Commit graph

20 commits

Author SHA1 Message Date
Neil Armstrong
277d9167cb phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY drivers
This adds support for the USB PHYs found in the Amlogic G12A SoC Family.

The USB2 PHY supports Host and/or Peripheral mode, depending on it's position.
The first PHY is only used as Host, but the second supports Dual modes
defined by the USB Control Glue HW in front of the USB Controllers.

The second driver supports USB3 Host mode or PCIE 2.0 mode, depending on
the layout of the board.
Selection is done by the #phy-cells, making the mode static and exclusive.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-09 10:38:32 +02:00
Stefan Roese
d7d7606c7e phy: Add USB PHY driver for the MT76x8 (7628/7688) SoC
This driver is derived from this Linux driver:
linux/drivers/phy/ralink/phy-ralink-usb.c

The driver sets up power and host mode, but also needs to configure PHY
registers for the MT7628 and MT7688.

I removed the reset controller handling for the USB host and device, as
it does not seem to be necessary right now. The soft reset bits for both
devices are enabled by default and testing has shown (with hackish
reset handling added), that USB related commands work identical with
or without the reset handling.

Please note that the resulting USB support is tested only very minimal.
I was able to detect one of my 3 currently available USB sticks.
Perhaps some further work is needed to fully support the EHCI controller
integrated in the MT76x8 SoC.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:53 +02:00
Neil Armstrong
82548aaad5 phy: Also allow MESON_GXM for MESON_GXL_USB_PHY
The MESON_GXL_USB_PHY is also used on the Amlogic Meson GXM SoCs.

Fixes: 2960e27e38 ("phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-03 10:23:38 -04:00
Jean-Jacques Hiblot
4b12783c8e PHY: Add phy driver for the keystone USB PHY
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14 17:59:09 +01:00
Jean-Jacques Hiblot
668257e023 phy: Add a new driver for OMAP's USB2 PHYs
This drivers supports the USB2 PHY found on omap5 and dra7 SOCs.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-12-07 16:31:46 +01:00
Marek Vasut
6cfc3d664e phy: rcar: Add R-Car Gen3 PHY driver
Add a PHY driver for the R-Car Gen3 which allows configuring
USB OTG PHY on Gen3 into host mode and toggles VBUS in case a
dedicated regulator is present.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-10-03 12:56:13 +02:00
Ramon Fried
92454e47bc phy: db410c: Add MSM USB PHY driver
Add a PHY driver for the Qualcomm dragonboard 410c which
allows switching on/off and resetting the phy connected
to the EHCI controllers and USBHS controller.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30 13:00:36 -04:00
Marek Vasut
664258887d phy: rcar: Add R-Car Gen2 PHY driver
Add a PHY driver for the R-Car Gen2 which allows configuring the mux
connected to the EHCI controllers and USBHS controller.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-08-14 11:31:19 +02:00
Patrice Chotard
3b29121678 phy: add support for STM32 usb phy controller
This patch adds phy tranceiver driver for STM32 USB PHY
Controller (usbphyc) that provides dual port High-Speed
phy for OTG (single port) and EHCI/OHCI host controller
(two ports).
One port of the phy is shared between the two USB controllers
through a UTMI+ switch.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-18 13:17:31 +02:00
Neil Armstrong
2960e27e38 phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers
The Amlogic Meson GXL and GXM (simple variant) embeds up to 3 USB2 PHYs
and an USB3 PHY. This patch adds drivers for these for the standard generic
PHY interface and supports the power-on/off calls and set the Host mode by
default.
They are based on the excellent work from Martin Blumenstingl merged in linux.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-11 17:22:07 +02:00
Álvaro Fernández Rojas
8e948c6ff1 phy: add support for bcm6318 usbh phy
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-03-21 23:23:13 +01:00
Álvaro Fernández Rojas
f55c1538bf phy: add support for bcm6368 usbh phy
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-03-21 23:23:13 +01:00
Álvaro Fernández Rojas
190c36b975 phy: add support for bcm6358 usbh phy
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-03-21 23:23:13 +01:00
Álvaro Fernández Rojas
bcb9b502d5 phy: add support for bcm6348 usbh phy
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-03-21 23:23:13 +01:00
Patrice Chotard
b7ca56dcda usb: phy: Add STi USB2 PHY
This is the generic phy driver for the picoPHY ports
used by USB2/1.1 controllers. It is found on STiH407 SoC
family from STMicroelectronics.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-22 07:39:57 -04:00
Jean-Jacques Hiblot
3b63db37ad phy: add a NO-OP phy driver
This driver is used to stub PHY operations in a driver (USB, SATA).
This is useful when the 'client' driver (USB, SATA, ...) uses the PHY
framework and there is no actual PHY harwdare to drive.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-07-28 23:34:44 +02:00
Jean-Jacques Hiblot
6b26aaef08 pipe3: Fix broken dependency
ARCH_OMAP2 has been renamed ARCH_OMAP2PLUS in commit a93fbf4a78
("ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig")

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10 14:26:05 -04:00
Jean-Jacques Hiblot
982082d9ce drivers: phy: add PIPE3 phy driver
This phy is found on omap platforms with sata capabilities.
Except for the part related to the DM and the PHY framework, the code is
basically a copy paste from arch/arm/mach-omap2/pipe3-phy.c

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09 12:14:16 -06:00
Jean-Jacques Hiblot
86322f5982 dm: test: Add tests for the generic PHY uclass
Those tests check:
- the ability for a phy-user to get a phy based on its name or its index
- the ability of a phy device (provider) to manage multiple ports
- the ability to perform operations on the phy (init,deinit,on,off)
- the behavior of the uclass when optional operations are not implemented

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09 12:14:16 -06:00
Jean-Jacques Hiblot
72e5016f87 drivers: phy: add generic PHY framework
The PHY framework provides a set of APIs to control a PHY. This API is
derived from the linux version of the generic PHY framework.
Currently the API supports init(), deinit(), power_on, power_off() and
reset(). The framework provides a way to get a reference to a phy from the
device-tree.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09 12:14:16 -06:00