Commit graph

617 commits

Author SHA1 Message Date
Chris Packham
9b23c73d5e net: Add Kconfig option for BOOTP_NTPSERVER
Add a Kconfig option for BOOTP_NTPSERVER to enable the DHCP/BOOTP option
to configure the sntp server address.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-14 21:28:38 -04:00
Tom Rini
f739fcd831 SPDX: Convert a few files that were missed before
As part of the main conversion a few files were missed.  These files had
additional whitespace after the '*' and before the SPDX tag and my
previous regex was too strict.  This time I did a grep for all SPDX tags
and then filtered out anything that matched the correct styles.

Fixes: 83d290c56f ("SPDX: Convert all of our single license tags to Linux Kernel style")
Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-10 20:38:35 -04:00
Neil Armstrong
051ebe3228 cmd: add ADC cli commands
Add an 'adc' cli command to get information from adc devices and to read
"single shot" data.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-05-08 18:50:23 -04:00
Michalis Pappas
666028fc7c arm64: Add SMC and HVC commands
This patch adds smc and hvc commands, that allow issuing Secure Monitor
Calls and Hypervisor Calls conforming to the ARM SMC Calling Convention.

Add Kconfig items to allow each command can be individually enabled.

Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-08 09:07:35 -04:00
Jassi Brar
732bc7ce3f mmc: support writing sparse images
Provide an alternate path for sparse-images to be
written to MMC. For example, via tftp on platforms
that don't support fastboot protocol. Or when an
image is to written at some offset, rather than the
start of a partition.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
[trini: Guard with CONFIG_FASTBOOT_FLASH tests, use LBAF for lbaint_t
        printing]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-08 09:06:33 -04:00
Michal Simek
4bbd6b1d94 arm: v7R: Add initial support
The Cortex-R* processors are a mid-range CPUs for use in deeply-embedded,
real-time systems. It implements the ARMv7-R architecture, and includes
Thumb-2 technology for optimum code density and processing throughput.

Except for MPU(Memory Protection Unit) and few CP15 registers, most of the
features are compatible with v7 architecture. So,reuse the same armv7
folder and introduce a new config CPU_V7R in order to differentiate
from v7 based platforms.

Tested-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-05-07 15:53:28 -04:00
Lokesh Vutla
acf1500138 arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A
Currently CPU_V7 kconfig symbol supports only ARMv7A architectures under
armv7 folder. This led to a misconception of creating separate folders
for armv7m and armv7r. There is no reason to create separate folder for
other armv7 based architectures when it can co-exist with few Kconfig
symbols.

As a first step towards a common folder, rename CPU_V7 as CPUV7A. Later
separate Kconfig symbols can be added for CPU_V7R and CPU_V7M and
can co exist in the same folder.

Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-05-07 15:53:24 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Heinrich Schuchardt
83a1f933d1 cmd: CONFIG_CMD_LOG select CONFIG_LOG
CONFIG_CMD_LOG without CONFIG_LOG leads to a build error:
‘gd_t {aka volatile struct global_data}’ has no member named
‘default_log_level’

So CMD_LOG should select LOG.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-28 10:42:35 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Adam Ford
f1b1f77060 Convert CONFIG_SPI to Kconfig
This converts the following to Kconfig:
   CONFIG_SPI

This partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver.  For now, just update
the CONFIG tests.  This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:11 -04:00
Michal Simek
ebc675b98d cmd: clk: Check return value from soc_clk_dump
In case of error in soc_clk_dump function are returned different values
then CMD return values (-1, 0, 1).

For example:
ZynqMP> clk dump
exit not allowed from main input shel

The patch is checking all negative return values and return
CMD_RET_FAILURE which is proper reaction for these cases.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23 13:15:32 +02:00
Bin Meng
79c584e559 bootvx: x86: Assign bootaddr based on kernel memory base
On VxWorks x86 its bootline address is at a pre-defined offset @
0x1200. If 'bootaddr' is not passed via environment variable, we
assign its value based on the kernel memory base address.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-04-16 22:38:53 +08:00
Bin Meng
ced71a2f72 bootvx: Exit if bootline address is not specified
Exit the 'bootvx' command if bootline address is not specified.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-04-16 22:38:53 +08:00
Bin Meng
7824ad6ad4 bootvx: Refactor the bootline copy codes a little bit
There is a small duplication in do_bootvx() that does the bootline
copy. Refactor this a little bit to make it simpler.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-16 22:38:52 +08:00
Bin Meng
447ae4f7ad bootvx: x86: Make VxWorks EFI console driver happy
When booting from EFI BIOS, VxWorks bootloader stores the EFI GOP
framebuffer info at a pre-defined offset @ 0x6100. When VxWorks
kernel boots up, its EFI console driver tries to find such a block
and if the signature matches, the framebuffer information will be
used to initialize the driver.

However it is not necessary to prepare an EFI environment for
VxWorks's EFI console driver to function (eg: EFI loader in
U-Boot). If U-Boot has already initialized the graphics card and
set it to a VESA mode that is compatible with EFI GOP, we can
simply prepare such a block for VxWorks.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-16 22:38:52 +08:00
Bin Meng
839c4e9c5b elf: Add a very simple ELF64 loader
This adds a very simple ELF64 loader via program headers, similar
to load_elf_image_phdr() that we already have.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-16 16:54:51 +08:00
Bin Meng
45519924a0 x86: Rename e820entry to e820_entry
This changes 'struct e820entry' to 'struct e820_entry' to conform
with the coding style.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2018-04-16 16:54:51 +08:00
Bin Meng
fa5e91f778 vxworks: x86: Rename e820info to e820_info
This changes 'struct e820info' to 'struct e820_info' to conform
with the coding style.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2018-04-16 16:54:51 +08:00
Bin Meng
1351700cf2 bootvx: x86: Explicitly clear the bootloader image size
VxWorks bootloader stores its size at a pre-defined offset @ 0x5004.
Later when VxWorks kernel boots up and system memory information is
retrieved from the E820 table, the bootloader size will be subtracted
from the total system memory size to calculate the size of available
memory for the OS.

Explicitly clear the bootloader image size otherwise if memory
at this offset happens to contain some garbage data, the final
available memory size for the kernel is insane.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-16 16:54:51 +08:00
Bin Meng
2902be86c1 bootvx: x86: Prepare e820 related stuff from the given kernel memory base address
At present two environment variables 'e820data'/'e820info' are required
to boot a VxWorks x86 kernel, but this is superfluous. The offset of
these two tables are actually at a fixed offset from the kernel memory
base address and we can provide the kernel memory base address to U-Boot
via only one variable 'vx_phys_mem_base'.

Note as it name indicates, the physical address should be provided.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2018-04-16 16:54:51 +08:00
Tom Rini
df13a44377 Merge git://git.denx.de/u-boot-net 2018-04-15 08:42:37 -04:00
Vasyl Vavrychuk
3194daa10b vxworks: fixed cpu enable using PSCI on armv8
Without armv8_setup_psci register VBAR_EL3 is not set up property which
makes SMC calls jump to invalid location.

smp_kick_all_cpus is required to make slave cpus leave gic_wait_for_interrupt.
Without this they will never pursue booting process.

Fix was applied to the two ways of booting VxWorks: bootvx and bootm commands.

This implementation is very similar to what is done in boot_jump_linux
in arch/arm/lib/bootm.c file.

Tested on VxWorks 7 release SR0520 2017-12-08 Intel Stratix 10 SX SoC
Development Kit board.

Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@globallogic.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-04-13 17:06:05 -04:00
Joe Hershberger
092f2f35b5 Revert "Kconfig: cmd: Make networking command dependent on NET"
This reverts the parts of commit 3b3ea2c56e
where it changed the EFI dependency on NET.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 15:48:34 -05:00
Joe Hershberger
3dfbc53bd6 net: Make the BOOTP options default
The BOOTP options used to be and should still be default for all boards
with CMD_NET enabled. One should not be forced to use DISTRO_DEFAULTS to
get them.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 15:48:25 -05:00
Joe Hershberger
2b9f486bf5 net: Improve BOOTP PXE config option
Improve the documentation and correct the listed dependencies.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 15:48:21 -05:00
Joe Hershberger
80449c032c net: Add the BOOTP_DNS2 option to Kconfig
Commit 3b3ea2c56e ("Kconfig: cmd: Make networking command dependent on NET")
removed the help documentation from the README but didn't add it back to Kconfig.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 15:48:17 -05:00
Joe Hershberger
8df69d9063 net: Improve menu options and help for BOOTP options
The options were pretty unhelpful, so improve them some.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 15:48:13 -05:00
Joe Hershberger
e88b2563dd net: Move the DHCP command below the BOOTP command
Move DHCP to directly follow BOOTP so that Kconfig can show the
dependency as a hierarchy.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 15:48:09 -05:00
Joe Hershberger
92fa44d58f net: Move net command options to the cmd menu
Options that controlled the tftp and bootp commands depended on their
commands, but lived in the net menu.

Move them so they are in a consistent location.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 15:48:05 -05:00
Joe Hershberger
d7a45eafda net: Make CMD_NET a menuconfig
Previously, CMD_NET was an alias for 2 commands (bootp and tftpboot) and
they we not able to be disabled. Separate out those 2 commands and move
CMD_NET up to the menu level, which more accurately represents the code.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 15:47:57 -05:00
Tom Rini
844fb498cc Patch queue for efi - 2018-04-09
Highlights this time around:
 
   - Lots of minor spec compliance fixes
   - Support full range of GOP BLT commands
   - More fine grained error checking
   - Network fixes (init, DP)
   - Lots of other bug fixes...
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJay2U6AAoJECszeR4D/txgE8UP/A5xHq707fv4CcQez/cZj/KE
 Twv4HoSY28by71VWS+SjXXTKkx+XGM/2tLzl6dQCB9V1aFUwtB12zu4mXpplfT8R
 K+dJU9PgkPKJzWRvn08JgeuXs1RQnfSgXz5J2pvSnJ4mySMlZKuVRGwHxw7DLFPf
 EZOqkd2+NI90fogGFoZ2l/aAzbDssBI45jDmH0KcPO49/+7XRVYJqpg0s7TQYmhY
 BeoJ0mAp12Ybpb4E7XDIGKKgCTjOGnftoRmzZyPZPfHPrmVWo2srmtycDbz0f/N0
 tEiXIOAo72DzmhL6aPPNJtt1mjXTGU2iavkV74JVqXODCd3bRJxz7TF6R30Nmvfz
 WMaKM+69Ahior9YJnGv2GUe8ebThxivWUUCB6HmfRh07sGCes6eV3HfklY5Fnglu
 Gw5pRl9+YBOywuUuyMg/yBPpPyA7b1HaTjwhsYWAB+q7htB6JkPhQruMxdiMaQnC
 gvOEoguW1XZo4MSudfC/SUOdayGp+KsQiEivi8gUh11uBPA2nj1Bh028Pj7tTET3
 J4C527uF/ivKwhx2hUHq2YkkgxHWz0Z98LFG3Xkj3q3fZFRwSEzugik1TswT8z3l
 qPxWgwX7Q9dxNYLW4ogvnlXU/09APRg9fVeaXxOfqJTHCCn9PHehbKKpkJ9g3cOt
 lPr1Q/4C5daK8dnxDzYo
 =fzbe
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2018-04-09

Highlights this time around:

  - Lots of minor spec compliance fixes
  - Support full range of GOP BLT commands
  - More fine grained error checking
  - Network fixes (init, DP)
  - Lots of other bug fixes...
2018-04-09 11:05:44 -04:00
Alex Kiernan
9925f1dbc3 net: Move enetaddr env access code to env config instead of net config
In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.

This fixes failures such as:

  board/ti/am335x/built-in.o: In function `board_late_init':
  board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr'
  u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr'

which caters for use cases such as:

commit f411b5cca4 ("board: am335x: Always set eth/eth1addr environment
variable")

when Ethernet is required in Linux, but not U-Boot.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-08 23:00:58 -04:00
Mario Six
e89f8aae3d treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig
Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
[trini: Re-run migration after also including CMD_MEMTEST]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-08 14:52:45 -04:00
Mario Six
55b2556115 cmd: Add command for calculating binary operations
This patch adds a command that enables the calculation of bit operations
(AND, OR, XOR) on binary data from the command line. Memory locations as
well as the contents of environment variables are eligible as sources
and destination of the binary data used in the operations.

The possible applications are manifold: Setting specific bits in
registers using the regular read-OR-write pattern, masking out bits in
bit values, implementation of simple OTP encryption using the XOR
operation, etc.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-06 20:45:44 -04:00
Mario Six
8354aa2781 cmd: ximg: Respect cache line size for flushing
Make sure that the cache line size if respected when flushing the cache.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-06 20:45:44 -04:00
Christian Gmeiner
476c2fcd28 bootvx: use program header for loading
The section header address is a VMA whereas the address found in
the program header is a physical one. With this change it is
possible to load and start a vx7 intel generic based image.

$ readelf -l /tmp/vx7

Elf file type is EXEC (Executable file)
Entry point 0x408000
There are 2 program headers, starting at offset 52

Program Headers:
  Type           Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg Align
  LOAD           0x001000 0x00408000 0x00408000 0x04000 0x04000 RWE 0x1000
  LOAD           0x005000 0xe040c000 0x0040c000 0x583a84 0x5ccc70 RWE 0x1000

 Section to Segment mapping:
  Segment Sections...
   00     .text.locore .data.locore
   01     .text .eh_frame .wrs_build_vars .data .tls_data .tls_vars .bss

$ readelf -S /tmp/vx7
There are 13 section headers, starting at offset 0x588af8:

Section Headers:
  [Nr] Name              Type            Addr     Off    Size   ES Flg Lk Inf Al
  [ 0]                   NULL            00000000 000000 000000 00      0   0  0
  [ 1] .text.locore      PROGBITS        00408000 001000 00011e 00  AX  0   0 16
  [ 2] .data.locore      PROGBITS        00409000 002000 003000 00  WA  0   0 4096
  [ 3] .text             PROGBITS        e040c000 005000 4802a0 00 WAX  0   0 32
  [ 4] .eh_frame         PROGBITS        e088c2a0 4852a0 0a1ed0 00   A  0   0  4
  [ 5] .wrs_build_vars   PROGBITS        e092e170 527170 000190 00  Ax  0   0  1
  [ 6] .data             PROGBITS        e092f000 528000 060a70 00  WA  0   0 4096
  [ 7] .tls_data         PROGBITS        e098fa70 588a70 000004 00   A  0   0  4
  [ 8] .tls_vars         PROGBITS        e098fa78 588a78 00000c 00  WA  0   0  4
  [ 9] .bss              NOBITS          e098faa0 588a84 0491d0 00  WA  0   0 32
  [10] .shstrtab         STRTAB          00000000 588a84 000074 00      0   0  1
  [11] .symtab           SYMTAB          00000000 588d00 056ee0 10     12 9758  4
  [12] .strtab           STRTAB          00000000 5dfbe0 05f48a 00      0   0  1
Key to Flags:
  W (write), A (alloc), X (execute), M (merge), S (strings)
  I (info), L (link order), G (group), T (TLS), E (exclude), x (unknown)
  O (extra OS processing required) o (OS specific), p (processor specific)

For completeness here are the same information for an old vx5 based image. After
this change it is possible to boot vx5 and vx7 (intel generic) images.

$ readelf -l /tmp/vx5

Elf file type is EXEC (Executable file)
Entry point 0x308000
There are 1 program headers, starting at offset 52

Program Headers:
 Type           Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg Align
 LOAD           0x000060 0x00308000 0x00308000 0x3513a0 0x757860 RWE 0x20

Section to Segment mapping:
 Segment Sections...
  00     .text .data .bss
[christian@chgm-pc ~]$ readelf -S /tmp/vx5
There are 12 section headers, starting at offset 0x356580:

Section Headers:
 [Nr] Name              Type            Addr     Off    Size   ES Flg Lk Inf Al
 [ 0]                   NULL            00000000 000000 000000 00      0   0  0
 [ 1] .text             PROGBITS        00308000 000060 319b10 00 WAX  0   0 32
 [ 2] .data             PROGBITS        00621b20 319b80 037880 00  WA  0   0 32
 [ 3] .bss              NOBITS          006593a0 351400 4064c0 00  WA  0   0 16
 [ 4] .debug_aranges    PROGBITS        00000000 351400 000060 00      0   0  1
 [ 5] .debug_pubnames   PROGBITS        00000000 351460 00018b 00      0   0  1
 [ 6] .debug_info       PROGBITS        00000000 3515eb 003429 00      0   0  1
 [ 7] .debug_abbrev     PROGBITS        00000000 354a14 000454 00      0   0  1
 [ 8] .debug_line       PROGBITS        00000000 354e68 0016a4 00      0   0  1
 [ 9] .shstrtab         STRTAB          00000000 35650c 000071 00      0   0  1
 [10] .symtab           SYMTAB          00000000 356760 0440e0 10     11 8574  4
 [11] .strtab           STRTAB          00000000 39a840 03e66c 00      0   0  1
Key to Flags:
 W (write), A (alloc), X (execute), M (merge), S (strings)
 I (info), L (link order), G (group), T (TLS), E (exclude), x (unknown)
 O (extra OS processing required) o (OS specific), p (processor specific)

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2018-04-06 20:45:44 -04:00
Christophe Leroy
ee1e600c13 powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx
CONFIG_8xx doesn't mean much outside of arch/powerpc/
This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ...
It also renames 8xx_immap.h to immap_8xx.h to be consistent with
other file names.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06 16:30:37 -04:00
Alexander Graf
806d2fa8e3 efi_loader: Respect DT reserved regions
With legacy boot (booti, bootz), people can declare memory regions as
reserved using device tree memory reservations. This feature is some
times used to indicate memory regions that should not be touched.

Since in a UEFI world, the DT memory reservations do not get honored,
let's copy them into the UEFI memory map so everyone has a coherent
view of the world and we give people the chance to add reservations
on demand.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-06 09:40:53 +02:00
Tom Rini
e294ba0678 Merge git://git.denx.de/u-boot-sunxi
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-04 14:10:39 -04:00
Heinrich Schuchardt
2db1eba1c3 efi_loader: correctly determine the boot partition
The device path of the loaded image should be set to the partition
from which the image was loaded. This requires using the same logic as
the load command.

Without the patch the device path pointed to the whole disk after executing

	load mmc 0: 0x43000000 FILE

and not to the boot partition from which the file was actually loaded.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 13:14:33 +02:00
Heinrich Schuchardt
bc4f9133ed efi_loader: support device tree for bootefi selftest
The second argument of the bootefi command should always be usable to
specify a device tree. This was missing for bootefi selftest and
bootefi hello.

Proper error handling is added.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 11:00:06 +02:00
Heinrich Schuchardt
fc225e6082 efi_loader: check initialization of EFI subsystem is successful
Up to now errors in the initialization of the EFI subsystems was not
checked.

If any initialization fails, leave the bootefi command.

We do not retry initialization because this would require to undo all prior
initalization steps.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 11:00:06 +02:00
Heinrich Schuchardt
45204b1025 efi_loader: do_bootefi_exec should always return an EFI status code
The return type of do_bootefi_exec() is efi_status_t. So in case
of an error we should always return an EFI status code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 11:00:06 +02:00
Heinrich Schuchardt
098a6cdd1c efi_loader: simplify calling efi_init_obj_list
efi_init_obj_list() should be executed only once.

Rather than having the caller check this variable and the callee set it,
move all access to the variable inside the function. This reduces the
logic needed to call efi_init_obj_list().

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 11:00:06 +02:00
Andre Przywara
d14db11d76 sunxi: revert disabling of features
In January some commits were introduced to mitigate the U-Boot image
size issues we encountered on sunxi builds.
Now with the MMC environment removed we can bring them back, as we
practically don't have a size limit anymore.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-04 14:15:40 +05:30
Andre Heider
33222c8a2c cmd: cbfs: fix reading the end_of_rom pointer for 64bit archs
The cast breaks the pointer on 64bit archs, so lets get rid of it.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-03-31 16:00:03 +08:00
Liam Beguin
10f087f73f cmd: sf: fix map_physmem check
Make sure 0x00 is a valid address to read to. If `addr` is 0x00 then
map_physmem() will return 0 which should be a valid address.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2018-03-22 13:25:20 -04:00
Sam Protsenko
64e6a49a11 cmd: part: Extract common code to separate function
Refactor the code for "part start" and "part size" commands to avoid
code duplication.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-03-13 21:59:27 -04:00
Sam Protsenko
36df616a2d cmd: part: Allow passing partition name to start and size
Allow passing the partition name to "part start" and "part size"
commands, so we can avoid magic numbers in the environment.

Consider one real use-case: in include/environment/ti/boot.h we have
commands like these:

    setenv boot_part 9
    part start mmc ${mmcdev} ${boot_part} boot_start
    part size mmc ${mmcdev} ${boot_part} boot_size
    mmc read ${loadaddr} ${boot_start} ${boot_size}

Now suppose that we have changed the partition table and boot_part now
is 10. We will need to fix commands above. And anyone who relies on
these boot commands, will need to change them accordingly, too (this was
an actual case in our lab while testing Linux boot on Android
environment).

By providing the option to pass partition name instead, we fix mentioned
issue, by eliminating the necessity to use magic numbers.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-03-13 21:59:26 -04:00