Commit graph

160 commits

Author SHA1 Message Date
Simon Glass
9d8665b709 i2c: Convert CONFIG_POWER_I2C et al to Kconfig
This converts the following to Kconfig:
   CONFIG_POWER_I2C
   CONFIG_POWER_LEGACY

They are handled at the same time due to a dependency between them.
Update the Makefile rule to use legacy power only in U-Boot proper.
Unfortunately a separate rule is needed in SPL to be able to build
legacy power.  Add SPL related symbols for both, to allow for SPL-only
usage.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
[trini: More SPL related cleanups, reword commit message]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04 12:26:02 -04:00
Simon Glass
29d7153ec3 power: Rename CONFIG_POWER to CONFIG_POWER_LEGACY
This option is used in pre-driver model code and much of it has never
been converted to driver model.

We want to add a new option to enable power support, so we can use a
simple rule in the Makefile. Rename this one, which is really about
a particular implementation of power.

Also update the pmic.h header file so it either includes the legacy
API or the driver model one.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-09-04 12:26:02 -04:00
Gowtham Tammana
6fdbd2b093 power: pmic: tps65941: Add compatible for LP876441
TI J7200 EVM has lp876441 pmic that is similar to tps65941. Add support
for same with existing driver with new compatible.

Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/20210714205300.17424-2-g-tammana@ti.com
2021-07-15 17:56:04 +05:30
Stephan Gerhold
3f6e4ec7c3 power: pmic: Add driver for ST-Ericsson AB8500 via PRCMU
All devices based on ST-Ericsson Ux500 use a PMIC similar to AB8500
(Analog Baseband). There is AB8500, AB8505, AB9540 and AB8540
although in practice only AB8500 and AB8505 are relevant since the
platforms with AB9540 and AB8540 were cancelled and never used in
production.

In general, the AB8500 PMIC uses I2C as control interface, where the
different register banks are represented as separate I2C devices.
However, in practice AB8500 is always connected to a special I2C bus
on the DB8500 SoC that is controlled by the power/reset/clock
management unit (PRCMU) firmware.

Add a simple driver that allows reading/writing registers of the
AB8500 PMIC. The driver directly accesses registers from the PRCMU
parent device (represented by syscon in U-Boot). Abstracting it
further (e.g. with the i2c uclass) would not provide any advantage
because the PRCMU I2C bus is always just connected to AB8500 and
vice-versa.

The ab8500.h header is mostly taken as-is from Linux (with some
minor adjustments) to allow using similar code in both Linux and
U-Boot.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-14 16:48:14 -04:00
Konstantin Porotchkin
fec8c900c8 power: regulator: Add support for regulator-force-boot-off
Add support for regulator-force-boot-off DT property.
This property can be used by the board/device drivers for
turning off regulators on early init stages as pre-requisite
for the other components initialization.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-29 07:38:57 +02:00
Jaehoon Chung
67696abf1f power: pmic: remove pmic_max77696.c file
Remove pmic_max77696.c file.
The maintaining pmic_max77696.c file is useless.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12 14:25:30 -04:00
Peng Fan
4eeb9fe847 power: pca9450: add a new parameter for power_pca9450_init
Currently PCA9450 might have address 0x25 or 0x35, so let user
choose the address.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-08 09:18:29 +02:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Tim Harvey
2767d881f0 power: pmic: add driver for Monolithic Power mp5416
This adds basic register access and child regulator binding
for the Monolithic MP5416 Power Management IC which integrates
four DC/DC switching converters and five LDO regulators.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-01-18 15:23:06 -05:00
Simon Glass
8a8d24bdf1 dm: treewide: Rename ..._platdata variables to just ..._plat
Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00
Simon Glass
a2703ce10c dm: Remove uses of device_bind_offset()
This function is not needed since the standard device_bind() can be used
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 07:58:18 -07:00
Simon Glass
e12052b322 dm: core: Rename device_bind() to device_bind_offset()
This function is not necessary anymore, since device_bind_ofnode() does
the same thing and works with both flattree and livetree.

Rename it to indicate that it is special.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 07:58:17 -07:00
Peng Fan
16cc5ad0b4 power: regulator: add dummy helper
Add dummy helper to enabling the header could be included when
DM REGULATOR not enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-10-23 16:38:33 -04:00
Simon Glass
10552377d4 x86: apl: Add power-management definitions
Add SCI and power-state definitions required by ACPI tables. Fix the
license to match the original source file.

Als update the guard on acpi_pmc.h to avoid an error when buiding ASL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-25 11:27:16 +08:00
Tom Rini
7c3cc6f106 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- New timer API to allow delays with a 32-bit microsecond timer
- Add dynamic ACPI structs (DSDT/SSDT) generations to the DM core
- x86: Enable ACPI table generation by default
- x86: Enable the copy framebuffer on Coral
- x86: A few fixes to FSP2 with ApolloLake
- x86: Drop setup_pcat_compatibility()
- x86: Primary-to-Sideband Bus minor fixes
2020-07-17 08:04:48 -04:00
Simon Glass
11e27ae92b pmc: Move common registers to the header file
These registers need to be accesses from ACPI code, so move them to the
header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17 14:32:24 +08:00
Sébastien Szymanski
eefd93e7f8 power: pmic_pca9450: fix PCA9450A I2C address
Quoting Ye Li from NXP:

    "We have confirmed with PMIC team, 0x35 is used only on early chips
    and not used any more. 0x25 is the final address."

Fix it by merging power_pca9450a_init and power_pca9450b_init into one
function power_pca9450_init.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2020-07-16 11:20:14 +02:00
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Patrick Delaunay
e9a20f8a19 ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDR
Need to increase the LPDDR2/LPDDR3 the voltage vdd2_ddr: buck2
form 1.2V to 1.25V for 32bits configuration.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:20:50 +01:00
Martin Fuzzey
7ae22d8479 power: regulator: add driver for Dialog DA9063 PMIC
Add a driver for the regulators in the the DA9063 PMIC.

Robert Beckett: move regulator modes to header so board code can set
modes. Correct mode mask used in ldo_set_mode.
Add an option CONFIG_SPL_DM_REGULATOR_DA9063.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-27 19:54:20 -05:00
Martin Fuzzey
483880c490 power: pmic: add driver for Dialog DA9063 PMIC
This adds the basic register access operations and child regulator
binding (if a regulator driver exists).

Robert Beckett: simplify accesses by using bottom bit of address as
offset overflow. This avoids the need to track which page we are on.
Add an option CONFIG_SPL_DM_PMIC_DA9063.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-27 19:54:20 -05:00
Tom Rini
deb287b561 ---------------------------------------------------------------------
Add i.MX8MP SoC and EVK board
 Update README for i.MX8MN EVK and fix mmc env
 Add pca9450 driver
 --------------------------------------------------------------------
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4WDPkPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et30w0L/RGSJLeO460ULkMQMGEkbMLODzWinIuVSUUe
 wEGikQZwI4AiDWX1NA57Dpx7uVF/ADa/NT2x9YLZL8VPHgzuU7RDp57pdBymU0Wk
 k/kDqSPVkIA0CX8iF/l092vOOIKecIpxpEXblRYs+Az7Vusrwm6SxQ3hjSn6KgpY
 gtu/VB+XizejiYmE5hJhu8cvMpAeCrJ0a+qPJC+hVsvFC2wV3NoqJspMOIUt+rPm
 UCv4uSisSWf2MgR2rEYbX9IDgu7S3hcj/8Ml4f9aqQQBciS4X/Af+iUjZL/mXY2K
 ZerDGQhC92TRmTj9Ir6mf8CEAdt0scsNgTVvteN/evP85K25s2l7yrYWjyp5H/vm
 tao0H/Lr8gKlLKgMSgdLixoV8eaMHPE4I/BD+DGVIK1rOQ35zzYTJRd2PIxg7GiP
 7orW29rJrPMAMDBbeEi657u/zUS7ZUzkrLWnIIoFurUfZ83pjlqlxcT1zfZ0juJk
 z8iQKU4oKdN4gL5zQPbyqCHcCdlDJw==
 =YoPF
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

---------------------------------------------------------------------
Add i.MX8MP SoC and EVK board
Update README for i.MX8MN EVK and fix mmc env
Add pca9450 driver
--------------------------------------------------------------------

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08 15:24:50 -05:00
Ye Li
22172f6b7f power: Add new PMIC PCA9450 driver
PCA9450 PMIC series is used to support iMX8MM (PCA9450A) and
iMX8MN (PCA9450B). Add the PMIC driver for both PCA9450A and PCA9450B.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:08 +01:00
Simon Glass
6c6d88e142 x86: power: Add an ACPI PMC uclass
Intel x86 SoCs have a power manager/controller which handles several
power-related aspects of the platform. Add a uclass for this, with a few
useful operations.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:10 +08:00
Vasily Khoruzhick
5ef1e02e99 power: fan53555: add support for Silergy SYR82X and SYR83X
SYR82X and SYR83X are almost identical to FAN53555, the only difference
is different die ID and revision, voltage ranges and steps.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Tom Rini
086e391bc4 Merge tag 'u-boot-rockchip-20191110' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Add support for rockchip pmic rk805,rk809, rk816, rk817
- Add rk3399 board Leez support
- Fix bug in rk3328 ram driver
- Adapt SPL to support ATF bl31 with entry at 0x40000
- Fix the u8 type comparision with '-1'.
- Fix checkpatch warning for multi blank line and review signature.
2019-11-11 14:19:32 -05:00
Joseph Chen
ee30068fa5 power: pmic: rk809: support rk809 pmic
The RK809 is a Power Management IC (PMIC) for multimedia
and handheld devices. They contains the following components:
    - Regulators(5*BUCKs, 9*LDOs, 2*SWITCHes)
    - RTC
    - Clocking

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:34:10 +08:00
Joseph Chen
b4a35574b3 power: pmic: rk817: support rk817 pmic
The RK817 is a Power Management IC (PMIC) for multimedia
and handheld devices. They contains the following components:
    - Regulators(4*BUCKs, 1* BOOST, 9*LDOs, 1*SWITCH)
    - RTC
    - Clocking

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:33:52 +08:00
Elaine Zhang
b62280745e power: pmic: rk805: support rk805 pmic
The RK805 are a Power Management IC (PMIC) for multimedia
and handheld devices. They contains the following components:
    - Regulators(4*BUCKs, 3*LDOs)
    - RTC
    - Clocking

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:32:51 +08:00
Elaine Zhang
addd062bea power: pmic: rk816: support rk816 pmic
The RK816 is a Power Management IC (PMIC) for multimedia
and handheld devices. They contains the following components:
    - Regulators(4*BUCKs, 1*BOOST, 6*LDOs, 1*SWITCH)
    - RTC
    - Clocking

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:32:41 +08:00
Joseph Chen
11406b8f7e dm: regulator: support regulator more state
support parse regulator standard property:
regulator-off-in-suspend;
regulator-init-microvolt;
regulator-suspend-microvolt:
 regulator_get_suspend_enable
 regulator_set_suspend_enable
 regulator_get_suspend_value
 regulator_set_suspend_value

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:31:09 +08:00
Keerthy
6b86dd0c1e power: pmic: tps65941: Add support for tps65941 family of PMICs
Add support to bind the regulators/child nodes with the pmic.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:16 -05:00
Patrick Delaunay
234a60244c pmu: stpmic1: change specific NVM api to MISC
Use MISC u-class to export the NVM register (starting at 0xF8 offset)
and avoid specific API.
- SHADOW have offset < 0.
- NVM have register > 0

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
178a415534 stpmic1: program pmic to keep only the debug unit on
Depending on backup register value, we maintain the debug unit
powered-on for debugging purpose.
Only BUCK1 is required for powering the debug unit, so revert
the setting for all the other power lanes, except BUCK3 that
has to be always on.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Matti Vaittinen
21b02414f1 regulator: bd718x7: support ROHM BD71837 and BD71847 PMICs
BD71837 and BD71847 is PMIC intended for powering single-core,
dual-core, and quad-core SoC’s such as NXP-i.MX 8M. BD71847
is used for example on NXP imx8mm EVK.

Add regulator driver for ROHM BD71837 and BD71847 PMICs.
BD71837 contains 8 bucks and 7 LDOS. BD71847 is reduced
version containing 6 bucks and 6 LDOs. Voltages for DVS
bucks (1-4 on BD71837, 1 and 2 on BD71847) can be adjusted
when regulators are enabled. For other bucks and LDOs we may
have over- or undershooting if voltage is adjusted when
regulator is enabled. Thus this is prevented by default.

BD718x7 has a quirk which may leave power output disabled
after reset if enable/disable state was controlled by SW.
Thus the SW control is only allowed for BD71837  bucks
3 and 4 by default. The impact of this limitation must be
evaluated board-by board and restrictions may need to be
modified. (Linux driver get's these limitations from DT and we
may want to implement same on u-Boot driver).

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-19 15:18:47 +02:00
Matti Vaittinen
1023c8739b regulator: bd71837: copy the bd71837 pmic driver from NXP imx u-boot
https://source.codeaurora.org/external/imx/uboot-imx

cherry picked, styled and merged commits:
- MLK-18387 pmic: Add pmic driver for BD71837: e9a3bec2e95a
- MLK-18590 pmic: bd71837: Change to use new fdt API: acdc5c297a96

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-06-11 10:42:48 +02:00
Patrick Delaunay
31e45a1a9e stpmic1: add NVM update support in fuse command
Add functions to read/update the non volatile memory of STPMIC1
(8 bytes-register at 0xF8 address) and allow access
with fuse command (bank=1, word > 0xF8).

For example:

STM32MP> fuse read 1 0xf8 8
Reading bank 1:

Word 0x000000f8: 000000ee 00000092 000000c0 00000002
Word 0x000000fc: 000000f2 00000080 00000002 00000033

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
db4ff0df65 stpmic1: update register names
Alignment with  STPMIC1 datasheet
  s/MAIN_CONTROL_REG/MAIN_CR/g
  s/MASK_RESET_BUCK/BUCKS_MRST_CR/g
  s/MASK_RESET_LDOS/LDOS_MRST_CR/g
  s/BUCKX_CTRL_REG/BUCKX_MAIN_CR/g
  s/VREF_CTRL_REG/REFDDR_MAIN_CR/g
  s/LDOX_CTRL_REG/LDOX_MAIN_CR/g
  s/USB_CTRL_REG/BST_SW_CR/g
  s/STPMIC1_NVM_USER_STATUS_REG/STPMIC1_NVM_SR/g
  s/STPMIC1_NVM_USER_CONTROL_REG/STPMIC1_NVM_CR/g
and update all the associated defines.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
42f01aacfd power: rename stpmu1 to official name stpmic1
Alignment with kernel driver name & binding
introduced by https://patchwork.kernel.org/cover/10761943/
to use the final marketing name = STPMIC1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
d46c22b3fd power: stpmu1: rename files to stpmic1
Prepare file modification for kernel alignment and
rename driver to stpmic1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12 16:09:13 +02:00
Krzysztof Kozlowski
e66d1cb3c2 regulator: Add support for ramp delay
Changing voltage and enabling regulator might require delays so the
regulator stabilizes at expected level.

Add support for "regulator-ramp-delay" binding which can introduce
required time to both enabling the regulator and to changing the
voltage.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:19 +09:00
Lokesh Vutla
cc4a224af2 power: regulator: Introduce regulator_set_enable_if_allowed api
regulator_set_enable() api throws an error in the following three cases:
- when requested to disable an always-on regulator
- when set_enable() ops not provided by regulator driver
- when enabling is actually failed.(Error returned by the regulator driver)

Sometimes consumer drivers doesn't want to track the first two scenarios
and just need to worry about the case where enabling is actually failed.
But it is also a good practice to have an error value returned in the
first two cases.

So introduce an api regulator_set_enable_if_allowed() which ignores the
first two error cases and returns an error as given by regulator driver.
Consumer drivers can use this api need not worry about the first two
error conditions.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-09 12:50:22 -07:00
Jean-Jacques Hiblot
fb1b7712ad power: make most tps drivers and the twl4030 driver compatible with DM_I2C
Those driver are not DM drivers per se (not using the PMIC/regulator
framework) and are using the legacy I2C API. Make them compatible with
the DM_I2C API.

This impacts the following drivers:
- palmas (used by am57xx/dra7xx evms)
- tps65218 (used by am43xx evms)
- tps65217 and tps65910 (used by am335x evms and am335x boneblack vboot)
- twl4030 (used by omap3_logicpd)
- tps65217 (used by brppt1)
- twl6030

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10 06:17:30 +01:00
Christophe Kerello
844f9bf1ee power: regulator: stpmu1: add power off delay
This patch adds a delay when regulators are disabled.
This delay is set to 5 ms to cover all use cases.
The worst use case actually seen is during a SD card power cycle.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-07-19 16:31:36 -04:00
Trent Piepho
7da7ff5491 power: pmic: Let PFUZE3000 see all 256 registers
The PFUZE3000 uses registers addresses up to 0xff.

The DM pfuze100 driver supports both pfuze100 and pfuze3000.  Allow it
to use the device type to return the correct number of registers.

Also rename the too generic PMIC_NUM_OF_REGS enumeration value for
pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the
pfuze100 enumeration value PFUZE100_NUM_OF_REGS.

Cc: Peng Fan <Peng.Fan@freescale.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-27 09:47:46 +02:00
Lukasz Majewski
b8a6d6777b pmic: Add support for setting transmission length in uclass private data
The struct uc_pmic_priv's trans_len field stores the number of types to
be transmitted per PMIC transfer.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18 08:27:26 +02:00
Marcel Ziswiler
de42975141 power: as3722: add as3722_ldo_set_voltage signature to header file
Just like the already present as3722_sd_set_voltage() add the currently
missing signature of the as3722_ldo_set_voltage() function to its header
file.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:21 -07:00
Marcel Ziswiler
4616e33b6a power: as3722: fix ldo_get/set_enable for ldo index bigger than 7
Fix ldo_get_enable() and ldo_set_enable() functions for LDOs with an
index > 7. Turns out there are actually two separate AS3722_LDO_CONTROL
registers AS3722_LDO_CONTROL0 and AS3722_LDO_CONTROL1. Actually make use
of both. While at it also actually use the enable parameter of the
ldo_set_enable() function which now truly allows disabling as opposed to
only enabling LDOs.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10 16:34:20 -07:00
Tom Rini
4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00