Commit graph

124 commits

Author SHA1 Message Date
Dave Liu
9be39a67c9 mpc83xx: Add support for the display of reset status
83xx processor family has many reset sources, such as
power on reset, software hard reset, software soft reset,
JTAG, bus monitor, software watchdog, check stop reset,
external hard reset, external software reset.
sometimes, to figure out the fault of system, we need to
know the cause of reset early before the prompt of
u-boot present.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-10 01:12:03 -05:00
Wolfgang Denk
f2c2a937d8 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-08-06 01:11:08 +02:00
Andy Fleming
6bf6f114dc Merge branch 'testing' into working
Conflicts:

	CHANGELOG
	fs/fat/fat.c
	include/configs/MPC8560ADS.h
	include/configs/pcs440ep.h
	net/eth.c
2007-08-03 02:23:23 -05:00
Heiko Schocher
fad6340715 make show_boot_progress () weak.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-13 09:54:17 +02:00
Stefan Roese
e9514751cf Fix malloc problem introduced with the relocation fixup for the PPC platform
The relocation fixup didn't handle the malloc pointer initialization
correctly. This patch fixes this problem. Tested successfully on 4xx.
The relocation fixup patches for 4xx will follow soon.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-11 00:43:32 +02:00
Jon Loeliger
b3aff0cb9e disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
Those always evaluated TRUE, and thus were always compiled
even when IDE really wasn't defined/wanted.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 11:19:50 -05:00
Jon Loeliger
7def6b34f9 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 18:02:11 -05:00
Wolfgang Denk
bf6a9ca9b2 Merge with /home/hs/Atronic/u-boot 2007-07-09 23:41:45 +02:00
Grant Likely
f82b3b6304 Don't set gd->reloc_off if relocation of .fixup works correctly
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:07:21 +02:00
Jon Loeliger
73f032021e lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:23:16 +02:00
Wolfgang Denk
98c440bee6 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-07-03 15:07:56 +02:00
Heiko Schocher
566a494f59 [PCS440EP] upgrade the PCS440EP board:
- Show on the Status LEDs, some States of the board.
                - Get the MAC addresses from the EEProm
                - use PREBOOT
                - use the CF on the board.
                - check the U-Boot image in the Flash with a SHA1
                  checksum.
                - use dynamic TLB entries generation for the SDRAM

Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-22 19:11:54 +02:00
Wolfgang Denk
9045f33c02 Fix config problems on SC3 board; make ide_reset_timeout work. 2007-06-08 10:24:58 +02:00
Stefan Roese
ee96088ca5 Merge with git://www.denx.de/git/u-boot.git 2007-05-18 11:20:02 +02:00
Wolfgang Denk
3a71b5ca77 Merge with /home/git/u-boot 2007-05-17 00:06:11 +02:00
Zang Roy-r61911
1b305bdc75 Search the exception table with linear algorithm
Search the exception table with linear algorithm instead of
bisecting algorithm.
Because the exception table might be unsorted.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2007-05-15 22:19:41 +02:00
Stefan Roese
343c48bd84 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-11 12:01:06 +02:00
Kim Phillips
54b2d434ae mpc83xx: replace elaborate boottime verbosity with 'clocks' command
and fix CPU: to align with Board: display text.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-05-01 12:08:36 -05:00
Wolfgang Denk
14da5f7675 Cleanup compiler warnings, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-04-20 17:43:28 +02:00
roy zang
ee460917af Merge branch 'master' into hpc2
Conflicts:

	drivers/cfi_flash.c

The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
mpc7448hpc2 board.
2007-01-22 13:15:35 +08:00
Heiko Schocher
ca43ba18e9 Added support for the SOLIDCARD III board from Eurodesign
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-11 15:44:44 +01:00
roy zang
a41969e09b Merge branch 'master' into hpc2 2007-01-04 11:10:05 +08:00
Wolfgang Denk
bc5556d62b Merge with /home/hs/TQ/u-boot-dev 2006-12-24 01:30:04 +01:00
Heiko Schocher
fa23044564 Added support for the TQM8272 board from TQ
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-12-21 17:17:02 +01:00
roy zang
9d27b3a068 Slight code clean up.
Add comments, delete duplicate define and remove spaces.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-12-04 17:56:59 +08:00
roy zang
c9c1eeed7d Fix the exception occuring in RAM table search issue.
The original search_one_table() function code can only processes the search
for the exception occurring in FLASH/ROM, because the exception and fixup
table usually locate in FLASH. If the exception address is also in
FLASH, it will be OK.
If the exception occurs in RAM, after the u-boot relocation, a
relocation offset should be added.

clean up the code in cpu/74xx_7xx/cpu.c

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-12-01 19:01:25 +08:00
roy zang
e0b369e4f7 Fix the confilcts when merging 'master' into hpc2.
The conflicts due to a new mpc7448 p3m7448 board is in the main tree.

Merge branch 'master' into hpc2

Conflicts:

	MAKEALL
	cpu/74xx_7xx/cpu.c
	cpu/74xx_7xx/cpu_init.c
	cpu/74xx_7xx/speed.c
2006-12-01 12:09:33 +08:00
Wolfgang Denk
dd520bf314 Code cleanup. 2006-11-30 18:02:20 +01:00
Timur Tabi
d239d74b1c mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
tree matches the other 8xxx trees.

Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-03 19:42:23 -06:00
roy zang
4c52783b3d General code modification for mpc7448hpc2 board support.
1. Add 7447A and 7448 processor support.
2. Add the following flags.

CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
(such as by switch on board), this flag should be set.

CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
relocates to RAM, this flag should be set.

CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
system hang in exception, this flag should be set.

There is a design issue for tsi108/109 pci configure  read. When pci scan
the slots, if there is no pci card, the tsi108/9 will cause a machine
check exception for mpc7448 processor.

Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-11-02 18:49:51 +08:00
Jon Loeliger
d22200f020 Merge branch 'master' of http://www.denx.de/git/u-boot 2006-10-19 12:03:44 -05:00
Wolfgang Denk
82165a334b Merge with /home/tur/proj/051_uboot_linux_v38b/u-boot 2006-10-18 22:27:57 +02:00
Bartlomiej Sieka
4707fb50cc Preliminary patch adding support for the MarelV38B board. 2006-10-13 21:09:09 +02:00
Jon Loeliger
daaba9859b Merge branch 'master' of http://www.denx.de/git/u-boot 2006-10-10 17:21:42 -05:00
Wolfgang Denk
2b208f5308 Move "ar" flags to config.mk to allow for silent "make -s"
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09 01:02:05 +02:00
Jon Loeliger
afa98843e4 Merge branch 'master' of http://www.denx.de/git/u-boot
Conflicts:

	board/stxxtc/Makefile
2006-09-19 08:51:24 -05:00
Stefan Roese
887e2ec9ec Add support for AMCC Sequoia PPC440EPx eval board
- Add support for PPC440EPx & PPC440GRx
- Add support for PPC440EP(x)/GR(x) NAND controller
  in cpu/ppc4xx directory
- Add NAND boot functionality for Sequoia board,
  please see doc/README.nand-boot-ppc440 for details
- This Sequoia NAND image doesn't support environment
  in NAND for now. This will be added in a short while.
Patch by Stefan Roese, 07 Sep 2006
2006-09-07 11:51:23 +02:00
Marian Balakowicz
f93286397e Add support for a saving build objects in a separate directory.
Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
2006-09-01 19:49:50 +02:00
Haiying Wang
1c8f6d8fb0 Unlock cache before kernel starts up for MPC86xx 2006-08-17 11:00:27 -05:00
Jon Loeliger
281f69ede2 Merge branch 'wd' 2006-08-09 13:36:54 -05:00
Haiying Wang
bea3f28d28 Add support for reading and writing mac addresses to or from ID EEPROM.
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.

U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).

If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.

Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2006-07-13 10:57:37 -05:00
Markus Klotzbuecher
090eb73510 Add support for TQM885D board.
Patch by Martin Krause, 20 Mar 2006

Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-07-12 15:26:01 +02:00
Marian Balakowicz
f6e5739a68 Merge: Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30 18:19:42 +02:00
Marian Balakowicz
bb105f24cc Call serial_initialize() before first debug() is used. 2006-06-30 15:27:09 +02:00
Haiying Wang
6cfea33477 Remove unneeded INIT_RAM_LOCK cache twiddling.
Correctly tracks r29 as global data pointer now.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2006-05-10 09:38:06 -05:00
Jon Loeliger
debb7354d1 Initial support for MPC8641 HPCN board. 2006-04-26 17:58:56 -05:00
Wolfgang Denk
d87080b721 GCC-4.x fixes: clean up global data pointer initialization for all boards. 2006-03-31 18:32:53 +02:00
Kumar Gala
2688e2f972 Enable address translation on MPC83xx
Patch by Kumar Gala, 10 Feb 2006
2006-02-10 15:40:06 -06:00
Wolfgang Denk
f013dacf0a Code cleanup, especially MIPS for GCC 4.x 2005-12-04 00:40:34 +01:00
Stefan Roese
d96f41e016 Add support for TQM8541/8555 boards, TQM85xx support reworked:
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
  (TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
  to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
  If problems are detected with this non default CAS latency,
  the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
  -> TSEC is first device.

Patch by Stefan Roese, 30 Nov 2005
2005-11-30 13:06:40 +01:00