Commit graph

29 commits

Author SHA1 Message Date
Weijie Gao
fccf960e1c mmc: mediatek: add support for MediaTek MT7891/MT7986 SoCs
Add eMMC and SDXC support for MediaTek MT7981/MT7986 SoCs
Both chips support SDXC and eMMC 4.5. MT7986A supports eMMC 5.1.

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-09-23 15:09:15 -04:00
Weijie Gao
163db41d2f mmc: mediatek: add support for MediaTek MT7621 SoC
This patch adds SDXC support for MediaTek MT7621 SoC

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-07-13 23:03:37 +02:00
Julien Masson
faf5d4d53d mmc: mtk-sd: implement waiting for DAT0 line state
With the recent changes on mmc driver, we saw that the boot is ~5 secs
longer compared to v2021.07 on mediatek platforms.

This regression is seen during mmc_init and caused by the following
patch [1].

Indeed since we did not support poll dat0, we fulfilled the condition
of [1] and a delay of 500 ms was added for every __mmc_switch call.

By adding the support of wait_dat0(), we now don't need to mdelay
during mmc_init anymore.

[1]: https://patchwork.ozlabs.org/project/uboot/patch/1629192034-64056-1-git-send-email-ye.li@nxp.com/

Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-11-17 17:04:59 -05:00
Weijie Gao
3a3672cc37 mmc: mtk-sd: increase the minimum bus frequency
With a 48MHz input clock, the lowest bus frequency can be as low as
48000000 / (4 * 4095) = 2930Hz. Such an extremely low frequency will cause
the mmc framework take seconds to finish the initialization.

Limiting the minimum bus frequency to a slightly higher value can solve the
issue without any side effects.

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-06-22 12:01:52 +08:00
Daniel Golle
30e76b755b mmc: mtk-sd: don't ignore max-frequency from device tree
commit e58e68d9 ("mmc: mtk-sd: assign plat->cfg.f_max with a correct value")
wrongly assumed that plat->cfg.f_max is always unset at the time
mscd_drv_probe() is run. This is not true in case max-frequency being
defined in device tree, as it is then already set by mmc_of_parse()
in msdc_of_to_plat().
Only set plat->cfg.f_max to the default maximum value in case it is
not already set to a sane value.

Fixes: e58e68d93e ("mmc: mtk-sd: assign plat->cfg.f_max with a correct value")
Cc: Stefan Roese <sr@denx.de>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-17 12:27:58 -04:00
Weijie Gao
e58e68d93e mmc: mtk-sd: assign plat->cfg.f_max with a correct value
Currently this driver does not set the value of plat->cfg.f_max, which
results in that MMC framework will always run at the lowest frequency.

This patch sets plat->cfg.f_max to the maximum allowed frequency, which
equals to the source clock frequency.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:27 +01:00
Weijie Gao
2a505cd1c7 mmc: mtk-sd: add pad control settings for MediaTek MT7620/MT76x8 SoCs
The driver is missing pad control settings (pad delay and pad conf) for
the mt7620 and mt76x8. Although mt76x8 still works well, mt7620 will
encounter CRC error on data transfers.

This patch adds default pad control settings for mt7620_compat.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:27 +01:00
Weijie Gao
f875a12578 mmc: mtk-sd: fix sclk cycles shift value
It turns out that the sclk cycles used by mt7620/mt7628 is the same as
other chips (20 bits, 1048576), not 65536.

This patch removes sclk_cycle_shift from dev_comp, and uses a macro with
a value 20 instead.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:27 +01:00
Simon Glass
d1998a9fde dm: treewide: Rename ofdata_to_platdata() to of_to_plat()
This name is far too long. Rename it to remove the 'data' bits. This makes
it consistent with the platdata->plat rename.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
c69cda25c9 dm: treewide: Rename dev_get_platdata() to dev_get_plat()
Rename this to be consistent with the change from 'platdata'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00
Simon Glass
41575d8e4c dm: treewide: Rename auto_alloc_size members to be shorter
This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 08:00:25 -07:00
Fabien Parent
0d67576713 mmc: mtk-sd: change some dev_err into dev_dbg
dev_err has been used for debugging and a few dev_err message are
printed for normal code execution. Make them dev_dbg instead.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-22 11:26:14 -04:00
Sean Anderson
e1ce790128 mmc: mtk-sd: Fix not calling dev_err with a device
This adds a udevice parameter to get_best_delay and msdc_set_mclk so they
can call dev_err properly.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-30 08:52:52 -04:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Sam Shih
25273dbd57 mmc: add mmc and sd support for MT7622
This patch add mmc and sd support for Mediatek MT7622 SoCs

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
fb80eaa9d8 mmc: mtk-sd: fix hang when data read quickly
For CMD21 tuning data, the 128/64 bytes data may coming in very
short time, before msdc_start_data(), the read data has already
come, in this case, clear MSDC_INT will cause the interrupt disappear
and lead to the thread hang.

the solution is just clear all interrupts before command was sent.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
3b0397d48b mmc: mtk-sd: add support for MediaTek MT8512/MT8110 SoCs
This patch adds mmc support for MediaTek MT8512/MT8110 SoCs.
MT8512/MT8110 SoCs puts the tune register at top layer, so
need add new code to support it.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
69373bd44a mmc: mtk-sd: Adjust the mmc tuning flow
1.Support cmd response and data tuning together.
2.Support hs400 cmd responese tuning.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03 08:44:14 -05:00
Weijie Gao
77ebea23c3 mmc: mtk-sd: add a dts property cd-active-high for builtin-cd mode
This patch adds a dts property cd-active-high for builtin-cd mode to make
it configurable instead of using hardcoded active-low.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
3c92a957ee mmc: mtk-sd: add support for MediaTek MT7620/MT7628 SoCs
This patch adds mmc support for MediaTek MT7620/MT7628 SoCs.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Fabien Parent
908d006ba5 mmc: mtk-sd: Add MT8183 SoC support
Add support for the MT8183 in the MediaTek MMC driver.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-08-20 12:20:32 -04:00
Weijie Gao
caa332336d mmc: mtk-sd: add WATCHDOG_RESET() to prevent watchdog timeout
When reading large data in once (reading 512MiB is tested on MT7623), a
watchdog timeout is triggered due to watchdog not being fed.

This patch adds WATCHDOG_RESET() to msdc_start_data() so the watchdog will
be fed every 1024 blocks are read/written.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-31 15:31:36 +08:00
Fabien Parent
b5096f1b6d mmc: mtk-sd: fix configuration option check
We either need to use IS_ENABLED(CONFIG_FOO) or CONFIG_IS_ENABLED(FOO).
IS_ENABLE(FOO) will always return false.

This commit fixes the comparison by using the CONFIG_IS_ENABLED(FOO)
syntax.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-04-23 17:57:25 -04:00
Fabien Parent
a93326681d mmc: mtk-sd: add support for MT8516
Add config for handling MT8516 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2019-04-23 17:57:25 -04:00
Fabien Parent
ba077e5f74 mmc: mtk-sd: add source_cg clock support
Some MediaTek SoC need an additional clock "source_cg". Enable
this new clock. We reuse the same clock name as in the kernel.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2019-04-23 17:57:25 -04:00
Fabien Parent
70dbbd7269 mmc: mtk-sd: fix SPL compilation when GPIO=y and SPL_GPIO=n
It is not possible to link the SPL image when CONFIG_GPIO is enabled
but CONFIG_SPL_GPIO is not.  Use the IS_ENABLED macro instead to
correctly check whether CONFIG_{SPL_}GPIO is enabled.

This commit fixes the following errors:
	* undefined reference to `dm_gpio_get_value
	* undefined reference to `gpio_request_by_name'

Signed-off-by: Fabien Parent <fparent@baylibre.com>
[trini: Move guard to fix warning in msdc_ops_get_wp()]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-26 08:13:54 -05:00
Fabien Parent
924ed344a7 mmc: mtk-sd: fix possible incomplete read ops
The code is checking for incomplete read when it see the INT_XFER_COMPL
flag, but it forget to first check whether there is anything left in the
FIFO to copy to the RX buffer. This means that sometimes we will get
errors because of erroneous incomplete read operation.

This commit fixes the driver re-ordering the code so that we first
check for data inside the RX fifo and only after check the status
of the INT_XFER_COMPL flag.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-01-26 08:13:54 -05:00
Weijie Gao
d24b693959 mmc: mtk-sd: add SD/MMC host controller driver for MT7623 SoC
This patch adds MT7623 host controller driver for accessing SD/MMC.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-28 23:04:54 -05:00