phy: add support for bcm6318 usbh phy

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

drivers/phy/Kconfig

@@ -59,6 +59,13 @@ config SPL_NOP_PHY
 	  This is useful when a driver uses the PHY framework but no real PHY
 	  hardware exists.
 
+config BCM6318_USBH_PHY
+	bool "BCM6318 USBH PHY support"
+	depends on PHY && ARCH_BMIPS
+	select POWER_DOMAIN
+	help
+	  Support for the Broadcom MIPS BCM6318 USBH PHY.
+
 config BCM6348_USBH_PHY
 	bool "BCM6348 USBH PHY support"
 	depends on PHY && ARCH_BMIPS

drivers/phy/Makefile

@@ -7,6 +7,7 @@
 
 obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
 obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
+obj-$(CONFIG_BCM6318_USBH_PHY) += bcm6318-usbh-phy.o
 obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o
 obj-$(CONFIG_BCM6358_USBH_PHY) += bcm6358-usbh-phy.o
 obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o

drivers/phy/bcm6318-usbh-phy.c

@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Derived from linux/arch/mips/bcm63xx/usb-common.c:
+ *	Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
+ *	Copyright 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <power-domain.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <dm/device.h>
+
+/* USBH Setup register */
+#define USBH_SETUP_REG		0x00
+#define USBH_SETUP_IOC		BIT(4)
+
+/* USBH PLL Control register */
+#define USBH_PLL_REG		0x04
+#define USBH_PLL_SUSP_EN	BIT(27)
+#define USBH_PLL_IDDQ_PWRDN	BIT(31)
+
+/* USBH Swap Control register */
+#define USBH_SWAP_REG		0x0c
+#define USBH_SWAP_OHCI_DATA	BIT(0)
+#define USBH_SWAP_OHCI_ENDIAN	BIT(1)
+#define USBH_SWAP_EHCI_DATA	BIT(3)
+#define USBH_SWAP_EHCI_ENDIAN	BIT(4)
+
+/* USBH Sim Control register */
+#define USBH_SIM_REG		0x20
+#define USBH_SIM_LADDR		BIT(5)
+
+struct bcm6318_usbh_priv {
+	void __iomem *regs;
+};
+
+static int bcm6318_usbh_init(struct phy *phy)
+{
+	struct bcm6318_usbh_priv *priv = dev_get_priv(phy->dev);
+
+	/* enable pll control susp */
+	setbits_be32(priv->regs + USBH_PLL_REG, USBH_PLL_SUSP_EN);
+
+	/* configure to work in native cpu endian */
+	clrsetbits_be32(priv->regs + USBH_SWAP_REG,
+			USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN,
+			USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA);
+
+	/* setup config */
+	setbits_be32(priv->regs + USBH_SETUP_REG, USBH_SETUP_IOC);
+
+	/* disable pll control pwrdn */
+	clrbits_be32(priv->regs + USBH_PLL_REG, USBH_PLL_IDDQ_PWRDN);
+
+	/* sim control config */
+	setbits_be32(priv->regs + USBH_SIM_REG, USBH_SIM_LADDR);
+
+	return 0;
+}
+
+static struct phy_ops bcm6318_usbh_ops = {
+	.init = bcm6318_usbh_init,
+};
+
+static const struct udevice_id bcm6318_usbh_ids[] = {
+	{ .compatible = "brcm,bcm6318-usbh" },
+	{ /* sentinel */ }
+};
+
+static int bcm6318_usbh_probe(struct udevice *dev)
+{
+	struct bcm6318_usbh_priv *priv = dev_get_priv(dev);
+	struct power_domain pwr_dom;
+	struct reset_ctl rst_ctl;
+	struct clk clk;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	int ret;
+
+	addr = devfdt_get_addr_size_index(dev, 0, &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->regs = ioremap(addr, size);
+
+	/* enable usbh clock */
+	ret = clk_get_by_name(dev, "usbh", &clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_enable(&clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_free(&clk);
+	if (ret < 0)
+		return ret;
+
+	/* enable power domain */
+	ret = power_domain_get(dev, &pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	ret = power_domain_on(&pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	ret = power_domain_free(&pwr_dom);
+	if (ret < 0)
+		return ret;
+
+	/* perform reset */
+	ret = reset_get_by_index(dev, 0, &rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_deassert(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = reset_free(&rst_ctl);
+	if (ret < 0)
+		return ret;
+
+	mdelay(100);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(bcm6318_usbh) = {
+	.name = "bcm6318-usbh",
+	.id = UCLASS_PHY,
+	.of_match = bcm6318_usbh_ids,
+	.ops = &bcm6318_usbh_ops,
+	.priv_auto_alloc_size = sizeof(struct bcm6318_usbh_priv),
+	.probe = bcm6318_usbh_probe,
+};