Commit graph

39 commits

Author SHA1 Message Date
Tim Harvey
c8645e7411 configs: imx8m: Prepare imx8m-venice boards for HAB support
In order to enable HAB, FSL_CAAM, ARCH_MISC_INIT and
SPL_CRYPTO should be enabled in Kconfig like other i.MX8M
boards.

This also needs to occur in the SPL so enable CONFIG_SPL_BOARD_INIT and
add a void spl_board_init function which calls arch_misc_init to probe
the CAAM driver.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 11:29:40 +02:00
Tim Harvey
13897ff6d9 board: gateworks: venice: move env location
To allow U-Boot to fit within emmc boot partitions move the env from
just under 16MiB to just under 4MiB as some emmc devices used on venice
boards have 4MiB boot partitions. This still leaves plenty of room for
U-Boot.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2023-07-11 14:40:03 +02:00
Tim Harvey
c226f84256 board: gateworks: venice: add eraseenv command
Add eraseenv command and remove the unnecessary env command.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-07-11 14:40:03 +02:00
Tim Harvey
8849cc7bd9 board: gateworks: venice: add GPIO name lookup
Add GPIO name lookup so that you can act on GPIO's by name vs controller
id:

Before:
u-boot=> gpio input pci_wdis#
GPIO: 'pci_wdis#' not found
Command 'gpio' failed: Error -22

After:
u-boot=> gpio input pci_wdis#
gpio: pin pci_wdis# (gpio 103) value is 1

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-07-11 14:40:03 +02:00
Tom Rini
c90e18932b configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-29 10:43:26 -04:00
Tom Rini
c960c0fd38 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 11:50:26 -04:00
Tim Harvey
7e32871ce4 board: gateworks: venice: enable XWAY PHY support
Enable XWAY PHY driver and remove board specific config from
board_phy_config weak override.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-03-30 00:45:39 +02:00
Tom Rini
c358af81d0 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-27 13:39:17 -04:00
Tom Rini
fcb5117da8 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 09:58:06 -05:00
Tom Rini
c4ee4fe92e For 2022.01
-----------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14083
 
 - Fix UART
 - moved to binman (MX8 boards)
 - Toradex: sync DTS with Linux
 - Gateworks: fixes
 - New boards : MSC SM2S iMX8MP
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCY3IX9A8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76a1dQCfTS1TpBF/Sjj0htkhw88AI+3x6UIAni5w6FmV
 bXA7Ymykew4cCkSRvesZ
 =OdkN
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20221114' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

For 2022.01
-----------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14083

- Fix UART
- moved to binman (MX8 boards)
- Toradex: sync DTS with Linux
- Gateworks: fixes
- New boards : MSC SM2S iMX8MP
2022-11-14 09:33:36 -05:00
Tom Rini
08574ed339 Convert CONFIG_SYS_MONITOR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tim Harvey
4a71b9c286 configs: imx8m{m,n,p}_venice: disable autoload
disable network autoload

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-11-08 17:35:00 +01:00
Simon Glass
984639039f Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE
and this makes it imposible to use CONFIG_VAL().

Rename it to resolve this problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31 11:01:31 -04:00
Tim Harvey
5c525acafc imx8*_venice_defconfig: configure default MMC env device
When booting from USB/SDP mmc_get_env_dev() returns
CONFIG_SYS_MMC_ENV_DEV as the MMC env device (while booting from MMC
will call board_mmc_get_env_dev() to get this). Configure
CONFIG_SYS_MMC_ENV_DEV for SDHC3 (devno=2) as all Gateworks Venice
boards use SDHC3 as eMMC so that persistent env works when booting from
USB/SDP.

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-10-20 17:35:51 +02:00
Tim Harvey
59f6141362 imx8m*_venice_defconfig: fix default bootcmd
commit 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig")
had an unintended side effect of resulting in a bootcmd env var change
for boards like venice that did not have CONFIG_USE_BOOTCOMMAND defined
and relied on it being defaulted in include/config_distro_bootcmd.h.
Following that patch it instead got defaulted in tools/env/fw_env_private.h

Fix this by enabling CONFIG_USE_BOOTCOMMAND for venice.

Fixes: commit 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-09-19 08:53:50 -04:00
Tom Rini
1247c35c80 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23 15:24:14 -04:00
Tom Rini
c45568cc4e Convert CONFIG_SYS_BOOTM_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BOOTM_LEN

As part of this, rework error handling in boot/bootm.c so that we pass
the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not
be available to host tools but we do know the size that we passed to
malloc().

Cc: Soeren Moch <smoch@web.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:09 -04:00
Tom Rini
10f6e4dc3a Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_SPL_MALLOC_SIZE
   CONFIG_SYS_SPL_MALLOC_START

We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to
control if we have a malloc pool or not.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:28 -04:00
Tom Rini
6600b355c7 Convert CONFIG_SPL_BSS_START_ADDR to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_BSS_START_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:28 -04:00
Tom Rini
f113d7d303 Convert CONFIG_SPL_STACK to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_STACK

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:27 -04:00
Tom Rini
9b5f9aeb3b Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_BSS_MAX_SIZE
   CONFIG_SPL_MAX_FOOTPRINT

Note that the da850evm platforms were violating the "only use one" rule
here, and so now hard-code their BSS limit.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:10 -04:00
Tom Rini
ca8a329a1b Convert CONFIG_SPL_PAD_TO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_PAD_TO
   CONFIG_SPL_MAX_SIZE
   CONFIG_TPL_PAD_TO
   CONFIG_TPL_MAX_SIZE

Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the
existing places.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:06 -04:00
Tom Rini
d31466b382 Convert CONFIG_SYS_CBSIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CBSIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
d0ee7f295d Convert CONFIG_SYS_PBSIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_PBSIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
cf493582f8 Convert CONFIG_SYS_MAXARGS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MAXARGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:08:58 -04:00
Tim Harvey
6fc639461b board: gateworks: venice: enable SPL_DM_SERIAL
The uart2 and its pinmux are already marked with u-boot,dm-spl but we
need to move the call to preloader_console_init() after spl_early_init()
to avoid a board hang as dm can't be used until after spl_early_init()
due to the uart driver not enabling the uart clock.

Remove the manual config of the UART pinmux now that it is no longer
needed.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20 09:30:28 +02:00
Tom Rini
bfdb30559c configs: Resync with savedefconfig
Resync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-22 10:17:35 -04:00
Tim Harvey
1cb249b6b6 imx8m{m, n}_venice_defconfig: enable md5sum and crc32 commands
Enable the md5sum and crc32 commands.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00
Tim Harvey
7a2ff55d87 imx8m{m,n}_venice_defconfig: add DT overlay support
enable CONFIG_OF_LIBFDT_OVERLAY to support applying dt overlays in
U-Boot.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00
Tim Harvey
d5cc234154 arm: dts: imx8m*-venice: add gpio hog support
Add gpio hog support for board-specific gpio lines:
- put hogs in u-boot.dtsi so as to keep the regular dts files
  in sync with the kernel. The hogs will not be put in the kernel
  as that makes them un-usable by userspace as well as
  re-initializes them to dt defaults overriding changes which may
  have been done by bootloader commands.
- specify gpio names and initial config
- enable GPIO_HOG

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 12:44:23 +02:00
Tim Harvey
fb9ec33878 board: gateworks: venice: use common GSC driver
Use the common GSC driver.

This allows us to do some additional cleanup:
 - rename gsc{.c,.h} to eeprom{.c.h} for clarity
 - collapse eeprom_get_dev
 - remove unnecessary header files and alphabatize includes

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:23 +02:00
Tim Harvey
82b16555cf board: gateworks: venice: enable DM_SERIAL
Enable DM_SERIAL.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:23 +02:00
Tim Harvey
c574736915 configs: imx8m{m,n}_venice_defconfig: add usb support
Enable USB support for host controller and various USB ethernet
devices.

Example usage of USB Mass Storage (UMS) support:
 u-boot=> mmc list
 FSL_SDHC: 0
 FSL_SDHC: 1
 FSL_SDHC: 2 (eMMC)
 u-boot=> ums 0 mmc 2
 UMS: LUN 0, dev mmc 2, hwpart 0, sector 0x0, count 0xe30000

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:23 +02:00
Tim Harvey
fd5c7173ad imx8m{m,n}_venice: update env memory layout
Update distro config env memory layout:
 - loadaddr=0x48200000 allows for 130MB area for uncompressing (ie FIT
   images, kernel_comp_addr_r)
 - fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel
 - scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt
 - ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-21 12:44:23 +02:00
Tom Rini
d46e86d25c configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 13:36:51 -04:00
Tom Rini
0a3689cb86 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:33:18 -04:00
Tom Rini
bc30585888 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:40 -04:00
Tom Rini
0e14cdfaf3 Convert CONFIG_ETHPRIME to Kconfig
This converts the following to Kconfig:
   CONFIG_ETHPRIME

This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME
similar to other options that are not always set and control environment
variables.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tim Harvey
2cb156e126 board: gateworks: venice: add imx8mn-gw7902 support
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
 - LPDDR4 DRAM
 - eMMC FLASH
 - Gateworks System Controller
 - LTE CAT M1 modem
 - USB 2.0 HUB
 - M.2 Socket with USB2.0, PCIe, and dual-SIM
 - IMX8M FEC
 - PCIe based GbE
 - RS232/RS485/RS422 serial transceiver
 - GPS
 - CAN bus
 - WiFi / Bluetooth
 - MIPI header (DSI/CSI/GPIO/PWM/I2S)
 - PMIC

To add support for the i.MX8M Nano GW7902:
 - Add imx8mn-venice dts/defconfig/include
 - Add imx8mn-gw7902 dts
 - Add imx8mn-2gb lpddr4 dram configs
 - Add misc support for IMX8M Nano SoC
 - rename imx8mm-venice.c to venice.c as it is no longer imx8mm specific
 - update README with differences for IMX8MN vs IMX8MM

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19 14:46:54 +01:00