Commit graph

41959 commits

Author SHA1 Message Date
Stefan Herbrechtsmeier
61e745d131 mmc: zynq: Add fdt max-frequency support
The maximum supported peripheral clock frequency of the zynq depends on
the IO routing. The MIO and EMIO support a maximum frequency of 50 MHz
respectively 25 MHz. Use the max-frequency value of the device tree to
determine the maximal supported peripheral clock frequency.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:47 +01:00
Stefan Herbrechtsmeier
e0f4de1afc mmc: zynq: Determine base clock frequency via clock framework
The zynq_sdhci controller driver use CONFIG_ZYNQ_SDHCI_MAX_FREQ as base
clock frequency but this clock is not fixed and depends on the hardware
configuration. Additionally the value of CONFIG_ZYNQ_SDHCI_MAX_FREQ
doesn't match the real base clock frequency of SDIO_FREQ. Use the clock
framework to determine the frequency at run time.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:47 +01:00
Stefan Herbrechtsmeier
9bb803d5b0 clk: zynq: Add optional ethernet emio clock source support
Add support for the optional ethernet emio clock source to the zynq
clock framework driver.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:46 +01:00
Stefan Herbrechtsmeier
781745bd87 zynq: Move zynq to clock framework
Move the zynq to clock framework and remove unused functions as well as
the CONFIG_ZYNQ_PS_CLK_FREQ configuration.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:46 +01:00
Stefan Herbrechtsmeier
3a64b25364 clk: zynq: Add zynq clock framework driver
Add a clock framework driver for the zynq platform. The driver is based
on the platform zynq clock driver but reworked to use static functions
instead of run-time generated objects even for unused clocks.
Additionally the CONFIG_ZYNQ_PS_CLK_FREQ is replaced by the
ps-clk-frequency from the device tree.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:46 +01:00
Stefan Herbrechtsmeier
f96fccba71 zynq: Remove zynq_clk_get_name function
The zynq_clk_get_name function is only used once inside the clock
driver. Replace the function call with the one-line code.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:46 +01:00
Stefan Herbrechtsmeier
e18c0f667e zynq: Move static clock names into separate array
The clock names are static and correspond to the clock id. Separate
them from the dynamic filled clock array.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:46 +01:00
Stefan Herbrechtsmeier
c7abb824dd zynq: Add clk framework support to zynq timer
If available use the clock framework to calculate the clock rate of the
zynq timer.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:46 +01:00
Stefan Herbrechtsmeier
eff55c55c7 net: zynq: Add clk framework support to zynq ethernet driver
If available use the clock framework to set the tx clock rate of the
zynq ethernet controller.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:46 +01:00
Stefan Herbrechtsmeier
a259243e9d net: zynq: Don't overwrite gem_rclk_ctrl with default value
The gem[0-1]_rclk_ctrl registers control the source of the rx clock,
control and data signals and configure via ps7_init function. Don't
overwrite the register with the default value.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-17 10:22:46 +01:00
Tom Rini
85d0bea153 Prepare v2017.03-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-13 11:47:45 -05:00
Tom Rini
a8d052b500 Xilinx fixes for v2017.03
- defconfig alignment
 - Topic.nl board updates
 - Minor microblaze comment fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlihweUACgkQykllyylKDCFTZACfScfvrJoK1NO89R89JE6iH6iX
 7y4AnA5wwTrqrOL+GOFPgco+mhCJj6Bo
 =w3BL
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-fixes-for-v2017.03' of git://www.denx.de/git/u-boot-microblaze

Xilinx fixes for v2017.03

- defconfig alignment
- Topic.nl board updates
- Minor microblaze comment fix
2017-02-13 09:35:40 -05:00
Masahiro Yamada
c77c7db58e i2c: sandbox: remove code snippet from Kconfig help
With the Kconfig re-sync with Linux 4.10, characters such as
'}', ';' in Kconfig help message cause warnings:

$ make defconfig
*** Default configuration is based on 'sandbox_defconfig'
drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}'
drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';'

Drop the Device Tree fragment from the help.

Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-13 07:18:25 -05:00
Masahiro Yamada
bf7ab1e70f kconfig: re-sync with Linux 4.10
Re-sync all files under the scripts/kconfig directory with
Linux 4.10.

Some parts include U-Boot own modification.  I made sure to not
revert the following commits:

 5b8031ccb4 ("Add more SPDX-License-Identifier tags")
 192bc6948b ("Fix GCC format-security errors and convert sprintfs.")
 da58dec866 ("Various Makefiles: Add SPDX-License-Identifier tags")
 20c20826ef ("Kconfig: Enable usage of escape char '\' in string values")

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-12 14:31:25 -05:00
Masahiro Yamada
554c73c025 flash: compile common/flash.c iif CONFIG_MTD_NO_FLASH is enabled
The whole of common/flash.c is guarded by #if defined() ... #endif.
Move the conditional to common/Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-12 14:30:31 -05:00
Masahiro Yamada
e856bdcfb4 flash: complete CONFIG_SYS_NO_FLASH move with renaming
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
not completed. Finish this work by the tool.

During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
than those of "#ifdef CONFIG_SYS_NO_FLASH".  Flipping the logic will
make the code more readable.  Besides, negative meaning symbols do
not fit in obj-$(CONFIG_...) style Makefiles.

This commit was created as follows:

[1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

[3] Rename the instances in defconfigs by the following:
  find . -path './configs/*_defconfig' | xargs sed -i \
  -e '/CONFIG_SYS_NO_FLASH=y/d' \
  -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

[4] Change the conditionals by the following:
  find . -name '*.[ch]' | xargs sed -i \
  -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
  -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
  -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
  -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

[5] Modify the following manually
  - Rename the rest of instances
  - Remove the description from README
  - Create the new Kconfig entry in drivers/mtd/Kconfig
  - Remove the old Kconfig entry from common/Kconfig
  - Remove the garbage comments from include/configs/*.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-12 14:30:25 -05:00
Tom Rini
a931e9975b Merge git://git.denx.de/u-boot-samsung 2017-02-11 10:38:40 -05:00
Tom Rini
b16f6804b4 Merge git://git.denx.de/u-boot-rockchip 2017-02-11 10:38:21 -05:00
Michal Simek
1d82e2c15c microblaze: Fix endif macro command
Use correct name in endif comment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10 13:59:36 +01:00
Mike Looijmans
1520fe60d9 configs/topic_miami.h: Correct kernel_size in default environment
The kernel partition in QSPI is 0x440000 large, not 0x400000. Fix this
in the environment, otherwise the kernel will fail to boot if it occupies
more space.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10 13:59:17 +01:00
Mike Looijmans
c38e981707 topic_miami(plus) defconfig: Enable DFU RAM support
Allow sending firmware to RAM. Without this, the DFU support was not
of much use.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10 13:59:17 +01:00
Mike Looijmans
d018db40a3 topic_miami_defconfig: Remove NFS and NET support
On the miami board, ethernet is accessed via logic. To use it, one
would have to program logic first and then set up the rgmii conversion
block as well. Not likely to ever be used, so disable network support
by default to save some space.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10 13:58:25 +01:00
Michal Simek
2e0583b67e xilinx: Align defconfig with current Kconfig order
Keep all defconfig sorted to ensure the smallest diff.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-02-10 13:57:35 +01:00
Simon Glass
5d3be0f81c exynos: Drop large alignment for SDRAM parameters
We don't ever search for these so there is no need for a 4KB alignment.
It just wastes space.

Drop this and use the standard 4-byte alignment.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-02-10 18:51:51 +09:00
Tom Rini
f1cc97764b Merge branch 'master' of git://git.denx.de/u-boot-video 2017-02-09 14:54:09 -05:00
Eddie Cai
6f27976455 rockchip: rename miniarm to tinker board
Miniarm is the internal project code. Now it is officially named Tinker board.
So rename it.

Signed-off-by: Eddie Cai <eddie.cai@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09 12:10:59 -07:00
Romain Perier
1caec07e5c rockchip: Enable ETH address randomization for the firefly-rk3288
This commit enables ethernet MAC address randomization on the
firefly-rk3288. It removes the error at startup 'ethernet@ff290000
address not set'.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09 12:10:59 -07:00
Jacob Chen
5235753d15 rockchip: firefly: configs: use spl back to brom
Keep it same with other boards otherwise i have to write special script for it..

Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09 12:10:59 -07:00
Jacob Chen
3d1bf166bf rockchip: configs: move env offset to common header
To reduce redundant code.

Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09 12:10:59 -07:00
Simon Glass
f568ac219c rockchip: Correct MAINTAINER entry for chromebook_minnie
This is wrong at present, so genboardscfg.py gives the following warnings:

WARNING: no status info for 'chromebook_minnie'
WARNING: no maintainers for 'chromebook_minnie'

Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-09 12:10:59 -07:00
Jacob Chen
a8830a1247 rockchip: dts: rk3288: correct sdram setting for miniarm
miniarm board use lpddr3

Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Added 'rockchip:' prefix to subject:
Signed-off-by: Simon Glass <sjg@chromium.org>

Change-Id: I84c3679dab2dbd8d01c1ebfd22220946d07c03cd
2017-02-09 12:10:59 -07:00
Tom Rini
2a48b3a2c4 omap_hsmmc.c: Fix build warning on non-omap3
It was incorrect to always include "asm/arch-omap3/mux.h" constantly.
This introduced warnings on non-omap3 where certain values will conflict
between the various families.  Conditionally guard the inclusion in
order to correct the problem.

Fixes: 6aca17c9b7 ("drivers: mmc: omap_hsmmc: Fix IO Buffer on OMAP36xx")
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-09 13:41:28 -05:00
Tom Rini
e1a71f8b33 Merge branch 'master' of git://git.denx.de/u-boot-net 2017-02-09 11:56:35 -05:00
Tom Rini
6f57b19857 Merge branch 'master' of git://git.denx.de/u-boot-mmc 2017-02-09 11:56:19 -05:00
Tom Rini
0959649dc6 omap3_logic: Switch to simple malloco in SPL
To save more space, switch to simple malloc here.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-09 11:55:57 -05:00
Tom Rini
e0dff9b860 qemu-x86_64_defconfig: Disable CONFIG_BOARD_EARLY_INIT_F
The qemu-x86* targets do not want to enable this.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-09 08:52:18 -05:00
Fiach Antaw
a0269bb6e8 mmc: init mmc block devices on probe
MMC devices accessed exclusively via the driver model were not
being initialized before being exposed as block devices, causing
issues in scenarios where the MMC device is first accessed via the
uclass block interface.

Signed-off-by: Fiach Antaw <fiach.antaw@uqconnect.edu.au>
2017-02-09 20:37:06 +09:00
Adam Ford
6aca17c9b7 drivers: mmc: omap_hsmmc: Fix IO Buffer on OMAP36xx
On the OMAP36xx/37xx the CONTROL_WKUP_CTRL register has
a field (bit 6) named GPIO_IO_PWRDNZ.  If 0, the IO buffers which
are related to GPIO_126, 127 and 129 are disabled. Some boards may
need this for MMC. After the PBIAS is configured, this bit should
be set high to enable these GPIO pins.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-09 20:37:06 +09:00
Jaehoon Chung
d14f1d511a mmc: ftsdc021_sdhci: remove the ftsdc021_sdhci.c
ftsdc021_sdhci.c is dead file.
There is no reason to maintain this host controller.
Removes the entire ftsdc021_sdhci.c.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-09 20:37:05 +09:00
Jaehoon Chung
02ad33aa3a mmc: mmc-uclass: use the fixed devnum with alias node
If there are alias nodes as "mmc", use the devnum as alias index
number.
This patch is for fixing a problem of Exynos4 series.
Problem is the below thing.

Current legacy mode:
EXYNOS DWMMC: 0, SAMSUNG SDHCI: 1

After using DM:
SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1

Dev index is swapped.
Then u-boot can't find the kernel image..because it is already set to 0 as mmcdev.
If change from legacy to DM, also needs to touch all exynos4 config file.
For using simply, just supporting the fixed devnum with alias node is better than it.

Usage:
alaise {
	....
	mmc0 = &sdhci2; /* eMMC */
	mmc1 = &sdhci1; /* SD */
	...
}

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09 20:37:05 +09:00
Jaehoon Chung
22940af121 arm: dts: trats: add the pmic node for using DM
To use driver-model adds the pmic node for max8997.
This is used as kernel device-tree in Linux.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09 14:28:53 +09:00
Jaehoon Chung
1a5a05dade power: pmic: add the max8997 controller for DM
Add the max8997 controller for Driver model.
Exynos4210 is using max8997 pmic controller.
(pmic_max8997.c should be deprecated.)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09 14:28:37 +09:00
Tom Rini
576a085c1d Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2017-02-08 22:04:32 -05:00
John Haechten
a5fd13ad19 net: phy: MSCC Add Support for VSC8530-VSC8531-VSC8540-VSC8541
Signed-off-by: John Haechten <john.haechten@microsemi.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-08 16:32:58 -06:00
Tom Rini
21342d4aed Merge git://git.denx.de/u-boot-dm 2017-02-08 16:24:44 -05:00
Robert P. J. Day
7582ddce13 GPIO: Correct doc typo "confguration" -> "configuration"
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2017-02-08 16:24:29 -05:00
Lars Poeschel
55c854c612 Remove unused symbol CONGIG_CMD_STORAGE from board configs
Albeit it's a typo, neither CONGIG_CMD_STORAGE nor CONFIG_CMD_STORAGE
are used anywhere, so remove the define from the board configs.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-02-08 16:24:28 -05:00
Masahiro Yamada
e9d33e7326 cmd: move CONFIG_CMD_UNZIP and CONFIG_CMD_ZIP to Kconfig
CONFIG_CMD_ZIP is not defined by any board.  I am moving
CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family.

I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP"
is better for this platform.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
2017-02-08 16:24:28 -05:00
Masahiro Yamada
1f4f5e52e5 arm64: fix comment in relocate_64.S
There are two typos in the comment "invalide i-cache is enabled".
We can fix it by
  invalide -> invalidate
  is       -> if

Or, if we want to match the comment to the code, we can say
"skip invalidating i-cache if disabled".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08 16:24:27 -05:00
Phil Edworthy
8ccdba8b8c keystone2: Rename local CONFIG_ symbol
CONFIG_SPL_STACK_SIZE is not a config option, so rename it.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
2017-02-08 16:24:27 -05:00