Commit graph

64 commits

Author SHA1 Message Date
Kotaro Hayashi
04f3da3936 ARM: uniphier: add DRAM PHY clock duty adjustment for LD20 SoC
If the DRAM clock duty does not meet the allowable tolerance,
it is marked in an efuse register.  If the register is fused,
the boot code should compensate for the DRAM clock duty error.

Signed-off-by: Kotaro Hayashi <hayashi.kotaro@socionext.com>
[masahiro: simplify code, add git-log]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-23 08:37:56 +09:00
Masahiro Yamada
dd38374d2f ARM: uniphier: remove dram_nr_ch from board parameters
This parameter is redundant because we can know the number of
channels by checking if dram_ch[2].size is zero.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-23 08:37:56 +09:00
Masahiro Yamada
513cfaccc8 ARM: uniphier: refactor cmd_ddrmphy
Make it look like cmd_ddrphy.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-29 20:59:08 +09:00
Masahiro Yamada
fada9eafe1 ARM: uniphier: clean up UMC init for PXs2 SoC
Just cosmetic changes:
  - Rename prefix DMPHY_ to MPHY_ for consistency
  - Move UMC parameters below for complete decouple of PHY and UMC
  - Remove redundant whitespaces

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-29 20:59:08 +09:00
Masahiro Yamada
bf52091786 ARM: uniphier: refactor cmd_ddrphy
It seems more readable to use arrays to get SoC specific parameters
instead of the crappy switch statement.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-29 20:59:08 +09:00
Masahiro Yamada
773f5f63dc ARM: uniphier: shrink arrays of DDR-PHY parameters for LD20 SoC
The two arrays ddrphy_{op,ip}_dq_shift_val, occupy more than 3.8 KB
memory footprint, which is significant in SPL.

There are PHY parameters for 5 boards, but they are actually not
board specific, but SoC specific.  After all, we just need to have
2 patterns, for LD20 and LD21.  Also, the shift values are small
enough to become "short" type instead of "int".  This change will
save about 3 KB memory footprint.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-29 20:59:08 +09:00
Masahiro Yamada
e27d6c7d32 ARM: uniphier: simplify SoC ID get function
Currently, uniphier_get_soc_type() converts the SoC ID (this is
read from the revision register) to an enum symbol to use it for SoC
identification.  Come to think of it, there is no need for the
conversion in the first place.  Using the SoC ID from the register
as-is a straightforward way.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22 16:49:27 +09:00
Masahiro Yamada
0f4ec05bbb ARM: uniphier: replace <linux/err.h> with <linux/errno.h>
These files only need error number macros.  Actually, IS_ERR(),
PTR_ERR(), ERR_PTR(), etc. are not useful for U-Boot.  Avoid
unnecessary header includes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22 15:32:56 +09:00
Kotaro Hayashi
7d75254b3d ARM: uniphier: fix delay fixup code in LD11 UMC init
The ddrphy_shift_rof_hws() never writes back the shifted delay value
to the register, which makes this function non-effective.

Signed-off-by: Kotaro Hayashi <hayashi.kotaro@socionext.com>
[masahiro: add git log]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22 15:01:27 +09:00
Wataru Okoshi
e95455ac1b ARM: uniphier: update UMC_MEMMAPSET value for LD20 SoC
Change bnk_typ's value from 8 to 0 (for G1's performance).

Signed-off-by: Wataru Okoshi <okoshi.wataru@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22 15:01:27 +09:00
Masahiro Yamada
a8e6300d48 ARM: uniphier: refactor spl_init_board()
Merge init-*.c into a single file using a table of callbacks because
the initialization flow is almost common among SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-18 01:22:30 +09:00
Masahiro Yamada
996fcdadba ARM: uniphier: remove unneeded parentheses
Just a cosmetic cleanup.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-12-10 01:42:51 +09:00
Masahiro Yamada
6eeb624148 ARM: uniphier: update DRAM init code for LD11 SoC
Introduce run-time DDR PHY training.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29 17:24:30 +09:00
Masahiro Yamada
5f49845ecc ARM: uniphier: support DDR PHY parameter dump command for LD11
Add the LD11 SoC data and adjuts the printf() format because this is
a 64-bit SoC.  Otherwise, 16-digits pointer addresses would break
the log format.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29 17:24:30 +09:00
Masahiro Yamada
adf55f63ae ARM: uniphier: refactor DDR PHY parameter dump command
Do not hard-code the number of DX blocks because it is a different
value for LD11 SoC.

Move the macro NR_DATX8_PER_DDRPHY to ddrphy-training.c since it
is the last user.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29 17:24:30 +09:00
Masahiro Yamada
6dd34ae4c4 ARM: uniphier: rework existing DDR PHY code to reuse for LD11 SoC
The DDR PHY register view of LD11 is slightly different from that
of LD4/Pro4/sLD8, but it will be possible to share the register
macros (and I want to re-use as much code as possible).  Change
the code in the more flexible form.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29 17:24:30 +09:00
Masahiro Yamada
a8b66ac87c ARM: uniphier: fix DRAM init poll address for LD4, Pro4, sLD8
The status register should be polled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29 17:24:30 +09:00
Masahiro Yamada
efaa22e426 ARM: uniphier: rename ddrphy-ld20-regs.h to ddruqphy-regs.h
This PHY might be used for other SoCs in the future.
Avoid including the SoC name in the header name.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29 17:24:30 +09:00
Masahiro Yamada
b8909976ed ARM: uniphier: update DRAM init code for LD20 SoC (3rd)
- Constify UMC setting data arrays
  - Merge data arrays *_d0 and *_d1.
  - Add PHY parameters for LD20 C1 board

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29 17:24:26 +09:00
Masahiro Yamada
c89638a027 ARM: uniphier: update DRAM init code for LD20 SoC (2nd)
- Do not reference CONFIG_DDR_FREQ; now the DDR frequency
    is passed from the uniphier_board_data structure
  - Constify parameter arrays
  - Tidy up cluttered macros
  - Lots of code cleanups
  - Lots of coding style fixes

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10 10:03:23 +09:00
Masahiro Yamada
f9d7e17e84 ARM: uniphier: update DRAM init code for LD20 SoC
Import the latest version from the Diag software.

  - Support LD21 SoC (including DDR chips in the package)
  - Per-board granule adjustment for both reference and TV boards
  - Misc cleanups

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-19 00:12:26 +09:00
Masahiro Yamada
c21fc7e223 treewide: fix "followings" to "following"
Most of them are my mistakes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-26 17:04:58 -04:00
Masahiro Yamada
a74c28a0f2 ARM: uniphier: introduce flags to uniphier_board_data structure
I need to add more board attributes, so the "flags" member will be
handier than separate boolean ones.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:24:55 +09:00
Masahiro Yamada
4e3d84066e ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()
This does not have much impact on behavior, but makes code look more
more like Linux.  The use of devm_ioremap() often helps to delete
.remove callbacks entirely.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:13:10 +09:00
Masahiro Yamada
667dbcd01d ARM: uniphier: add PH1-LD11 SoC support
This is a low-cost ARMv8 SoC from Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26 00:37:13 +09:00
Masahiro Yamada
7381db86a9 ARM: uniphier: rename UMC register macros of PH1-LD20
Correct some register names.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26 00:36:58 +09:00
Masahiro Yamada
0586e22783 ARM: uniphier: rename umc-ld20-regs.h to umc64-regs.h
This header will be shared between PH1-LD11 and PH1-LD20
(and hopefully new ARMv8 SoCs developed in the future),
so umc64-regs.h would be a better fit.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26 00:35:26 +09:00
Masahiro Yamada
9d0c2ceb35 ARM: uniphier: add PH1-LD20 SoC support
This is the first ARMv8 SoC from Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-24 09:54:08 +09:00
Masahiro Yamada
5b66006646 ARM: uniphier: rename function names ph1_* to uniphier_*
Eliminate the "ph1"_ prefixes from function names because "uniphier_"
describes the SoC familiy better.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:59:47 +09:00
Masahiro Yamada
1b1f2319ca ARM: uniphier: drop ifdef in ddrphy-regs.h
The ifdef conditionals in header files prevent us from multi-SoC
support in a single U-Boot image.  Detect SoC specific parameters
run-time rather than define them statically with an ifdef in
ddrphy-regs.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:45:19 +09:00
Masahiro Yamada
ea65c98050 ARM: uniphier: drop PH1- prefix from CONFIG options and file names
The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too
long.  It would not hurt to drop "PH1_" because "UNIPHIER_" already
well specifies the SoC family.  Also, rename files for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:42:13 +09:00
Masahiro Yamada
51244a6080 ARM: uniphier: fix build error when CONFIG_CMD_DDRMPHY_DUMP=y
The build fails if compiled with CONFIG_CMD_DDRMPHY_DUMP=y since commit
46abfcc99e ("ARM: uniphier: rework struct uniphier_board_data").

Fixes: 46abfcc99e ("ARM: uniphier: rework struct uniphier_board_data")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-09 01:10:47 +09:00
Masahiro Yamada
4e651003e5 ARM: uniphier: rename variable for DRAM controller base address
Rename the variable that contains the base address for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
a191e0dee0 ARM: uniphier: deprecate umc_dram_init_{start, poll}
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
7c9cac9c22 ARM: uniphier: remove unused macros for UMC base addresses
These macros are no longer used.  These base addresses are
SoC-dependent, so they should not be placed in the header.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
fd14397e93 ARM: uniphier: rework DRAM size handling in UMC init code
Currently, DRAM size is converted twice:
  size in byte -> size in Gbit -> enum

Optimize the code by converting the "size in byte" into enum directly.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
9a71844a38 ARM: uniphier: optimize PH1-Pro4 UMC init code with "for" loop
Now this code can be re-written with a "for" statement instead of
calling the same function multiple times.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
b870848795 ARM: uniphier: optimize PH1-LD4 UMC init code with "for" loop
Now this code can be re-written with a "for" statement instead of
calling the same function multiple times.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
c5985b4bbb ARM: uniphier: optimize PH1-sLD8 UMC init code with "for" loop
Now this code can be re-written with a "for" statement instead of
calling the same function multiple times.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
71d7ef35df ARM: uniphier: refactor UMC init code for PH1-LD4
Move frequency-dependent register settings to arrays for clean-up.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
380a8cafc0 ARM: uniphier: support more DRAM use cases for PH1-sLD8
Support DDR3-1600 / 512MB DDR size.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
82e5950802 ARM: uniphier: refactor UMC init code for PH1-sLD8
Move frequency-dependent register settings to arrays for clean-up.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
6257a0b0e9 ARM: uniphier: refactor DDR-PHY init code
The if-else statements for the frequency-dependent register settings
seem clumsy.  Moving them to arrays would make it cleaner.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
7887670498 ARM: uniphier: remove unused argument of ph1_ld4_ddrphy_init()
The DDR PHY settings no longer depend on the DRAM size.  Drop the
argument from the init function.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
4f19f61184 ARM: uniphier: merge DDR PHY init code for 3 SoCs
Now these three are almost the same.  The only difference is the DTPR1
register dependency on the DRAM size, but it can be ignored.  (It has
already been ignored in PH1-sLD8 and PH1-Pro4.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
4021b4381d ARM: uniphier: add a field to specify DDR3+
Add a field to distinguish DDR3+ from (standard) DDR3.  It also
allows to delete CONFIG_DDR_STANDARD (this is not a software
configuration, but a board attribute).

Default DDR3 spec for each SoC:

  PH1-LD4, PH1-sLD8: DDR3+
  Others: DDR3

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
3c963d4899 ARM: uniphier: disable debug circuit clocks for PH1-Pro4
These settings control the clocks around the memory controller.
The debug ability is unneeded once it works properly.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
00dd3f6ab0 ARM: uniphier: remove UMC_INITCTL* and UMC_DRMR* settings
These settings were used only for the PH1-sLD3 and older SoCs.  The
PH1-LD4 and newer one just ignore them because their DDR-PHY take
care of such timing parameters instead.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
94b756f331 ARM: uniphier: refactor UMC init code for ProXstream2
Currently, a dummy value is defined for the UMC_SPCCTLA register
when the DRAM size is zero.  This seems weird because the controller
does not need setting in the first place if the size is zero.

Also, redefine enum dram_size to represent the DRAM size per 16-bit
unit.  This makes things simpler because the channel 0 and 1 are
connected with 32-bit width DRAM, while the channel 2 is connected
with 16-bit width one.

I am renaming SIZE_* into DRAM_SZ_* (and also FREQ_* to DRAM_FREQ_*
for consistency) while I am here because SIZE_* might be easily
mixed-up with the macros in include/linux/sizes.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
a54c879a42 ARM: uniphier: use pr_err() where possible
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00