFDT
The fdt interfaces are actuall depends on OF_LIBFDT instead
of OF_CONTROL, some boards may enable OF_CONTROL while disable
OF_LIBFDT.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
ccdcdbb507 rockchip: rk3288: enable TPL for evb-rk3288
Enable TPL for evb-rk3288 so that we can have a free size limited
SPL.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
443fe40e8b rockchip: rk3288: add default TPL_LDSCRIPT value in Kconfig
We share the same TPL_LDSCRIPT for all rk3288 board, add
default value in Kconfig.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
25c6173099 rockchip: rk3288: move configure_l2ctlr back to rk3288
The configure_l2ctlr() is used only by rk3288, do not need to
locate in sys_proto.h

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
ccab9e7ee3 rockchip: rk3288: add arch_cpu_init in spl
Add arch_cpu_init() in SPL for soc related init, and
move configure_l2ctlr() into it.
The arch_cpu_init() only need to run once, so no need
to run in TPL.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
d7f2d23ce4 rockchip: rk3368: default enable SPL LIBCOMMON and LIBGENERIC
We needs SPL LIBCOMMON and LIBGENERIC for all boards,
so we can enable them by default and no need to define
in each board.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
1cdb614845 rockchip: rk322x: default enable SPL LIBCOMMON and LIBGENERIC
We needs SPL LIBCOMMON and LIBGENERIC for all boards,
so we can enable them by default and no need to define
in each board.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
747e127535 rockchip: rk3328: default enable SPL LIBCOMMON and LIBGENERIC
We needs SPL LIBCOMMON and LIBGENERIC for all boards,
so we can enable them by default and no need to define
in each board.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
a13f870ad4 rockchip: rk3399: default enable SPL LIBCOMMON and LIBGENERIC
We needs SPL LIBCOMMON and LIBGENERIC for all boards,
so we can enable them by default and no need to define
in each board.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
8ef62a4aab rockchip: rk3368: use defaule value for SYS_MALLOC_F_LEN
There is no difference in rk3368 board use for SYS_MALLOC_F_LEN,
so we can use default value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
cb32a91fbf rockchip: rk3328: use defaule value for SYS_MALLOC_F_LEN
There is no difference in rk3328 board use for SYS_MALLOC_F_LEN,
so we can use default value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
d0ae3bc4d6 rockchip: rk3399: use default value for SYS_MALLOC_F_LEN
There is no difference in rk3399 board use for SYS_MALLOC_F_LEN,
so we can use default value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
9489b5c7ba rockchip: rk3288: use default value for SYS_MALLOC_F_LEN
There is no difference in rk3288 board use for SYS_MALLOC_F_LEN,
so we can use default value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
e3d83d8e54 rockchip: rk322x: use defconfig for SYS_MALLOC_F_LEN
There is no difference in rk322x board use for SYS_MALLOC_F_LEN,
so we can use default value.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
476dcb6b43 rockchip: Kconfig: move ROCKCHIP_BOOT_MODE_REG to soc Kconfig
Rockchip SoCs have different ROCKCHIP_BOOT_MODE_REG value,
move it to SoC's own Kconfig, and add address for rk3128 and
rk3328 so that all SoCs have available address.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
c83b5a2c53 rockchip: Kconfig: move rk3399 config into its Kconfig
Each SoC have its config setting and its Kconfig, move
the specific setting to its own Kconfig file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
97fd39c69e rockchip: Kconfig: move rk3368 config into its Kconfig
Each SoC have its config setting and its Kconfig, move
the specific setting to its own Kconfig file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
5959126771 rockchip: Kconfig: move rk3288 config into its Kconfig
Each SoC have its config setting and its Kconfig, move
the specific setting to its own Kconfig file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
45c1d34157 rockchip: Kconfig: move rk322x config into its Kconfig
Each SoC have its config setting and its Kconfig, move
the specific setting to its own Kconfig file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
5e283876f1 rockchip: fixup board choice in Kconfig
Kconfig for board target select is choice option, fixup for
rk3036, rk3288 and rv1108.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
c8851c9d18 rockchip: remove redundant pinctrl header including
No code is using this header file, remove it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
0e9802095d rockchip: rk3288: remove pinctrl init in spl_board_init
The pinctrl will default init the io while driver is probe
with new pinctrl driver.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
fcb1964a5e rockchip: rk3188: remove pinctrl init in spl_board_init
The pinctrl will default init the io while driver is probe
with new pinctrl driver.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
7958a85bca rockchip: rk3399: remove pinctrl init in spl_board_init
The pinctrl will default init the io while driver is probe
with new pinctrl driver.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Jagan Teki
845a31ea2c rockchip: rk3399: syscon: Add pmu support
Add pmu compatible with relevant U_BOOT_DRIVER for rk3399
via syscon rk3399 driver.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: YouMin Chen <cym@rock-chips.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21 00:00:17 +08:00
Andy Yan
619f002db8 rockchip: make_fit_atf.py: fix loadables property set error
Commit b238e4b00c ("rockchip: Cleanup of make_fit_atf.py.") set
firmware = "atf_1";
loadables = "uboot","atf_1","atf_2";

Actually it should be:
firmware = "atf_1";
loadables = "uboot","atf_2","atf_3";

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-05 15:57:52 +08:00
Kever Yang
665ebcadd6 rockchip: rk3288: enable TPL for tinker-board
All the config for TPL has been update, we can enable the TPL.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Kever Yang
45290847df rockchip: rk3288: add separate TPL STACK address
TPL is at SRAM while other stage is at SDRAM, so it needs
separate STACK.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-02 11:49:49 +08:00
Kever Yang
d18ca747b6 rockchip: rk3288: enable TPL configs to chip level
More boards other than vyasa needs TPL, so enable the TPL configs
at chip level instead of board level.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Jagan Teki
4977cf67de rockchip: rk3399: Enable TPL_BOARD_INIT
Enable TPL_BOARD_INIT, this would help us to show
TPL boot prints.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:29 +08:00
Jagan Teki
97d98e6bbf rockchip: rk3399: tpl: Mark printascii into debug
Now, we have spl_board_init which has TPL banner prints.

So mark the 'U-Boot TPL board init' print into debug.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:29 +08:00
Jagan Teki
c997c0fc28 rockchip: rk3399: tpl: Add spl_board_init
Add spl_board_init for TPL, that have TPL banner will help
to print tpl boot prints.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:28 +08:00
Jagan Teki
adde32d033 rockchip: rk3399: Enable SPL_BOARD_INIT
Enable SPL_BOARD_INIT globally to rk3399, this would
help to print the SPL banner during bootup.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:28 +08:00
Jagan Teki
5e7216462b rockchip: rk3399: spl: Mark printascii into debug
Now, we have spl_board_init with preloader_console_init that
indeed show SPL banner.

So mark the 'U-Boot SPL board init' print into debug.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:28 +08:00
Jagan Teki
07586ee432 rockchip: rk3399: Support common spl_board_init
Support common spl_board_init by moving code from puma
board file into, common rk3399-board-spl.c.

Part of the code has sysreset-gpio, regulators_enable_boot_on
but right now only puma board is using this with relevant
config options rest remains common for all targets.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:28 +08:00
Jagan Teki
96070460c3 rockchip: rk3399: Get bl31.elf via BL31
Right now rockchip platform need to copy bl31.elf into u-boot
source directory to make use of building u-boot.itb.

So, add environment variable BL31 like Allwinner SoC so-that the
bl31.elf would available via BL31.

If the builds are not exporting BL31 env, the make_fit_atf.py
explicitly create dummy bl31.elf in u-boot root directory to
satisfy travis builds and it will show the warning on console as

 WARNING: BL31 file bl31.elf NOT found, resulting binary is non-functional
 WARNING: Please read Building section in doc/README.rockchip

Note, that the dummy bl31 files were created during not exporting
BL31 case would be removed via clean target in Makefile.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-26 21:11:27 +08:00
Kever Yang
c009aeb8ca rockchip: Kconfig: enable SPL support for rk3328
Enable SPL support and some related option in Kconfig.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from 430b01462b with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2019-06-26 21:11:26 +08:00
Kever Yang
661519e5c5 rockchip: rk3328: add SPL board file support
rk3328 SPL is locate at dram, so do not have strict size limit,
suppose to enable storage media controller driver, load ATF and
U-Boot, then boot into ATF.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from 4ebe3968b6 with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:26 +08:00
Heinrich Schuchardt
6a853dbcc0 lib: time: export usec_to_tick()
In the UEFI Stall() boottime service we need access to usec_to_tick().

Export the function.

Remove redundant implementation in arch/arm/mach-rockchip/rk_timer.c.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-04 22:09:26 +02:00
Christoph Muellner
b238e4b00c rockchip: Cleanup of make_fit_atf.py.
This patch cleans up make_fit_atf.py in the following way:

* Fix all issues reported by pylint
* Move copyright notice from file-to-generate to script
* Fix of-by-one bugs in loadables property
* Remove commented-out (dead) code.

Besides the bugfix no intended changes.

Tested on RK3399-Q7 with TF-A v2.1 as BL31.

Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30 18:22:35 +08:00
Christoph Muellner
78a1ac33cb rockchip: rk3399: Add option to print on UART3.
The RK3399 SPL does not use a pinctrl driver to setup the UART pins.
Instead it works based on config macros, which set the base address
of the actual UART block.

Currently the RK3399 SPL support UART0 and UART2.
This patch adds UART3 in the same way as UART0.

Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30 18:22:35 +08:00
Trevor Woerner
1001502545 CONFIG_SPL_SYS_[DI]CACHE_OFF: add
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18 08:15:35 -04:00
Jagan Teki
2666bd42c6 arm: rockchip: rk3399: Move common configs in Kconfig
Few SPL and U-Boot proper configs are common to all rk3399 target
defconfigs, move them and select it from platform kconfig.

Moved configs:
-  SPL_ATF
-  SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
-  SPL_LOAD_FIT
-  SPL_CLK if SPL
-  SPL_PINCTRL if SPL
-  SPL_RAM if SPL
-  SPL_REGMAP if SPL
-  SPL_SYSCON if SPL
-  CLK
-  FIT
-  PINCTRL
-  RAM
-  REGMAP
-  SYSCON
-  DM_PMIC
-  DM_REGULATOR_FIXED

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:13 +08:00
Kever Yang
6bbf5e1a94 rockchip: rk3399: add tpl support
Rockchip platform suppose to use TPL(run in SRAM) as dram init and
SPL(run in DDR SDRAM) as pre-loader, so that the SPL would not be
limited by SRAM size.
This patch add rk3399-board-tpl.c and its common configs.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Kever Yang
3cbec0ad09 rockchip: add u-boot-tpl-v8.lds
We don't have both sram and sdram in TPL, so update from:
arch/arm/cpu/armv8/u-boot-spl.lds

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-08 17:34:12 +08:00
Kever Yang
6459e7f588 rockchip: rk3368: remove uart iomux init in SPL
The iomux should have been set in board_debug_uart_init(),
do not set in board_init_f(), remove it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Kever Yang
579a168466 rockchip: rk3368: support UART2/4 in board_debug_uart_init()
evb-rk3368 is using UART2 and PX5 evb is using UART4

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Andy Yan <andy.yan@rock-chips.com>
2019-05-08 17:34:12 +08:00
Kever Yang
c34643e0db rockchip: rk322x: add tpl support
Move original spl to tpl, and add spl to load next stage firmware,
adapt all the address and option for them.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Philipp Tomsich
dd320e122f rockchip: rk3288: include header for back_to_bootrom
To avoid a warning, we need to include the header defining
back_to_bootrom for us.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:59 +02:00
Philipp Tomsich
8c5805a210 rockchip: rk3399: include gpio.h
After applying the series for debug_uart_init(), Travis-CI reports:

arch/arm/mach-rockchip/rk3399/rk3399.c:90:2: error: implicit declaration of function 'spl_gpio_set_pull' [-Werror=implicit-function-declaration]
  spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
  ^~~~~~~~~~~~~~~~~

This is caused by a missing header-file include.  Fix it.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:59 +02:00
Kever Yang
c79bce16e5 rockchip: rk3399: add board_debug_uart_init()
Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file for all rockchip SoCs later.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:59 +02:00
Kever Yang
f9e8145614 rockchip: rk3399: use grf structure to access reg
Prefer to use structure to access register if we could.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:58 +02:00
Kever Yang
6a03335714 rockchip: rk3368: move board_debug_uart_init() to rk3368.c
Move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file later for all rockchip SoCs.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:58 +02:00
Kever Yang
e83e885e53 rockchip: rk3288: add board_debug_uart_init()
Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file for all rockchip SoCs later.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:58 +02:00
Kever Yang
070e48b30e rockchip: rk3288: use grf structure to access soc_con2
Prefer to use structure to access register if we can.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:58 +02:00
Kever Yang
28fe4d5b30 rockchip: rk322x: move board_debug_uart_init() to rk322x.c
Move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file later for all rockchip SoCs.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[Fixed up header-list to not break FASTBOOT:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:58 +02:00
Kever Yang
86d0eca451 rockchip: rk3188: add board_debug_uart_init()
Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:58 +02:00
Kever Yang
7f3eec03d5 rockchip: rk3036: add board_debug_uart_init()
Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[Fixed whitespace error:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:58 +02:00
Kever Yang
b0a569da08 rockchip: enable DEBUG_UART_BOARD_INIT by default
All Rockchip SoCs use DEBUG_UART_BOARD_INIT to init per board
UART IOMUX, enable it by default.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:06 +02:00
Kever Yang
b1b449bf1f rockchip: correct ARCH_SOC name
The ARCH_SOC name default as 'rockchip' and we put all the
header file in 'arch/arm/include/asm/arch-rockchip/', but
the 'rockchip' is not the SOC name, let's correct it after
we update all the source file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsiich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Kever Yang
15f09a1a83 rockchip: use 'arch-rockchip' as header file path
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common
header file path, so that we can get the correct path directly.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Urja Rannikko
59ef021b99 rk3288-board: remove pinctrl call for debug uart
This failed and caused a boot failure on c201, and afaik
the pins should be setup by the new pinctrl driver.

Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Philipp Tomsich
a2893baa47 Revert "rockchip: Drop call to rockchip_dnl_mode_check() for now"
Due to a final resolution not coming up in time for 2019.04 and
following the consensus on the discussion, we'll keep this around
for 2019.04 after all.

This reverts commit 0d968ceb1f.
2019-03-29 09:21:13 +01:00
Philipp Tomsich
73ced87e9a rockchip: rk3399: spl: ensure that debug_uart_init is called
With the latest changes to add support for the Chromebook Bob,
initialisation through debug_uart_init() did no longer get called for
other targets.

Fix this, by moving debug_uart_init() out of the Bob-specific

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:14 +01:00
Simon Glass
9e92116bc8 rockchip: Add support for chromebook_bob
Bob is a 10-inch chromebook produced by Asus. It has two USB 3.0 type-C
ports, 4GB of SDRAM, WiFi and a 1280x800 display. It uses its USB ports
for both power and external display. It includes a Chrome OS EC
(Cortex-M3) to provide access to the keyboard and battery functions.

Support so far includes only:
- UART
- SDRAM
- MMC, SD card
- Cros EC (but not keyboard)

Not included:
- Keyboard
- Display
- Sound
- USB
- TPM

Bob is quite similar to Kevin, the Samsung Chromebook Plus, but support
for this is not provided in this series.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
c35f8e5017 rockchip: Tidy up board include-file ordering
These board files have inconsistent #include ordering. Fix them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
Simon Glass
3523c07867 rockchip: Allow booting from SPI
The u-boot,spl-boot-device property only allows MMC at present. Add SPI as
well for boards that boot from SPI flash.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:13 +01:00
David Wu
08c817c399 ARM: rockchip: Remove the pinctrl request at rk3288-board-spl
If we use the new pinctrl driver, the pinctrl setup will be done
by device probe. Remove the pinctrl setup at rk3288-board-spl.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:11 +01:00
David Wu
bfb11abef2 ARM: rockchip: Kconfig: Remove the SPL_PINCTRL for rk3188
It seems that pinctrl is not requested for rk3188 SPL, remove it so
that can save more space for SPL image size.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:11 +01:00
David Wu
c0b163e908 ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL
When the boot ROM sets up MMC we don't need to do it again. Remove the
MMC setup code entirely, but we also need to enable uart for debug message.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:11 +01:00
Marty E. Plummer
8e2e601c5f rockchip: add support for veyron-speedy (ASUS Chromebook C201)
This adds support for the ASUS C201, a RK3288-based clamshell
device. The device tree comes from linus's linux tree at
3f16503b7d2274ac8cbab11163047ac0b4c66cfe. The SDRAM parameters
are for 4GB Samsung LPDDR3, decoded from coreboot's
src/mainboard/google/veyron/sdram_inf/sdram-lpddr3-samsung-4GB.inc

Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01 16:59:10 +01:00